ATF22V10C-15SC - 15ns 500-Gate EEPROM PLD | Microchip
料号: ATF22V10C-15SC ✓ 量产中ATF22V10C-15SC 概述
A programmable logic device is a semiconductor in which the user implements digital functions by programming an internal logic array. The ATF22V10C family belongs to the SPLD hierarchy, combining a regular macrocell structure with nonvolatile Flash programming. Compared with a mask-programmed ASIC, it supports design changes without fabricating a new photomask; compared with a microcontroller, it provides deterministic combinational and registered logic without executing firmware.
Key characteristics include 10 macrocells, a nominal 15 ns speed grade, 5 V operation, and low standby power dissipation down to 10 uA typical. The device family is specified over 5 V ± 10% for military and industrial temperature ranges and over 5 V ± 5% for other indicated operating grades. Its nonvolatile Flash configuration retains the implemented logic when power is removed, while the latch feature can hold inputs at their previous logic states.
Typical uses include interface translation, control logic, address decoding, state-machine sequencing, industrial automation, and legacy equipment upgrades. The 24-SOIC outline also makes the ATF22V10C-15SC practical for conventional through-hole assembly rather than requiring a fine-pitch surface-mount redesign.
Designers should verify timing against the selected system clock, provide the required programming and power-sequencing controls, and confirm that the JEDEC fuse map matches the intended design. The Microchip ATF22V10C family is specified for speeds down to 5 ns across the broader family, but the -15 suffix identifies the 15 ns grade of this particular device.
This product page combines the manufacturer electrical characteristics with practical guidance for programming, pin assignment, timing analysis, and system integration. It also distinguishes documented replacement paths from package-compatible alternatives so engineers can assess PCB impact before committing to a substitution.
直接替换替代料: ATF22V10C-15SC ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ATF22V10C-15SC (相同外形与封装尺寸) ——差异在于 Device Type, Package, Input Latch Feature, Latch Feature, Logic Capacity.
ATF22V10C-15JI
✅ 直接替换联系询价
查看数据手册 →ATF22V10C-15SI
✅ 直接替换📋 参考替代料(不在目录中)
ATF22V10C-15JC
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →ATF22V10C-15SC 最大额定值与电气特性
| Device Type | EEPLD |
| Product Type | Simple Programmable Logic Device (SPLD) |
| Programmable Logic Architecture | 10 macrocells |
| Equivalent Logic Capacity | 500 gates |
| Device Speed | 15 ns |
| Nominal Supply Voltage | 5 V |
| Industrial and Military Supply Range | 4.5 V to 5.5 V |
| Other Indicated Supply Range | 4.75 V to 5.25 V |
| Memory Technology | Electrically erasable Flash memory |
| Minimum Standby Power Dissipation | 10 uA typical |
| 封装 | 24-SOIC |
| Package Width | 7.50 mm |
| Lead Pitch | 1.27 mm |
| Input Latch Feature | Holds inputs at previous logic states |
ATF22V10C-15SC 7.50 mm 引脚配置指南
ATF22V10C-15SC(7.50 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: ATF22V10C-15SC.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATF22V10C-15SC 适用于 6 应用s: Industrial Control and State Sequencing, Legacy Interface Translation, Address Decoding and Glue Logic, Battery-Powered Portable Equipment, Instrumentation Signal Conditioning, Security and Access Control Logic.
Industrial Control and State Sequencing
The ATF22V10C-15SC suits deterministic industrial control logic that must retain its programmed function through power cycles. Its 10 macrocells can implement state transitions, interlocks, output decoding, and interface conditions without a microcontroller in simple subsystems. The 15 ns grade supports designs in which the SPLD participates directly in the logic path. Because the configuration is stored in electrically erasable Flash memory, field updates can be performed without a mask or custom replacement part.
推荐
Legacy Interface Translation
ATF22V10C-15SC can bridge dissimilar digital interfaces by converting signal polarities, translating enable and status signals, and resolving timing differences. The 24-SOIC package is convenient for repair and modernization boards that use conventional through-hole assembly. Engineers should derive the timing constraints from the external devices and verify that the 15 ns grade provides sufficient setup and propagation margin in the complete path.
推荐
Address Decoding and Glue Logic
The ATF22V10C-15SC is appropriate for address decoding, chip-select generation, command qualification, and miscellaneous glue logic around processors or memory. Ten macrocells provide a compact implementation for Boolean equations and registered control paths. Its nonvolatile Flash configuration ensures that decoding remains stable after power removal, while the 24-SOIC outline supports straightforward PCB assembly and maintenance in established industrial systems.
推荐
Battery-Powered Portable Equipment
ATF22V10C-15SC can implement low-power wake-up, mode control, and signal routing in portable equipment where a compact nonvolatile control block is useful. The ATF22V10C family specifies power dissipation as low as 10 uA typical, allowing a design to retain control logic without frequent reconfiguration. The 24-SOIC package is larger than modern leadless packages, so board-area optimization may require comparing other ATF22V10C outlines.
推荐
Instrumentation Signal Conditioning
ATF22V10C-15SC can implement digital compensation, range selection, trigger qualification, and status decoding in test and measurement equipment. The device combines deterministic 15 ns logic with nonvolatile configuration, which is useful when control settings must survive power cycling. Its role is primarily digital conditioning around analog or mixed-signal circuits; analog accuracy, noise, and calibration remain functions of the surrounding signal chain.
推荐
Security and Access Control Logic
ATF22V10C-15SC can implement fixed credential logic, keypad scanning, alarm qualification, and access-control sequencing in compact systems. Flash configuration permits programmed logic to be updated without removing the device, while deterministic macrocell behavior supports repeatable timing analysis. For safety-critical installations, engineers must verify the device grade, environmental limits, fail-safe behavior, and any applicable sector-specific certification requirements independently.
推荐
推荐产品汇总
工程参考数据: ATF22V10C-15SC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 24-SOIC |
| Brand | Microchip Technology |
| Device Type | EEPLD |
| Macrocells | 10 |
| Logic Capacity | 500 gates |
| Speed Grade | 15 ns |
| Nominal Supply Voltage | 5 V |
| Configuration Technology | Electrically erasable Flash memory |
| Lowest Stated Power Dissipation | 10 uA typical |
关键差异点
- Electrically erasable Flash configuration (对比 GAL22V10)
- Deterministic 15 ns logic grade (对比 ATF22V10CQ-15PC)
- Low-power family architecture (对比 ATF22V10C-15SC)
设计说明
Do not substitute a different package merely because the ATF22V10C family shares the same device name. The ATF22V10C-15SC uses a 24-SOIC outline, while ATF22V10CQ-15PC uses 24-TSSOP. Confirm pin numbering, body width, lead pitch, assembly footprint, and programming signals before considering a family migration. For GAL22V10 migrations, also verify JEDEC fuse-map compatibility and compare the AC and DC characteristics.
Treat clock, programming, and configuration inputs as timing-sensitive nets. Use the manufacturer timing definitions to establish setup, hold, and propagation requirements for every connected device. Avoid long branches, unprotected stubs, and unnecessary switching-node proximity. When a 15 ns device operates at the upper end of its timing capability, include real board propagation delay and external-device uncertainty in the timing analysis.
Place the required supply bypass capacitor close to the power and ground pins and provide a low-impedance connection between the capacitor and device. Keep the loop area small to limit transient current and radiated noise. Select capacitor voltage rating and tolerance for a nominal 5 V rail, and evaluate operation across the 4.5 V to 5.5 V industrial or military supply range when those limits apply to the selected grade.
Validate the programmed fuse map against the final schematic before production. A correct package and nominal part number do not guarantee that a different configuration file will produce equivalent logic. Run functional simulation, boundary-condition tests, and power-cycle tests that verify the Flash configuration remains intact. For legacy GAL22V10 designs, explicitly test every product term and registered output affected by possible fuse-map or timing differences.
合规信息
The ATF22V10C-15SC is a programmable logic IC rather than an automotive-qualified component. Compliance declarations were not identified in the product information, so the relevant statuses remain unknown.