ATMEGA32U4RC-AU - 8-bit AVR MCU, 16MHz, 32KB Flash, USB | Microchip
部品番号: ATMEGA32U4RC-AU ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $5.8 | $5.80 |
| 10 | $5.3 | $53.00 |
| 100 | $4.8 | $480.00 |
| 500 | $4.35 | $2,175.00 |
| 1,000 | $3.95 | $3,950.00 |
ATMEGA32U4RC-AU 概要
A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, program memory, data memory and peripheral functions into one chip, forming the lowest layer of the embedded-systems hierarchy. The ATmega32U4 belongs to the AVR ATmega family of 8-bit RISC microcontrollers from Atmel, now Microchip Technology, and is distinguished within that family by its native USB 2.0 device capability, which removes the need for an external USB-to-serial converter chip.
Key features include the advanced RISC architecture with 131 powerful instructions, most executing in a single clock cycle; a 12-channel 10-bit ADC for analog sensing; a JTAG interface for on-chip debugging; 32 general-purpose I/O lines across ports B, C, D, E and F; and a supply voltage range of 4.5 V to 5.5 V. The integrated USB controller supports full-speed (12 Mbps) and low-speed (1.5 Mbps) device operation, enabling direct USB HID keyboards, mice, MIDI devices and CDC serial applications.
Architecturally, the 32 KB self-programming Flash supports bootloader firmware updates over USB, a capability famously leveraged by the Arduino Leonardo and Micro boards. Hardware multiply, three timers plus a high-speed timer/counter with PWM outputs (OC0A/OC0B/OC1A/OC1B/OC1C/OC3A/OC4A/OC4B/OC4D), USART, SPI, two-wire interface (I2C/TWI) and on-chip debug round out the peripheral set.
Typical applications include USB HID peripherals (keyboards, gamepads, MIDI controllers), Arduino-compatible maker and educational boards, industrial control nodes, and USB-connected instrumentation. The 16 MHz clock and 5 V operation give robust noise margins for industrial environments.
When designing with this device, note the 4.5 V to 5.5 V supply window: 3.3 V systems require the L grade or a level-shifting strategy. Place the UCAP capacitor on pin 6 close to the device for USB regulator stability, and route the D+/D- USB pair as a 90-ohm differential pair.
This page synthesizes verified distributor data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
ドロップイン代替品: ATMEGA32U4RC-AU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATMEGA32U4RC-AU （同一形状・フットプリント） — 相違点: Package, Debug Interface, Instruction Set, EEPROM, Core Processor.
クイック比較ツール — 並列比較する代替部品を選択:
ATMEGA32U4-AU
✅ ドロップイン✓ 在庫あり
$4.25 / 個
データシートを見る →ATMEGA32U4-AUR
✅ ドロップイン✓ 在庫あり
$5.2 / 個
データシートを見る →ATMEGA16U4-AU
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$2.19 / 個
データシートを見る →ATMEGA16U4RC-AU
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
ATMEGA32U4RC-AU 最大定格＆電気的特性
| Core Processor | AVR |
| Core Size | 8-Bit |
| Speed | 16 MHz |
| Program Flash Memory | 32 KB (16K x 16) |
| SRAM | 2.5 KB |
| EEPROM | 1 KB |
| 電源電圧 | 4.5 V to 5.5 V |
| USB Controller | USB 2.0 full-speed/low-speed device |
| ADC | 12-channel, 10-bit |
| General Purpose I/O | 32 |
| Debug Interface | JTAG (on-chip-debug) |
| Instructions | 131 (most single-clock cycle) |
| 動作温度 | -40C to +85C (TA) |
| パッケージ | 44-TQFP (10 x 10 mm, 1.0 mm height, 0.8 mm pitch) |
| 実装タイプ | Surface Mount |
| Packaging | Tray |
| Life Cycle Stage | ACTIVE |
| RoHS | Compliant (Y) |
ATMEGA32U4RC-AU 44-tqfp (10 x 10 mm, 1.0 mm height, 0.8 mm pitch) ピン配置ガイド
ATMEGA32U4RC-AU (44-tqfp (10 x 10 mm, 1.0 mm height, 0.8 mm pitch) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATMEGA32U4RC-AU.
詳細は データシート をご参照ください。
主な用途
ATMEGA32U4RC-AU の用途: 6 件s: USB HID Keyboards and Gamepads, Arduino Leonardo / Micro Compatible Boards, Industrial Control and Automation Nodes, MIDI Controllers and Audio Gear, USB Data Loggers and Instruments, Robotics and Embedded Control.
USB HID Keyboards and Gamepads
The ATMEGA32U4RC-AU is the de facto standard MCU for custom USB HID devices. Its native USB 2.0 full-speed device controller enumerates directly as a keyboard, mouse or joystick with no external USB-to-serial IC, and LUFA or Arduino HID libraries provide mature class-driver firmware. The 12-channel 10-bit ADC reads analog thumbsticks and potentiometers at 10-bit resolution, while the hardware PWM outputs (OC1A/OC1B/OC1C, OC4A-4D) drive per-key RGB LED brightness. The 16 MHz clock and deterministic single-cycle execution give low-latency scan timing; a full 104-key matrix scans in well under 1 ms. 5 V operation matches USB bus voltage directly, simplifying bus-powered designs.
おすすめ
Arduino Leonardo / Micro Compatible Boards
Maker and educational boards based on the ATmega32U4 benefit from native USB and the Arduino Leonardo core: the chip acts simultaneously as the application processor and the USB interface, removing the second USB-to-serial converter used on Uno-class boards. The 32 KB Flash accommodates the Arduino core plus user sketches with USB CDC serial, Keyboard and Mouse classes enabled simultaneously. Bootloader firmware (Caterina) lives in self-programming Flash sections, allowing USB firmware updates without an external programmer. The 44-TQFP 10 x 10 mm package suits the standard 0.8 mm pitch hobbyist assembly, and 5 V logic keeps shields and sensors of the classic Arduino ecosystem directly compatible.
おすすめ
Industrial Control and Automation Nodes
In factory automation, the ATMEGA32U4RC-AU's -40C to +85C operating range and 4.5 V to 5.5 V supply deliver the noise margins industrial 24 V systems demand after local regulation. The 12-channel 10-bit ADC digitizes sensor loops, the TWI (I2C) and SPI buses connect RTCs, displays and memory, and the USART links to RS-485 transceivers for long-haul fieldbus communication. The JTAG on-chip-debug interface enables boundary scan and non-intrusive debugging in production fixtures. Its USB controller additionally provides a field-service port so technicians reconfigure or re-flash nodes with a laptop, avoiding disassembly of control cabinets.
おすすめ
MIDI Controllers and Audio Gear
USB MIDI class devices are a natural fit for the ATMEGA32U4RC-AU: the native full-speed USB controller implements the USB MIDI class without custom drivers on host operating systems, and the multi-channel hardware timers generate precise timing. The 10-bit ADC reads mod wheels, expression pedals and analog faders, while hardware PWM smooths LED ring and display backlighting. With 131 single-cycle instructions and hardware multiply, note-on/note-off scanning and velocity calculations complete in microseconds. The 1 KB EEPROM stores user presets such as channel mappings and calibration tables that survive power cycling, which is essential for gigging musicians.
おすすめ
USB Data Loggers and Instruments
Portable measurement devices use the ATMEGA32U4RC-AU to log sensor data locally and present itself as a USB mass-storage or CDC serial device when plugged into a PC. The 12-channel 10-bit ADC captures up to 12 analog sources; the 2.5 KB SRAM buffers samples while the 1 KB EEPROM holds calibration constants. Timer/counter input capture (ICP1, ICP3) supports frequency and period measurement for flow and pulse sensors. Because the USB device controller runs from the same 5 V rail as the logic, no level shifting or separate USB PHY supply is needed, reducing BOM cost and board area in handheld instruments.
おすすめ
Robotics and Embedded Control
Small robots and mechatronic controllers leverage the ATMEGA32U4RC-AU's mix of USB, PWM and analog inputs. Six hardware PWM outputs (OC0A/OC0B, OC1A/OC1B/OC1C, OC3A, plus the OC4D channel) drive servo and DC motor control with 16-bit resolution on Timer1. The 10-bit ADC reads current-sense shunts and battery voltage, and the USART/SPI interfaces connect motor drivers and IMU modules. A USB virtual COM port provides real-time telemetry and tuning from a PC during development. The 32 general-purpose I/O lines give sufficient headroom for encoders, limit switches and user interface elements without port expanders.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATMEGA32U4RC-AU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATMEGA32U4-AU | ATMEGA32U4-AUR | ATMEGA16U4-AU | ATMEGA16U4RC-AU |
|---|---|---|---|---|---|
| Brand | Microchip Technology (Atmel) | Microchip Technology (Atmel) | Microchip Technology (Atmel) | Microchip Technology (Atmel) | Microchip Technology (Atmel) |
| Package | 44-TQFP (10x10 mm) | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same |
| Program Flash | 32 KB | 32 KB | 32 KB | 16 KB | 16 KB |
| SRAM | 2.5 KB | 2.5 KB | 2.5 KB | 1.25 KB | 1.25 KB |
| Max Clock Speed | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| USB Controller | USB 2.0 full-speed/low-speed device | USB 2.0 full-speed/low-speed device | USB 2.0 full-speed/low-speed device | USB 2.0 full-speed/low-speed device | USB 2.0 full-speed/low-speed device |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Life Cycle Status | Active | Active | Active | Active | Active |
主な差別化要因
- Native USB 2.0 full-speed device controller on-chip （vs ATMEGA328P-AU)
- Double the program memory of the 16U4 family members （vs ATMEGA16U4-AU)
- Industrial temperature range and 5 V noise margin （vs ATMEGA32U4RC-MU)
設計ノート
USB signal integrity is the dominant layout constraint for this device. Route the D+ (pin 4) and D- (pin 3) traces as a tightly coupled 90-ohm differential pair, keep the pair shorter than 100 mm and avoid stubs or via transitions. The UCAP pin (pin 6) requires the datasheet-specified 1 uF capacitor placed within a few millimeters of the pin because it stabilizes the internal 3.3 V USB transceiver regulator. UVcc (pin 2) should be fed through a series ferrite bead and 1 uF decoupling from VBUS. Add ESD protection such as a USBLC6-2SC6 right at the USB connector.
The ATMEGA32U4RC-AU operates from 4.5 V to 5.5 V and is not rated for 3.3 V operation in this suffix. In USB bus-powered designs, regulate VBUS (5 V nominal, up to 5.25 V) directly into VCC with bulk and 100 nF decoupling at pins 7, 12, 23 and 37, keeping total decoupling capacitance per the datasheet. If the design also draws from a battery or 24 V industrial rail, use a 5 V LDO with adequate dropout margin and place bulk capacitance near the MCU. Brown-out detection should be enabled via fuse so Flash writes during USB bootloading do not corrupt memory during supply dips.
Fuse and lock-bit configuration is the most common bring-up failure. The 16 MHz crystal requires CKOUT/fuse settings for an external crystal rather than the default internal RC oscillator; wrong fuses can leave the USB controller clocked incorrectly and enumeration will fail silently. The PE2/HWB pin must be driven or fused correctly for bootloader entry, and the RESET pin needs a 10 kOhm pull-up with an optional ISP header for recovery. When migrating from ATMEGA16U4 variants, verify firmware fits in 16 KB Flash. Always check the Microchip errata sheet for USB controller silicon issues before production.
コンプライアンス情報
RoHS marked Y per PartGenie compliance notes for ATMEGA32U4RC-AU. REACH status and MSL rating not specified in verified data. AEC-Q100 qualification not claimed in provided data.
