ATSAMC20J18A-ANT - 256KB Flash Cortex-M0+ MCU, 48MHz, 64-TQFP | Microchip
部品番号: ATSAMC20J18A-ANT ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $4.32 | $4.32 |
| 10 | $3.95 | $39.50 |
| 100 | $3.51 | $351.00 |
| 500 | $3.12 | $1,560.00 |
| 1,000 | $2.78 | $2,780.00 |
ATSAMC20J18A-ANT 概要
What is a Cortex-M0+ MCU? The ARM Cortex-M0+ is a 32-bit RISC processor core designed for energy-efficient embedded applications. It sits at the bottom of the Cortex-M hierarchy (M0+ -> M0 -> M3 -> M4 -> M7), prioritizing low power consumption and small die area over peak compute. Microcontrollers in this class integrate the CPU core with Flash, SRAM, and peripherals on a single die, forming the foundation of the microcontroller (MCU) -> embedded controller -> semiconductor device taxonomy. They serve as the primary processing element in countless IoT, industrial, and consumer products.
Key features of the ATSAMC20J18A-ANT include a true 5V-tolerant I/O design, an integrated CAN-FD peripheral for modern automotive and industrial networking, a Peripheral Touch Controller (PTC) for capacitive touch interfaces, and an advanced analog block containing 12-bit ADC channels, a 10-bit DAC, and analog comparators. The device also provides six SERCOM modules, each configurable as USART, I2C, or SPI, giving the designer extensive flexibility for connecting mixed peripherals without external glue logic.
On the architecture side, the ATSAMC20J18A-ANT implements the Cortex-M0+ core with a von Neumann bus and Thumb-2 instruction set only. The 256 KB Flash is organized for single-cycle access from the CPU and supports live firmware upgrades through a bootloader mapped into a protected region. The 32 KB SRAM is large enough for typical TCP/IP stacks, USB device class drivers, or graphics framebuffers when paired with an external display controller. A Memory Protection Unit (MPU) and Micro Trace Buffer round out the debugging and safety features.
Typical applications include industrial CAN-FD nodes, building automation controllers, low-end human-machine interface (HMI) panels with capacitive touch, appliance motor control via PWM, and sensor aggregation hubs in factory automation. The 5V tolerance removes the need for level shifters when interfacing with legacy 5V industrial sensors, while the CAN-FD peripheral addresses the migration from Classical CAN to higher-bandwidth CAN-FD networks.
A key design consideration is power budgeting. Although the Cortex-M0+ core is highly efficient, peripherals such as the ADC and PTC can dominate current consumption in always-on sensor applications. Using Sleep modes with selective peripheral run-stall control is essential when targeting deep battery operation. A 1uF plus 100nF decoupling capacitor pair should be placed within 5 mm of the VDDCORE pin.
This page synthesizes distributor pricing, same-family drop-in alternatives (SAM C20 64-TQFP variants), and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: ATSAMC20J18A-ANT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATSAMC20J18A-ANT （同一形状・フットプリント） — 相違点: Package, ADC, Core, Flash Memory, Mounting Type.
クイック比較ツール — 並列比較する代替部品を選択:
ATSAMC20J18A-AUT
✅ ドロップイン✓ 在庫あり
$3.1 / 個
データシートを見る →ATSAMC21J18A-ANT
✅ ドロップイン✓ 在庫あり
$4.1 / 個
データシートを見る →ATSAMC20J17A-ANTS2
✅ ドロップイン✓ 在庫あり
$2.46 / 個
データシートを見る →ATSAMC20J16A-ANT
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ATSAMC20G18A-ANT
✅ ドロップイン✓ 在庫あり
$2.34 / 個
データシートを見る →ATSAMD20J18A-AU
✅ ドロップイン✓ 在庫あり
$2.15 / 個
データシートを見る →ATSAMC20J18A-ANT 最大定格＆電気的特性
| Core | ARM Cortex-M0+ |
| Bit Width | 32-bit |
| 最大クロック周波数 | 48 MHz |
| Program Memory Size | 256 KB Flash |
| EEPROM Emulation | 8 KB independent Flash block |
| RAM Size | 32 KB SRAM |
| Supply Voltage (VDDIO) | 2.7 V to 5.5 V (5V tolerant I/O) |
| Number of I/O Pins | 52 (approx.) |
| ADC | 12-bit, multiple channels |
| DAC | 10-bit |
| Communication Interfaces | 6x SERCOM (USART/I2C/SPI), CAN-FD, I2S |
| Touch Controller | Peripheral Touch Controller (PTC) |
| パッケージ | 64-TQFP (10x10 mm) with exposed pad |
| 動作温度範囲 | -40C to +105C |
| 実装タイプ | Surface Mount |
| MPU | Memory Protection Unit |
| Trace | Micro Trace Buffer |
| RoHS ステータス | Compliant |
ATSAMC20J18A-ANT 64-tqfp (10x10 mm) with exposed pad ピン配置ガイド
ATSAMC20J18A-ANT (64-tqfp (10x10 mm) with exposed pad パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATSAMC20J18A-ANT.
詳細は データシート をご参照ください。
主な用途
ATSAMC20J18A-ANT の用途: 7 件s: Industrial CAN-FD Node, Building Automation Controller, Capacitive Touch HMI Panel, Appliance Motor Control via PWM, Sensor Aggregation Hub, Low-End Industrial IoT Edge Node, Consumer Appliance Main Controller.
Industrial CAN-FD Node
The ATSAMC20J18A-ANT's integrated CAN-FD peripheral and 5V-tolerant I/O make it ideal for industrial CAN-FD nodes interfacing directly with legacy 5V sensors on factory floors. The Cortex-M0+ core at 48 MHz provides sufficient compute for protocol conversion, while the 256 KB Flash stores full CANopen or J1939 stacks. The 6x SERCOM channels handle RS-485, UART sensor readouts, and SPI ADC sampling alongside CAN-FD traffic. Unlike 3.3V-only Cortex-M0+ parts, no level shifters are needed for 5V industrial sensor heads, reducing BOM cost and PCB area in machine-control cabinets.
おすすめ
Building Automation Controller
Building automation systems (HVAC, lighting, blinds) benefit from the ATSAMC20J18A-ANT's Peripheral Touch Controller (PTC) for capacitive touch keypads and 12-bit ADC for analog sensor inputs such as NTC thermistors or 0-10V light sensors. The 5V tolerance simplifies integration with industrial HVAC actuators that operate at 24V signals through resistor dividers. With 256 KB Flash, the device can host a full Modbus or BACnet application stack locally, and the 32 KB SRAM is ample for short message buffers and frame scheduling logic. Compared with bare 8-bit MCUs, it offers better performance per MHz for state machines.
おすすめ
Capacitive Touch HMI Panel
The ATSAMC20J18A-ANT's integrated Peripheral Touch Controller (PTC) and 5V-tolerant I/O are well matched to low-end human-machine interface panels where 5V display drivers and LED indicators are still common. The PTC supports mutual-capacitance and self-capacitance touch patterns for sliders, wheels, and buttons, all driven from a single chip without an external touch IC. The 32 KB SRAM fits display refresh buffers for small character or graphic OLEDs, and the 6x SERCOM channels drive SPI displays, I2C sensors, and UART debug ports simultaneously. This eliminates external touch ICs and level shifters in entry-level HMIs.
おすすめ
Appliance Motor Control via PWM
The ATSAMC20J18A-ANT's 12-bit ADC, multiple 16-bit timer/counter PWM channels, and Cortex-M0+ compute handle single-phase and small three-phase BLDC/PMSM motor control for appliances like fans, pumps, and small compressors. The 5V I/O tolerance eases integration with 5V gate drivers and Hall-effect sensors commonly found in white goods. With 256 KB Flash, the device can store full sensorless FOC or trapezoidal commutation algorithms plus safety routines. Compared to dedicated motor control ICs, this approach offers more flexibility for tuning and integrating UI in the same chip.
おすすめ
Sensor Aggregation Hub
Factory sensor aggregation hubs use the ATSAMC20J18A-ANT's 6 SERCOM channels to consolidate UART, I2C, and SPI sensor data from multiple analog and digital sensors, then forward preprocessed readings over CAN-FD. The Cortex-M0+ at 48 MHz can run basic filtering (moving average, outlier rejection) without offloading to a higher-tier MCU. The 256 KB Flash supports local configuration storage and bootloader over CAN, while the 32 KB SRAM fits sensor buffers for ~1000 samples per second aggregate throughput. Compared with discrete UART expanders, this consolidates logic into one chip.
おすすめ
Low-End Industrial IoT Edge Node
Industrial IoT edge nodes benefit from the ATSAMC20J18A-ANT's combination of 5V-tolerant I/O, CAN-FD, and 6x SERCOM channels to handle a mix of legacy 5V analog inputs and modern digital buses. The Cortex-M0+ at 48 MHz supports lightweight TLS stacks and Modbus TCP gateways when paired with an external Ethernet MAC. The 256 KB Flash accommodates full IoT firmware with OTA update support, and the 32 KB SRAM is sufficient for small message queues and crypto scratch buffers. Compared with parts lacking 5V I/O, it removes external level shifters in mixed-voltage industrial installations.
おすすめ
Consumer Appliance Main Controller
Consumer appliances such as washing machines, dishwashers, and induction cooktops use the ATSAMC20J18A-ANT's 5V I/O tolerance to directly drive 5V relay boards and triac interfaces without level translation. The 12-bit ADC reads multiple NTC and water-level sensors, and the 16-bit PWM timers control motor speeds and heater phases. The 256 KB Flash supports full UI firmware plus capacitive touch via the integrated PTC, replacing separate touch ICs. Compared to 8-bit PIC alternatives, the Cortex-M0+ accelerates state machines and improves UI responsiveness without raising system cost significantly.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATSAMC20J18A-ANT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATSAMC20J18A-AUT | ATSAMC21J18A-ANT | ATSAMC20J17A-ANT | ATSAMC20J16A-ANT | ATSAMD20J18A-AU |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same |
| Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Flash Memory | 256 KB | 256 KB | 256 KB | 128 KB | 128 KB | 256 KB |
| Supply Voltage | 2.7V to 5.5V (5V tolerant I/O) | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 1.8V to 3.6V |
| CAN-FD | Yes (integrated) | Yes | Yes | Yes | Yes | No (Classical CAN only) |
| Automotive Grade (AEC-Q100) | No (industrial -40C to +105C) | Yes (AEC-Q100) | No | No | No | No |
主な差別化要因
- True 5V-tolerant I/O with integrated CAN-FD （vs ATSAMD20J18A-AU)
- 256 KB Flash vs lower-density SAM C20 variants （vs ATSAMC20J16A-ANT)
- Industrial 105C operating range, non-automotive （vs ATSAMC20J18A-AUT)
設計ノート
Place a 1uF plus 100nF decoupling capacitor pair within 5 mm of the VDDCORE pin and a 100nF on each VDDIO pin. The internal 1.62V LDO derives core voltage from VDDIO, so VDDIO decoupling directly impacts core stability. For battery-powered designs, use the SAM C20 SleepWalking mode to gate peripheral clocks while keeping SERCOM triggers active. Estimated: at 48 MHz active current is ~9 mA, dropping to ~3 uA in deep sleep with RTC running.
Route the SWDIO/SWDCLK debug pair as a short matched-length trace (<50 mm) and avoid routing high-frequency signals adjacent to them. The 64-TQFP exposed pad must be soldered to a continuous ground pour with thermal vias to dissipate power and reduce ground bounce. If the CAN-FD peripheral is enabled, place the ATA6563 transceiver within 25 mm of the CAN pins and keep the CANH/CANL traces as a 100 ohm differential pair.
Do not apply voltages above 5.5V to VDDIO; the 5V tolerance applies only to I/O pins, not to the supply rail itself. The Peripheral Touch Controller (PTC) requires careful PCB layout with guarded traces for reliable capacitive touch sensing - refer to Microchip AN2668 for the touch PCB guidelines. When migrating from the ATSAMD20J18 to this C20 variant, verify peripheral register changes because SAM C20 adds CAN-FD but D20 has different timer mappings.
コンプライアンス情報
RoHS compliant per Microchip product page. Industrial temperature grade -40C to +105C. For AEC-Q100 automotive qualification use the ATSAMC20J18A-AUT suffix instead.
