ATSAMD20E17A-MU - 48MHz Cortex-M0+ 128KB Flash MCU | Microchip
部品番号: ATSAMD20E17A-MU ✓ 生産中ATSAMD20E17A-MU 概要
An MCU is an integrated circuit containing a processor core, program memory, data memory, peripherals, and communication interfaces on one semiconductor device. The ATSAMD20E17A-MU follows the hierarchy of MCU, embedded microcontroller, 32-bit microcontroller, ARM Cortex-M0+ microcontroller, and low-power flash MCU. Its Cortex-M0+ architecture supports efficient event-driven control while the integrated flash allows firmware and configuration data to be stored directly on the chip.
Three principal characteristics define the device: a 48 MHz operating-clock maximum, 128 KB of flash memory, and 16 KB of SRAM. The 128 KB flash capacity provides room for application firmware, while the 16 KB SRAM supports working variables, protocol buffers, and real-time control state. Operation at 1.8 V, 2.5 V, or 3.3 V makes the part suitable for low-voltage embedded systems whose rails remain within these stated operating conditions. The 32-VQFN package also supports compact, high-density PCB layouts.
The ATSAMD20E17A-MU integrates a 12-bit ADC and a 10-bit DAC, as identified in the manufacturer product documentation. These mixed-signal resources allow a single microcontroller to acquire analog sensor data and generate an analog output without requiring separate converters. The SAM D20 device family is designed around an Arm Cortex-M0+ core and embedded peripherals intended for connected control, sensing, and metering systems. Exact peripheral counts, timer configurations, and converter performance characteristics should be confirmed in the manufacturer datasheet before final schematic or firmware allocation.
Typical applications include smart-home sensor nodes, utility and resource meters, industrial control modules, consumer appliances, and compact embedded data-acquisition equipment. In a metering design, the ADC can sample a sensor signal while SRAM holds calibration data and protocol state. In home automation, the flash can hold application firmware and configuration parameters. A switching supply can power the device from a 1.8 V, 2.5 V, or 3.3 V rail while the Cortex-M0+ processor handles low-duty-cycle processing.
PCB implementation requires careful treatment of the exposed pad and its thermal connection. Place input and output decoupling capacitors close to the appropriate supply pins, route sensitive analog inputs away from fast-switching nodes, and connect the exposed pad to a properly sized ground plane using the manufacturer land-pattern and thermal-layout guidance. Confirm exposed-pad soldering, mask, and paste requirements before releasing the PCB artwork.
This page organizes the core ATSAMD20E17A-MU specifications, verified source links, same-package replacement candidates, application guidance, and design considerations into an engineering-focused reference. Use the manufacturer datasheet for the authoritative pin-description table, electrical limits, programming information, and package drawings.
ドロップイン代替品: ATSAMD20E17A-MU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATSAMD20E17A-MU (同一形状・フットプリント) — 相違点: SRAM, Package, Series, DAC, Flash Memory.
ATSAMD20E18A-MU
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATSAMD21E18A-MFT
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATSAMD21E17A-MU
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATSAM3N1AA-MU
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATSAM3S1BA-MUR
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATSAMD20E17A-MU 最大定格&電気的特性
| Architecture | 32-bit ARM Cortex-M0+ |
| 最大クロック周波数 | 48 MHz |
| Flash Memory | 128 KB |
| Flash Organization | 128K x 8 bits |
| SRAM | 16 KB |
| ADC Resolution | 12 bits |
| DAC Resolution | 10 bits |
| Operating Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| パッケージ | 32-VQFN, 5 mm x 5 mm |
| 実装タイプ | Surface mount |
| Product Family | SAM D20E |
| Core | Arm Cortex-M0+ |
| Data Word Width | 32 bits |
| Program Memory Type | Flash |
| ピン数 | 32 pins |
ATSAMD20E17A-MU 32-vqfn, 5 mm x 5 mm ピン配置ガイド
ATSAMD20E17A-MU (32-vqfn, 5 mm x 5 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATSAMD20E17A-MU.
詳細は データシート をご参照ください。
主な用途
ATSAMD20E17A-MU の用途: 6 件s: Smart Home Sensor Nodes, Utility Metering, Industrial Control Modules, Consumer Appliance Control, Compact Data Acquisition, Connected Embedded Control.
Smart Home Sensor Nodes
The ATSAMD20E17A-MU fits compact smart-home sensor nodes that combine local measurement, configuration storage, and low-power control. Its 48 MHz Arm Cortex-M0+ core provides sufficient processing speed for event-driven sensor handling, while the 128 KB flash stores application firmware and 16 KB of SRAM holds protocol state and measurement buffers. The 32-VQFN package also supports dense PCB construction. For battery-powered designs, the relevant trade-off is that processing, radio activity, and analog-converter use determine the overall current budget, so firmware sleep behavior and peripheral settings should be evaluated alongside the controller's processing capability.
おすすめ
Utility Metering
The ATSAMD20E17A-MU is suitable for metering modules that acquire sensor information and maintain calibration or communication data locally. Its documented 12-bit ADC supports analog measurement, and its 48 MHz processor core can service time-sensitive sampling, filtering, and protocol tasks. The 128 KB flash provides storage for firmware, while the 16 KB SRAM can hold rolling samples and communication buffers. In this application, the controller should be clocked within its specified operating options of 1.8 V, 2.5 V, or 3.3 V, and the analog input network should be designed to limit source impedance and switching noise.
おすすめ
Industrial Control Modules
The ATSAMD20E17A-MU can serve as the central controller in a compact industrial control module requiring deterministic embedded processing and mixed-signal capability. The 48 MHz Cortex-M0+ core handles control logic, the 12-bit ADC acquires process variables, and the 10-bit DAC can generate an analog control signal where required. Its 128 KB flash accommodates application code and configuration, while the 16 KB SRAM supports state machines and communication buffers. Industrial equipment should also account for environmental limits, isolation, surge protection, and grounding requirements beyond the MCU's basic electrical specifications.
おすすめ
Consumer Appliance Control
The ATSAMD20E17A-MU is appropriate for consumer appliances that need local logic, analog sensing, and compact packaging without a high-cost application processor. A 48 MHz Cortex-M0+ core can implement user-interface logic, motor or valve sequencing, and safety monitoring, while the 12-bit ADC supports sensor inputs. The 128 KB flash supports firmware updates and operating profiles, and the 16 KB SRAM can hold state during active control. Its 32-VQFN package minimizes board area, but exposed-pad layout and heat spreading require careful implementation to avoid assembly or thermal problems.
おすすめ
Compact Data Acquisition
The ATSAMD20E17A-MU works well in a compact data-acquisition front end where an analog signal must be digitized, conditioned in firmware, and retained or transmitted. Its 12-bit ADC supports sensor measurement, the 48 MHz core can perform digital filtering, and the 16 KB SRAM provides working memory for rolling acquisition buffers. The 128 KB flash holds the acquisition application and configuration data. Designers should account for analog conditioning, reference-voltage stability, input bandwidth, and ground-plane separation; the controller's ADC characteristics alone do not determine the accuracy of the complete measurement chain.
おすすめ
Connected Embedded Control
The ATSAMD20E17A-MU can serve as the embedded-control element in a connected device when a separate communications device handles radio traffic. The microcontroller can supervise sensors, execute local control rules, and maintain protocol or user-interface state across its 128 KB flash and 16 KB SRAM. Its 48 MHz processing rate supports responsive event-driven software, and the 32-VQFN footprint leaves board space for the communications subsystem. The partition between MCU and radio should be defined early because buffer ownership, interrupt priorities, firmware update procedures, and low-power wake-up behavior can materially affect the final system architecture.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATSAMD20E17A-MU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATSAMD20E18A-MU | ATSAMD21E18A-MFT | ATSAMD21E17A-MU | ATSAM3N1AA-MU | ATSAM3S1BA-MUR |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 32-VQFN (5x5 mm) | 32-VQFN (5x5 mm) | 32-VQFN (5x5 mm) | 32-VQFN (5x5 mm) | 32-VQFN (5x5 mm) | 32-VQFN (5x5 mm) |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ family | Arm Cortex-M0+ family | Arm Cortex-M0+ family | Arm Cortex-M0+ family | Arm Cortex-M0+ family |
| Maximum Clock Frequency | 48 MHz | 48 MHz class | 48 MHz class | 48 MHz class | 48 MHz class | 48 MHz class |
| Product Family | SAM D20E | SAM D20E | SAM D21E | SAM D21E | SAM3 | SAM3 |
主な差別化要因
- Lower flash requirement with a direct SAM D20-family candidate (vs ATSAMD20E18A-MU)
- Lower SRAM requirement for constrained control designs (vs ATSAMD21E18A-MFT)
- Tighter memory alignment with an exact-family migration candidate (vs ATSAMD21E17A-MU)
設計ノート
Use the manufacturer package drawing and land pattern for the 32-VQFN footprint, including the exposed thermal pad. Verify pad dimensions, solder-mask opening, paste stencil, and side termination tolerances against the current package documentation. Keep the exposed pad's via pattern short and symmetric, and provide adequate ground-plane area beneath the device so heat can spread into the board rather than concentrating at one point.
Route analog inputs away from switching nodes, clock signals, and fast edge-current paths. Place the associated input filtering and reference components close to the MCU pins, while keeping the analog ground and digital return paths under control. For mixed-signal boards, follow the manufacturer's grounding and decoupling recommendations and measure converter behavior on the assembled prototype because the 12-bit ADC rating alone does not define total measurement accuracy.
Place decoupling capacitors at the supply pins with very short, low-inductance connections, and follow the manufacturer guidance for capacitor type, voltage rating, and effective capacitance. The device supports 1.8 V, 2.5 V, and 3.3 V operation, but the selected supply must remain inside the complete electrical limits for the active frequency and temperature. Validate startup, brownout behavior, and regulator stability in hardware rather than assuming nominal voltage is sufficient.
Do not treat same-package alternatives as unconditional drop-in replacements. ATSAMD20E18A-MU, ATSAMD21E18A-MFT, ATSAMD21E17A-MU, ATSAM3N1AA-MU, and ATSAM3S1BA-MUR require pin-by-pin review of the exposed pad, power pins, analog channels, communication interfaces, interrupt mapping, and startup behavior. Also check whether firmware generated for one family relies on peripheral addresses or register definitions that differ in the replacement family.
コンプライアンス情報
The manufacturer and comparison records do not state the requested compliance details. AEC-Q100 is not applicable because ATSAMD20E17A-MU is an industrial and commercial microcontroller rather than an automotive-qualified device.