Microchip Technology

ATSAMD20E17A-MU - 48MHz Cortex-M0+ 128KB Flash MCU | Microchip

MPN: ATSAMD20E17A-MU ✓ Aktif
1.8 V, 2.5 V, or 3.3 V Vdss 32-VQFN, 5 mm x 5 mm Package 48 MHz Speed 128 KB Memory
MOQ: 1 |

ATSAMD20E17A-MU Genel Bakış

The Microchip Technology ATSAMD20E17A-MU is a 32-bit ARM Cortex-M0+ flash microcontroller with a 48 MHz maximum clock, 128 KB of programmable flash, and 16 KB of SRAM, packaged in a 32-VQFN surface-mount package measuring 5 mm by 5 mm. The device belongs to the SAM D20 family and combines a compact general-purpose microcontroller architecture with low-power operation for embedded control, metering, home automation, consumer equipment, and industrial applications.

An MCU is an integrated circuit containing a processor core, program memory, data memory, peripherals, and communication interfaces on one semiconductor device. The ATSAMD20E17A-MU follows the hierarchy of MCU, embedded microcontroller, 32-bit microcontroller, ARM Cortex-M0+ microcontroller, and low-power flash MCU. Its Cortex-M0+ architecture supports efficient event-driven control while the integrated flash allows firmware and configuration data to be stored directly on the chip.

Three principal characteristics define the device: a 48 MHz operating-clock maximum, 128 KB of flash memory, and 16 KB of SRAM. The 128 KB flash capacity provides room for application firmware, while the 16 KB SRAM supports working variables, protocol buffers, and real-time control state. Operation at 1.8 V, 2.5 V, or 3.3 V makes the part suitable for low-voltage embedded systems whose rails remain within these stated operating conditions. The 32-VQFN package also supports compact, high-density PCB layouts.

The ATSAMD20E17A-MU integrates a 12-bit ADC and a 10-bit DAC, as identified in the manufacturer product documentation. These mixed-signal resources allow a single microcontroller to acquire analog sensor data and generate an analog output without requiring separate converters. The SAM D20 device family is designed around an Arm Cortex-M0+ core and embedded peripherals intended for connected control, sensing, and metering systems. Exact peripheral counts, timer configurations, and converter performance characteristics should be confirmed in the manufacturer datasheet before final schematic or firmware allocation.

Typical applications include smart-home sensor nodes, utility and resource meters, industrial control modules, consumer appliances, and compact embedded data-acquisition equipment. In a metering design, the ADC can sample a sensor signal while SRAM holds calibration data and protocol state. In home automation, the flash can hold application firmware and configuration parameters. A switching supply can power the device from a 1.8 V, 2.5 V, or 3.3 V rail while the Cortex-M0+ processor handles low-duty-cycle processing.

PCB implementation requires careful treatment of the exposed pad and its thermal connection. Place input and output decoupling capacitors close to the appropriate supply pins, route sensitive analog inputs away from fast-switching nodes, and connect the exposed pad to a properly sized ground plane using the manufacturer land-pattern and thermal-layout guidance. Confirm exposed-pad soldering, mask, and paste requirements before releasing the PCB artwork.

This page organizes the core ATSAMD20E17A-MU specifications, verified source links, same-package replacement candidates, application guidance, and design considerations into an engineering-focused reference. Use the manufacturer datasheet for the authoritative pin-description table, electrical limits, programming information, and package drawings.

Drop-in alternatifler için ATSAMD20E17A-MU — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller ATSAMD20E17A-MU (aynı form faktörü ve ayağa oturma) — farklı olan SRAM, Package, Series, DAC, Flash Memory.

Microchip Technology
SRAM: 8 KB (8K x 8)
Series: SAM3N
İle Karşılaştır ATSAMD20E17A-MU →
Microchip Technology
Package: 64-VFQFN (9x9 mm) Exposed Pad
Series: SAM3S
DAC: 2 x 12-bit
İle Karşılaştır ATSAMD20E17A-MU →
Microchip Technology
SRAM: 2 KB
Series: SAM D20
DAC: 10-bit, 350 ksps
İle Karşılaştır ATSAMD20E17A-MU →
Microchip Technology
SRAM: 32 KB (32K x 8)
Package: 32-VQFN (5x5 mm) with Exposed Pad
İle Karşılaştır ATSAMD20E17A-MU →
Microchip Technology
Package: 32-VQFN (5x5) with exposed pad
Series: SAM D21E (Functional Safety)
DAC: 10-bit, 1 channel
İle Karşılaştır ATSAMD20E17A-MU →

ATSAMD20E18A-MU

✅ Yerleştirme
Microchip Technology
📦 32-VQFN (5x5 mm)
ARM Cortex-M0+ · ARM 32-bit · Thumb/Thumb-2 · 48 MHz · 256 KB (256K x 8) · 32 KB (32K x 8) · 1.62 V to 3.63 V · -40 C to +85 C

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

ATSAMD21E18A-MFT

✅ Yerleştirme
📦 32-VQFN (5x5 mm)
Same 32-pin QFN footprint and 48 MHz class; comparison data identifies 256 KB flash versus 128 KB for the target, a 100% increase

📋 Katalogda Olmayan Referans Alternatifi

ATSAMD21E17A-MU

✅ Yerleştirme
Microchip Technology
📦 32-VQFN (5x5 mm)
ARM Cortex-M0+ (32-bit) · SAM D21E (Functional Safety) · 48 MHz · 2.46 · 128 KB (128K x 8) · 16 KB · 4 KB · 1.62 V to 3.63 V

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

ATSAM3N1AA-MU

✅ Yerleştirme
Microchip Technology
📦 32-VQFN (5x5 mm)
ARM Cortex-M3 (revision 2.0) · 32-bit · 48 MHz · 64 KB (64K x 8) · 8 KB (8K x 8) · 1.62 V to 3.6 V · 47 · Thumb-2

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

ATSAM3S1BA-MUR

✅ Yerleştirme
Microchip Technology
📦 32-VQFN (5x5 mm)
ARM Cortex-M3 · 32-bit single-core · 64 MHz · 64 KB (64K x 8) · 16 KB · 1.62 V to 3.6 V · 1.8 V / 3.3 V · -40C to +85C

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

ATSAMD20E17A-MU Maksimum Değerlendirmeler & Elektriksel Özellikler

Architecture 32-bit ARM Cortex-M0+
Azami Saat Hızı 48 MHz
Flash Memory 128 KB
Flash Organization 128K x 8 bits
SRAM 16 KB
ADC Resolution 12 bits
DAC Resolution 10 bits
Operating Voltage Options 1.8 V, 2.5 V, or 3.3 V
Paket 32-VQFN, 5 mm x 5 mm
Montaj Türü Surface mount
Product Family SAM D20E
Core Arm Cortex-M0+
Data Word Width 32 bits
Program Memory Type Flash
Pin Sayısı 32 pins

ATSAMD20E17A-MU 32-vqfn, 5 mm x 5 mm Pin Yapısı Kılavuzu

ATSAMD20E17A-MU (32-vqfn, 5 mm x 5 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

32-vqfn, 5 mm x 5 mm paket pin çizelgesi için ATSAMD20E17A-MU

Ayrıntılı pin çıkış verisi mevcut değil: ATSAMD20E17A-MU.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

ATSAMD20E17A-MU için uygundur 6 uygulamas: Smart Home Sensor Nodes, Utility Metering, Industrial Control Modules, Consumer Appliance Control, Compact Data Acquisition, Connected Embedded Control.

🧩

Smart Home Sensor Nodes

The ATSAMD20E17A-MU fits compact smart-home sensor nodes that combine local measurement, configuration storage, and low-power control. Its 48 MHz Arm Cortex-M0+ core provides sufficient processing speed for event-driven sensor handling, while the 128 KB flash stores application firmware and 16 KB of SRAM holds protocol state and measurement buffers. The 32-VQFN package also supports dense PCB construction. For battery-powered designs, the relevant trade-off is that processing, radio activity, and analog-converter use determine the overall current budget, so firmware sleep behavior and peripheral settings should be evaluated alongside the controller's processing capability.

🔧

Utility Metering

The ATSAMD20E17A-MU is suitable for metering modules that acquire sensor information and maintain calibration or communication data locally. Its documented 12-bit ADC supports analog measurement, and its 48 MHz processor core can service time-sensitive sampling, filtering, and protocol tasks. The 128 KB flash provides storage for firmware, while the 16 KB SRAM can hold rolling samples and communication buffers. In this application, the controller should be clocked within its specified operating options of 1.8 V, 2.5 V, or 3.3 V, and the analog input network should be designed to limit source impedance and switching noise.

🏭

Industrial Control Modules

The ATSAMD20E17A-MU can serve as the central controller in a compact industrial control module requiring deterministic embedded processing and mixed-signal capability. The 48 MHz Cortex-M0+ core handles control logic, the 12-bit ADC acquires process variables, and the 10-bit DAC can generate an analog control signal where required. Its 128 KB flash accommodates application code and configuration, while the 16 KB SRAM supports state machines and communication buffers. Industrial equipment should also account for environmental limits, isolation, surge protection, and grounding requirements beyond the MCU's basic electrical specifications.

🔧

Consumer Appliance Control

The ATSAMD20E17A-MU is appropriate for consumer appliances that need local logic, analog sensing, and compact packaging without a high-cost application processor. A 48 MHz Cortex-M0+ core can implement user-interface logic, motor or valve sequencing, and safety monitoring, while the 12-bit ADC supports sensor inputs. The 128 KB flash supports firmware updates and operating profiles, and the 16 KB SRAM can hold state during active control. Its 32-VQFN package minimizes board area, but exposed-pad layout and heat spreading require careful implementation to avoid assembly or thermal problems.

📊

Compact Data Acquisition

The ATSAMD20E17A-MU works well in a compact data-acquisition front end where an analog signal must be digitized, conditioned in firmware, and retained or transmitted. Its 12-bit ADC supports sensor measurement, the 48 MHz core can perform digital filtering, and the 16 KB SRAM provides working memory for rolling acquisition buffers. The 128 KB flash holds the acquisition application and configuration data. Designers should account for analog conditioning, reference-voltage stability, input bandwidth, and ground-plane separation; the controller's ADC characteristics alone do not determine the accuracy of the complete measurement chain.

🌐

Connected Embedded Control

The ATSAMD20E17A-MU can serve as the embedded-control element in a connected device when a separate communications device handles radio traffic. The microcontroller can supervise sensors, execute local control rules, and maintain protocol or user-interface state across its 128 KB flash and 16 KB SRAM. Its 48 MHz processing rate supports responsive event-driven software, and the 32-VQFN footprint leaves board space for the communications subsystem. The partition between MCU and radio should be defined early because buffer ownership, interrupt priorities, firmware update procedures, and low-power wake-up behavior can materially affect the final system architecture.

What is the ATSAMD20E17A-MU?
The ATSAMD20E17A-MU is a 32-bit low-power flash microcontroller from Microchip Technology, built around an Arm Cortex-M0+ processor operating up to 48 MHz. It provides 128 KB of flash, 16 KB of SRAM, a 12-bit ADC, and a 10-bit DAC in a 32-VQFN package. According to the Microchip manufacturer product page, the SAM D20E family targets home automation, consumer, metering, and industrial applications.
What are the key specifications of ATSAMD20E17A-MU that engineers should know?
The ATSAMD20E17A-MU combines a 48 MHz Arm Cortex-M0+ core with 128 KB of flash and 16 KB of SRAM in a 5 mm by 5 mm 32-VQFN package. Its documented operating-voltage options are 1.8 V, 2.5 V, and 3.3 V, and the family includes a 12-bit ADC plus a 10-bit DAC. The Microchip manufacturer product page identifies these resources for low-power home-automation, consumer, metering, and industrial designs.
Where can I download the ATSAMD20E17A-MU datasheet PDF?
The official ATSAMD20E17A-MU datasheet is available through the Microchip ATSAMD20E17 product page at https://www.microchip.com/en-us/product/ATsamd20e17. Select the documentation section for the device data sheet and related supporting documents. The linked product family documentation is the authoritative source for pin descriptions, electrical characteristics, package dimensions, and programming information for ATSAMD20E17A-MU.
Where can I find the ATSAMD20E17A-MU pinout?
The ATSAMD20E17A-MU pinout is documented in the pin-description table and package drawing in the Microchip manufacturer datasheet. The device uses a 32-VQFN package with an exposed pad, so the footprint includes 32 perimeter pins plus the thermal-pad connection. Use the manufacturer pin table when assigning PCB tracks because programming and peripheral functions depend on the selected package and device variant.
How much flash memory and SRAM does ATSAMD20E17A-MU have?
The ATSAMD20E17A-MU contains 128 KB of flash memory organized as 128K by 8 bits and 16 KB of SRAM. The Microchip manufacturer product page confirms both memory capacities. This combination is useful for firmware-intensive embedded control tasks that also need working RAM for protocol handling, acquisition buffers, and real-time state without external memory.
What voltage does the ATSAMD20E17A-MU operate at?
The ATSAMD20E17A-MU supports operating-voltage options of 1.8 V, 2.5 V, and 3.3 V. The operating range is identified in the manufacturer comparison and product documentation for the device. Confirm the detailed electrical limits, regulator configurations, and power-consumption curves in the ATSAMD20E17 datasheet for the exact voltage and peripheral configuration used in the design.
Is the ATSAMD20E17A-MU suitable for home automation and metering applications?
Yes, the ATSAMD20E17A-MU is specifically positioned for home automation, consumer, metering, and industrial applications. Its 48 MHz Cortex-M0+ core supports responsive embedded control, while 128 KB of flash accommodates firmware and configuration data. The 12-bit ADC supports sensor acquisition and the 10-bit DAC can provide an analog output where the selected application requires it.
ATSAMD20E17A-MU vs ATSAMD20E18A-MU: which is better for a new design?
The ATSAMD20E17A-MU and ATSAMD20E18A-MU are both Microchip SAM D20-family devices identified by the cross-reference results, and both are represented by 32-pin QFN configurations. The target ATSAMD20E17A-MU is specified at 48 MHz with 128 KB flash and 16 KB SRAM. The ATSAMD20E18A-MU memory details should be confirmed in the manufacturer documentation before choosing it where firmware capacity or SRAM is the deciding factor.
When should I choose ATSAMD20E17A-MU over ATSAMD20E18A-MU?
Choose ATSAMD20E17A-MU when its documented 48 MHz operating speed, 128 KB flash, and 16 KB SRAM satisfy the firmware and real-time processing requirements and its 32-VQFN footprint matches the PCB. Consider ATSAMD20E18A-MU when a larger memory configuration is specifically needed and its manufacturer data sheet confirms compatible electrical, pin, and peripheral requirements. Do not rely on package similarity alone for a drop-in decision.
What can replace ATSAMD20E17A-MU on the same PCB footprint?
ATSAMD20E18A-MU is the closest same-brand candidate identified by the component cross-reference results because it belongs to the SAM D20 family and is offered in a 32-pin QFN configuration. Before treating it as a drop-in replacement, confirm the complete pin table, exposed-pad connection, operating-voltage limits, peripheral assignments, startup behavior, and firmware requirements against the ATSAMD20E17A-MU manufacturer datasheet.
Is there a confirmed cross-brand drop-in replacement for ATSAMD20E17A-MU?
No cross-brand drop-in replacement can be confirmed from the available cross-reference results. The listed comparison candidates are Microchip devices, while the search results do not establish that another manufacturer's MCU has identical pin assignments, exposed-pad requirements, interrupt mapping, and peripheral behavior. Treat functional comparability as insufficient; request the manufacturer pin and electrical documentation before approving a cross-brand substitution.
Can ATSAMD20E18A-MU replace ATSAMD20E17A-MU?
ATSAMD20E18A-MU is a credible same-brand migration candidate because the cross-reference data identifies it as an ATSAMD20E17A-MU comparison and the ATSAMD20E18A-MU is listed in a 32-pin QFN package. A direct replacement still requires verification of every exposed-pad and peripheral connection. Check memory requirements, voltage limits, ADC and DAC characteristics, startup timing, and firmware dependencies in both manufacturer data sheets.
Where can I buy ATSAMD20E17A-MU online?
Use the Request a Quote form on this page to request ATSAMD20E17A-MU availability, current commercial terms, and lead time. The quote workflow is the appropriate route for confirming exact suffix compatibility and production quantities. Microchip's ATSAMD20E17 family page and the linked component listings can also be used to cross-check the exact MPN, 32-VQFN package, 128 KB flash, and 16 KB SRAM configuration.
What is the price of ATSAMD20E17A-MU?
The current ATSAMD20E17A-MU price is shown through the Request a Quote form on this page. Submit the required quantity, target date, and packaging preference to obtain a commercial response. For engineering review, confirm that the quoted item is ATSAMD20E17A-MU with the 32-VQFN package rather than a related SAM D20-family ordering code.
What is the lead time and stock status for ATSAMD20E17A-MU?
The ATSAMD20E17A-MU lead time and current stock status should be confirmed through the Request a Quote form on this page. Include your required order quantity, date code preference, and shipment destination so the response reflects the appropriate manufacturing schedule. The Microchip product page and ATSAMD20E17A-MU component records identify the exact device, but live availability can change with production and demand.

Mühendislik referans verileri: ATSAMD20E17A-MU — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose ATSAMD20E17A-MU when a design needs a 48 MHz Arm Cortex-M0+ controller, 128 KB of flash, 16 KB of SRAM, and a compact 32-VQFN footprint. ATSAMD20E18A-MU is the closest same-family alternative to evaluate when more memory or related peripheral configuration is useful. ATSAMD21E18A-MFT may suit designs that can use its documented 256 KB flash, while ATSAMD21E17A-MU is appropriate when the SAM D21 family is preferred. ATSAM3N1AA-MU and ATSAM3S1BA-MUR are more disruptive migrations because register definitions and peripheral behavior differ. For every candidate, confirm the complete 32-VQFN pinout, exposed-pad connection, operating-voltage limits, ADC and DAC characteristics, package tolerances, and firmware dependencies. This page identifies package-compatible engineering candidates, but final substitution approval should follow a manufacturer data-sheet review and hardware validation.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün ATSAMD20E18A-MU ATSAMD21E18A-MFT ATSAMD21E17A-MU ATSAM3N1AA-MU ATSAM3S1BA-MUR
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 32-VQFN (5x5 mm) 32-VQFN (5x5 mm) 32-VQFN (5x5 mm) 32-VQFN (5x5 mm) 32-VQFN (5x5 mm) 32-VQFN (5x5 mm)
Processor Core Arm Cortex-M0+ Arm Cortex-M0+ family Arm Cortex-M0+ family Arm Cortex-M0+ family Arm Cortex-M0+ family Arm Cortex-M0+ family
Maximum Clock Frequency 48 MHz 48 MHz class 48 MHz class 48 MHz class 48 MHz class 48 MHz class
Product Family SAM D20E SAM D20E SAM D21E SAM D21E SAM3 SAM3

Ana Farklılayıcılar

  • Lower flash requirement with a direct SAM D20-family candidate (karşılaştırma:ATSAMD20E18A-MU)
  • Lower SRAM requirement for constrained control designs (karşılaştırma:ATSAMD21E18A-MFT)
  • Tighter memory alignment with an exact-family migration candidate (karşılaştırma:ATSAMD21E17A-MU)

Tasarım Notları

Use the manufacturer package drawing and land pattern for the 32-VQFN footprint, including the exposed thermal pad. Verify pad dimensions, solder-mask opening, paste stencil, and side termination tolerances against the current package documentation. Keep the exposed pad's via pattern short and symmetric, and provide adequate ground-plane area beneath the device so heat can spread into the board rather than concentrating at one point.

Route analog inputs away from switching nodes, clock signals, and fast edge-current paths. Place the associated input filtering and reference components close to the MCU pins, while keeping the analog ground and digital return paths under control. For mixed-signal boards, follow the manufacturer's grounding and decoupling recommendations and measure converter behavior on the assembled prototype because the 12-bit ADC rating alone does not define total measurement accuracy.

Place decoupling capacitors at the supply pins with very short, low-inductance connections, and follow the manufacturer guidance for capacitor type, voltage rating, and effective capacitance. The device supports 1.8 V, 2.5 V, and 3.3 V operation, but the selected supply must remain inside the complete electrical limits for the active frequency and temperature. Validate startup, brownout behavior, and regulator stability in hardware rather than assuming nominal voltage is sufficient.

Do not treat same-package alternatives as unconditional drop-in replacements. ATSAMD20E18A-MU, ATSAMD21E18A-MFT, ATSAMD21E17A-MU, ATSAM3N1AA-MU, and ATSAM3S1BA-MUR require pin-by-pin review of the exposed pad, power pins, analog channels, communication interfaces, interrupt mapping, and startup behavior. Also check whether firmware generated for one family relies on peripheral addresses or register definitions that differ in the replacement family.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The manufacturer and comparison records do not state the requested compliance details. AEC-Q100 is not applicable because ATSAMD20E17A-MU is an industrial and commercial microcontroller rather than an automotive-qualified device.

Veri doğrulanma tarihi: 2026-11-15 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

ATSAMD20E17A-MU datasheet ATSAMD20E17A-MU pinout ATSAMD20E17A-MU datasheet pdf ATSAMD20E17A-MU specifications ATSAMD20E17A-MU equivalent ATSAMD20E17A-MU replacement ATSAMD20E17A-MU cross reference ATSAMD20E17A-MU vs ATSAMD20E18A-MU ATSAMD20E17A-MU footprint ATSAMD20E17A-MU price ATSAMD20E17A-MU stock Microchip ATSAMD20E17A-MU ATSAMD20E17A-MU 32 VQFN ATSAMD20E17A-MU application circuit

İlgili Bileşenler ve Terimler

Microchip Technology ATSAMD20E17A-MU ATSAMD20E17 ATSAMD20E18A-MU ATSAMD21E18A-MFT ATSAMD21E17A-MU ATSAM3N1AA-MU ATSAM3S1BA-MUR Arm Cortex-M0+ microcontroller MCU embedded microcontroller 32-bit microcontroller flash memory SRAM 12-bit ADC 10-bit DAC 32-VQFN QFN family surface mount SMD home automation industrial control metering embedded control
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle