ATTINY1634-MU - 12MHz 16KB AVR MCU | Microchip Technology
部品番号: ATTINY1634-MU ✓ 生産中ATTINY1634-MU 概要
A tinyAVR microcontroller is a compact 8-bit MCU built around the AVR enhanced RISC architecture. Within the semiconductor hierarchy, an MCU combines a processor core, memory, analog conversion, timers, and serial interfaces on one die. The ATtiny1634 family combines that integration with low-power operation and in-system programmability, making it suitable for compact embedded controllers that need more than basic digital I/O without the size of a larger microcontroller.
The principal features of the ATTINY1634-MU include 16 KB of Flash, 1 KB of SRAM, 18 I/O pins, and operation up to 12 MHz. Its 12-channel ADC supports analog measurements from sensors and resistive dividers, while the four PWM channels can drive LED dimming, motor control, or signal generation. SPI, I2C, and USART interfaces provide paths to external sensors, display controllers, memory, and host systems without consuming separate serial peripherals.
The AVR architecture executes instructions in a single clock cycle, providing responsive control for event-driven firmware. Brown-out detection and a watchdog timer support reliable operation by detecting abnormal supply conditions and recovering from stalled firmware. The exposed pad under the 20-pin QFN package provides a thermal path into the PCB, making copper-pad layout important when the MCU operates continuously near its upper clock limit.
Typical applications include industrial sensor nodes, compact motor controllers, LED lighting modules, battery-powered monitoring equipment, instrumentation front ends, and small serial-interface products. The ATTINY1634-MU is particularly useful when a board needs flexible digital control alongside analog sensing, while the 16 KB Flash capacity allows more complex state machines and protocol handling than the smallest members of the tinyAVR family.
PCB implementation should preserve short return paths from the exposed pad to a solid ground plane and place decoupling capacitors close to the supply pins. Designers should also budget regulator headroom for the selected 2.5 V, 3.3 V, or 5 V rail, verify operating limits against the selected clock configuration, and reserve programming access for ISP programming and debugging.
This product record combines the manufacturer specifications, package details, interface capabilities, and drop-in alternatives with practical guidance for decoupling, thermal design, firmware constraints, and interface integration. It is intended to help engineers evaluate the ATTINY1634-MU against same-family alternatives before committing a compact embedded design to a 20-pin QFN footprint.
ドロップイン代替品: ATTINY1634-MU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
ATTINY1634-MUR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATTINY1634-MNR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATTINY1634-MU 最大定格&電気的特性
| Architecture | 8-bit AVR enhanced RISC |
| 最大クロック周波数 | 12 MHz |
| Flash Memory | 16 KB |
| Flash Organization | 16K x 8 bytes |
| SRAM | 1 KB |
| データバス幅 | 8 bits |
| General-Purpose I/O Pins | 18 pins |
| ADC Channels | 12 channels |
| PWM Channels | 4 channels |
| Timers/Counters | 2 |
| Serial Interfaces | I2C, SPI, UART/USART |
| 動作電源電圧 | 2.5 V to 5 V |
| パッケージ | 20-pin QFN with exposed pad, 4 mm x 4 mm |
| 実装タイプ | Surface mount |
| Shipping Format | Tray |
| Brown-Out Detection | Yes |
| Watchdog Timer | Yes |
| Programming Interface | In-system programming and debug |
ATTINY1634-MU 20-pin qfn with exposed pad, 4 mm x 4 mm ピン配置ガイド
ATTINY1634-MU (20-pin qfn with exposed pad, 4 mm x 4 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATTINY1634-MU.
詳細は データシート をご参照ください。
主な用途
ATTINY1634-MU の用途: 6 件s: Industrial Sensor Node, LED Lighting Controller, Compact Motor Controller, Battery-Powered Monitor, Instrumentation Front End, Serial Interface Controller.
Industrial Sensor Node
The ATTINY1634-MU fits compact industrial sensor nodes because its 12-channel ADC can acquire several analog inputs while 18 I/O pins handle digital sensors, alarms, and communication lines. The 8-bit AVR core operates up to 12 MHz, providing responsive handling of local filtering and control logic, while 16 KB of Flash accommodates application firmware and 1 KB of SRAM supports working state. SPI, I2C, and USART allow the node to connect to local sensing, storage, or supervisory electronics. In an industrial design, isolate sensitive analog routing from switching circuitry, use a regulated low-noise supply, and validate the node against the manufacturer electrical limits for the selected voltage and temperature conditions.
おすすめ
LED Lighting Controller
The ATTINY1634-MU is well suited to LED lighting control because four PWM channels can drive multiple dimming or color-mixing channels without separate timer peripherals. Its 18 I/O pins can support pushbuttons, occupancy inputs, status indicators, and fault signals, while the 12-channel ADC can monitor current or temperature conditions when suitable sensing circuitry is added. The 16 KB Flash capacity is useful for storing lighting scenes, fade tables, and communication handlers. A practical implementation should use transistor driver stages for LED current, keep high-current switching paths away from analog inputs, and derive timer parameters from the selected clock configuration rather than assuming a fixed frequency.
おすすめ
Compact Motor Controller
The ATTINY1634-MU can serve as the control processor in a compact brushed-motor or low-power actuator controller. Its four PWM channels support speed, position, or step-rate commands, while the ADC can sample potentiometers, hall sensors, or current-sense signals. Eighteen I/O pins provide room for direction controls, limit switches, and communications, and the 12 MHz AVR core provides sufficient control throughput for many embedded motor algorithms. The MCU should not drive the motor directly; use appropriately rated transistors, flyback protection, and current limiting. Firmware should also incorporate stall or timeout behavior so a mechanical fault does not leave the PWM outputs active indefinitely.
おすすめ
Battery-Powered Monitor
The ATTINY1634-MU fits battery-powered monitoring products where a compact controller must combine sensing, local logic, and serial reporting. Its 12-channel ADC supports battery-voltage and environmental measurements, while I2C and SPI provide connections to low-power sensors or memory. The 8-bit architecture and 1 KB SRAM allow event filtering and threshold logic without requiring a large embedded system, and the 16 KB Flash provides space for calibration data and communication routines. To maximize operating life, use the family’s low-power operating modes, disable unused peripherals, and choose external sensors and pull networks that do not dominate the standby current of the complete board.
おすすめ
Instrumentation Front End
The ATTINY1634-MU can act as the control and conditioning element in a compact instrumentation front end. Its 12-channel ADC supports several sensor inputs, its 18 I/O pins can operate switches, indicators, and front-panel controls, and its UART/USART capability allows a host computer to configure the instrument or retrieve measurements. The 16 KB Flash and 1 KB SRAM are suitable for calibration tables, filtering state, and a user interface state machine. Analog accuracy depends on the complete signal chain, so use a stable reference, controlled source impedance, appropriate filtering, and careful grounding. Firmware should also report out-of-range conditions instead of saturating readings without warning.
おすすめ
Serial Interface Controller
The ATTINY1634-MU is effective as a dedicated serial-interface controller because it combines I2C, SPI, UART/USART, 18 I/O pins, and a 12 MHz AVR core in a 20-pin QFN package. It can act as a protocol bridge, configuration interface, or peripheral controller while managing local digital inputs and outputs. Sixteen kilobytes of Flash is adequate for framing logic and several protocol handlers, and the integrated watchdog can help recover from communication stalls or firmware faults. For robust board integration, define buffer direction and speed limits, include pull-up or termination components required by the selected bus, and use the manufacturer programming guidance to preserve access to ISP and debugging functions.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATTINY1634-MU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATTINY1634-MUR | ATTINY1634-MNR |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin QFN with exposed pad, 4 mm x 4 mm | 20-pin QFN with exposed pad, 4 mm x 4 mm | 20-pin QFN with exposed pad, 4 mm x 4 mm |
| Architecture | 8-bit AVR enhanced RISC | 8-bit AVR enhanced RISC | 8-bit AVR enhanced RISC |
| Maximum Clock Frequency | 12 MHz | 12 MHz | 12 MHz |
| Flash Memory | 16 KB | 16 KB | 16 KB |
| Orderable Format | ATTINY1634-MU tray format | ATTINY1634-MUR reel format | ATTINY1634-MNR ordering format |
主な差別化要因
- Combines analog conversion and three serial interfaces in a compact controller (vs ATTINY1634-MUR)
- Matches the 12 MHz and 16 KB Flash core configuration of the documented ordering alternatives (vs ATTINY1634-MNR)
- Provides substantial memory and I/O for a compact embedded design (vs ATTINY1634-MUR)
設計ノート
Treat the QFN exposed pad as both an electrical and thermal feature. Connect it to the same ground net specified by the manufacturer, place a thermal-via array inside the land pattern, and maintain uninterrupted ground-plane area beneath the device. Place input and output decoupling capacitors close to their corresponding supply pins, with the smallest capacitor closest to the pin, to limit supply transients as the AVR core and peripherals switch.
Select the regulator for the complete 2.5 V, 3.3 V, or 5 V operating condition rather than its nominal value alone. Account for startup current, peripheral load, clock configuration, temperature, and regulator tolerance. If the clock changes between low-frequency sleep operation and the 12 MHz maximum, verify that the supply remains within the manufacturer operating range during the transition and that brown-out settings do not interrupt valid operation.
Do not infer that every ATTINY1634 ordering suffix has identical qualification, temperature, marking, or packing terms. The target ATTINY1634-MU is associated with a 20-pin QFN tray configuration, while ATTINY1634-MUR is associated with reel shipment and ATTINY1634-MNR uses another ordering suffix. Confirm the complete manufacturer ordering information, exposed-pad layout, and firmware support before approving any substitution.
Route analog inputs away from PWM outputs, clock edges, and high-current switching paths. Use short traces, a continuous ground reference, and filtering matched to the sensor bandwidth. I2C, SPI, and USART lines should follow their respective topology, including the required pull-ups, termination, and signal-level constraints. Preserve the ISP and debug connections in the layout so programming remains possible after final assembly.
Use the watchdog timer as a recovery mechanism rather than as a substitute for deterministic firmware design. Production firmware should reset shared outputs, reload timer and counter registers, and return peripherals to safe states during initialization. In battery-powered products, disable unused timers, ADC channels, and serial interfaces before entering long sleep intervals so that quiescent current remains controlled by the complete application design.
コンプライアンス情報
Compliance status was not stated in the manufacturer or catalog material used for this record. The exposed-pad QFN package and operating voltage range are confirmed, but environmental qualification and material-compliance claims require confirmation from Microchip Technology for the exact ordering code.