Microchip Technology

ATTINY1634-MU - 12MHz 16KB AVR MCU | Microchip Technology

MPN: ATTINY1634-MU ✓ Active
2.5 V to 5 V Vdss 20-pin QFN with exposed pad, 4 mm x 4 mm Package 12 MHz Speed 16 KB Memory
MOQ: 1 |

ATTINY1634-MU Overview

The Microchip Technology ATTINY1634-MU is an 8-bit AVR enhanced RISC microcontroller with a 12 MHz maximum clock, 16 KB of in-system programmable Flash memory, 1 KB of SRAM, and 18 general-purpose I/O pins in a 20-pin QFN package with an exposed pad. It operates from 2.5 V to 5 V and integrates a 12-channel 10-bit ADC, four PWM channels, two timers, SPI, I2C, and USART peripherals.

A tinyAVR microcontroller is a compact 8-bit MCU built around the AVR enhanced RISC architecture. Within the semiconductor hierarchy, an MCU combines a processor core, memory, analog conversion, timers, and serial interfaces on one die. The ATtiny1634 family combines that integration with low-power operation and in-system programmability, making it suitable for compact embedded controllers that need more than basic digital I/O without the size of a larger microcontroller.

The principal features of the ATTINY1634-MU include 16 KB of Flash, 1 KB of SRAM, 18 I/O pins, and operation up to 12 MHz. Its 12-channel ADC supports analog measurements from sensors and resistive dividers, while the four PWM channels can drive LED dimming, motor control, or signal generation. SPI, I2C, and USART interfaces provide paths to external sensors, display controllers, memory, and host systems without consuming separate serial peripherals.

The AVR architecture executes instructions in a single clock cycle, providing responsive control for event-driven firmware. Brown-out detection and a watchdog timer support reliable operation by detecting abnormal supply conditions and recovering from stalled firmware. The exposed pad under the 20-pin QFN package provides a thermal path into the PCB, making copper-pad layout important when the MCU operates continuously near its upper clock limit.

Typical applications include industrial sensor nodes, compact motor controllers, LED lighting modules, battery-powered monitoring equipment, instrumentation front ends, and small serial-interface products. The ATTINY1634-MU is particularly useful when a board needs flexible digital control alongside analog sensing, while the 16 KB Flash capacity allows more complex state machines and protocol handling than the smallest members of the tinyAVR family.

PCB implementation should preserve short return paths from the exposed pad to a solid ground plane and place decoupling capacitors close to the supply pins. Designers should also budget regulator headroom for the selected 2.5 V, 3.3 V, or 5 V rail, verify operating limits against the selected clock configuration, and reserve programming access for ISP programming and debugging.

This product record combines the manufacturer specifications, package details, interface capabilities, and drop-in alternatives with practical guidance for decoupling, thermal design, firmware constraints, and interface integration. It is intended to help engineers evaluate the ATTINY1634-MU against same-family alternatives before committing a compact embedded design to a 20-pin QFN footprint.

Drop-in alternatives for ATTINY1634-MU — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

ATTINY1634-MUR

✅ Drop-In
📦 20-pin QFN with exposed pad, 4 mm x 4 mm
Same 12 MHz, 16 KB Flash, 18-I/O, and 20-pin QFN exposed-pad configuration; ATTINY1634-MUR is associated with reel shipment, a 0% change in the listed core specifications.

📋 Reference alternative (not in catalog)

ATTINY1634-MNR

✅ Drop-In
📦 20-pin QFN with exposed pad, 4 mm x 4 mm
Same listed 12 MHz, 16 KB Flash, 18-I/O, and 20-pin QFN exposed-pad configuration; the ATTINY1634-MNR ordering suffix may specify different packing or qualification terms requiring manufacturer confirmation.

📋 Reference alternative (not in catalog)

ATTINY1634-MU Maximum Ratings & Electrical Characteristics

Architecture 8-bit AVR enhanced RISC
Maximum Clock Frequency 12 MHz
Flash Memory 16 KB
Flash Organization 16K x 8 bytes
SRAM 1 KB
Data Bus Width 8 bits
General-Purpose I/O Pins 18 pins
ADC Channels 12 channels
PWM Channels 4 channels
Timers/Counters 2
Serial Interfaces I2C, SPI, UART/USART
Operating Supply Voltage 2.5 V to 5 V
Package 20-pin QFN with exposed pad, 4 mm x 4 mm
Mounting Type Surface mount
Shipping Format Tray
Brown-Out Detection Yes
Watchdog Timer Yes
Programming Interface In-system programming and debug

ATTINY1634-MU 20-pin qfn with exposed pad, 4 mm x 4 mm Pin Configuration Guide

Pin configuration for ATTINY1634-MU (20-pin qfn with exposed pad, 4 mm x 4 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

20-pin qfn with exposed pad, 4 mm x 4 mm package pinout diagram for ATTINY1634-MU

No detailed pinout data available for ATTINY1634-MU.

Refer to the datasheet for full pin configuration.

Typical Applications

ATTINY1634-MU is suitable for 6 applications: Industrial Sensor Node, LED Lighting Controller, Compact Motor Controller, Battery-Powered Monitor, Instrumentation Front End, Serial Interface Controller.

🏭

Industrial Sensor Node

The ATTINY1634-MU fits compact industrial sensor nodes because its 12-channel ADC can acquire several analog inputs while 18 I/O pins handle digital sensors, alarms, and communication lines. The 8-bit AVR core operates up to 12 MHz, providing responsive handling of local filtering and control logic, while 16 KB of Flash accommodates application firmware and 1 KB of SRAM supports working state. SPI, I2C, and USART allow the node to connect to local sensing, storage, or supervisory electronics. In an industrial design, isolate sensitive analog routing from switching circuitry, use a regulated low-noise supply, and validate the node against the manufacturer electrical limits for the selected voltage and temperature conditions.

💡

LED Lighting Controller

The ATTINY1634-MU is well suited to LED lighting control because four PWM channels can drive multiple dimming or color-mixing channels without separate timer peripherals. Its 18 I/O pins can support pushbuttons, occupancy inputs, status indicators, and fault signals, while the 12-channel ADC can monitor current or temperature conditions when suitable sensing circuitry is added. The 16 KB Flash capacity is useful for storing lighting scenes, fade tables, and communication handlers. A practical implementation should use transistor driver stages for LED current, keep high-current switching paths away from analog inputs, and derive timer parameters from the selected clock configuration rather than assuming a fixed frequency.

🔧

Compact Motor Controller

The ATTINY1634-MU can serve as the control processor in a compact brushed-motor or low-power actuator controller. Its four PWM channels support speed, position, or step-rate commands, while the ADC can sample potentiometers, hall sensors, or current-sense signals. Eighteen I/O pins provide room for direction controls, limit switches, and communications, and the 12 MHz AVR core provides sufficient control throughput for many embedded motor algorithms. The MCU should not drive the motor directly; use appropriately rated transistors, flyback protection, and current limiting. Firmware should also incorporate stall or timeout behavior so a mechanical fault does not leave the PWM outputs active indefinitely.

🧩

Battery-Powered Monitor

The ATTINY1634-MU fits battery-powered monitoring products where a compact controller must combine sensing, local logic, and serial reporting. Its 12-channel ADC supports battery-voltage and environmental measurements, while I2C and SPI provide connections to low-power sensors or memory. The 8-bit architecture and 1 KB SRAM allow event filtering and threshold logic without requiring a large embedded system, and the 16 KB Flash provides space for calibration data and communication routines. To maximize operating life, use the family’s low-power operating modes, disable unused peripherals, and choose external sensors and pull networks that do not dominate the standby current of the complete board.

📺

Instrumentation Front End

The ATTINY1634-MU can act as the control and conditioning element in a compact instrumentation front end. Its 12-channel ADC supports several sensor inputs, its 18 I/O pins can operate switches, indicators, and front-panel controls, and its UART/USART capability allows a host computer to configure the instrument or retrieve measurements. The 16 KB Flash and 1 KB SRAM are suitable for calibration tables, filtering state, and a user interface state machine. Analog accuracy depends on the complete signal chain, so use a stable reference, controlled source impedance, appropriate filtering, and careful grounding. Firmware should also report out-of-range conditions instead of saturating readings without warning.

🌐

Serial Interface Controller

The ATTINY1634-MU is effective as a dedicated serial-interface controller because it combines I2C, SPI, UART/USART, 18 I/O pins, and a 12 MHz AVR core in a 20-pin QFN package. It can act as a protocol bridge, configuration interface, or peripheral controller while managing local digital inputs and outputs. Sixteen kilobytes of Flash is adequate for framing logic and several protocol handlers, and the integrated watchdog can help recover from communication stalls or firmware faults. For robust board integration, define buffer direction and speed limits, include pull-up or termination components required by the selected bus, and use the manufacturer programming guidance to preserve access to ISP and debugging functions.

Recommended Products Summary

ATTINY1634-MUR Same-core reel-format option Used in: Industrial Sensor Node, LED Lighting Controller, Battery-Powered Monitor, Serial Interface Controller ATTINY1634-MNR Same-core ordering alternative Used in: Industrial Sensor Node, Compact Motor Controller, Battery-Powered Monitor, Instrumentation Front End, Serial Interface Controller ATTINY1634 Base family member Used in: LED Lighting Controller, Instrumentation Front End ATTINY1634-MU Microchip Technology Used in: Compact Motor Controller
What are the key specifications of ATTINY1634-MU that engineers should know?
The ATTINY1634-MU is an 8-bit AVR MCU with a 12 MHz maximum clock, 16 KB of Flash, 1 KB of SRAM, and 18 I/O pins. According to the Microchip ATtiny1634 datasheet, it also provides a 12-channel ADC, four PWM channels, two timers, SPI, I2C, and USART interfaces in a 20-pin QFN package with an exposed pad. Its 2.5 V to 5 V operating range supports multiple embedded supply systems.
Where can I download the ATTINY1634-MU datasheet PDF?
The ATTINY1634-MU datasheet PDF is available from Microchip Technology through the official ATtiny1634 datasheet link on this page. The manufacturer document describes the 8-bit AVR architecture, 16 KB Flash, 1 KB SRAM, peripheral set, electrical characteristics, package information, and programming interfaces. Use the manufacturer datasheet as the controlling reference for pin assignments, clock limits, voltage conditions, and board-layout requirements.
Where can I find the ATTINY1634-MU pinout?
The ATTINY1634-MU pinout is defined in the manufacturer ATtiny1634 datasheet, including the exposed thermal pad used by the 20-pin QFN package. The package contains 20 device pins in a 4 mm by 4 mm footprint. For PCB work, assign signals from the datasheet pin-description and package diagrams rather than relying on a generic QFN drawing, because exposed-pad connectivity and programming pins are device-specific.
Can ATTINY1634-MU be used for ADC-based sensor measurements?
Yes, the ATTINY1634-MU is suitable for compact analog-sensing designs because it includes a 12-channel ADC. The datasheet identifies 12 ADC channels, while the device also offers 18 I/O pins for switches, indicators, and control signals. Keep analog inputs away from fast-switching traces, provide a stable reference and supply arrangement, and follow the manufacturer input-voltage limits before selecting sensor ranges.
What communication interfaces does ATTINY1634-MU support?
The ATTINY1634-MU supports SPI, I2C, and UART/USART. According to the Microchip ATtiny1634 family documentation, this combination allows the MCU to connect serial sensors, EEPROMs, displays, and external controllers while retaining UART communication for a host or service interface. Firmware must assign the appropriate peripheral pins, configure the clock source, and follow the electrical requirements of each connected bus.
What can replace ATTINY1634-MU without changing the PCB footprint?
ATTINY1634-MUR and ATTINY1634-MNR are the closest documented same-package alternatives, both listed in the 20-pin QFN exposed-pad format and carrying the same 12 MHz, 16 KB Flash, and 18-I/O positioning as the ATTINY1634-MU. ATTINY1634-MUR is primarily a reel-format option, while ATTINY1634-MNR has a different ordering suffix. Confirm suffix-specific electrical ratings, temperature grade, and packing details before substitution.
Is ATTINY1634-MU suitable for motor and LED control?
The ATTINY1634-MU is suitable for small motor-control and LED-driving systems because it provides four PWM channels, 18 I/O pins, and an 8-bit AVR core operating up to 12 MHz. It can generate the required pulse-width-modulated drive signals while monitoring feedback through its ADC. External transistors are still needed because the MCU pins are control signals and are not intended to drive inductive or high-current loads directly.
How do ATTINY1634-MU and ATTINY1634-MUR differ?
ATTINY1634-MU and ATTINY1634-MUR are identified as the same Microchip ATtiny1634 device in the 20-pin QFN exposed-pad format with 12 MHz operation and 16 KB Flash. Their most visible difference is the ordering suffix, where ATTINY1634-MU is associated with tray shipment and ATTINY1634-MUR with reel shipment. The manufacturer ordering information should be checked for any additional suffix-specific temperature or marking distinction.
When should I choose ATTINY1634-MU over another ATtiny microcontroller?
Choose the ATTINY1634-MU when a design needs 16 KB of Flash, 1 KB of SRAM, 18 I/O pins, a 12-channel ADC, and SPI, I2C, and USART in a compact 20-pin QFN package. A smaller ATtiny device may be preferable when the application needs fewer I/O, less memory, or a simpler package. This part offers a stronger peripheral balance without moving to a larger general-purpose MCU architecture.
What is the difference between ATTINY1634-MU and ATTINY1634-MNR?
Both ATTINY1634-MU and ATTINY1634-MNR are listed as Microchip ATtiny1634 8-bit AVR microcontrollers with a 12 MHz maximum clock, 16 KB Flash, and a 20-pin QFN exposed-pad package. Their ordering suffixes may distinguish packing, marking, or qualification terms that are not fully visible in the catalog excerpts. Treat them as footprint-compatible candidates, but verify the complete ordering information before approving a production substitution.
Where can I buy ATTINY1634-MU with current availability and lead time?
Use the Request a Quote form on this page to request current ATTINY1634-MU availability, lead time, and order quantities for the exact 20-pin QFN tray ordering code. The request should identify ATTINY1634-MU explicitly because ATTINY1634-MUR and ATTINY1634-MNR use different suffixes and packing formats. This avoids accidentally quoting a related member of the ATtiny1634 family.
What is the price of ATTINY1634-MU?
The current price of ATTINY1634-MU depends on order quantity, packaging format, and supply conditions, so it is best requested through the Request a Quote form on this page. Quote the exact MPN ATTINY1634-MU and the required quantity to obtain an actionable commercial response. Do not substitute ATTINY1634-MUR or ATTINY1634-MNR, because their ordering suffixes may correspond to different packing arrangements.
Is ATTINY1634-MU in stock?
Current ATTINY1634-MU stock status should be confirmed through the Request a Quote form on this page. Because inventory can change by package, quantity, and region, a live quote provides a more reliable answer than a general catalog status. Include the required quantity and whether the target ATTINY1634-MU tray configuration is acceptable in your request.
How should the ATTINY1634-MU QFN exposed pad be handled on a PCB?
The ATTINY1634-MU exposed pad should be connected to the board ground plane according to the Microchip package and land-pattern guidance. Use a thermal-via array within the exposed-pad footprint and avoid placing high-current or switching paths directly beneath the device. The pad provides both electrical and thermal functions, so its layout affects supply integrity, heat removal, and assembly yield.
Is there an ATtiny1634 Arduino-compatible option?
The ATTINY1634 family supports in-system programming and debug, but compatibility with an Arduino board depends on the selected board's bootloader, connector, voltage levels, and supported MCU family. The ATTINY1634 is not automatically interchangeable with common ATmega328P-based Arduino Uno boards because its pinout and bootloader environment differ. Verify the exact board schematic, programming connector, and firmware support before using ATTINY1634-MU on an Arduino-compatible design.
What is the best Microchip equivalent for ATTINY1634-MU?
ATTINY1634-MNR is the closest documented Microchip ordering candidate with the same 12 MHz, 16 KB Flash, and 20-pin QFN exposed-pad positioning, followed by ATTINY1634-MUR when reel shipment is appropriate. No cross-manufacturer equivalent was established as pin-to-pin compatible in the available cross-reference material. For production use, confirm the complete suffix definitions and device revision with Microchip rather than treating a family-level search result as a guaranteed replacement.

Engineering reference data for ATTINY1634-MU — comparison, design guidance, and compliance information.

Selection Guide

Choose the ATTINY1634-MU when the design needs the 20-pin QFN exposed-pad footprint, operation up to 12 MHz, 16 KB of Flash, 1 KB of SRAM, 18 I/O pins, a 12-channel ADC, and I2C, SPI, and USART connectivity. Its four PWM channels also make it useful for LED and compact motor-control products. Select ATTINY1634-MUR when reel packaging is preferred for automated assembly; the core catalog specifications remain the same. Consider ATTINY1634-MNR only after confirming the complete suffix-specific ordering, qualification, temperature, and marking requirements. No cross-manufacturer drop-in alternative was established, so changing vendors may require firmware, peripheral, and pin-level revalidation. For designs needing substantially more Flash, RAM, I/O, or higher clock performance, move to a larger MCU family rather than forcing a near match into this device.

Comparison with Alternatives

Parameter This Product ATTINY1634-MUR ATTINY1634-MNR
Brand Microchip Technology Microchip Technology Microchip Technology
Package 20-pin QFN with exposed pad, 4 mm x 4 mm 20-pin QFN with exposed pad, 4 mm x 4 mm 20-pin QFN with exposed pad, 4 mm x 4 mm
Architecture 8-bit AVR enhanced RISC 8-bit AVR enhanced RISC 8-bit AVR enhanced RISC
Maximum Clock Frequency 12 MHz 12 MHz 12 MHz
Flash Memory 16 KB 16 KB 16 KB
Orderable Format ATTINY1634-MU tray format ATTINY1634-MUR reel format ATTINY1634-MNR ordering format

Key Differentiators

  • Combines analog conversion and three serial interfaces in a compact controller (vs ATTINY1634-MUR)
  • Matches the 12 MHz and 16 KB Flash core configuration of the documented ordering alternatives (vs ATTINY1634-MNR)
  • Provides substantial memory and I/O for a compact embedded design (vs ATTINY1634-MUR)

Design Notes

Treat the QFN exposed pad as both an electrical and thermal feature. Connect it to the same ground net specified by the manufacturer, place a thermal-via array inside the land pattern, and maintain uninterrupted ground-plane area beneath the device. Place input and output decoupling capacitors close to their corresponding supply pins, with the smallest capacitor closest to the pin, to limit supply transients as the AVR core and peripherals switch.

Select the regulator for the complete 2.5 V, 3.3 V, or 5 V operating condition rather than its nominal value alone. Account for startup current, peripheral load, clock configuration, temperature, and regulator tolerance. If the clock changes between low-frequency sleep operation and the 12 MHz maximum, verify that the supply remains within the manufacturer operating range during the transition and that brown-out settings do not interrupt valid operation.

Do not infer that every ATTINY1634 ordering suffix has identical qualification, temperature, marking, or packing terms. The target ATTINY1634-MU is associated with a 20-pin QFN tray configuration, while ATTINY1634-MUR is associated with reel shipment and ATTINY1634-MNR uses another ordering suffix. Confirm the complete manufacturer ordering information, exposed-pad layout, and firmware support before approving any substitution.

Route analog inputs away from PWM outputs, clock edges, and high-current switching paths. Use short traces, a continuous ground reference, and filtering matched to the sensor bandwidth. I2C, SPI, and USART lines should follow their respective topology, including the required pull-ups, termination, and signal-level constraints. Preserve the ISP and debug connections in the layout so programming remains possible after final assembly.

Use the watchdog timer as a recovery mechanism rather than as a substitute for deterministic firmware design. Production firmware should reset shared outputs, reload timer and counter registers, and return peripherals to safe states during initialization. In battery-powered products, disable unused timers, ADC channels, and serial interfaces before entering long sleep intervals so that quiescent current remains controlled by the complete application design.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Compliance status was not stated in the manufacturer or catalog material used for this record. The exposed-pad QFN package and operating voltage range are confirmed, but environmental qualification and material-compliance claims require confirmation from Microchip Technology for the exact ordering code.

Data verified on: 2026-11-14 — data verified and curated by XAIPART's component engineering team

Related Searches

attiny1634 datasheet attiny1634 pinout attiny1634 mur attiny1634 mnr attiny1634 arduino ATTINY1634-MU datasheet ATTINY1634-MU pinout ATTINY1634-MU QFN footprint ATTINY1634-MU drop-in replacement ATTINY1634-MU vs ATTINY1634-MUR ATTINY1634-MU price ATTINY1634-MU stock

Related Components & Terms

Microchip Technology ATTINY1634-MU ATTINY1634-MUR ATTINY1634-MNR ATTINY1634 AVR enhanced RISC architecture 8-bit microcontroller tinyAVR microcontroller semiconductor 16 KB Flash memory 1 KB SRAM 12 MHz clock 12-channel ADC PWM SPI I2C UART/USART brown-out detection watchdog timer 20-pin QFN exposed pad surface mount in-system programming industrial sensor node
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details