ATTINY261A-PU - 8-Bit 20MHz AVR Microcontroller | Microchip
部品番号: ATTINY261A-PU ✓ 生産中ATTINY261A-PU 概要
An 8-bit microcontroller is a programmable semiconductor that executes instructions from nonvolatile flash memory and uses registers and internal SRAM while processing sensor, control, and communication tasks. Within the product hierarchy, the ATTINY261A-PU belongs to the Microchip AVR family of reduced-instruction-set controllers. Its compact instruction architecture, 32 working registers, and integrated peripherals make it suitable for embedded systems, consumer appliances, industrial controllers, and compact control products.
Key features include a 20 MHz maximum clock rate, 2 KB flash organized as 1K × 16 words, 128 B of EEPROM, 128 B of SRAM, 16 general-purpose I/O lines, and 32 general-purpose working registers. An 8-bit timer/counter with compare modes supports timing and event-control functions. The器件 also combines an ISP-capable architecture with a modest pin count, allowing programming, sensing, switching, and communication functions to share one economical package.
The ATTINY261A-PU belongs to Microchip's picoPower-oriented ATtiny261A generation. Its reduced internal-memory footprint distinguishes it from larger AVR microcontrollers, while the 16 I/O lines provide more control and communication resources than very small legacy devices. Its 20 MHz operating capability supports faster control-loop execution than lower-clock 8-bit controllers, although actual throughput depends on the compiled firmware, peripheral configuration, and clock arrangement.
Typical uses include compact motor and actuator controllers, low-cost industrial interface modules, LED-lighting controllers, smart sensors, and embedded control boards. The 2 KB flash capacity is best suited to concise firmware, while 128 B of SRAM accommodates working variables and short data buffers. Designers should confirm application code size, timing margin, and peripheral requirements before committing to this memory-limited member of the AVR family.
A primary design consideration is pin allocation. Sixteen I/O pins leave limited space for power, ground, programming, reset, communication, and analog functions in the 20-pin PDIP package. Use the manufacturer pin-description table when assigning tracks, preserve access to programming and debugging signals, and avoid loading a pin with a peripheral that prevents its intended alternate function. Component tolerances and decoupling should follow the device's recommended application circuit.
This product summary combines the manufacturer's device description with practical guidance on memory sizing, pin planning, firmware limits, and drop-in migration. It also distinguishes the current ATTINY261A-PU ordering code from the documented, functionally identical but obsolete ATTINY261-20PU migration path.
ドロップイン代替品: ATTINY261A-PU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATTINY261A-PU (同一形状・フットプリント) — 相違点: EEPROM, Mounting Type, Package, SRAM.
ATTINY261-20PU
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATTINY261A-PU 最大定格&電気的特性
| Device Type | 8-bit AVR RISC-based microcontroller |
| 最大クロック周波数 | 20 MHz |
| Flash Memory | 2 KB (1K × 16 words) |
| EEPROM | 128 B |
| SRAM | 128 B |
| General-Purpose I/O Lines | 16 |
| General-Purpose Working Registers | 32 |
| Timer/Counter | 8-bit with compare modes |
| パッケージ | 20-pin PDIP |
| 実装タイプ | Through-hole |
| Programming | In-system programmable |
ATTINY261A-PU 20-pin pdip ピン配置ガイド
ATTINY261A-PU (20-pin pdip パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATTINY261A-PU.
詳細は データシート をご参照ください。
主な用途
ATTINY261A-PU の用途: 6 件s: Compact Motor and Actuator Control, Smart Sensor Interface Module, LED Lighting Controller, Industrial Interface and Relay Module, Consumer Appliance Embedded Control, Programmable Logic and Timing Module.
Compact Motor and Actuator Control
The ATTINY261A-PU fits compact motor and actuator controllers because its 20 MHz AVR core can execute timing-sensitive control firmware while 16 I/O lines provide access to sensors, switches, and drive signals. The 8-bit timer/counter with compare modes is useful for generating periodic events or coordinating a simple actuator. The 2 KB flash limit and 128 B SRAM require disciplined firmware sizing, but they are adequate for compact closed-loop control, status indicators, and safety checks. Designers should assign timer functions before committing other pins and validate timing at the intended clock and operating voltage.
おすすめ
Smart Sensor Interface Module
The ATTINY261A-PU can serve as the controller in a small smart-sensor interface where a sensor output must be sampled, conditioned logically, and reported through a serial link. Its 16 I/O lines allow several digital inputs, status LEDs, and interface signals to share the 20-pin PDIP package. With 2 KB of flash, firmware should be concise and avoid large buffering; the 128 B SRAM is suitable for compact state variables. Confirm the exact analog-conversion and serial-interface requirements against the manufacturer datasheet before finalizing the pin map.
おすすめ
LED Lighting Controller
The ATTINY261A-PU is appropriate for compact LED-lighting controllers that combine timed output sequences, button or sensor inputs, and low-cost status feedback. Its timer/counter supports deterministic scheduling, while 16 I/O lines can be allocated among lighting outputs and control inputs. The 2 KB program-memory capacity favors table-driven or compact firmware, and the 128 B SRAM is adequate when color or animation state is stored efficiently. Because peripheral functions are multiplexed, assign timer-capable pins first and account for boot, reset, and programming requirements in the PCB layout.
おすすめ
Industrial Interface and Relay Module
The ATTINY261A-PU can implement a compact industrial interface module for translating switches, sensors, or field-level signals into controlled outputs. Its 8-bit RISC architecture and 20 MHz maximum clock permit responsive state-machine logic, while 16 I/O lines provide practical connectivity in a 20-pin PDIP footprint. Because memory is limited to 2 KB flash and 128 B SRAM, diagnostics and protocol handling must be compact. For production equipment, add appropriate input protection and isolation according to the actual interface environment, and validate all timing against the required industrial conditions.
おすすめ
Consumer Appliance Embedded Control
The ATTINY261A-PU suits low-cost appliance subcontrollers that coordinate buttons, indicators, small actuators, and a limited serial control link. Its 16 I/O lines and integrated timer provide enough resources for a focused control board without an external microcontroller, while in-system programming supports production programming. The memory footprint is the principal constraint: a 2 KB flash budget favors simple state machines, and 128 B of SRAM limits data buffering. Validate startup behavior, reset requirements, and supply conditions before using the part in appliances with safety-related functions.
おすすめ
Programmable Logic and Timing Module
The ATTINY261A-PU can act as a compact programmable-logic or timing module for panel controls, event counters, and deterministic sequencing tasks. The 8-bit timer/counter with compare modes supports periodic events, while 32 working registers and a 20 MHz clock provide useful execution headroom for compact firmware. Its 16 I/O lines allow external inputs to drive state transitions and outputs to report results. Because 2 KB of flash and 128 B of SRAM constrain algorithm size, avoid large lookup tables or buffering unless the application can be reduced before PCB release.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATTINY261A-PU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATTINY261-20PU |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 20-pin PDIP | 20-pin PDIP |
| CPU Architecture | 8-bit AVR RISC | 8-bit AVR RISC |
| Maximum Clock Frequency | 20 MHz | 20 MHz |
| Flash Memory | 2 KB (1K × 16) | 2 KB |
| EEPROM | 128 B | 128 B |
| SRAM | 128 B | 128 B |
| General-Purpose I/O Lines | 16 | 16 |
| Working Registers | 32 | 32 |
| Lifecycle Status | Active | Obsolete |
主な差別化要因
- Preferred lifecycle status for new production designs (vs ATTINY261-20PU)
- Current-generation device with a documented legacy migration path (vs ATTINY261-20PU)
- Pin-compatible service replacement without changing the legacy PCB (vs ATTINY261-20PU)
設計ノート
Allocate the 20-pin PDIP footprint from the exact ATTINY261A-PU pin description before assigning board functions. Keep programming and reset access unobstructed, place the device where its pin numbering remains visible, and route sensitive or high-speed signals away from adjacent switching nodes. The 16 I/O lines share pins with alternate peripheral functions, so reserving timer-capable and communication-capable pins early prevents late schematic changes.
Use the manufacturer's recommended supply and decoupling arrangement for the ATtiny261A generation. Place the supply bypass capacitor close to the device's supply pin, provide a low-impedance ground return, and verify power sequencing against the chosen clock and programming configuration. The 20 MHz clock rating does not define the allowable supply range, so voltage limits and operating conditions must come from the device datasheet rather than inference.
Estimate the final binary against the 2 KB flash limit, including startup code, interrupt vectors, library routines, and configuration data. The 128 B SRAM should be checked for stack depth, interrupt interaction, and buffer overlap. Also avoid assuming that ATTINY261-20PU is electrically identical in every respect: Microchip documents functional drop-in compatibility but notes that changed manufacturing processes can alter electrical characteristics.
Keep oscillator, programming, and timing-sensitive routes short where applicable, and maintain consistent return paths under the device pins. Because the PDIP package exposes long leads, assess electrostatic-discharge protection and contamination risks in industrial or moisture-prone installations. A protection network can change input thresholds or switching behavior, so validate it together with the assembled sensor or actuator interface rather than evaluating it in isolation.
コンプライアンス情報
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified in the accessible manufacturer or product listing information.