ATTINY828R-AU - 20MHz 8-Bit AVR MCU | Microchip Technology
部品番号: ATTINY828R-AU ✓ 生産中ATTINY828R-AU 概要
An 8-bit AVR microcontroller is a compact embedded-control device built around an enhanced RISC core and non-volatile program memory. The AVR architecture belongs to the broader semiconductor hierarchy of microcontrollers, embedded processors, and programmable controllers. Devices in this class combine firmware storage, general-purpose I/O, analog conversion, and timing peripherals in one package, allowing compact products to perform control, sensing, communication, and actuator functions without a separate processor.
The ATTINY828R-AU is based on Microchip's picoPower technology and provides 8 KB of Flash organized as 8K x 8, together with 256 bytes of EEPROM and 512 bytes of SRAM. Its 28 GPIO pins provide flexible connections for switches, sensors, displays, and control signals. The 10-bit ADC is available on GPIO pins, while the 8-bit and 16-bit timer/counters support timing, waveform generation, and PWM-based functions.
The enhanced AVR RISC core executes instructions in a single clock cycle, giving the device throughput approaching 1 MIPS per MHz under suitable operating conditions. This architecture is useful in responsive embedded-control loops because it can complete instruction sequences quickly while retaining the simplicity of an 8-bit platform. picoPower technology is intended to help reduce power consumption in compact, battery-operated equipment.
Typical uses include industrial sensor nodes, compact motor controllers, LED lighting controllers, wearable accessories, smart-home modules, and compact consumer appliances. In these systems, the microcontroller can acquire analog measurements through its ADC, execute control algorithms from Flash, and operate timers or PWM outputs while retaining a small 32-pin surface-mount footprint.
PCB design should preserve clean analog grounding near ADC inputs, route high-current or switching signals away from sensitive measurement traces, and follow the manufacturer's pin and decoupling guidance. Firmware should use the documented AVR peripheral libraries and account for watchdog, sleep, brownout, and clock configuration behavior before production deployment.
This page combines the ATtiny828 family specifications, package information, source links, application guidance, and a focused replacement analysis to help engineers evaluate the ATTINY828R-AU for embedded-control designs.
ドロップイン代替品: ATTINY828R-AU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATTINY828R-AU (同一形状・フットプリント) — 相違点: Mounting Type, Package, Product Type.
ATTINY828-AUR
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →ATTINY828R-AU 最大定格&電気的特性
| Product Type | 8-bit AVR RISC microcontroller |
| 最大クロック周波数 | 20 MHz |
| Architecture | Enhanced AVR RISC |
| Flash Memory | 8 KB (8K x 8) |
| Program Memory Type | In-system programmable Flash |
| EEPROM | 256 bytes |
| Internal SRAM | 512 bytes |
| GPIO Pins | 28 |
| ADC Resolution | 10 bits |
| ADC Channel Availability | Available on GPIO pins |
| Timer/Counter 0 | 8-bit timer/counter |
| Timer/Counter 1 | 16-bit timer/counter with PWM |
| Low-Power Technology | picoPower |
| パッケージ | 32-pin TQFP, 7 x 7 mm |
| 実装タイプ | Surface mount |
ATTINY828R-AU 32-pin tqfp, 7 x 7 mm ピン配置ガイド
ATTINY828R-AU (32-pin tqfp, 7 x 7 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATTINY828R-AU.
詳細は データシート をご参照ください。
主な用途
ATTINY828R-AU の用途: 6 件s: Industrial Sensor Node, LED Lighting Controller, Compact Motor Controller, Smart Home Sensor Module, Battery-Powered Wearable Accessory, Consumer Appliance Controller.
Industrial Sensor Node
The ATTINY828R-AU fits compact industrial sensor nodes because its 28 GPIO pins can support digital sensors and actuators while the 10-bit ADC acquires analog process signals. The 20 MHz AVR core provides responsive control-loop execution, and 8 KB of in-system programmable Flash accommodates acquisition, filtering, diagnostics, and communication routines. The 512-byte SRAM supports temporary measurement and protocol buffers. Place analog inputs on their assigned GPIO pins, retain clean supply and ground routing, and verify industrial temperature requirements against the manufacturer operating limits before deployment.
おすすめ
LED Lighting Controller
The ATTINY828R-AU is appropriate for LED lighting control because its 16-bit timer/counter with PWM can generate dimming waveforms while the 8-bit timer/counter supports additional timing functions. Its 28 GPIO pins leave ample connections for LED drive controls, buttons, status indicators, and communication lines. The 10-bit ADC can also monitor a potentiometer, light sensor, or current-feedback signal. Firmware should synchronize PWM updates carefully, account for the AVR core's 20 MHz maximum clock, and validate LED current limits in the external driver stage rather than sourcing load current directly from the MCU.
おすすめ
Compact Motor Controller
The ATTINY828R-AU can supervise a compact motor-control subsystem by combining PWM generation, general-purpose GPIO, and direct analog sensing. The 16-bit timer/counter with PWM supports duty-cycle-based speed or position control, while the 10-bit ADC can sample a current sensor, potentiometer, or position reference. Its 8 KB Flash capacity is suitable for small control algorithms and protective routines. Place the MCU and sensing circuitry away from motor switching nodes, use a separate gate-driver power stage, and include current limiting and fault shutdown because the microcontroller does not directly replace external motor-driver protection.
おすすめ
Smart Home Sensor Module
The ATTINY828R-AU suits a smart-home sensor module that must consolidate analog measurement, digital inputs, and local control in a small surface-mount package. Its 10-bit ADC accepts sensor inputs through GPIO, 28 GPIO pins support switches and digital peripherals, and 8 KB of Flash holds application logic. The picoPower architecture is relevant to battery-powered or duty-cycled nodes, allowing the firmware to use sleep modes between measurements. Validate standby current and wake-up behavior in the final board configuration, and use the manufacturer pin table when assigning ADC-capable pins to avoid conflicts with PWM or other peripherals.
おすすめ
Battery-Powered Wearable Accessory
The ATTINY828R-AU can serve as the control core in a compact wearable accessory because its picoPower architecture, 8 KB Flash, 512-byte SRAM, and 28 GPIO pins provide control capability without a large processor package. A 10-bit ADC can monitor a biometric or motion-related analog signal, while the timer peripherals support periodic sampling and haptic or indicator timing. In a wearable design, power behavior must be evaluated across active and sleep states using the manufacturer's current specifications. Keep analog traces short, maintain low-impedance grounding, and separate switching-regulator layout from sensitive sensor inputs.
おすすめ
Consumer Appliance Controller
The ATTINY828R-AU is suitable for a compact consumer appliance controller that combines button handling, sensor input, timing, and low-power standby. The 28 GPIO pins can support displays, switches, relays, and digital interfaces, while the 10-bit ADC monitors analog control signals. The 8-bit and 16-bit timer/counters cover short timing tasks and PWM outputs, and 8 KB of in-system programmable Flash provides room for state-machine firmware. Robust production designs should implement brownout-aware startup, watchdog recovery, debouncing, and relay-state validation. Confirm the exact electrical limits and temperature range before using the device in appliance environments near heat sources.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATTINY828R-AU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATTINY828-AUR |
|---|---|---|
| Package | 32-TQFP (7x7) | 32-TQFP (7x7) |
| Brand | Microchip Technology | Microchip Technology |
| Architecture | 8-bit AVR enhanced RISC | 8-bit AVR enhanced RISC |
| Maximum Clock Frequency | 20 MHz | 20 MHz |
| Flash Memory | 8 KB (8K x 8) | 8 KB |
| EEPROM | 256 bytes | 256 bytes |
| Internal SRAM | 512 bytes | 512 bytes |
| GPIO Pins | 28 | 28 |
| ADC Resolution | 10 bits | 10 bits |
| Ordering Format | AU tray format | AUR tape-and-reel format |
主な差別化要因
- Combines 28 GPIO with a 10-bit ADC (vs ATTINY828-AUR)
- Production packaging matches tray-fed assembly (vs ATTINY828-AUR)
- Compact 8-bit control with picoPower technology (vs ATTINY828-AUR)
設計ノート
Assign the PCB footprint from the manufacturer's 32-pin TQFP drawing and place the decoupling capacitor close to the device power pins. Keep analog-capable GPIO routes away from switching nodes and high-current return paths. Because 28 GPIO pins can support multiple analog channels, review the complete pin-description table before assigning multiplexed functions; this prevents a peripheral assignment from conflicting with an ADC or timer input.
Battery-powered designs should use the manufacturer sleep-mode, active-current, and wake-up data to calculate average consumption rather than relying on headline clock speed. The ATTINY828R-AU uses picoPower technology, but external regulators, pull resistors, sensors, and communication circuitry can dominate system current. Validate duty-cycle behavior, brownout margin, and regulator startup timing across the complete product load range.
Do not treat ATTINY828R-AU and ATTINY828-AUR as identical solely because both belong to the ATtiny828 family. The ordering suffixes indicate different production formats, and the selected part number must match the assembler requirements. Before substituting any related device, verify the 32-pin footprint, power and ground assignments, programming pins, reset behavior, fuse defaults, ADC channels, timer functions, and absolute electrical limits.
Route oscillator, programming, and reset signals away from analog inputs and switching-power circuitry. Use a continuous ground reference beneath the device where practical, keep sensor traces short, and terminate unused inputs according to the manufacturer's recommendations. For designs using the ADC, sample during stable settling periods and calibrate offsets and gain at the product level because reference and board-layout effects can influence the usable 10-bit measurement range.
コンプライアンス情報
The available manufacturer and distributor information does not state a specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals classification for ATTINY828R-AU. AEC-Q100 is not applicable because the device is presented as a general-purpose 8-bit microcontroller rather than an automotive-qualified variant.