Microchip Technology

ATTINY828R-AU - 20MHz 8-Bit AVR MCU | Microchip Technology

MPN: ATTINY828R-AU ✓ فعال
32-pin TQFP, 7 x 7 mm Package 20 MHz Speed 8 KB (8K x 8) Memory
حداقل سفارش: 1 |

ATTINY828R-AU نمای کلی

Microchip Technology ATTINY828R-AU is an 8-bit AVR RISC microcontroller operating at up to 20 MHz, with 8 KB of in-system programmable Flash, 256 bytes of ISP EEPROM, 512 bytes of internal SRAM, and 28 GPIO pins in a 32-pin TQFP package. The device also includes a 10-bit ADC, an 8-bit timer/counter, and a 16-bit timer/counter with PWM.

An 8-bit AVR microcontroller is a compact embedded-control device built around an enhanced RISC core and non-volatile program memory. The AVR architecture belongs to the broader semiconductor hierarchy of microcontrollers, embedded processors, and programmable controllers. Devices in this class combine firmware storage, general-purpose I/O, analog conversion, and timing peripherals in one package, allowing compact products to perform control, sensing, communication, and actuator functions without a separate processor.

The ATTINY828R-AU is based on Microchip's picoPower technology and provides 8 KB of Flash organized as 8K x 8, together with 256 bytes of EEPROM and 512 bytes of SRAM. Its 28 GPIO pins provide flexible connections for switches, sensors, displays, and control signals. The 10-bit ADC is available on GPIO pins, while the 8-bit and 16-bit timer/counters support timing, waveform generation, and PWM-based functions.

The enhanced AVR RISC core executes instructions in a single clock cycle, giving the device throughput approaching 1 MIPS per MHz under suitable operating conditions. This architecture is useful in responsive embedded-control loops because it can complete instruction sequences quickly while retaining the simplicity of an 8-bit platform. picoPower technology is intended to help reduce power consumption in compact, battery-operated equipment.

Typical uses include industrial sensor nodes, compact motor controllers, LED lighting controllers, wearable accessories, smart-home modules, and compact consumer appliances. In these systems, the microcontroller can acquire analog measurements through its ADC, execute control algorithms from Flash, and operate timers or PWM outputs while retaining a small 32-pin surface-mount footprint.

PCB design should preserve clean analog grounding near ADC inputs, route high-current or switching signals away from sensitive measurement traces, and follow the manufacturer's pin and decoupling guidance. Firmware should use the documented AVR peripheral libraries and account for watchdog, sleep, brownout, and clock configuration behavior before production deployment.

This page combines the ATtiny828 family specifications, package information, source links, application guidance, and a focused replacement analysis to help engineers evaluate the ATTINY828R-AU for embedded-control designs.

جایگزین‌های drop-in برای ATTINY828R-AU — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای ATTINY828R-AU (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Mounting Type, Package, Product Type.

Microchip Technology
Mounting Type: Surface-mount
Package: 32-pin TQFP, 7 mm x 7 mm
Product Type: 8-bit AVR RISC-based microcontroller (MCU)
مقایسه با ATTINY828R-AU →

ATTINY828-AUR

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Microchip Technology
📦 32-TQFP (7x7)
8-bit AVR RISC-based microcontroller (MCU) · 20 MHz · 8 KB in-system programmable Flash · 256 bytes · 512 bytes · 28 GPIO pins · 10 bits · 1 x 8-bit timer/counter and 1 x 16-bit timer/counter with PWM

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ATTINY828R-AU حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type 8-bit AVR RISC microcontroller
حداکثر فرکانس کلاک 20 MHz
Architecture Enhanced AVR RISC
Flash Memory 8 KB (8K x 8)
Program Memory Type In-system programmable Flash
EEPROM 256 bytes
Internal SRAM 512 bytes
GPIO Pins 28
ADC Resolution 10 bits
ADC Channel Availability Available on GPIO pins
Timer/Counter 0 8-bit timer/counter
Timer/Counter 1 16-bit timer/counter with PWM
Low-Power Technology picoPower
بسته‌بندی 32-pin TQFP, 7 x 7 mm
نوع نصب Surface mount

راهنمای پیکربندی پین ATTINY828R-AU 32-pin tqfp, 7 x 7 mm

پیکربندی پین برای ATTINY828R-AU (پکیج 32-pin tqfp, 7 x 7 mm). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 32-pin tqfp, 7 x 7 mm برای ATTINY828R-AU

داده پین‌آوت تفصیلی موجود نیست برای ATTINY828R-AU.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ATTINY828R-AU مناسب است برای 6 کاربردs: Industrial Sensor Node, LED Lighting Controller, Compact Motor Controller, Smart Home Sensor Module, Battery-Powered Wearable Accessory, Consumer Appliance Controller.

🏭

Industrial Sensor Node

The ATTINY828R-AU fits compact industrial sensor nodes because its 28 GPIO pins can support digital sensors and actuators while the 10-bit ADC acquires analog process signals. The 20 MHz AVR core provides responsive control-loop execution, and 8 KB of in-system programmable Flash accommodates acquisition, filtering, diagnostics, and communication routines. The 512-byte SRAM supports temporary measurement and protocol buffers. Place analog inputs on their assigned GPIO pins, retain clean supply and ground routing, and verify industrial temperature requirements against the manufacturer operating limits before deployment.

💡

LED Lighting Controller

The ATTINY828R-AU is appropriate for LED lighting control because its 16-bit timer/counter with PWM can generate dimming waveforms while the 8-bit timer/counter supports additional timing functions. Its 28 GPIO pins leave ample connections for LED drive controls, buttons, status indicators, and communication lines. The 10-bit ADC can also monitor a potentiometer, light sensor, or current-feedback signal. Firmware should synchronize PWM updates carefully, account for the AVR core's 20 MHz maximum clock, and validate LED current limits in the external driver stage rather than sourcing load current directly from the MCU.

🔧

Compact Motor Controller

The ATTINY828R-AU can supervise a compact motor-control subsystem by combining PWM generation, general-purpose GPIO, and direct analog sensing. The 16-bit timer/counter with PWM supports duty-cycle-based speed or position control, while the 10-bit ADC can sample a current sensor, potentiometer, or position reference. Its 8 KB Flash capacity is suitable for small control algorithms and protective routines. Place the MCU and sensing circuitry away from motor switching nodes, use a separate gate-driver power stage, and include current limiting and fault shutdown because the microcontroller does not directly replace external motor-driver protection.

🧩

Smart Home Sensor Module

The ATTINY828R-AU suits a smart-home sensor module that must consolidate analog measurement, digital inputs, and local control in a small surface-mount package. Its 10-bit ADC accepts sensor inputs through GPIO, 28 GPIO pins support switches and digital peripherals, and 8 KB of Flash holds application logic. The picoPower architecture is relevant to battery-powered or duty-cycled nodes, allowing the firmware to use sleep modes between measurements. Validate standby current and wake-up behavior in the final board configuration, and use the manufacturer pin table when assigning ADC-capable pins to avoid conflicts with PWM or other peripherals.

📱

Battery-Powered Wearable Accessory

The ATTINY828R-AU can serve as the control core in a compact wearable accessory because its picoPower architecture, 8 KB Flash, 512-byte SRAM, and 28 GPIO pins provide control capability without a large processor package. A 10-bit ADC can monitor a biometric or motion-related analog signal, while the timer peripherals support periodic sampling and haptic or indicator timing. In a wearable design, power behavior must be evaluated across active and sleep states using the manufacturer's current specifications. Keep analog traces short, maintain low-impedance grounding, and separate switching-regulator layout from sensitive sensor inputs.

🔧

Consumer Appliance Controller

The ATTINY828R-AU is suitable for a compact consumer appliance controller that combines button handling, sensor input, timing, and low-power standby. The 28 GPIO pins can support displays, switches, relays, and digital interfaces, while the 10-bit ADC monitors analog control signals. The 8-bit and 16-bit timer/counters cover short timing tasks and PWM outputs, and 8 KB of in-system programmable Flash provides room for state-machine firmware. Robust production designs should implement brownout-aware startup, watchdog recovery, debouncing, and relay-state validation. Confirm the exact electrical limits and temperature range before using the device in appliance environments near heat sources.

What are the key specifications of ATTINY828R-AU that engineers should know?
The ATTINY828R-AU is an 8-bit AVR microcontroller with a 20 MHz maximum clock, 8 KB of ISP Flash, 256 bytes of EEPROM, 512 bytes of SRAM, and 28 GPIO pins. According to the Microchip ATtiny828 product page and manufacturer datasheet, it also provides a 10-bit ADC, an 8-bit timer/counter, and a 16-bit timer/counter with PWM in a 32-pin TQFP package.
What is ATTINY828R-AU and what can it do?
The ATTINY828R-AU is a compact 8-bit AVR RISC microcontroller designed for embedded control, sensing, and timing tasks. Microchip identifies 8 KB of in-system programmable Flash, 256 bytes of EEPROM, 512 bytes of internal SRAM, 28 GPIO pins, a 10-bit ADC, and two timer/counter resources. Its picoPower implementation supports low-power product designs requiring programmable logic, analog measurement, and PWM control.
Where can I download the ATTINY828R-AU datasheet PDF?
The ATTINY828R-AU datasheet is available from Microchip Technology's official ATtiny828 documentation. The manufacturer PDF contains the complete pin description, electrical characteristics, memory organization, peripheral details, and package drawings. Use the official document for PCB layout and firmware development, and consult the ATtiny828 product page for current lifecycle and support information.
Where can I find the ATTINY828R-AU pinout?
The ATTINY828R-AU pinout is shown in the pin-description and package-drawing sections of the Microchip ATtiny828 manufacturer datasheet. The device is specified in a 32-pin TQFP package measuring 7 x 7 mm. Assign each PCB net from the datasheet pin table rather than inferring connections from a generic TQFP drawing, because power, ground, programming, reset, and analog pins must all follow the exact device description.
How much memory does ATTINY828R-AU have?
The ATTINY828R-AU provides 8 KB of in-system programmable Flash, 256 bytes of EEPROM, and 512 bytes of internal SRAM. The manufacturer describes the Flash as 8K x 8 bits. These three memory types support bootable application firmware, non-volatile parameter storage, and working data respectively, making the device suitable for compact control products with moderate firmware complexity.
Does ATTINY828R-AU have ADC and PWM peripherals?
The ATTINY828R-AU includes a 10-bit ADC and a 16-bit timer/counter with PWM. Microchip also identifies an 8-bit timer/counter, while the product page states that ADC channels are available on GPIO pins. These resources allow a design to acquire analog sensor signals, execute control logic, and generate PWM outputs without requiring separate conversion and timing ICs.
ATTINY828R-AU vs ATTINY828-AUR - which is the better choice?
The ATTINY828R-AU and ATTINY828-AUR are closely related ATtiny828 choices, but the ordering suffix identifies different orderable configurations. The ATTINY828R-AU is the specified 32-TQFP tray configuration, while ATTINY828-AUR is a tape-and-reel ordering option. Choose according to assembly method, then verify the complete ordering code against the manufacturer datasheet before placing the component in a production BOM.
When should I choose ATTINY828R-AU instead of ATTINY828-AUR?
Choose ATTINY828R-AU when the assembly process is designed for a tray rather than a tape-and-reel feed. Choose ATTINY828-AUR for automated pick-and-place or reel-based production. Functionally, both belong to the ATtiny828 family with 20 MHz operation, 8 KB Flash, 256-byte EEPROM, 512-byte SRAM, and a 10-bit ADC, but the package drawing and orderable suffix must be checked before treating them as interchangeable.
What is the best drop-in replacement for ATTINY828R-AU?
No independently verified cross-manufacturer drop-in replacement was identified for the ATTINY828R-AU. The closest orderable related device is the Microchip ATTINY828-AUR, which shares the ATtiny828 family and 32-pin TQFP format but uses a tape-and-reel ordering suffix. A true drop-in decision still requires checking every pin, programming interface, clock, memory map, and peripheral against the manufacturer datasheet.
Can ATTINY828-AUR replace ATTINY828R-AU on the same PCB?
ATTINY828-AUR is the most plausible related drop-in candidate because it belongs to the ATtiny828 family and uses the same 32-pin TQFP format, but ordering suffixes must not be treated as automatically interchangeable. Confirm the pinout, electrical limits, fuse behavior, and package drawing in the Microchip datasheet. If the required variant is not a true pin-to-pin match, use the ATTINY828R-AU tray ordering code.
What is the best Microchip equivalent for ATTINY828R-AU?
The best supported Microchip equivalent is ATTINY828-AUR, subject to final ordering-code and pinout verification. It belongs to the same ATtiny828 family and retains the 20 MHz AVR core, 8 KB Flash, 256-byte EEPROM, 512-byte SRAM, and 10-bit ADC. The engineering distinction is the production packaging suffix: AU is associated with a tray format, while AUR identifies a reel format.
Is ATTINY828R-AU suitable for battery-powered embedded products?
The ATTINY828R-AU is suitable for many battery-powered embedded products because it combines an 8-bit AVR core with Microchip picoPower technology. Its 512 bytes of SRAM and modest 8 KB Flash footprint are appropriate for compact control tasks, while the 10-bit ADC supports direct sensor interfacing. Final battery-life calculations should use the manufacturer's sleep-mode and active-current data for the actual operating mode.
How should ATTINY828R-AU be programmed?
The ATTINY828R-AU supports in-system programming through a serial interface, and its 8 KB Flash may also be programmed through conventional non-volatile-memory programmers or an on-chip boot loader according to the manufacturer datasheet. Use an ISP-compatible programmer that matches the device's programming and fuse requirements. Verify the selected programmer's device database and the manufacturer's recommended connector arrangement before production use.
Where can I buy ATTINY828R-AU and check its current lead time?
Use the Request a Quote form on this page to request the current ATTINY828R-AU price, stock position, minimum order quantity, and production lead time. Quote requests should identify the exact ATTINY828R-AU ordering code and the required tray quantity. Microchip's product page is also useful for checking the current ATtiny828 family lifecycle status and supported documentation.
What is the price of ATTINY828R-AU?
The current ATTINY828R-AU unit price is not stated on this page because pricing changes with quantity and market conditions. Submit a Request a Quote form with the required order quantity, packaging expectation, and target delivery date. The form provides a transaction-specific response without embedding a stale price figure in the technical description.
Is ATTINY828R-AU in stock and what is its lead time?
Current stock and lead time for ATTINY828R-AU should be confirmed through the Request a Quote form on this page. Include your required quantity, shipment destination, production schedule, and whether the tray ordering format is mandatory. Microchip's ATtiny828 product page provides the family lifecycle context, while a quote response reflects current procurement conditions.

داده‌های مرجع مهندسی برای ATTINY828R-AU — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the ATTINY828R-AU when the PCB uses the 32-pin TQFP footprint and the production process requires the AU tray ordering format. It provides 28 GPIO pins, an 10-bit ADC, 8 KB of ISP Flash, 256 bytes of EEPROM, and 512 bytes of SRAM, making it appropriate for compact sensor, lighting, appliance, and embedded-control products. ATTINY828-AUR is the closest same-family choice when reel-fed assembly is preferred and the manufacturer ordering details confirm compatibility. No cross-manufacturer drop-in alternative should be selected solely from a generic equivalence listing because peripheral mapping, programming behavior, clock implementation, and electrical limits can differ even when memory sizes match. For designs needing more flash, SRAM, serial interfaces, or processing throughput, consider another member of the ATtiny or AVR family, but treat that as a redesign rather than a pin-compatible substitution.

مقایسه با جایگزین‌ها

پارامتر این محصول ATTINY828-AUR
Package 32-TQFP (7x7) 32-TQFP (7x7)
Brand Microchip Technology Microchip Technology
Architecture 8-bit AVR enhanced RISC 8-bit AVR enhanced RISC
Maximum Clock Frequency 20 MHz 20 MHz
Flash Memory 8 KB (8K x 8) 8 KB
EEPROM 256 bytes 256 bytes
Internal SRAM 512 bytes 512 bytes
GPIO Pins 28 28
ADC Resolution 10 bits 10 bits
Ordering Format AU tray format AUR tape-and-reel format

تفاوت‌های کلیدی

  • Combines 28 GPIO with a 10-bit ADC (در مقابلATTINY828-AUR)
  • Production packaging matches tray-fed assembly (در مقابلATTINY828-AUR)
  • Compact 8-bit control with picoPower technology (در مقابلATTINY828-AUR)

یادداشت‌های طراحی

Assign the PCB footprint from the manufacturer's 32-pin TQFP drawing and place the decoupling capacitor close to the device power pins. Keep analog-capable GPIO routes away from switching nodes and high-current return paths. Because 28 GPIO pins can support multiple analog channels, review the complete pin-description table before assigning multiplexed functions; this prevents a peripheral assignment from conflicting with an ADC or timer input.

Battery-powered designs should use the manufacturer sleep-mode, active-current, and wake-up data to calculate average consumption rather than relying on headline clock speed. The ATTINY828R-AU uses picoPower technology, but external regulators, pull resistors, sensors, and communication circuitry can dominate system current. Validate duty-cycle behavior, brownout margin, and regulator startup timing across the complete product load range.

Do not treat ATTINY828R-AU and ATTINY828-AUR as identical solely because both belong to the ATtiny828 family. The ordering suffixes indicate different production formats, and the selected part number must match the assembler requirements. Before substituting any related device, verify the 32-pin footprint, power and ground assignments, programming pins, reset behavior, fuse defaults, ADC channels, timer functions, and absolute electrical limits.

Route oscillator, programming, and reset signals away from analog inputs and switching-power circuitry. Use a continuous ground reference beneath the device where practical, keep sensor traces short, and terminate unused inputs according to the manufacturer's recommendations. For designs using the ADC, sample during stable settling periods and calibrate offsets and gain at the product level because reference and board-layout effects can influence the usable 10-bit measurement range.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The available manufacturer and distributor information does not state a specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals classification for ATTINY828R-AU. AEC-Q100 is not applicable because the device is presented as a general-purpose 8-bit microcontroller rather than an automotive-qualified variant.

تاریخ تأیید داده‌ها: 2026-11-19 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ATTINY828R-AU datasheet ATTINY828R-AU pinout ATTINY828R-AU datasheet pdf ATTINY828R-AU specifications ATTINY828R-AU equivalent ATTINY828R-AU replacement ATTINY828R-AU cross reference ATTINY828R-AU vs ATTINY828-AUR ATTINY828R-AU 32 TQFP footprint ATTINY828R-AU 20MHz 8KB flash Microchip ATTINY828R-AU ATTINY828R-AU price ATTINY828R-AU stock ATTINY828R-AU ADC PWM application

قطعات و اصطلاحات مرتبط

Microchip Technology ATTINY828R-AU ATTINY828-AUR ATtiny828 8-bit AVR microcontroller AVR enhanced RISC architecture TinyAVR RISC microcontroller embedded microcontroller picoPower technology in-system programmable Flash EEPROM internal SRAM 10-bit ADC PWM 8-bit timer/counter 16-bit timer/counter 28 GPIO pins 32-TQFP TQFP package surface-mount package industrial sensor node LED lighting controller battery-powered embedded product ISP programming
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ