ATXMEGA128C3-AU - 32MHz 128KB AVR Microcontroller | Microchip
部品番号: ATXMEGA128C3-AU ✓ 生産中ATXMEGA128C3-AU 概要
An AVR XMEGA microcontroller is an 8-bit RISC microcontroller family that combines a modified Harvard architecture, event-driven peripherals, and multi-level interrupt handling. The XMEGA hierarchy extends from the AVR instruction set into the XMEGA family of 8-bit microcontrollers and, more broadly, embedded processors used for real-time control, communications, data acquisition, and human-machine-interface tasks.
Key features include 128 KB of in-system programmable flash with read-while-write capability, an 8 KB boot-code section, 8 KB of SRAM, and 2 KB of EEPROM. The four-channel event system connects peripherals through a hardware event channel, reducing CPU intervention for time-critical tasks. A programmable multi-level interrupt controller, 50 GPIO lines, and a 16-bit real-time counter support responsive control loops and periodic services.
The device operates from a 1.6 V to 3.6 V supply and is identified as an industrial-temperature TQFP variant. Its 32 MHz performance supports more demanding embedded workloads than smaller AVR devices while retaining the familiar 8-bit AVR programming model. The 64-pin package exposes substantially more I/O than smaller 32-pin and 48-pin MCU packages, making it suitable for boards requiring multiple buses, timers, communication interfaces, or mixed-signal control.
Typical uses include industrial control panels, building automation, motor and climate-control systems, metering equipment, data loggers, communications modules, and compact user-interface controllers. The 50 available GPIO lines are particularly useful when an application needs several digital inputs and outputs alongside timer-based control. The ATXMEGA128C3-AU also works with Microchip's MPLAB tool ecosystem and PICkit-compatible programming workflows.
For PCB design, provide the manufacturer-recommended decoupling network and route sensitive analog or communication interfaces away from high-current switching nodes. Confirm the complete 64-pin pin-description table, fuse configuration, clock plan, and programming interface against the Microchip datasheet before fabrication. The 14 x 14 mm TQFP footprint also requires a footprint-qualified assembly process with adequate thermal-relief design around the exposed pad area if one is specified.
This product record combines the core device specifications, sourcing guidance, programming references, and design considerations engineers need when evaluating the ATXMEGA128C3-AU for a new embedded-control design.
ドロップイン代替品: ATXMEGA128C3-AU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
ATXMEGA128C3-AN
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATXMEGA128C3-AU 最大定格&電気的特性
| Product Type | 8/16-bit AVR XMEGA C3 microcontroller |
| 最大クロック周波数 | 32 MHz |
| Flash Memory | 128 KB (64K x 16) |
| Boot Code Section | 8 KB |
| SRAM | 8 KB |
| EEPROM | 2 KB |
| General-Purpose I/O Lines | 50 |
| Event System Channels | 4 |
| Real-Time Counter | 16-bit |
| 動作電源電圧 | 1.6 V to 3.6 V |
| Supported Supply Levels | 1.8 V, 2.5 V, and 3.3 V |
| Instruction Architecture | 8-bit AVR RISC |
| Program Memory Type | In-system programmable flash |
| Read-While-Write Support | Yes |
| Interrupt Controller | Programmable multi-level interrupt controller |
| パッケージ | 64-TQFP |
| Package Body Size | 14 x 14 mm |
| 実装タイプ | Surface mount |
| RoHS ステータス | Compliant |
ATXMEGA128C3-AU 14 x 14 mm ピン配置ガイド
ATXMEGA128C3-AU (14 x 14 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATXMEGA128C3-AU.
詳細は データシート をご参照ください。
主な用途
ATXMEGA128C3-AU の用途: 6 件s: Industrial Control Panels, Building Automation, Climate and Motor Control, Data Loggers and Metering, Communications Gateways, Human-Machine Interfaces.
Industrial Control Panels
The ATXMEGA128C3-AU fits industrial control panels that combine many digital inputs, indicator outputs, timers, and serial communications. Its 50 GPIO lines leave substantial board-level connectivity, while the 32 MHz CPU and 8 KB of SRAM provide room for a structured control application. The four-channel event system can connect timer, counter, and communication activity, reducing the need for polling. The 1.6 V to 3.6 V operating range also supports common embedded rails. Designers should budget decoupling and isolation for field-connected inputs, while validating startup, watchdog behavior, and brownout recovery for unattended industrial equipment.
おすすめ
Building Automation
The ATXMEGA128C3-AU is suitable for building-automation controllers that coordinate lighting, climate equipment, access controls, and occupancy sensing. Its 50 GPIO lines support multiple digital sensors and relay drivers, while the 16-bit real-time counter helps schedule recurring tasks. The four-channel event system can improve responsiveness when several timed functions must occur predictably. At 32 MHz with 128 KB of flash, the device can host communication stack logic alongside application firmware. Keep long field-wiring routes away from sensitive circuitry, provide suitable input conditioning, and test power-loss restart behavior before deployment in occupied buildings.
おすすめ
Climate and Motor Control
The ATXMEGA128C3-AU can coordinate climate-control or motor-control peripherals when the design requires numerous I/O and deterministic periodic handling. The event system provides hardware links between timers and peripherals, while the 16-bit real-time counter supports timing functions and the 32 MHz processor provides additional application headroom. Its 8 KB SRAM is useful for buffering samples or maintaining control state, and 128 KB of flash accommodates firmware plus calibration parameters. Use isolated gate drivers for power switches, maintain short current paths, and verify that all actuator timing remains safe under reset and supply-loss conditions.
おすすめ
Data Loggers and Metering
The ATXMEGA128C3-AU supports compact metering and data-logging products that must acquire periodic measurements while maintaining a low-power embedded design. The combination of 128 KB flash, 2 KB EEPROM, and 8 KB SRAM permits local buffering, configuration storage, and firmware upgrades. Its 16-bit real-time counter is useful for sample timing, and the four-channel event system can coordinate acquisition events with communication activity. A precision ADC can provide the measurement front end, while the MCU handles configuration, timestamping, and data transfer. Validate input scaling, calibration storage, and low-power wake behavior across the complete operating range.
おすすめ
Communications Gateways
The ATXMEGA128C3-AU can serve as the control processor in a small communications gateway when the design requires protocol handling alongside local I/O. Its 32 MHz execution rate, 128 KB flash, and 8 KB SRAM can support stack configuration, framing, status tracking, and local supervision. The event system helps connect communication timing with counters or status outputs, while the 50 GPIO lines allow status indicators, configuration inputs, and auxiliary interfaces. Board designers should maintain short return paths, separate sensitive analog routing from digital activity, and confirm clock and power conditions with the selected transceiver before production release.
おすすめ
Human-Machine Interfaces
The ATXMEGA128C3-AU is appropriate for compact human-machine interfaces because its 64-pin package exposes 50 GPIO lines for displays, keys, indicators, and encoder inputs. The 32 MHz processor and 8 KB of SRAM support responsive menu and debounce logic, while the four-channel event system can coordinate display updates with periodic input activity. Its 1.6 V to 3.6 V range allows integration with low-voltage display and communication circuitry. Keep display and touch interfaces away from noisy switching stages, use series damping where required by the display interface, and verify that the PCB assembly process can consistently terminate the fine-pitch 14 x 14 mm TQFP footprint.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATXMEGA128C3-AU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATXMEGA128C3-AN |
|---|---|---|
| Package | 64-TQFP (14 x 14 mm) | 64-TQFP |
| Brand | Microchip Technology | Microchip Technology |
| Product Family | AVR XMEGA C3 | AVR XMEGA C3 |
主な差別化要因
- Higher pin count than smaller AVR XMEGA controller packages (vs ATXMEGA128C3-AN)
- Substantial memory for an 8-bit embedded controller (vs ATXMEGA128C3-AN)
- Event-driven peripheral integration (vs ATXMEGA128C3-AN)
設計ノート
Use the Microchip ATxmega128C3 package drawing as the authority for all 64 land assignments, pin 1 orientation, and exposed-pad treatment. Place the device so that noisy switching stages and high-current return paths do not run beneath or beside the MCU. Preserve access to the programming and reset signals, and provide a manufacturing-compatible land pattern for the 14 x 14 mm TQFP package. Verify every pin assignment against the complete pin-description table rather than assigning signals from a generic 64-pin footprint.
Design the supply network for the documented 1.6 V to 3.6 V operating range and place local bypass capacitance at the device supply pins using the values and layout shown in the manufacturer reference circuit. Keep the supply loop compact, provide adequate source impedance margin, and account for startup current when sizing the regulator. Brownout, watchdog, and reset behavior should be validated under slow supply ramps because industrial systems can experience power-quality events that do not occur in a laboratory supply.
Assign communications, timer capture, and analog-adjacent signals with attention to source impedance and adjacent switching activity. The four-channel event system reduces CPU polling, but it does not remove the need for clean peripheral routing. Separate clocks and sensitive inputs from high-current outputs, use ground-plane continuity without broken return paths, and apply series termination only when the edge rate and trace topology require it. Scope the highest-risk interface during prototype validation rather than relying only on functional testing.
Do not confuse the ATXMEGA128C3-AU ordering suffix with a generic TQFP designation. Confirm operating-temperature grade, qualification, packing format, programming configuration, and device revision through the Microchip ordering information. Also avoid assuming that a related ATxmega128C3 suffix is an unconditional substitute: even when the 64-pin package matches, qualification and temperature attributes can differ. Record the approved MPN in firmware documentation and purchasing controls to prevent accidental substitution during maintenance or redesign.
コンプライアンス情報
RoHS compliance is identified in the component listing. Other environmental and material compliance attributes require confirmation from the manufacturer or current material-declaration documentation.