ATXMEGA16E5-MNR - 32MHz, 16KB Flash AVR MCU | Microchip
部品番号: ATXMEGA16E5-MNR ✓ 生産中ATXMEGA16E5-MNR 概要
An 8/16-bit microcontroller combines an 8-bit-oriented instruction set with enhanced RISC processing architecture and peripheral integration. The AVR XMEGA E5 family belongs to the broader embedded-control hierarchy: microcontroller, embedded processor, semiconductor, and programmable controller. Its event system, communication peripherals, and 32 MHz processing speed make it suitable for compact control, sensing, communications, and low-power embedded products.
The ATXMEGA16E5-MNR provides 16 KB of ISP flash plus a 4 KB boot-code section, supporting read-while-write operation. Its 2 KB SRAM provides working memory for protocols and control routines, while 512 bytes of EEPROM retain calibration or configuration data when power is removed. The eight-channel event system can connect timer, comparator, and interrupt activity without excessive CPU intervention.
The device integrates an eight-channel 12-bit ADC and two 12-bit DAC channels according to the family datasheet. Communication capabilities include I2C, SPI, UART, and IrDA interfaces, allowing the MCU to connect sensors, displays, data converters, and industrial peripherals while reducing external component count. A programmable multi-level interrupt system supports responsive event handling.
Typical uses include industrial sensor modules, compact control panels, low-power data-acquisition nodes, communication bridges, and compact embedded control systems. The 32-VQFN exposed-pad package supports compact layouts but requires careful PCB thermal design and exposed-pad soldering. The 1.6 V to 3.6 V operating range is appropriate for regulated 3.3 V systems and lower-voltage designs where applicable.
For PCB implementation, connect the exposed pad to the ground plane and follow the manufacturer land-pattern and reflow recommendations. Provide the required decoupling capacitors close to the supply pins, keep high-current return paths compact, and route sensitive analog signals away from switching nodes. The operating voltage must remain within 1.6 V to 3.6 V.
This product page combines manufacturer specifications, package details, lifecycle information, sourcing guidance, and design-focused comparisons. It also distinguishes exact-ordering-code alternatives from package or memory variants that cannot be treated as drop-in replacements.
ドロップイン代替品: ATXMEGA16E5-MNR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
ATXMEGA16E5-M4NR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATXMEGA16E5-M4UR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATXMEGA16E5-MNR 最大定格&電気的特性
| Product Type | 8/16-bit AVR XMEGA E5 microcontroller |
| 最大クロック周波数 | 32 MHz |
| Flash Memory | 16 KB (8K x 16) |
| Boot Flash Section | 4 KB |
| SRAM | 2 KB |
| EEPROM | 512 bytes |
| Operating Voltage Range | 1.6 V to 3.6 V |
| パッケージ | 32-VQFN (5 mm x 5 mm) with exposed pad |
| 実装タイプ | Surface mount |
| ADC | 8-channel, 12-bit |
| DAC | 2-channel, 12-bit |
| Event System | 8 channels |
| Serial Interfaces | I2C, SPI, UART, IrDA |
| Programming | In-system programming |
| Flash Read-While-Write | Supported |
| RoHS ステータス | Compliant |
ATXMEGA16E5-MNR 32-vqfn (5 mm x 5 mm) with exposed pad ピン配置ガイド
ATXMEGA16E5-MNR (32-vqfn (5 mm x 5 mm) with exposed pad パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATXMEGA16E5-MNR.
詳細は データシート をご参照ください。
主な用途
ATXMEGA16E5-MNR の用途: 6 件s: Industrial Sensor Node, Low-Power Data Acquisition, Communication Bridge, Compact Control Panel, Battery-Powered Embedded Device, Precision Signal Generator.
Industrial Sensor Node
The ATXMEGA16E5-MNR fits compact industrial sensor nodes that must acquire analog measurements and communicate through a short serial link. Its eight-channel 12-bit ADC supports multiple sensor inputs, while the 32 MHz AVR core provides enough performance for filtering, calibration, and protocol handling. The 16 KB flash and 2 KB SRAM suit firmware that includes conversion routines and a configurable communications stack. A 1.6 V to 3.6 V operating range integrates cleanly with regulated sensor-node rails. Keep analog traces away from digital switching paths and follow the exposed-pad land pattern to maintain reliable thermal performance.
おすすめ
Low-Power Data Acquisition
The ATXMEGA16E5-MNR is suitable for low-power data-acquisition modules that periodically sample sensors and transmit compact measurements. Its eight-channel 12-bit ADC reduces the need for external analog converters, and the event system can coordinate timer-driven sampling and peripheral events without continuous processor polling. The 2 KB SRAM supports temporary sample buffering, while 16 KB of flash accommodates firmware and calibration parameters. Sleep-mode behavior and clock selection should be configured around the acquisition interval. Place input filtering close to the MCU and provide the manufacturer-recommended supply decoupling to keep analog measurements repeatable.
おすすめ
Communication Bridge
The ATXMEGA16E5-MNR can act as a compact communication bridge between sensors, actuators, and a host controller. Its I2C, SPI, UART, and IrDA interfaces allow the same firmware architecture to support several short-range and wired links, while the 32 MHz core handles framing and protocol conversion. The 8/16-bit AVR enhanced RISC architecture is useful for event-driven control, and the programmable multi-level interrupt system improves responsiveness to incoming traffic. Validate signal levels and timing on every connected interface. Keep serial routing away from the ADC and DAC signals to reduce coupling into measurement channels.
おすすめ
Compact Control Panel
The ATXMEGA16E5-MNR fits compact control panels requiring local sensing, output control, and serial host connectivity. Its two 12-bit DAC channels can generate analog control or test signals, while the eight-channel ADC supports feedback from controls and sensors. The event system helps coordinate timer events, comparator activity, and interrupts for responsive user-interface behavior. Its 2 KB SRAM and 16 KB flash are appropriate for moderate control logic rather than graphics-heavy workloads. Use the exposed ground pad and compact decoupling layout to minimize thermal rise, and confirm all connector and display timing against the selected peripheral configuration.
おすすめ
Battery-Powered Embedded Device
The ATXMEGA16E5-MNR is appropriate for battery-powered embedded devices that combine low-power operation with useful local processing. The XMEGA E5 family is positioned as a low-power, high-performance 8/16-bit platform, and the event system can reduce the need for continuous CPU polling during intermittent operation. Its integrated ADC, DAC, and multiple serial interfaces can remove several discrete devices from a compact design. Power-budget calculations should include MCU sleep current, active time, load-switch losses, and peripheral leakage. Configure unused interfaces and pins appropriately, then verify startup and brownout behavior across the complete 1.6 V to 3.6 V supply range.
おすすめ
Precision Signal Generator
The ATXMEGA16E5-MNR can support compact precision signal-generation and test-control products because it combines two 12-bit DAC channels with an eight-channel 12-bit ADC for loopback measurement. The 32 MHz core can update control routines, and the event system provides a hardware mechanism for synchronizing timers and peripheral events. This arrangement is useful for calibration, stimulus, and feedback-control functions where a larger system would be unnecessary. For high-accuracy analog results, treat the converter performance as dependent on reference, supply, layout, and calibration. Keep the DAC and ADC paths short and follow the datasheet grounding recommendations around the analog supply network.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATXMEGA16E5-MNR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATXMEGA16E5-M4NR | ATXMEGA16E5-M4UR |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 32-VQFN (5 mm x 5 mm) with exposed pad | 32-VQFN with exposed pad | 32-VQFN with exposed pad |
| Core Speed | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 16 KB | 16 KB | 16 KB |
| SRAM | 2 KB | 2 KB | 2 KB |
| EEPROM | 512 bytes | 512 bytes | 512 bytes |
| Core Architecture | AVR 8/16-bit | AVR 8/16-bit | AVR 8/16-bit |
| Serial Interfaces | I2C, SPI, UART, IrDA | I2C, SPI, UART, IrDA | I2C, SPI, UART, IrDA |
主な差別化要因
- Integration of multiple mixed-signal and communications resources (vs ATXMEGA16E5-M4NR)
- Compact exposed-pad land pattern for space-constrained products (vs ATXMEGA16E5-M4UR)
- Event-driven control without external coordination logic (vs ATXMEGA16E5-M4NR)
設計ノート
The 32-VQFN package includes an exposed thermal pad that must be soldered and connected to the ground plane. Place thermal vias beneath the pad only when they do not compromise the manufacturer land pattern or assembly process. Estimated: with the package power dissipation P and the effective board-to-ambient thermal resistance theta_total, the approximate junction rise is T_J - T_A = P x theta_total. Evaluate that rise against the device temperature limit because the exposed pad is essential to sustained performance.
Place the required input and output capacitors immediately beside their associated power pins, using the shortest possible current-loop path. Route the exposed-pad ground connection to a low-impedance ground plane and avoid splitting that plane beneath the device. Confirm the pad dimensions, solder-mask clearance, and paste pattern against the Microchip package drawing. A copied footprint from a generic VQFN-32 library may be dimensionally incorrect.
Separate analog inputs and DAC outputs from fast digital and serial signals when the board area permits. Use a continuous ground reference, keep ADC traces compact, and place any input filtering near the source or MCU according to the required settling time. For communication interfaces, check input thresholds and output levels at the 1.6 V to 3.6 V supply extremes. The integrated converters and event system are useful, but layout still determines practical analog performance.
Do not treat every ATxmega16E5 ordering code as interchangeable. A change from ATXMEGA16E5-MNR to ATXMEGA16E5-M4NR or ATXMEGA16E5-M4UR may preserve the 16 KB flash, 32 MHz speed, and 32-VQFN package while changing suffix-specific attributes such as grade, qualification, or shipping format. Review the Microchip ordering table, temperature requirements, programming setup, and assembly format before releasing a replacement into production.
Design the supply network for both low-voltage operation and transient load current. The ATXMEGA16E5-MNR supports a 1.6 V to 3.6 V range, but the chosen regulator must maintain the required voltage at the MCU and connected peripherals across temperature and load. Check the minimum operating voltage during startup, validate brownout behavior, and keep converter switching loops compact. Low headline supply voltage does not remove the need for local bypass capacitance and stable reference routing.
コンプライアンス情報
RoHS compliance is listed for the exact MPN. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation through the Request a Quote workflow.