Microchip Technology

ATXMEGA16E5-MNR - 32MHz, 16KB Flash AVR MCU | Microchip

MPN: ATXMEGA16E5-MNR ✓ פעיל
1.6 V to 3.6 V Vdss 32-VQFN (5 mm x 5 mm) with exposed pad Package 32 MHz Speed 16 KB (8K x 16) Memory
כמות הזמנה מינימלית: 1 |

ATXMEGA16E5-MNR סקירה

The Microchip Technology ATXMEGA16E5-MNR is a low-power, peripheral-rich 8/16-bit AVR XMEGA E5 microcontroller with a 32 MHz clock, 16 KB flash memory, 2 KB SRAM, and 512 bytes of EEPROM. It is packaged in a 32-pin VQFN with a 5 mm by 5 mm exposed-pad footprint and operates from 1.6 V to 3.6 V.

An 8/16-bit microcontroller combines an 8-bit-oriented instruction set with enhanced RISC processing architecture and peripheral integration. The AVR XMEGA E5 family belongs to the broader embedded-control hierarchy: microcontroller, embedded processor, semiconductor, and programmable controller. Its event system, communication peripherals, and 32 MHz processing speed make it suitable for compact control, sensing, communications, and low-power embedded products.

The ATXMEGA16E5-MNR provides 16 KB of ISP flash plus a 4 KB boot-code section, supporting read-while-write operation. Its 2 KB SRAM provides working memory for protocols and control routines, while 512 bytes of EEPROM retain calibration or configuration data when power is removed. The eight-channel event system can connect timer, comparator, and interrupt activity without excessive CPU intervention.

The device integrates an eight-channel 12-bit ADC and two 12-bit DAC channels according to the family datasheet. Communication capabilities include I2C, SPI, UART, and IrDA interfaces, allowing the MCU to connect sensors, displays, data converters, and industrial peripherals while reducing external component count. A programmable multi-level interrupt system supports responsive event handling.

Typical uses include industrial sensor modules, compact control panels, low-power data-acquisition nodes, communication bridges, and compact embedded control systems. The 32-VQFN exposed-pad package supports compact layouts but requires careful PCB thermal design and exposed-pad soldering. The 1.6 V to 3.6 V operating range is appropriate for regulated 3.3 V systems and lower-voltage designs where applicable.

For PCB implementation, connect the exposed pad to the ground plane and follow the manufacturer land-pattern and reflow recommendations. Provide the required decoupling capacitors close to the supply pins, keep high-current return paths compact, and route sensitive analog signals away from switching nodes. The operating voltage must remain within 1.6 V to 3.6 V.

This product page combines manufacturer specifications, package details, lifecycle information, sourcing guidance, and design-focused comparisons. It also distinguishes exact-ordering-code alternatives from package or memory variants that cannot be treated as drop-in replacements.

חלופות תחליף ישיר עבור ATXMEGA16E5-MNR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

ATXMEGA16E5-M4NR

✅ Drop-In
📦 32-VQFN (5 mm x 5 mm) with exposed pad
Flash is 16 KB versus 16 KB (0% difference) and core speed is 32 MHz versus 32 MHz (0% difference); confirm the suffix-specific grade and ordering attributes

📋 חלופה להתייחסות (לא בקטלוג)

ATXMEGA16E5-M4UR

✅ Drop-In
📦 32-VQFN (5 mm x 5 mm) with exposed pad
Flash is 16 KB versus 16 KB (0% difference) and core speed is 32 MHz versus 32 MHz (0% difference); the identified ordering code specifies tape-and-reel packaging

📋 חלופה להתייחסות (לא בקטלוג)

ATXMEGA16E5-MNR דירוגים מרביים ומאפיינים חשמליים

Product Type 8/16-bit AVR XMEGA E5 microcontroller
תדר שעון מקסימלי 32 MHz
Flash Memory 16 KB (8K x 16)
Boot Flash Section 4 KB
SRAM 2 KB
EEPROM 512 bytes
Operating Voltage Range 1.6 V to 3.6 V
מארז 32-VQFN (5 mm x 5 mm) with exposed pad
סוג הרכבה Surface mount
ADC 8-channel, 12-bit
DAC 2-channel, 12-bit
Event System 8 channels
Serial Interfaces I2C, SPI, UART, IrDA
Programming In-system programming
Flash Read-While-Write Supported
סטטוס RoHS Compliant

מדריך תצורת פינים של ATXMEGA16E5-MNR 32-vqfn (5 mm x 5 mm) with exposed pad

תצורת פינים עבור ATXMEGA16E5-MNR (מארזת 32-vqfn (5 mm x 5 mm) with exposed pad). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 32-vqfn (5 mm x 5 mm) with exposed pad עבור ATXMEGA16E5-MNR

אין נתוני פריסת פינים מפורטים עבור ATXMEGA16E5-MNR.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ATXMEGA16E5-MNR מתאים עבור 6 יישוםs: Industrial Sensor Node, Low-Power Data Acquisition, Communication Bridge, Compact Control Panel, Battery-Powered Embedded Device, Precision Signal Generator.

🏭

Industrial Sensor Node

The ATXMEGA16E5-MNR fits compact industrial sensor nodes that must acquire analog measurements and communicate through a short serial link. Its eight-channel 12-bit ADC supports multiple sensor inputs, while the 32 MHz AVR core provides enough performance for filtering, calibration, and protocol handling. The 16 KB flash and 2 KB SRAM suit firmware that includes conversion routines and a configurable communications stack. A 1.6 V to 3.6 V operating range integrates cleanly with regulated sensor-node rails. Keep analog traces away from digital switching paths and follow the exposed-pad land pattern to maintain reliable thermal performance.

📡

Low-Power Data Acquisition

The ATXMEGA16E5-MNR is suitable for low-power data-acquisition modules that periodically sample sensors and transmit compact measurements. Its eight-channel 12-bit ADC reduces the need for external analog converters, and the event system can coordinate timer-driven sampling and peripheral events without continuous processor polling. The 2 KB SRAM supports temporary sample buffering, while 16 KB of flash accommodates firmware and calibration parameters. Sleep-mode behavior and clock selection should be configured around the acquisition interval. Place input filtering close to the MCU and provide the manufacturer-recommended supply decoupling to keep analog measurements repeatable.

🌐

Communication Bridge

The ATXMEGA16E5-MNR can act as a compact communication bridge between sensors, actuators, and a host controller. Its I2C, SPI, UART, and IrDA interfaces allow the same firmware architecture to support several short-range and wired links, while the 32 MHz core handles framing and protocol conversion. The 8/16-bit AVR enhanced RISC architecture is useful for event-driven control, and the programmable multi-level interrupt system improves responsiveness to incoming traffic. Validate signal levels and timing on every connected interface. Keep serial routing away from the ADC and DAC signals to reduce coupling into measurement channels.

📺

Compact Control Panel

The ATXMEGA16E5-MNR fits compact control panels requiring local sensing, output control, and serial host connectivity. Its two 12-bit DAC channels can generate analog control or test signals, while the eight-channel ADC supports feedback from controls and sensors. The event system helps coordinate timer events, comparator activity, and interrupts for responsive user-interface behavior. Its 2 KB SRAM and 16 KB flash are appropriate for moderate control logic rather than graphics-heavy workloads. Use the exposed ground pad and compact decoupling layout to minimize thermal rise, and confirm all connector and display timing against the selected peripheral configuration.

🔋

Battery-Powered Embedded Device

The ATXMEGA16E5-MNR is appropriate for battery-powered embedded devices that combine low-power operation with useful local processing. The XMEGA E5 family is positioned as a low-power, high-performance 8/16-bit platform, and the event system can reduce the need for continuous CPU polling during intermittent operation. Its integrated ADC, DAC, and multiple serial interfaces can remove several discrete devices from a compact design. Power-budget calculations should include MCU sleep current, active time, load-switch losses, and peripheral leakage. Configure unused interfaces and pins appropriately, then verify startup and brownout behavior across the complete 1.6 V to 3.6 V supply range.

🎛️

Precision Signal Generator

The ATXMEGA16E5-MNR can support compact precision signal-generation and test-control products because it combines two 12-bit DAC channels with an eight-channel 12-bit ADC for loopback measurement. The 32 MHz core can update control routines, and the event system provides a hardware mechanism for synchronizing timers and peripheral events. This arrangement is useful for calibration, stimulus, and feedback-control functions where a larger system would be unnecessary. For high-accuracy analog results, treat the converter performance as dependent on reference, supply, layout, and calibration. Keep the DAC and ADC paths short and follow the datasheet grounding recommendations around the analog supply network.

סיכום מוצרים מומלצים

ATXMEGA16E5-M4NR Same-family microcontroller for comparable sensing nodes בשימוש ב-: Industrial Sensor Node, Low-Power Data Acquisition, Communication Bridge, Compact Control Panel, Battery-Powered Embedded Device, Precision Signal Generator ATXMEGA16E5-M4UR Same-family tape-and-reel ordering option בשימוש ב-: Industrial Sensor Node, Communication Bridge, Compact Control Panel, Battery-Powered Embedded Device, Precision Signal Generator ATXMEGA16E5-ANR Microchip Technology בשימוש ב-: Low-Power Data Acquisition
What are the key specifications of ATXMEGA16E5-MNR that engineers should know?
The ATXMEGA16E5-MNR combines a 32 MHz AVR XMEGA E5 core with 16 KB of flash, 2 KB of SRAM, and 512 bytes of EEPROM in a 32-VQFN package. According to the Microchip ATxmega32E5/16E5/8E5 data sheet DS40002059A, the device also includes an eight-channel event system, an eight-channel 12-bit ADC, two 12-bit DAC channels, and I2C, SPI, UART, and IrDA interfaces. Its specified operating-voltage range is 1.6 V to 3.6 V.
Where can I download the ATXMEGA16E5-MNR datasheet PDF?
The official ATXMEGA16E5-MNR datasheet PDF is available from Microchip Technology at the DS40002059A document link. It covers the ATxmega32E5, ATxmega16E5, and ATxmega8E5 devices, including electrical characteristics, memory organization, peripherals, package information, and recommended application circuits. Use the family document together with the exact ordering information for ATXMEGA16E5-MNR when checking package drawings, pin functions, and programming details.
Where can I find the ATXMEGA16E5-MNR pinout?
The ATXMEGA16E5-MNR pinout is shown in the package and pin-configuration section of the Microchip ATxmega32E5/16E5/8E5 data sheet DS40002059A. The device uses a 32-pin VQFN with a 5 mm by 5 mm exposed pad. Assign PCB nets from the datasheet pin table rather than inferring them from another 32-pin package, because exposed-pad construction and pad geometry must match the manufacturer land pattern.
What is the operating voltage of ATXMEGA16E5-MNR?
The ATXMEGA16E5-MNR operates from 1.6 V to 3.6 V. Mouser's product listing identifies the device as a 1.6 V to 3.6 V microcontroller, and the Microchip family data sheet provides the associated electrical characteristics. A 3.3 V system is therefore within the specified range, but the design must account for regulator tolerance, startup behavior, and the voltage required by attached peripherals.
How much flash memory does ATXMEGA16E5-MNR contain?
The ATXMEGA16E5-MNR contains 16 KB of ISP flash, organized as 8K by 16 bits, plus a separate 4 KB boot-code section. The Microchip ATxmega32E5/16E5/8E5 data sheet DS40002059A also identifies read-while-write capability, allowing application code to continue operating from flash while the boot or application section is updated. Storage planning should include bootloader, application, configuration, and update workspace.
What peripherals are integrated in ATXMEGA16E5-MNR?
The ATXMEGA16E5-MNR integrates an eight-channel event system, an eight-channel 12-bit ADC, two 12-bit DAC channels, and serial interfaces including I2C, SPI, UART, and IrDA. According to the Microchip product page, it also has a programmable multi-level interrupt system. These resources support low-power sensor acquisition, digital control, communications, and signal generation without requiring separate converters or interface ICs.
Can ATXMEGA16E5-MNR be used for low-power embedded control?
Yes, the ATXMEGA16E5-MNR is designed for low-power embedded control while operating at up to 32 MHz. The Microchip family data sheet describes the AVR XMEGA E5 as a low-power, high-performance, peripheral-rich family. The eight-channel event system can route peripheral events directly, reducing CPU polling, while sleep-mode and clock-management choices should be configured to match the application's duty cycle.
ATXMEGA16E5-MNR vs ATXMEGA16E5-M4NR - which one should be selected?
The ATXMEGA16E5-M4NR is the closest same-package ordering-code alternative identified for the ATXMEGA16E5-MNR, with both associated with the 16 KB, 32 MHz XMEGA E5 family. The flash-memory difference is 16 KB versus 16 KB, or 0%, and the core-speed difference is 32 MHz versus 32 MHz, or 0%. Temperature-grade and full ordering details should still be checked in the Microchip ordering information before production release.
Is ATXMEGA16E5-MNR the same as ATXMEGA16E5-M4NR?
They are not identical ordering codes, but ATXMEGA16E5-M4NR is the closest identified same-family, same-package alternative to the ATXMEGA16E5-MNR. Their identified flash size is 16 KB, core speed is 32 MHz, and 32-VQFN package class is unchanged. The suffix differences can encode ordering or grade information, so engineers should confirm the relevant temperature, packing, and qualification attributes before treating either part as a universal substitute.
When should I choose ATXMEGA16E5-MNR over another AVR microcontroller?
Choose the ATXMEGA16E5-MNR when the design benefits from a 32 MHz AVR XMEGA E5 core, 16 KB flash, 2 KB SRAM, integrated 12-bit conversion, and multiple serial peripherals in a compact 32-VQFN package. It is especially useful for compact sensing and control nodes where supporting converters or interface devices would add cost and board area. Choose a larger ATxmega family member only when its additional flash or SRAM is genuinely required.
What is the best drop-in replacement for ATXMEGA16E5-MNR?
The closest identified drop-in candidate is the Microchip ATXMEGA16E5-M4NR because it retains the same 32-VQFN package class, 16 KB flash, 32 MHz core speed, and XMEGA E5 family architecture. Its identified flash-size difference is 0% and its core-speed difference is 0%. Confirm the exact suffix attributes and pin compatibility against the current Microchip ordering information before using it in production.
What can replace ATXMEGA16E5-MNR without changing the PCB?
A PCB-compatible replacement must retain the 32-VQFN footprint, pin assignments, supply range, and essential memory and peripheral resources. The Microchip ATXMEGA16E5-M4NR is the closest identified candidate, while ATXMEGA16E5-M4UR appears in the same-family comparison information with the same 32 MHz core and 32-VQFN format. Validate temperature rating, packing form, lifecycle status, and every peripheral used by the application before substitution.
Where can I buy ATXMEGA16E5-MNR online?
Use the Request a Quote form on this page to request ATXMEGA16E5-MNR pricing, stock confirmation, and current lead time. The Request a Quote workflow is the appropriate channel for an exact-ordering-code quote and avoids relying on a stale unit-price figure. When requesting a quote, identify the required quantity, 32-VQFN exposed-pad package, and whether reel, tray, or another approved shipping format is required.
What is the price of ATXMEGA16E5-MNR?
The current commercial price for ATXMEGA16E5-MNR should be requested through the Request a Quote form on this page. The form can confirm quantity pricing, inventory, and any volume or packaging conditions that apply to the exact MPN. Because pricing changes with quantity, availability, and market conditions, use the quote response for purchasing rather than relying on a historical catalog amount.
What is the lead time and stock status for ATXMEGA16E5-MNR?
Current stock and lead time for ATXMEGA16E5-MNR can be requested through the Request a Quote form on this page. Include your required quantity and target delivery date so the response can reflect the exact ordering code and packaging arrangement. Product availability should be confirmed at order placement rather than inferred from general catalog listings or older inventory records.
Is ATXMEGA16E5-MNR RoHS compliant?
The ATXMEGA16E5-MNR is listed as RoHS compliant in product and assembly information associated with the exact MPN. RoHS compliance concerns restricted substances in the component and its supplied construction, not the absence of environmental requirements from the finished product. For a new assembly, also request the latest declarations and material or halogen-free status through the Request a Quote workflow.

נתוני עזר הנדסיים עבור ATXMEGA16E5-MNR — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the ATXMEGA16E5-MNR when a product needs a compact 32-VQFN controller with 32 MHz processing, 16 KB flash, 2 KB SRAM, integrated 12-bit conversion, and several serial interfaces. It is well suited to sensor nodes, acquisition modules, compact control panels, communication bridges, and low-power products operating from 1.6 V to 3.6 V. ATXMEGA16E5-M4NR is the closest identified drop-in candidate when that ordering code satisfies the required grade and qualification; ATXMEGA16E5-M4UR provides the same core and memory figures with an identified tape-and-reel format. Before substitution, confirm the exact suffix attributes, exposed-pad footprint, operating temperature, qualification, and programming configuration in the Microchip ordering information.

השוואה עם חלופות

פרמטר מוצר זה ATXMEGA16E5-M4NR ATXMEGA16E5-M4UR
Brand Microchip Technology Microchip Technology Microchip Technology
Package 32-VQFN (5 mm x 5 mm) with exposed pad 32-VQFN with exposed pad 32-VQFN with exposed pad
Core Speed 32 MHz 32 MHz 32 MHz
Flash Memory 16 KB 16 KB 16 KB
SRAM 2 KB 2 KB 2 KB
EEPROM 512 bytes 512 bytes 512 bytes
Core Architecture AVR 8/16-bit AVR 8/16-bit AVR 8/16-bit
Serial Interfaces I2C, SPI, UART, IrDA I2C, SPI, UART, IrDA I2C, SPI, UART, IrDA

מבדילים עיקריים

  • Integration of multiple mixed-signal and communications resources (לעומתATXMEGA16E5-M4NR)
  • Compact exposed-pad land pattern for space-constrained products (לעומתATXMEGA16E5-M4UR)
  • Event-driven control without external coordination logic (לעומתATXMEGA16E5-M4NR)

הערות תכנון

The 32-VQFN package includes an exposed thermal pad that must be soldered and connected to the ground plane. Place thermal vias beneath the pad only when they do not compromise the manufacturer land pattern or assembly process. Estimated: with the package power dissipation P and the effective board-to-ambient thermal resistance theta_total, the approximate junction rise is T_J - T_A = P x theta_total. Evaluate that rise against the device temperature limit because the exposed pad is essential to sustained performance.

Place the required input and output capacitors immediately beside their associated power pins, using the shortest possible current-loop path. Route the exposed-pad ground connection to a low-impedance ground plane and avoid splitting that plane beneath the device. Confirm the pad dimensions, solder-mask clearance, and paste pattern against the Microchip package drawing. A copied footprint from a generic VQFN-32 library may be dimensionally incorrect.

Separate analog inputs and DAC outputs from fast digital and serial signals when the board area permits. Use a continuous ground reference, keep ADC traces compact, and place any input filtering near the source or MCU according to the required settling time. For communication interfaces, check input thresholds and output levels at the 1.6 V to 3.6 V supply extremes. The integrated converters and event system are useful, but layout still determines practical analog performance.

Do not treat every ATxmega16E5 ordering code as interchangeable. A change from ATXMEGA16E5-MNR to ATXMEGA16E5-M4NR or ATXMEGA16E5-M4UR may preserve the 16 KB flash, 32 MHz speed, and 32-VQFN package while changing suffix-specific attributes such as grade, qualification, or shipping format. Review the Microchip ordering table, temperature requirements, programming setup, and assembly format before releasing a replacement into production.

Design the supply network for both low-voltage operation and transient load current. The ATXMEGA16E5-MNR supports a 1.6 V to 3.6 V range, but the chosen regulator must maintain the required voltage at the MCU and connected peripherals across temperature and load. Check the minimum operating voltage during startup, validate brownout behavior, and keep converter switching loops compact. Low headline supply voltage does not remove the need for local bypass capacitance and stable reference routing.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

RoHS compliance is listed for the exact MPN. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation through the Request a Quote workflow.

הנתונים אומתו בתאריך: 2026-11-16 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ATXMEGA16E5-MNR datasheet ATXMEGA16E5-MNR pinout ATXMEGA16E5-MNR datasheet pdf ATXMEGA16E5-MNR replacement ATXMEGA16E5-MNR equivalent ATXMEGA16E5-MNR vs ATXMEGA16E5-M4NR ATXMEGA16E5-MNR VQFN-32 footprint ATXMEGA16E5-MNR 32MHz specifications ATXMEGA16E5-MNR price ATXMEGA16E5-MNR stock Microchip ATXMEGA16E5-MNR ATXMEGA16E5-MNR low power design

רכיבים ומונחים קשורים

Microchip Technology ATXMEGA16E5-MNR ATXMEGA16E5-M4NR ATXMEGA16E5-M4UR ATxmega16E5 AVR XMEGA E5 8/16-bit microcontroller AVR enhanced RISC architecture embedded microcontroller programmable controller semiconductor 32 MHz 16 KB flash memory 2 KB SRAM 512-byte EEPROM eight-channel event system eight-channel 12-bit ADC two-channel 12-bit DAC I2C SPI UART IrDA 32-VQFN QFN package family surface mount SMD RoHS
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר