ATXMEGA32A4-MH - 32MHz AVR Microcontroller | Microchip Technology
部品番号: ATXMEGA32A4-MH ✓ 生産中ATXMEGA32A4-MH 概要
An 8/16-bit AVR microcontroller is a compact embedded-processing component within the microcontroller, semiconductor, and embedded-systems hierarchy. The ATXMEGA family combines a Harvard-style RISC core, memory, timers, communication peripherals, and general-purpose I/O in one package. Compared with larger 32-bit microcontrollers, it provides a focused platform for real-time control, data acquisition, human-interface equipment, and low-power embedded products where 32 KB Flash is sufficient and deterministic peripheral operation is valuable.
The principal features of the ATXMEGA32A4 include a 32 MHz maximum clock, 32 KB Flash organized as 16K x 16, 4 KB SRAM, 1 KB EEPROM, and 34 I/O ports. Peripherals include a four-channel DMA controller, an eight-channel event system, and an external bus interface. The 44-VQFN package provides a compact surface-mount solution for space-constrained PCB layouts, although its fine pitch requires careful assembly and land-pattern design.
At the architectural level, the AVR enhanced RISC core executes instructions in a single clock cycle and can approach 1 MIPS per MHz. The DMA controller can transfer data without occupying the CPU for each peripheral transaction, while the event system routes peripheral signals between timer, comparator, and communication resources. This combination supports responsive control loops and coordinated sampling in industrial, communication, and consumer equipment.
Typical uses include industrial monitoring, building-control interfaces, sensor hubs, programmable logic controllers, data loggers, and compact communication equipment. The combination of 34 I/O ports, four DMA channels, and an event system is particularly useful when multiple timers, counters, or serial peripherals must operate in a coordinated manner. A system requiring more Flash, SRAM, or peripherals may require a larger ATxmega model rather than this 32 KB A4 device.
Designers should verify the exact pin functions, alternate-function mappings, clock requirements, and power behavior against the manufacturer datasheet before layout release. The 44-VQFN footprint requires a conservative solder mask and paste pattern, and unused pins must be connected according to the device guidance. Supply-voltage requirements should also be checked against the specific clock, peripheral, and operating-temperature conditions used by the product.
This page consolidates verified distributor inventory, manufacturer feature information, package details, commercial pricing, application guidance, and design considerations. It also distinguishes genuine same-footprint alternatives from related devices that use different packages or materially different memory configurations, helping engineers avoid a replacement that cannot be soldered onto the existing PCB.
ドロップイン代替品: ATXMEGA32A4-MH — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATXMEGA32A4-MH （同一形状・フットプリント） — 相違点: Core Architecture, EEPROM, Flash Memory, Package, SRAM.
ATXMEGA32D4-MH
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ATXMEGA64D4-MH
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ATXMEGA128D4-MH
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATXMEGA32A4-MH 最大定格＆電気的特性
| Product Type | 8/16-bit AVR XMEGA A4 microcontroller |
| 最大クロック周波数 | 32 MHz |
| Flash Memory | 32 KB (16K x 16) |
| Boot Code Section | 4 KB |
| SRAM | 4 KB |
| EEPROM | 1 KB |
| DMA Channels | 4 channels |
| Event System Channels | 8 channels |
| External Bus Interface | Available |
| I/O Ports | 34 ports |
| Supply Voltage Range | 1.6 V to 3.6 V |
| Distributor Supply Voltage Listing | 2.7 V to 3.6 V |
| パッケージ | 44-VQFN (7 x 7 mm) |
| 実装タイプ | Surface mount |
| Core Architecture | AVR enhanced RISC |
| Instruction Throughput | Approximately 1 MIPS per MHz |
ATXMEGA32A4-MH 44-vqfn (7 x 7 mm) ピン配置ガイド
ATXMEGA32A4-MH (44-vqfn (7 x 7 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATXMEGA32A4-MH.
詳細は データシート をご参照ください。
主な用途
ATXMEGA32A4-MH の用途: 6 件s: Industrial Sensor Hub, Programmable Logic Controller, Communication Interface Module, Battery-Powered Data Logger, Building Control Panel, Audio Control Interface.
Industrial Sensor Hub
The ATXMEGA32A4-MH fits an industrial sensor hub because it combines 34 I/O ports, 32 KB Flash, 4 KB SRAM, and a four-channel DMA controller in a compact 44-VQFN package. A practical design can use DMA to move sampled data from serial or analog peripherals while the CPU handles filtering and communication. Its 1.6 V to 3.6 V listed operating range also supports low-voltage sensor architectures, although the 2.7 V to 3.6 V distributor listing must be checked against the exact clock and peripheral conditions. The main benefit is hardware coordination without requiring a larger processor.
おすすめ
Programmable Logic Controller
The ATXMEGA32A4-MH suits compact PLC and industrial-control modules because its eight-channel event system can connect timer, comparator, and peripheral events while four DMA channels support concurrent data movement. The 32 MHz AVR core and 32 KB Flash provide deterministic execution for relay, counter, and sequencing logic, while 34 I/O ports reduce the need for external I/O expansion. In a controller, the event system can trigger deterministic actions without polling every peripheral. Confirm pin multiplexing and timing margins against the manufacturer datasheet.
おすすめ
Communication Interface Module
The ATXMEGA32A4-MH can serve as the control processor in a compact communication interface because it combines 32 KB Flash, 4 KB SRAM, an event system, DMA, and an external bus interface. The external bus can support shared peripheral access, while DMA reduces processor involvement during serial data movement. Its 44-VQFN 7 x 7 mm footprint preserves board area in gateways, concentrators, and protocol converters. Designers should budget flash for protocol stacks and verify the exact peripheral set assigned to the package pins before schematic capture.
おすすめ
Battery-Powered Data Logger
The ATXMEGA32A4-MH is appropriate for a battery-powered data logger when its low-voltage 1.6 V to 3.6 V operating listing, 32 MHz processing capability, and DMA controller provide a strong balance of performance and resource efficiency. Four DMA channels can transfer buffered sensor data while the CPU performs timestamp processing and low-duty-cycle control. Four KB SRAM supports local packet assembly, and 1 KB EEPROM can retain configuration data. Because verified sleep and active-current figures were not provided, battery sizing must use measured or manufacturer-documented current values.
おすすめ
Building Control Panel
The ATXMEGA32A4-MH fits a building-control panel because 34 I/O ports can support digital inputs, relays, indicators, and keypad or display signals while the event system manages timing across channels. Its 32 KB Flash accommodates control logic and configuration, while the compact 44-VQFN package supports space-limited wall controllers. A DMA-enabled design can move data among serial peripherals and memory with less CPU intervention. The operating-voltage requirements must be aligned with the panel's 3.3 V rail, and unused package pins must follow the manufacturer guidance.
おすすめ
Audio Control Interface
The ATXMEGA32A4-MH can support a compact audio-control interface where gain, routing, status, and user commands must be coordinated without a high-end application processor. Its 32 KB Flash can hold configuration and control firmware, 4 KB SRAM can buffer control data, and the event system can synchronize timers or comparator events. The 44-VQFN footprint also minimizes board area in portable equipment. Audio performance is not defined by the microcontroller itself, so low-noise regulators, clock planning, and careful grounding remain essential to the final analog performance.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATXMEGA32A4-MH — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATXMEGA32D4-MH | ATXMEGA64D4-MH | ATXMEGA128D4-MH |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-VQFN (7 x 7 mm) | 44-VQFN (MH package designation) | 44-VQFN (MH package designation) | 44-VQFN (MH package designation) |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 32 KB | 32 KB | 64 KB | 128 KB |
主な差別化要因
- Closest candidate retains the same stated Flash capacity （vs ATXMEGA32D4-MH)
- Substantially smaller memory footprint than higher-capacity alternatives （vs ATXMEGA64D4-MH)
- Compact 44-VQFN implementation with a defined peripheral mix （vs ATXMEGA128D4-MH)
- Documented event and DMA resources （vs ATXMEGA32D4-MH)
設計ノート
Use the manufacturer's 44-VQFN land pattern rather than deriving it from nominal package dimensions. Place input and bulk-decoupling capacitors close to their associated supply pins, provide a low-impedance ground path, and avoid placing fast or switching nodes beneath the device. The verified package is 7 x 7 mm, but its fine-pitch land geometry, mask openings, paste volume, and exposed-pad requirements must be taken from the official package drawing.
Resolve the voltage-range discrepancy before fixing the power architecture. Mouser lists 1.6 V to 3.6 V for ATXMEGA32A4-MH, while Digichip lists 2.7 V to 3.6 V. Check the manufacturer datasheet for clock-frequency, peripheral, and temperature constraints, then ensure the regulator has adequate transient response for the selected 32 MHz operating condition. The verified data does not supply active or sleep-current figures, so battery and thermal estimates require additional documentation.
Do not treat a matching VQFN outline or the MH package designation as proof that ATXMEGA32A4-MH and a D4 alternative are automatically interchangeable. Verify every used pin, alternate function, power pin, reset connection, clock source, interrupt vector, peripheral inventory, and programming interface against both datasheets. A firmware rebuild may also be necessary if register maps, interrupt behavior, or peripheral features differ.
Assign XMEGA peripheral functions early because multiplexing can constrain available I/O and board-level signal routing. Separate sensitive analog or sensor inputs from switching nodes and high-current outputs, use short ground returns, and reserve clean filtering and decoupling locations. For communication interfaces, validate external-bus timing and signal integrity against the configured clock rather than assuming the nominal 32 MHz rate applies to every peripheral.
コンプライアンス情報
The verified web data confirms an active lifecycle listing for ATXMEGA32A4-MH but does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown rather than being inferred from general Microchip product practices.
