Broadcom

BCM8728BIFBG - Dual 10GbE SFI-to-XAUI PHY | Broadcom

部品番号: BCM8728BIFBG ✗ 生産終了
MOQ: 1 |

BCM8728BIFBG 概要

Broadcom BCM8728BIFBG is a dual-channel 10GbE SFI-to-XAUI LAN/WAN physical-layer transceiver with electronic decision-making capability. The device bridges two 10-gigabit Ethernet serial interfaces to an XAUI parallel interface, providing a physical-layer function for high-speed network equipment. It is categorized as an integrated communications interface IC and is intended for applications where 10GbE copper links must connect to an XAUI-capable Ethernet controller or switching silicon.

A physical-layer transceiver is the semiconductor block that converts a high-speed serial data stream into a parallel digital interface and handles the electrical signaling required at the device boundary. Within the broader hierarchy, this component is a transceiver IC, then a network interface IC, then an integrated circuit used in networking and telecommunications equipment. The BCM8728BIFBG also supports LAN and WAN equipment architectures where low-latency Ethernet links are required.

The principal documented characteristics are its dual-channel architecture, 10GbE operation, SFI input interface, and XAUI output interface. Electronic decision-making capability, identified in the device description, supports signal-handling functions within the physical layer. These features distinguish the BCM8728BIFBG as a dedicated high-speed Ethernet interface rather than a general-purpose serial transceiver or a complete Ethernet controller.

The SFI-to-XAUI conversion architecture places the BCM8728BIFBG between optical or copper-facing SFI sources and an XAUI interface on a network processor, Ethernet switch, or router. Operating two channels in one device can simplify multiport designs where parallel 10GbE links are required. The XAUI interface provides a parallel high-speed connection to digital switching logic, while SFI provides the serial-facing connection used by 10GbE physical-layer implementations.

Typical use cases include 10GbE switches, routers, line cards, aggregation equipment, WAN appliances, and network interface cards. It is particularly relevant where two 10GbE channels must be exposed to an XAUI-capable host processor. Design selection also requires confirming the host XAUI electrical interface, board-level channel requirements, thermal conditions, and the reference design associated with the exact Broadcom device variant.

The primary engineering consideration is that SFI and XAUI are not interchangeable interfaces. PCB routing must preserve the signal integrity required by each side of the device, including controlled-impedance XAUI traces and appropriately terminated SFI connections. Designers should follow the Broadcom reference design and layout guidance for the exact package and board revision rather than infer dimensions or pin assignments from the ordering code.

This product record combines the available manufacturer and distributor technical identification with practical interface, layout, and sourcing guidance. It highlights where the BCM8728BIFBG fits in a 10GbE design, distinguishes its documented SFI-to-XAUI function from complete Ethernet controllers, and provides a structured basis for comparing future drop-in options when verified package-level and pin-level cross-reference data becomes available.

ドロップイン代替品: BCM8728BIFBG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

BCM8728BIFBG 最大定格&電気的特性

Product Type Dual-channel 10GbE SFI-to-XAUI LAN/WAN physical-layer transceiver
Channel Count 2 channels
データレート 10 Gb/s per channel
Serial Input Interface SFI
Parallel Output Interface XAUI
Network Role LAN/WAN physical-layer transceiver
Signal-Decision Feature EDC electronic decision-making capability
Semiconductor Category Integrated circuit
Interface Category Telecom interface IC

BCM8728BIFBG standard ピン配置ガイド

BCM8728BIFBG (standard パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

BCM8728BIFBG の standard パッケージピン配置図

詳細なピン配置データはありません: BCM8728BIFBG.

詳細は データシート をご参照ください。

主な用途

BCM8728BIFBG の用途: 6 件s: 10GbE Enterprise Switches, 10GbE Router Interfaces, WAN Edge Appliances, Network Line Cards, Traffic Aggregation Platforms, Network Interface Cards.

🌐

10GbE Enterprise Switches

The BCM8728BIFBG fits enterprise switching platforms that need two 10GbE SFI-facing links connected to an XAUI-capable switching ASIC. Its dual-channel architecture can reduce the number of physical-layer transceiver devices needed on a multiport line card. The design must preserve SFI and XAUI signal integrity, provide the required reference and supplies, and follow the Broadcom reference layout. Review the exact electrical limits and thermal data before production release because the available component record does not establish package-level operating limits.

🌐

10GbE Router Interfaces

The BCM8728BIFBG is appropriate for router and aggregation interfaces where two serial 10GbE links must interface to an XAUI network processor. It separates the physical-layer signaling function from packet processing performed by the host processor. This division allows the router architecture to reuse a high-speed parallel host interface while facing external links through SFI. Validate clocking, reference-design topology, board channel loss, and implementation timing against the manufacturer documentation before integrating the device.

🏭

WAN Edge Appliances

The BCM8728BIFBG can support LAN/WAN edge appliances requiring a dedicated dual-channel 10GbE physical-layer interface. Its SFI-to-XAUI conversion supports designs that terminate high-speed serial links into an XAUI-capable ASIC rather than implementing the physical layer in the host device. This is useful for edge aggregation, branch routing, and traffic-inspection systems. Deployment still depends on exact operating-temperature, supply-voltage, lifecycle, and compliance requirements being confirmed for the target enclosure and industry.

🖥️

Network Line Cards

A multiport 10GbE line card can use the BCM8728BIFBG where each card needs paired 10GbE physical-layer channels linked to an XAUI switching or packet-processing ASIC. The integrated dual-channel arrangement helps maintain a consistent high-speed interface architecture across the card. Designers should budget connector reach, optical or copper module requirements, channel skew, and thermal paths when planning the board. Exact pin assignments and package land patterns must come from the Broadcom package drawing rather than be inferred from the MPN.

🖥️

Traffic Aggregation Platforms

Traffic aggregation platforms benefit from the BCM8728BIFBG when the backplane or uplink architecture uses two 10GbE serial links and an XAUI host connection. The device provides the physical-layer bridge between those interface domains, allowing the aggregation ASIC to handle packet processing. Board implementation should preserve controlled-impedance XAUI routing and provide clean SFI connections to the appropriate module or backplane transceiver. Compliance and environmental requirements should be assessed separately for the complete system.

🖥️

Network Interface Cards

The BCM8728BIFBG is suitable for a dedicated dual-port 10GbE network interface card built around an XAUI-capable controller. Each channel provides a serial 10GbE SFI-side connection while the controller handles higher-level communication and traffic processing. This arrangement can simplify high-throughput server, storage, and test systems requiring deterministic Ethernet links. Confirm host-controller timing, power sequencing, thermal performance, connector configuration, and the manufacturer's board guidance before fabricating production hardware.

What is the BCM8728BIFBG?
The BCM8728BIFBG is a Broadcom dual-channel 10GbE SFI-to-XAUI LAN/WAN physical-layer transceiver with electronic decision-making capability. It converts two 10-gigabit serial SFI channels into XAUI-facing parallel interfaces for compatible Ethernet controllers, switches, routers, and network line cards. Broadcom describes it as a 10GBE dual SFI-to-XAUI PHY.
What are the key specifications of BCM8728BIFBG engineers should know?
The BCM8728BIFBG provides two 10GbE channels, SFI serial connectivity, and XAUI parallel connectivity in one LAN/WAN physical-layer transceiver. Its electronic decision-making capability is identified in the Broadcom product description. Engineers should also verify package dimensions, pin assignments, supply requirements, and temperature limits against the exact datasheet before laying out a board.
Where can I download the BCM8728BIFBG datasheet PDF?
The BCM8728BIFBG datasheet should be obtained from Broadcom's product documentation or the document-access links associated with an authorized component listing. The linked Broadcom product record identifies the device as a dual-channel 10GbE SFI-to-XAUI PHY. Before implementation, verify the revision, package drawing, pin table, electrical limits, and reference design in the manufacturer datasheet.
Where can I find the BCM8728BIFBG pinout?
The BCM8728BIFBG pinout must be taken from the pin-description table and package drawing in the Broadcom datasheet for the exact ordering code. Do not infer connections from the BIFBG suffix, because the ordering code does not by itself establish every power, ground, reference-clock, SFI, and XAUI signal assignment. The package dimensions and exposed pad requirements must also be checked from that drawing.
How does the BCM8728BIFBG compare with a complete Ethernet controller?
The BCM8728BIFBG is a physical-layer transceiver, not a complete Ethernet controller. It provides the 10GbE SFI-to-XAUI interface and electronic decision-making function, while packet processing, host interfaces, forwarding, and Ethernet MAC control remain outside this device's stated role. A system using it therefore needs an XAUI-capable host controller or switching ASIC.
What applications are suitable for the BCM8728BIFBG?
The BCM8728BIFBG is suitable for 10GbE switches, routers, WAN appliances, aggregation platforms, line cards, and network interface equipment requiring two serial 10GbE channels connected to an XAUI host. Its dual-channel SFI-to-XAUI architecture can simplify parallel 10GbE link designs. Interface timing, thermal performance, and PCB signal integrity should be validated in the target system.
Can the BCM8728BIFBG be used in industrial networking equipment?
The BCM8728BIFBG can be considered for industrial networking equipment only after its electrical, temperature, lifecycle, and qualification ratings are confirmed for the intended environment. Its core function is a 10GbE SFI-to-XAUI physical-layer link. Industrial suitability depends on complete datasheet limits and any applicable certification, not on the LAN/WAN interface description alone.
Where can I buy the BCM8728BIFBG online?
Use the Request a Quote form on this page to request the BCM8728BIFBG and confirm current sourcing, lot traceability, and required packaging. The form is the appropriate channel for obtaining a current commercial quotation and lead time without relying on a potentially stale listing. Specify the exact MPN BCM8728BIFBG in the request.
What is the price of the BCM8728BIFBG?
A current price for the BCM8728BIFBG is available through the Request a Quote form on this page. Quote requests should specify the exact BCM8728BIFBG ordering code, required quantity, target packaging, and delivery location. This allows the commercial offer to reflect current supply conditions without publishing a static price that may no longer be valid.
What is the lead time for the BCM8728BIFBG?
The current lead time for BCM8728BIFBG should be confirmed through the Request a Quote form on this page. Include the required quantity, date code, packaging preference, and shipment destination in the request. The component's communication function does not establish current manufacturing allocation, inventory position, or replenishment timing.
Is the BCM8728BIFBG in stock?
Current BCM8728BIFBG stock should be confirmed through the Request a Quote form on this page. Submit the exact MPN, quantity, packaging, and required ship-to location so the response reflects current procurement status. Because this product uses a quote-based commercial flow, a listing page alone should not be treated as confirmation of allocable inventory.
What is the best drop-in replacement for BCM8728BIFBG?
No drop-in replacement for the BCM8728BIFBG can be confirmed from the current cross-reference information because it does not identify a candidate with the same package and verified pin assignments. A valid substitute must match the SFI and XAUI interfaces, channel count, voltage requirements, timing, thermal limits, and board footprint. Do not approve a replacement from a functional description alone.
Can another Broadcom 10GbE transceiver replace the BCM8728BIFBG?
Another Broadcom 10GbE transceiver should not be treated as a drop-in replacement without a verified package and pin-to-pin comparison. Functional similarity, such as supporting 10GbE and XAUI, does not prove that reference-clock, supply, EDC, control, and signal assignments match. Request the manufacturer comparison or inspect both datasheets before changing an approved BOM.
When should I choose the BCM8728BIFBG over another 10GbE interface device?
Choose the BCM8728BIFBG when the design specifically requires two 10GbE SFI channels terminating into XAUI on a compatible host ASIC and the Broadcom electrical and reference-design requirements can be met. If a candidate lacks dual-channel SFI-to-XAUI operation, matching voltage levels, or the required footprint, it is not a substitute even if its headline data rate is also 10GbE.
Is a Broadcom BCM8728 equivalent to the BCM8728BIFBG?
A BCM8728-family device is not automatically equivalent to BCM8728BIFBG. The full ordering code identifies a specific manufacturer variant, and compatibility depends on its package, pinout, electrical ratings, EDC configuration, and intended application. Compare the exact suffix, package drawing, and datasheet revision rather than substituting a shortened family name.

エンジニアリング参考データ: BCM8728BIFBG — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the BCM8728BIFBG when the system specifically requires a Broadcom dual-channel 10GbE SFI-to-XAUI physical-layer interface and an XAUI-capable host ASIC or controller. Its paired-channel architecture is suited to switches, routers, WAN appliances, line cards, aggregation platforms, and network interface cards. The device should not be selected solely because another candidate supports 10GbE: SFI versus XAUI role, EDC behavior, supply rails, reference clocking, package dimensions, and pin assignments must all match. No drop-in alternative is recommended until a candidate's package drawing and pin table have been compared directly with the BCM8728BIFBG. For new designs, use the manufacturer reference schematic and layout, verify operating-temperature and lifecycle requirements, and complete board-level SI and thermal validation before committing the BOM.

代替品との比較

パラメータ この製品
Brand Broadcom
Channel Count 2 channels
Data Rate 10 Gb/s per channel
Serial Interface SFI
Parallel Interface XAUI
Network Role LAN/WAN physical-layer transceiver
EDC Capability Electronic decision-making capability

設計ノート

Treat the SFI and XAUI interfaces as separate high-speed design domains. Route XAUI as controlled-impedance, length-matched traces on the stack-up specified by the Broadcom reference design, and follow its launch and termination requirements. Place SFI connection and decoupling structures close to the relevant pins. Confirm the exact package and pin names in the manufacturer pin-description table before assigning any board net.

Use the package land pattern, pin-one orientation, exposed-pad geometry, and solder-mask requirements from the datasheet drawing. Do not derive the footprint from the BIFBG ordering suffix. Review via-in-pad or thermal-via recommendations, solder-mask clearance, and copper keepouts against the package drawing, especially if the package contains a thermal pad that must connect to a ground plane.

Separate supply rails and sensitive signal connections according to the reference schematic, and place required bypass capacitors at the package-side power pins. Estimate total rail dissipation only after the exact voltage and current conditions are established from the datasheet. Use the calculated dissipation and the package thermal model to determine whether additional copper, airflow, or thermal relief is necessary.

Do not treat the BCM8728BIFBG as a full 10GbE MAC, switch, or packet processor; it is a dual SFI-to-XAUI physical-layer transceiver. Avoid selecting a replacement solely because it also supports 10GbE. A true drop-in decision requires identical package geometry, pin-to-pin assignments, supply rails, timing behavior, reference-clock requirements, EDC configuration, and thermal constraints.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance attributes are not stated in the Broadcom product identification and should be confirmed from the exact manufacturer documentation or declarations before procurement.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

BCM8728BIFBG datasheet BCM8728BIFBG pinout BCM8728BIFBG datasheet pdf Broadcom BCM8728BIFBG BCM8728BIFBG equivalent BCM8728BIFBG replacement BCM8728BIFBG cross reference BCM8728BIFBG package BCM8728BIFBG price BCM8728BIFBG stock BCM8728BIFBG 10GbE SFI XAUI BCM8728BIFBG 10GbE switch interface

関連部品&用語

Broadcom BCM8728BIFBG BCM8728 10GbE SFI XAUI physical-layer transceiver PHY network interface IC LAN WAN EDC electronic decision-making Ethernet switch router interface network line card traffic aggregation network interface card 10GbE switch serial interface parallel interface
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示