ROHM Semiconductor

BD3823FV-ME2 - Low-Noise Audio I/O Interface IC | ROHM

部品番号: BD3823FV-ME2 ✗ 生産終了
7 V to 14.5 V Vdss
MOQ: 1 |

BD3823FV-ME2 概要

The ROHM BD3823FV-ME2 is a low-noise audio I/O interface integrated circuit designed for NTSC/PAL audio signal processing in recording and DVD-recorder equipment. The device provides a five-channel selector with a resistor-ladder-type volume function, low output noise of 3.2 uVrms, and low distortion of 0.0015%. Its wide power-supply operating range of 7 V to 14.5 V supports systems with input signals up to 4.5 Vrms while maintaining high signal-to-noise performance.

An audio I/O interface IC is a functional block within the broader signal-chain hierarchy of audio analog and mixed-signal electronics. It routes and conditions multiple audio channels, provides level control, and helps establish a controlled path between source circuitry and downstream recording or playback stages. In a DVD recorder, such an interface can reduce the number of discrete switching, attenuation, and routing elements required around analog audio paths.

The BD3823FV-ME2 combines channel selection with integrated resistor-ladder volume control. Its 3.2 uVrms noise specification is particularly important in low-level audio paths because excess circuit noise can raise the system noise floor and reduce the usable dynamic range of recordings. The 0.0015% distortion specification also indicates that signal-level conditioning can be maintained with low added harmonic error.

The 7 V to 14.5 V supply range gives the circuit flexibility across 12 V-class analog equipment while requiring correct bypass and grounding. Its architecture is centered on audio signal selection and attenuation rather than high-speed digital conversion. Consequently, board design should prioritize short analog traces, clean grounding, stable supply bypassing, and control of unwanted coupling from switching regulators and digital circuitry.

Typical applications include DVD-recorder analog audio routing, NTSC/PAL recording equipment, multi-channel audio selection, and low-noise analog volume-control stages. The five-channel selector is useful where several source paths must be directed through a common output stage, while the integrated ladder reduces external passive volume-control requirements.

Designers should verify the complete pin assignment and exposed-terminal requirements against the manufacturer datasheet before layout release. Decoupling should be placed close to the supply pins, analog ground returns should remain low impedance, and unused inputs should be handled according to the datasheet. The 7 V minimum supply must be respected during startup, and input amplitude should remain within the stated 4.5 Vrms capability.

This page consolidates the documented architecture, key electrical performance, packaging information, sourcing path, and engineering considerations for engineers evaluating the BD3823FV-ME2 in legacy NTSC/PAL recording and audio-routing designs.

ドロップイン代替品: BD3823FV-ME2 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

BD3823FV-ME2 仕様

Product Type Audio I/O interface IC
Manufacturer ROHM Semiconductor
Nominal MPN BD3823FV-ME2
機能 NTSC-PAL audio I/O interface for recording
Channel Selector 5 channels
Volume Control Resistor-ladder type
出力ノイズ 3.2 uVrms
Distortion 0.0015%
Power Supply Voltage Range 7 V to 14.5 V
Maximum Input Voltage 4.5 Vrms
Signal Standard Support NTSC and PAL
Signal-to-Noise Performance High S/N support

BD3823FV-ME2 standard ピン配置ガイド

BD3823FV-ME2 (standard パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

BD3823FV-ME2 の standard パッケージピン配置図

詳細なピン配置データはありません: BD3823FV-ME2.

詳細は データシート をご参照ください。

主な用途

BD3823FV-ME2 の用途: 6 件s: DVD Recorder Audio Routing, NTSC/PAL Recording Equipment, Five-Channel Audio Selector, Low-Noise Analog Volume Control, Analog Audio Conditioning, Legacy Audio System Repair.

🎧

DVD Recorder Audio Routing

The BD3823FV-ME2 is suited to DVD-recorder analog audio routing because the manufacturer identifies it as an NTSC-PAL audio I/O interface for recording. Its five-channel selector can direct multiple source paths through a common output, while the resistor-ladder-type volume function provides integrated attenuation. The 3.2 uVrms noise and 0.0015% distortion specifications help preserve low-level content when the circuit operates from a 7 V to 14.5 V supply. The original board topology, control levels, and package pinout must still be matched during any repair or redesign.

🎥

NTSC/PAL Recording Equipment

Legacy NTSC and PAL recording systems benefit from the BD3823FV-ME2 because it is explicitly designed for those audio signal standards and provides five-channel selection with integrated volume control. The 7 V to 14.5 V operating range is compatible with conventional 12 V-class analog circuitry. A system designer should verify channel order, control polarity, signal amplitude, and grounding against the manufacturer application circuit. Its low 3.2 uVrms output noise is valuable when maintaining an analog recording path with limited dynamic range.

🔧

Five-Channel Audio Selector

The integrated five-channel selector makes the BD3823FV-ME2 applicable where several analog audio sources must share a controlled output path. The resistor-ladder-type volume function simplifies implementation compared with a design that requires a separate ladder or switched attenuator. Its 0.0015% distortion specification supports accurate signal conditioning, while 3.2 uVrms noise limits the interface's contribution to low-level audio noise. Pin-compatible implementation should not be assumed for generic selectors because control logic and analog pin functions must be compared.

🎚️

Low-Noise Analog Volume Control

The BD3823FV-ME2 can serve as a low-noise analog volume-control stage in equipment that does not require digital conversion. Its resistor-ladder architecture integrates attenuation with audio routing, while the 3.2 uVrms noise specification helps maintain a low system noise floor. The 4.5 Vrms input capability and 0.0015% distortion figure should be checked against the source and downstream load. Board implementation must use short signal paths, effective bypassing, and a quiet analog ground reference.

📻

Analog Audio Conditioning

BD3823FV-ME2 can be used within analog audio-conditioning blocks that require channel routing and level adjustment before amplification or recording circuitry. Its five-channel selector supports signal-path management, while integrated ladder attenuation avoids additional discrete networks. The specified 3.2 uVrms noise is important for conditioning weak signals without raising the effective input-referred noise floor. Designers should evaluate source impedance, allowable signal amplitude, control timing, and the complete datasheet pin description before finalizing the circuit.

🛠️

Legacy Audio System Repair

BD3823FV-ME2 is relevant to repair and continuation projects involving older NTSC/PAL recording electronics. Replacing the original interface preserves its five-channel routing, resistor-ladder volume behavior, low-noise operation, and 0.0015% distortion characteristics instead of introducing an unverified generic switch. The safest restoration approach is to reproduce the manufacturer application circuit, including supply bypassing and grounding. Because the exact package pinout and lifecycle status are not confirmed on this page, engineers should review the manufacturer documentation before fabrication or assembly.

What is the BD3823FV-ME2 used for?
The BD3823FV-ME2 is an audio I/O interface integrated circuit for NTSC-PAL recording equipment, including DVD recorders. It combines a five-channel selector with a resistor-ladder-type volume function. According to the manufacturer datasheet, the device is designed for low-noise audio routing, with output noise of 3.2 uVrms and distortion of 0.0015%. It is intended for legacy analog audio systems rather than modern digital audio codec designs.
What are the key specifications of BD3823FV-ME2 that engineers should know?
The BD3823FV-ME2 combines five-channel audio selection, resistor-ladder volume control, 3.2 uVrms output noise, and 0.0015% distortion. The manufacturer datasheet specifies a 7 V to 14.5 V power-supply range and input capability up to 4.5 Vrms. Its primary architecture is an analog NTSC/PAL audio interface for recording equipment. The package designation, pin count, temperature range, and lifecycle classification require confirmation from the complete manufacturer documentation.
What is the supply voltage range of BD3823FV-ME2?
The BD3823FV-ME2 operates from 7 V to 14.5 V according to the manufacturer datasheet. This range makes it suitable for conventional analog recording equipment using a nominal 12 V supply architecture. The power rails must remain inside the stated limits during startup and normal operation. Decoupling capacitors should be positioned close to the supply and ground pins to control supply-impedance effects on the low-noise audio path.
What is the output noise of BD3823FV-ME2?
The BD3823FV-ME2 has a specified output noise of 3.2 uVrms according to the manufacturer datasheet. This low-noise figure is useful when the device is used near the input stage of a recording system, where additional circuit noise can affect the overall signal-to-noise ratio. Actual system noise also depends on supply bypassing, grounding, source impedance, trace layout, and the selected input channel, so the IC specification should not be treated as a complete noise budget.
What is the difference between BD3823FV-ME2 and BD3808FS-E2?
The BD3823FV-ME2 is a five-channel NTSC-PAL audio I/O interface with integrated resistor-ladder volume control, while the BD3808FS-E2 is a different ROHM audio device. The comparison result does not establish that their pinouts, package drawings, channel counts, voltage ranges, or control functions are identical. They should therefore not be considered interchangeable without a direct manufacturer pin-function comparison and a demonstration that the board footprint, signal levels, and supply requirements remain unchanged.
When should I choose BD3823FV-ME2 instead of a modern audio codec?
Choose the BD3823FV-ME2 when maintaining an NTSC/PAL analog recording design that specifically requires five-channel selection, resistor-ladder volume control, and a 3.2 uVrms low-noise interface. A modern audio codec is preferable for new designs that need digital conversion, digital routing, multi-format clocking, or software-controlled functions. The legacy interface offers analog routing convenience but does not provide the digital conversion and control architecture expected from a current mixed-signal codec.
Is BD3823FV-ME2 suitable for DVD recorder audio boards?
Yes, the BD3823FV-ME2 is explicitly described by the manufacturer datasheet as an audio I/O interface for recording applications, including DVD recorders. Its five-channel selector, low 3.2 uVrms output noise, and 0.0015% distortion are appropriate for analog audio routing in those systems. Suitability still depends on matching the original circuit's supply voltage, signal amplitudes, control logic, and exact pin assignment.
Where can I download the BD3823FV-ME2 datasheet PDF?
The manufacturer datasheet PDF is available at the ROHM datasheet link shown on this page. It is the primary document for verifying the block diagram, electrical characteristics, pin description, and application information. The PDF is titled for the BD3823FV family, while BD3823FV-ME2 is the ordered package suffix. Always confirm that the ordering code, package drawing, and suffix-specific electrical limits match the assembled device.
Where can I find the BD3823FV-ME2 pinout?
The BD3823FV-ME2 pinout should be taken from the pin-description table in the manufacturer datasheet, which is linked on this page. The exact package drawing and pin count are not established by the available product listing, so this page does not reproduce individual pin assignments. Before routing a PCB, verify every power, ground, audio input, output, and control connection against the package drawing and application circuit in the manufacturer documentation.
What can replace BD3823FV-ME2?
No verified pin-to-pin drop-in replacement for the BD3823FV-ME2 is identified on this page. A valid replacement must match the exact package, pin functions, five-channel selector behavior, resistor-ladder volume interface, 7 V to 14.5 V supply range, noise performance, distortion, and control logic. A part with similar audio functionality is not a drop-in replacement unless those requirements are demonstrated. Use the Request a Quote form when sourcing the original ordered MPN or seeking engineering review of a candidate substitute.
Is BD3823FV-ME2 the same as a generic five-channel audio switch?
No, the BD3823FV-ME2 is not merely a generic five-channel switch. It integrates audio channel selection with a resistor-ladder-type volume function and is specified for 3.2 uVrms output noise and 0.0015% distortion. A generic switch may provide routing but can differ in attenuation range, signal handling, control polarity, distortion, noise, and pin layout. Direct substitution therefore requires full functional and pin-level verification.
Where to buy BD3823FV-ME2 online?
Use the Request a Quote form on this page to request BD3823FV-ME2 availability, current lead time, and order handling. The product is associated with ROHM Semiconductor, and the manufacturer datasheet link on this page supports technical evaluation. Quote requests should include the exact suffix BD3823FV-ME2, the required package or tape-and-reel configuration, target quantities, and the production date needed by the receiving system.
What is the price of BD3823FV-ME2?
The current price for BD3823FV-ME2 should be requested through the Request a Quote form on this page. Pricing can change with quantity, package configuration, market conditions, and order timing, so a static figure would not reliably represent current availability. Submit the exact MPN, target annual and prototype quantities, and required delivery location to receive current commercial terms.
What is the lead time for BD3823FV-ME2?
The current lead time for BD3823FV-ME2 should be confirmed through the Request a Quote form on this page. Lead time depends on available factory inventory, the requested quantity, package configuration, and whether the order is for prototypes or production. Include your required delivery date and factory scheduling needs so the commercial response can reflect the actual procurement plan.
Is BD3823FV-ME2 in stock?
Current stock for BD3823FV-ME2 should be checked by submitting the Request a Quote form on this page. Because this product is associated with an older NTSC/PAL recording-device architecture, supply status may vary by quantity and package configuration. A quote response can confirm current availability, scheduled delivery, and any minimum-order or traceability requirements needed for the design.
What is the best ROHM equivalent for BD3823FV-ME2?
No verified ROHM drop-in equivalent for the BD3823FV-ME2 is established on this page. The device is a specialized five-channel NTSC-PAL audio I/O interface with resistor-ladder volume control, so a related audio selector may still differ in pinout, control polarity, supply range, attenuation behavior, or signal specifications. A valid equivalent must preserve the exact footprint and pin functions, with quantitative noise, distortion, and signal-range comparisons completed before substitution.
How should a BD3823FV-ME2 circuit be laid out for low noise?
Place supply-bypass capacitors close to the device's supply and ground pins, keep analog signal routes short, and maintain a low-impedance return path before the system ground reference. The 3.2 uVrms noise specification is a device-level figure and does not remove board-generated noise or coupling. Review the manufacturer application circuit for grounding and termination details, and keep switching-regulator and digital return currents away from sensitive audio inputs to minimize common-impedance and radiated coupling effects.

エンジニアリング参考データ: BD3823FV-ME2 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the BD3823FV-ME2 when maintaining or reproducing an NTSC/PAL recording design that depends on five-channel analog selection and integrated resistor-ladder volume control. Its 3.2 uVrms output noise, 0.0015% distortion, 7 V to 14.5 V supply range, and 4.5 Vrms input capability are the principal criteria to compare with the original circuit. A modern audio codec is the better direction for new mixed-signal products because it adds digital conversion and programmable control, but it is not a PCB drop-in replacement. Generic five-channel selectors should be considered only after their attenuation behavior, control polarity, signal range, noise, distortion, package, and pin functions are verified. For production continuity, request the exact ordered MPN through the quote form and confirm lifecycle status, package configuration, and delivery requirements.

設計ノート

Place the supply-bypass network close to the BD3823FV-ME2 power and ground connections, following the manufacturer application circuit. The 3.2 uVrms output-noise specification assumes a controlled electrical environment; long supply loops and shared return paths can degrade total system noise. Keep analog signal routes short and avoid routing them alongside switching-node traces.

Use the manufacturer pin-description table and application schematic when assigning PCB traces because the exact package drawing is not established on this page. Confirm the five selector channels, ladder-control connections, supply pins, and ground connections before fabrication. A functionally similar audio IC cannot be treated as pin-compatible without matching every physical and functional connection.

Respect the 7 V to 14.5 V supply range and the stated input capability of 4.5 Vrms. Keep source impedance and channel loading within the device's specified operating conditions, and evaluate attenuation behavior with the intended source and load. The 0.0015% distortion specification should be assessed with representative signal levels rather than inferred across every operating condition.

Do not substitute a generic five-channel selector solely from its channel count. The BD3823FV-ME2 also incorporates resistor-ladder volume control, and its control polarity, attenuation range, pin functions, supply behavior, noise, and distortion may differ from alternatives. Confirm the exact ordered suffix, package, pinout, and lifecycle status before committing a replacement to production.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The available product and datasheet information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The device is an analog audio interface rather than an automotive-qualified component.

データ検証日: 2026-11-11 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

BD3823FV-ME2 datasheet BD3823FV-ME2 datasheet pdf BD3823FV-ME2 pinout BD3823FV-ME2 specifications BD3823FV-ME2 equivalent BD3823FV-ME2 replacement BD3823FV-ME2 cross reference BD3823FV-ME2 price BD3823FV-ME2 stock ROHM BD3823FV-ME2 BD3823FV-ME2 audio interface BD3823FV-ME2 application circuit

関連部品&用語

ROHM Semiconductor BD3823FV-ME2 BD3823FV BD3808FS-E2 audio I/O interface audio interface IC NTSC PAL DVD recorder five-channel selector resistor-ladder volume control 3.2 uVrms output noise 0.0015% distortion 7 V to 14.5 V power supply 4.5 Vrms input analog audio routing recording equipment signal-to-noise ratio RoHS REACH surface-mount integrated circuit audio signal processing
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示