BD3823FV-ME2 - Low-Noise Audio I/O Interface IC | ROHM
MPN: BD3823FV-ME2 ✗ Cuối đờiBD3823FV-ME2 Tóm tắt
An audio I/O interface IC is a functional block within the broader signal-chain hierarchy of audio analog and mixed-signal electronics. It routes and conditions multiple audio channels, provides level control, and helps establish a controlled path between source circuitry and downstream recording or playback stages. In a DVD recorder, such an interface can reduce the number of discrete switching, attenuation, and routing elements required around analog audio paths.
The BD3823FV-ME2 combines channel selection with integrated resistor-ladder volume control. Its 3.2 uVrms noise specification is particularly important in low-level audio paths because excess circuit noise can raise the system noise floor and reduce the usable dynamic range of recordings. The 0.0015% distortion specification also indicates that signal-level conditioning can be maintained with low added harmonic error.
The 7 V to 14.5 V supply range gives the circuit flexibility across 12 V-class analog equipment while requiring correct bypass and grounding. Its architecture is centered on audio signal selection and attenuation rather than high-speed digital conversion. Consequently, board design should prioritize short analog traces, clean grounding, stable supply bypassing, and control of unwanted coupling from switching regulators and digital circuitry.
Typical applications include DVD-recorder analog audio routing, NTSC/PAL recording equipment, multi-channel audio selection, and low-noise analog volume-control stages. The five-channel selector is useful where several source paths must be directed through a common output stage, while the integrated ladder reduces external passive volume-control requirements.
Designers should verify the complete pin assignment and exposed-terminal requirements against the manufacturer datasheet before layout release. Decoupling should be placed close to the supply pins, analog ground returns should remain low impedance, and unused inputs should be handled according to the datasheet. The 7 V minimum supply must be respected during startup, and input amplitude should remain within the stated 4.5 Vrms capability.
This page consolidates the documented architecture, key electrical performance, packaging information, sourcing path, and engineering considerations for engineers evaluating the BD3823FV-ME2 in legacy NTSC/PAL recording and audio-routing designs.
Bộ thay thế dễ dàng lắp đặt cho BD3823FV-ME2 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếBD3823FV-ME2 Thông số kỹ thuật
| Product Type | Audio I/O interface IC |
| Manufacturer | ROHM Semiconductor |
| Nominal MPN | BD3823FV-ME2 |
| Chức năng | NTSC-PAL audio I/O interface for recording |
| Channel Selector | 5 channels |
| Volume Control | Resistor-ladder type |
| Tiếng ồn đầu ra | 3.2 uVrms |
| Distortion | 0.0015% |
| Power Supply Voltage Range | 7 V to 14.5 V |
| Maximum Input Voltage | 4.5 Vrms |
| Signal Standard Support | NTSC and PAL |
| Signal-to-Noise Performance | High S/N support |
Hướng dẫn cấu hình chân BD3823FV-ME2 standard
Cấu hình chân cho BD3823FV-ME2 (standard gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho BD3823FV-ME2.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
BD3823FV-ME2 phù hợp cho 6 Áp dụngs: DVD Recorder Audio Routing, NTSC/PAL Recording Equipment, Five-Channel Audio Selector, Low-Noise Analog Volume Control, Analog Audio Conditioning, Legacy Audio System Repair.
DVD Recorder Audio Routing
The BD3823FV-ME2 is suited to DVD-recorder analog audio routing because the manufacturer identifies it as an NTSC-PAL audio I/O interface for recording. Its five-channel selector can direct multiple source paths through a common output, while the resistor-ladder-type volume function provides integrated attenuation. The 3.2 uVrms noise and 0.0015% distortion specifications help preserve low-level content when the circuit operates from a 7 V to 14.5 V supply. The original board topology, control levels, and package pinout must still be matched during any repair or redesign.
Được đề xuất
NTSC/PAL Recording Equipment
Legacy NTSC and PAL recording systems benefit from the BD3823FV-ME2 because it is explicitly designed for those audio signal standards and provides five-channel selection with integrated volume control. The 7 V to 14.5 V operating range is compatible with conventional 12 V-class analog circuitry. A system designer should verify channel order, control polarity, signal amplitude, and grounding against the manufacturer application circuit. Its low 3.2 uVrms output noise is valuable when maintaining an analog recording path with limited dynamic range.
Được đề xuất
Five-Channel Audio Selector
The integrated five-channel selector makes the BD3823FV-ME2 applicable where several analog audio sources must share a controlled output path. The resistor-ladder-type volume function simplifies implementation compared with a design that requires a separate ladder or switched attenuator. Its 0.0015% distortion specification supports accurate signal conditioning, while 3.2 uVrms noise limits the interface's contribution to low-level audio noise. Pin-compatible implementation should not be assumed for generic selectors because control logic and analog pin functions must be compared.
Được đề xuất
Low-Noise Analog Volume Control
The BD3823FV-ME2 can serve as a low-noise analog volume-control stage in equipment that does not require digital conversion. Its resistor-ladder architecture integrates attenuation with audio routing, while the 3.2 uVrms noise specification helps maintain a low system noise floor. The 4.5 Vrms input capability and 0.0015% distortion figure should be checked against the source and downstream load. Board implementation must use short signal paths, effective bypassing, and a quiet analog ground reference.
Được đề xuất
Analog Audio Conditioning
BD3823FV-ME2 can be used within analog audio-conditioning blocks that require channel routing and level adjustment before amplification or recording circuitry. Its five-channel selector supports signal-path management, while integrated ladder attenuation avoids additional discrete networks. The specified 3.2 uVrms noise is important for conditioning weak signals without raising the effective input-referred noise floor. Designers should evaluate source impedance, allowable signal amplitude, control timing, and the complete datasheet pin description before finalizing the circuit.
Được đề xuất
Legacy Audio System Repair
BD3823FV-ME2 is relevant to repair and continuation projects involving older NTSC/PAL recording electronics. Replacing the original interface preserves its five-channel routing, resistor-ladder volume behavior, low-noise operation, and 0.0015% distortion characteristics instead of introducing an unverified generic switch. The safest restoration approach is to reproduce the manufacturer application circuit, including supply bypassing and grounding. Because the exact package pinout and lifecycle status are not confirmed on this page, engineers should review the manufacturer documentation before fabrication or assembly.
Được đề xuất
Dữ liệu tham khảo kỹ thuật cho BD3823FV-ME2 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
Ghi chú thiết kế
Place the supply-bypass network close to the BD3823FV-ME2 power and ground connections, following the manufacturer application circuit. The 3.2 uVrms output-noise specification assumes a controlled electrical environment; long supply loops and shared return paths can degrade total system noise. Keep analog signal routes short and avoid routing them alongside switching-node traces.
Use the manufacturer pin-description table and application schematic when assigning PCB traces because the exact package drawing is not established on this page. Confirm the five selector channels, ladder-control connections, supply pins, and ground connections before fabrication. A functionally similar audio IC cannot be treated as pin-compatible without matching every physical and functional connection.
Respect the 7 V to 14.5 V supply range and the stated input capability of 4.5 Vrms. Keep source impedance and channel loading within the device's specified operating conditions, and evaluate attenuation behavior with the intended source and load. The 0.0015% distortion specification should be assessed with representative signal levels rather than inferred across every operating condition.
Do not substitute a generic five-channel selector solely from its channel count. The BD3823FV-ME2 also incorporates resistor-ladder volume control, and its control polarity, attenuation range, pin functions, supply behavior, noise, and distortion may differ from alternatives. Confirm the exact ordered suffix, package, pinout, and lifecycle status before committing a replacement to production.
Thông tin tuân thủ
The available product and datasheet information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The device is an analog audio interface rather than an automotive-qualified component.