C8051F020-GQ - 25MHz 64KB Flash MCU | Silicon Labs
部品番号: C8051F020-GQ ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $44.956 | $44.96 |
| 10 | $44.956 | $449.56 |
| 100 | $44.956 | $4,495.60 |
| 500 | $44.956 | $22,478.00 |
| 1,000 | $44.956 | $44,956.00 |
C8051F020-GQ 概要
A microcontroller is a programmable semiconductor device that integrates a CPU, memory, and peripherals into one device. The C8051F02x family belongs to the 8051 microcontroller hierarchy and is designed for embedded control and data-acquisition systems. The C8051F020-GQ can provide 64 digital I/O pins or 32 digital I/O pins according to its configuration, while its mixed-signal peripherals allow analog measurement and control functions to share one device.
Key verified features include a 25 MHz operating frequency, 64 KB flash, and an on-chip ADC identified by distributor listings. Retrieved family data also reports two 16-bit SAR ADCs, 16-bit resolution, programmable throughput up to 1 Msps, and operation as two single-ended or one differential converter. An on-chip VDD monitor, watchdog timer, and clock oscillator reduce the amount of external support circuitry required.
The device belongs to the C8051F02x mixed-signal MCU family and is positioned for industrial embedded-control, instrumentation, and data-acquisition designs. Its flash memory supports firmware storage, while the high-pin-count TQFP package exposes substantial digital and analog connectivity. The package is appropriate for conventional multilayer PCB assembly rather than a compact BGA or QFN redesign.
Typical use cases include sensor acquisition, process monitoring, digital control, communications, and compact embedded instruments. The verified family description highlights two SAR ADC channels and DMA support, allowing sampled data to be transferred into RAM without requiring each byte to be handled directly by software.
A critical design requirement is to verify the complete 100-pin assignment, exposed analog functions, supply limits, oscillator options, and peripheral multiplexing against the manufacturer datasheet before layout. The 100-pin package needs adequate routing space, and analog signal paths require careful grounding and decoupling to preserve measurement quality.
This page consolidates verified distributor listings, manufacturer product information, package details, and practical replacement guidance. It distinguishes confirmed data from fields that still require schematic- and datasheet-level confirmation, helping engineers evaluate procurement and migration without confusing a similar MCU with a true drop-in replacement.
ドロップイン代替品: C8051F020-GQ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストC8051F020-GQ 最大定格＆電気的特性
| Product Type | 8-bit mixed-signal microcontroller |
| 最大クロック周波数 | 25 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| Digital I/O Configuration | 64 pins or 32 pins |
| ADC Architecture | Two 16-bit SAR ADCs |
| ADC Resolution | 16 bits |
| ADC INL | ±0.75 LSB |
| ADC Missing Codes | Guaranteed none |
| ADC Maximum Programmable Throughput | 1 Msps |
| ADC Differential Mode | Two single-ended converters or one differential converter |
| Direct Memory Access | Data stored in RAM without software intervention |
| On-Chip VDD Monitor | Integrated |
| Watchdog Timer | Integrated |
| Clock Oscillator | Integrated |
| パッケージ | 100-pin TQFP, 14 x 14 mm |
| 実装タイプ | Surface mount |
| Core Family | 8051 / C8051F02x |
C8051F020-GQ 100-pin tqfp, 14 x 14 mm ピン配置ガイド
C8051F020-GQ (100-pin tqfp, 14 x 14 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: C8051F020-GQ.
詳細は データシート をご参照ください。
主な用途
C8051F020-GQ の用途: 6 件s: Industrial Sensor Acquisition, Process Monitoring and Control, Data Logging Instrument, Precision Measurement Front End, Communication Gateway Controller, High-Resolution Analog Control.
Industrial Sensor Acquisition
The C8051F020-GQ fits industrial sensor-acquisition systems that need two 16-bit SAR ADCs, a 25 MHz clock, and 64 KB of firmware storage. Its converters can operate as two single-ended channels or one differential channel, with programmable throughput reaching 1 Msps. Place each sensor interface near the appropriate analog pins and keep switching circuitry away from high-impedance inputs. The differential mode can reduce common-mode pickup when the sensor and converter share a suitable reference arrangement, although actual accuracy still depends on resistor matching, reference quality, grounding, and calibration. The 100-pin TQFP package provides more routing flexibility than a compact low-pin-count MCU but requires careful fanout and multilayer layout planning.
おすすめ
Process Monitoring and Control
The C8051F020-GQ supports process-monitoring equipment where pressure, temperature, level, or current signals must be sampled and acted upon locally. A 25 MHz 8-bit core provides control-loop execution, while 64 KB flash holds application firmware and the two SAR ADC blocks support concurrent measurement channels. The device can run at up to 1 Msps when acquisition speed is important, but control software must still account for filtering latency, sensor settling time, and actuator timing. A robust implementation should isolate analog grounds appropriately, use a stable reference, and calibrate offset and gain during commissioning rather than assuming ±0.75 LSB INL converts directly into field accuracy.
おすすめ
Data Logging Instrument
The C8051F020-GQ is appropriate for compact data-logging instruments that sample analog inputs, store results, and expose status through embedded serial or digital interfaces. Direct memory access can move sampled data into RAM without software intervention for every transfer, which reduces processor burden during acquisition. The 64 KB flash capacity provides a substantial firmware image for buffering, calibration, file formatting, and communications. Designers should partition RAM carefully because the supplied snippets do not state usable RAM capacity, and should verify the complete memory map in the manufacturer datasheet. Watchdog support is useful for unattended instruments, while the integrated VDD monitor can assist power-state supervision.
おすすめ
Precision Measurement Front End
The two 16-bit SAR ADCs, ±0.75 LSB INL, and guaranteed no-missing-codes specification make C8051F020-GQ a candidate for measurement front ends requiring deterministic conversion behavior. Differential operation can support a sensor whose output is centered around a common-mode voltage, while dual single-ended operation accommodates separate channels. The verified data does not define input impedance, acquisition time, reference voltage, or total unadjusted error, so those values must be obtained before setting sample rate or accuracy targets. PCB implementation should use short analog traces, a quiet reference plane, symmetrical channel routing, and local bypass capacitors to reduce corruption between the sensor and converter.
おすすめ
Communication Gateway Controller
C8051F020-GQ can serve as the local controller in a communications gateway that gathers analog or digital inputs and manages protocol-handling firmware. Its 64 KB flash capacity supports more elaborate gateway code than many basic 8-bit MCUs, while the integrated watchdog and VDD monitor improve recovery and supervision behavior. The 100-pin package supplies a broad interface budget for serial links, status signals, and external control. Firmware migration to another member of the C8051 family must still check peripheral mapping, memory organization, oscillator behavior, and package pins. The verified snippets do not enumerate UART, SPI, CAN, or other communications specifications, so those interfaces require datasheet confirmation.
おすすめ
High-Resolution Analog Control
The C8051F020-GQ is suitable for control systems that combine analog feedback with a fast 8-bit decision loop. Its programmable SAR converter throughput of up to 1 Msps provides acquisition headroom, while the 25 MHz CPU supports more frequent control updates than many lower-clock microcontrollers. The 64 KB flash permits onboard tables, compensation coefficients, state machines, and diagnostics. In a power-control implementation, keep the analog input path away from switching nodes and validate settling before each sample. Because duty cycle, voltage ratings, temperature range, and package thermal limits are absent from the supplied verified data, engineers must consult the official datasheet before setting limits for production hardware.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: C8051F020-GQ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Manufacturer | Silicon Labs |
| Package | 100-pin TQFP, 14 x 14 mm |
| Maximum Clock Frequency | 25 MHz |
| CPU Architecture | 8-bit 8051 / C8051F02x |
| Flash Memory | 64 KB |
| ADC Configuration | Two 16-bit SAR ADCs |
| ADC Throughput | Up to 1 Msps |
| Verified Price as of 2026-10-21 | $44.9560 |
主な差別化要因
- High-resolution mixed-signal conversion （vs Generic 8-bit MCU without the verified C8051F02x ADC specification)
- Substantial integrated program storage （vs Lower-memory 8-bit microcontroller)
- High peripheral connectivity （vs Compact low-pin-count microcontroller)
設計ノート
Design the board around the complete 100-pin TQFP footprint rather than a reduced-pitch approximation. Confirm every pin assignment against the official C8051F020 package drawing before fanout. Keep analog inputs short, match routing between channels where possible, and place input protection so leakage and capacitance do not degrade acquisition performance. The verified snippets do not include pin names, so pad assignment must not be inferred from family conventions.
Separate sensitive analog routing from clocks, relays, power-converter switching nodes, and high-current returns. Use a stable reference for the SAR converters, place bypass components near their associated supply pins, and provide a low-impedance ground path. The verified family data specifies ±0.75 LSB INL and guaranteed no missing codes, but those converter figures do not remove errors introduced by reference noise, routing, sensor impedance, or calibration.
Do not treat another C8051-family part as interchangeable merely because it has a similar clock, memory size, or high-pin-count package. Confirm pinout, ADC topology, memory organization, peripheral mapping, oscillator options, supply constraints, and software assumptions. The available cross-reference results did not establish a pin-to-pin replacement for C8051F020-GQ, so changing MPNs without manufacturer confirmation can cause both hardware and firmware failures.
コンプライアンス情報
The verified manufacturer and distributor snippets do not provide current RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.
