Silicon Labs

C8051F369-GM - 50MHz 8-bit MCU with ADC/DAC | Silicon Labs

部品番号: C8051F369-GM ✓ 生産中
2.7V to 3.6V Vdss 28-QFN, 5x5 mm, exposed pad Package 50 MHz Speed 16 KB flash, 16K x 8 organization Memory
MOQ: 1 |

C8051F369-GM 概要

Silicon Labs C8051F369-GM is an 8-bit C8051F36x mixed-signal flash microcontroller operating at up to 50MHz, with 16KB of flash program memory, 1KB of RAM, integrated 10-bit ADC and DAC resources, and a 28-QFN 5x5mm surface-mount package. It is designed for compact embedded systems that require deterministic control performance, mixed-signal measurement, and serial connectivity in a small footprint.

A mixed-signal microcontroller such as the C8051F369-GM belongs to the embedded-control hierarchy that includes MCU, microprocessor, mixed-signal IC, and semiconductor. Its 8051-compatible core combines flash-based program storage with on-chip analog peripherals, allowing a design to measure or generate analog signals while executing control software locally. The 28-QFN package also includes an exposed pad for improved thermal transfer on a PCB.

Key specifications include a 50MHz maximum clock, 16KB flash memory, 1KB RAM, a 2.7V to 3.6V supply range, and an operating temperature range of -40C to 85C. The device is identified as an 8-bit microcontroller in the C8051F36x series, with an internal oscillator and flash program memory. Integrated conversion features include a 10-bit ADC rated for up to 200ksps in the relevant family configurations and a 10-bit DAC.

The architecture supports mixed-signal acquisition and output alongside serial interfaces including SMBus or I2C, SPI, and UART/USART. This combination is useful when a controller must supervise sensors, control actuators, communicate with a host processor, and perform local calculations. The C8051F36x family is associated with Silicon Labs in-system-programmable flash MCU products, allowing firmware development and production programming workflows.

Typical applications include industrial sensor nodes, building automation modules, motor and power-control boards, compact data-acquisition units, consumer accessories, and embedded communication equipment. The 50MHz operating speed provides useful headroom for protocol handling and control-loop execution, while the 16KB flash and 1KB RAM keep the device appropriate for focused rather than general-purpose embedded workloads.

When laying out a board, reserve the exposed pad and provide adequate copper for heat dissipation. Keep analog input and reference connections short, use a clean supply path around the analog peripherals, and follow the manufacturer pin-description table when assigning PCB tracks. For replacement decisions, verify the exact package suffix, temperature grade, flash size, peripheral set, and firmware compatibility rather than relying only on the C8051F36x family name.

ドロップイン代替品: C8051F369-GM — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

C8051F369-C-GM

✅ ドロップイン
📦 28-QFN (5x5)
Same 50MHz, 16KB flash, and 1KB RAM configuration in the same 28-QFN package; suffix-specific temperature and ordering details differ

📋 参考代替品(カタログ未掲載)

C8051F369-C-GMR

✅ ドロップイン
📦 28-QFN (5x5)
Same 50MHz, 16KB flash, and 1KB RAM configuration in the same 28-QFN package; GMR identifies a different production packing format

📋 参考代替品(カタログ未掲載)

C8051F367-GM

✅ ドロップイン
📦 28-QFN (5x5)
Same 50MHz C8051F36x family and 28-QFN footprint, with device-specific analog peripheral and pin-function differences

📋 参考代替品(カタログ未掲載)

C8051F367-C-GM

✅ ドロップイン
📦 28-QFN (5x5)
Same 50MHz C8051F36x family and 28-QFN footprint, with suffix-specific ordering details and device-specific peripheral differences

📋 参考代替品(カタログ未掲載)

C8051F367-C-GMR

✅ ドロップイン
📦 28-QFN (5x5)
Same 50MHz C8051F36x family and 28-QFN footprint; differs in packing suffix and device-specific peripheral assignments

📋 参考代替品(カタログ未掲載)

C8051F369-GM 最大定格&電気的特性

Product Type 8-bit mixed-signal flash microcontroller
Core C8051F36x 8051-compatible core
Maximum Clock 50 MHz
データバス幅 8 bit
Program Memory 16 KB flash, 16K x 8 organization
RAM 1 KB, 1K x 8 organization
電源電圧 2.7V to 3.6V
ADC 10-bit, up to 200 ksps
ADC Input Configuration Up to 21 external single-ended or differential inputs
DAC 10-bit
基準電圧 Internal VREF, external pin, or VDD
Serial Interfaces SMBus or I2C, SPI, UART/USART
動作温度 -40C to 85C
パッケージ 28-QFN, 5x5 mm, exposed pad
実装タイプ Surface mount
Oscillator Type Internal

C8051F369-GM 28-qfn, 5x5 mm, exposed pad ピン配置ガイド

C8051F369-GM (28-qfn, 5x5 mm, exposed pad パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

C8051F369-GM の 28-qfn, 5x5 mm, exposed pad パッケージピン配置図

詳細なピン配置データはありません: C8051F369-GM.

詳細は データシート をご参照ください。

主な用途

C8051F369-GM の用途: 6 件s: Industrial Sensor Acquisition, Building Automation Controller, Compact Data-Acquisition Unit, Motor and Power-Control Board, Connected Equipment Module, Consumer Accessory Controller.

🏭

Industrial Sensor Acquisition

The C8051F369-GM fits compact sensor nodes that must acquire analog measurements while managing local control and communications. Its 10-bit ADC supports rates up to 200ksps in applicable family configurations, and the 50MHz core leaves processing headroom for filtering, calibration, and protocol handling. The 16KB flash accommodates focused firmware, while 1KB RAM supports short working buffers. Place the MCU in a 28-QFN 5x5mm footprint with the exposed pad connected to a solid ground plane. For industrial deployments, the -40C to 85C rating is useful, but the final enclosure, sensor accuracy, and supply tolerance must be validated as a complete system.

🧩

Building Automation Controller

The C8051F369-GM is appropriate for small building-automation modules that combine sensor inputs, actuator control, and a low-speed serial network. Its 50MHz 8051-compatible core can execute protocol tasks and control logic, while the 10-bit ADC handles analog environmental or occupancy feedback. The 2.7V to 3.6V supply range fits powered sensor and relay modules. Firmware can use the internal oscillator to reduce external clock-component count. Design the PCB with short analog traces, stable reference routing, and careful separation between digital switching nodes and sensitive measurement inputs. Because the 28-QFN exposed pad needs reliable thermal and ground connectivity, follow the manufacturer land pattern exactly.

📟

Compact Data-Acquisition Unit

The C8051F369-GM supports compact data-acquisition designs that need mixed measurement and embedded control without a separate analog processor. The 10-bit ADC can sample at up to 200ksps in relevant configurations, and the 50MHz core can manage sampling timing, basic filtering, and data transfer. Its 16KB flash and 1KB RAM are best suited to short acquisition buffers and focused algorithms rather than large offline storage. The 10-bit DAC can provide a reference or test output where the application requires it. Use controlled-reference routing and quiet supply return paths to maximize measurement repeatability. The 28-QFN footprint reduces board area while making thermal-pad vias and analog layout quality especially important.

⚡

Motor and Power-Control Board

The C8051F369-GM can serve as the supervisory controller in a compact motor-control or power-sequencing board. At 50MHz, its 8-bit core can execute timing logic, monitor analog feedback, and coordinate communications while external power devices perform the high-energy switching. The 10-bit ADC is useful for current, voltage, or position feedback, and the 10-bit DAC may support control references or test functions. The 16KB flash and 1KB RAM suit focused supervisory code. Keep the MCU away from high-current switching paths, provide local supply bypassing, and route exposed-pad vias into the ground plane. Firmware and hardware must also validate shutdown behavior under fault conditions.

🌐

Connected Equipment Module

The C8051F369-GM fits connected equipment modules that need local control plus UART/USART, SPI, or SMBus/I2C connectivity. The 50MHz core provides sufficient throughput for protocol framing, state management, and periodic data acquisition, while 16KB flash holds a compact application program. Its 28-QFN 5x5mm package preserves board area in small industrial or consumer products. Use separate routing discipline for serial signals and analog inputs, and place bypass capacitance close to supply pins according to the manufacturer guidance. The -40C to 85C operating range supports many deployed environments. Before product release, verify startup timing, bus levels, and firmware behavior with the exact production suffix.

📱

Consumer Accessory Controller

The C8051F369-GM is practical for compact consumer accessories requiring a low-power MCU, local analog control, and serial host communication. Its 2.7V to 3.6V operating range, 50MHz core, and 16KB flash provide enough capability for user-interface state, sensor handling, and accessory control. The 10-bit ADC can monitor simple analog inputs, while the DAC can generate low-level analog signals where required. The small 28-QFN footprint is useful in space-constrained products. Keep the exposed pad tied to the ground network, isolate analog inputs from fast digital edges, and validate standby behavior and startup timing. For safety or regulatory-sensitive functions, add the required fault detection and energy-control measures.

おすすめ製品の概要

C8051F369-C-GM Same microcontroller family with an alternate order suffix 使用用途: Industrial Sensor Acquisition, Compact Data-Acquisition Unit, Connected Equipment Module C8051F367-GM Closely related C8051F36x mixed-signal MCU 使用用途: Industrial Sensor Acquisition, Motor and Power-Control Board, Consumer Accessory Controller C8051F369-C-GMR Same 28-QFN device with a different production packing option 使用用途: Building Automation Controller, Motor and Power-Control Board, Consumer Accessory Controller C8051F367-C-GM Related family member for parallel hardware assessment 使用用途: Building Automation Controller, Connected Equipment Module C8051F367-C-GMR Related 28-QFN family member for feature comparison 使用用途: Compact Data-Acquisition Unit
What is the operating voltage of C8051F369-GM?
The C8051F369-GM operates from a 2.7V to 3.6V supply. According to the Silicon Labs product specifications, this operating range is suitable for low-voltage embedded systems using 3V-class rails. The MCU also includes analog conversion peripherals, so the supply should be decoupled close to the device and checked against the manufacturer’s recommended power network.
How much flash and RAM does the C8051F369-GM have?
The C8051F369-GM contains 16KB of flash program memory and 1KB of RAM. Its flash is organized as 16K x 8, while RAM is organized as 1K x 8. According to Silicon Labs listings, this memory combination suits compact control firmware rather than applications requiring large buffers, extensive logging, or heavyweight graphical processing.
What clock speed does the C8051F369-GM use?
The C8051F369-GM supports a maximum clock frequency of 50MHz. According to the manufacturer’s device specifications, this 8-bit C8051F36x controller provides substantially more instruction throughput than a conventional low-speed 8051 design. The available clock headroom is useful for mixed-signal sampling routines, serial protocol handling, and deterministic control tasks.
Does the C8051F369-GM include ADC and DAC peripherals?
Yes, the C8051F369-GM includes 10-bit ADC and 10-bit DAC resources. According to the Silicon Labs family information, the relevant ADC configurations support rates up to 200ksps and as many as 21 external single-ended or differential inputs. The reference can be selected from the internal reference, an external reference pin, or the device supply.
What package does the C8051F369-GM use?
The C8051F369-GM uses a 28-QFN package measuring 5x5mm with an exposed pad. This is a surface-mount package intended for compact PCB layouts. The exposed pad requires a corresponding land pattern and thermal-via arrangement, so engineers should use the package drawing and land-pattern guidance in the manufacturer datasheet.
Where can I download the C8051F369-GM datasheet PDF?
The C8051F369-GM datasheet PDF is available through the Silicon Labs documentation ecosystem and through the product page linked from this listing. The document is titled C8051F369-GM and describes the C8051F36x mixed-signal flash MCU family. Use the manufacturer’s pin table and electrical characteristics when finalizing the schematic and PCB layout.
Where is the C8051F369-GM pinout located?
The C8051F369-GM pinout is located in the pin-assignment section of the manufacturer datasheet. The device uses 28-QFN construction with an exposed pad, so pin numbering includes the physical QFN leads and requires special attention to the exposed thermal pad. Use that table to map power, ground, analog, debug, and serial functions onto the PCB.
What is the C8051F369-GM suitable for?
The C8051F369-GM is suitable for compact embedded systems that combine control, analog measurement, and serial communications. Its 50MHz core, 16KB flash, 1KB RAM, 10-bit ADC, 10-bit DAC, and 2.7V to 3.6V supply make it appropriate for sensor nodes, automation modules, data-acquisition controllers, and compact equipment-control boards.
Can C8051F367-GM replace C8051F369-GM?
C8051F367-GM is a close member of the C8051F36x family, but replacement should not be approved from the family name alone. According to manufacturer family data, the C8051F369 and C8051F367 parts differ in device-specific resources and pin details. Confirm the exact pin mapping, ADC channels, DAC availability, clock configuration, memory, and firmware requirements before treating it as a drop-in replacement.
What is the best drop-in replacement for C8051F369-GM?
The strongest replacement is an exact C8051F36x device with the same 28-QFN footprint, memory organization, power rating, temperature range, and peripheral assignments. C8051F369-C-GM is the closest identified variant, while C8051F369-C-GMR changes the packing format rather than the core device. Use the Request a Quote form on this page to identify the exact sourceable suffix.
C8051F369-GM vs C8051F369-C-GM: which one should I choose?
Choose C8051F369-GM when its listed grade and packaging configuration meet the product requirements; choose C8051F369-C-GM when that exact suffix is required by the production BOM or qualification plan. Both are identified as 50MHz, 8-bit, 16KB-flash devices in 28-QFN packages. The suffix and temperature-grade details must be confirmed in the manufacturer ordering information.
When should I choose C8051F369-GM over another C8051F3x microcontroller?
Choose C8051F369-GM when the design needs its specific combination of 50MHz operation, 16KB flash, 1KB RAM, 10-bit conversion resources, and 28-QFN packaging. Select another family member when its peripheral set, memory capacity, pin count, or package better matches the board. The deciding factors should be pin compatibility, analog requirements, firmware support, and lifecycle needs.
Is C8051F369-GM suitable for industrial sensor acquisition?
The C8051F369-GM is suitable for compact industrial sensor-acquisition designs that operate from 2.7V to 3.6V and need local analog measurement. Its 10-bit ADC supports up to 200ksps in applicable family configurations, while the 50MHz core can handle control and communication tasks. The -40C to 85C operating range supports many industrial environments, subject to final qualification.
Where can I buy C8051F369-GM online?
Use the Request a Quote form on this page to request C8051F369-GM availability, current lead time, and commercial terms. The form allows engineers to specify the required package suffix, quantity, and production schedule without relying on a static listing. The target device is a 28-QFN, 50MHz C8051F36x MCU with 16KB flash and 1KB RAM.
What is the price and stock status of C8051F369-GM?
Current price, stock, and lead time for C8051F369-GM are handled through the Request a Quote form on this page. The form is the appropriate channel for the exact MPN because inventory and commercial terms can change by suffix, quantity, and production schedule. Specify whether C8051F369-GM, C8051F369-C-GM, or another approved suffix is required.
What are the key specifications of C8051F369-GM that engineers should know?
The C8051F369-GM is an 8-bit C8051F36x mixed-signal flash MCU rated at 50MHz, with 16KB flash, 1KB RAM, a 2.7V to 3.6V supply, 10-bit ADC and DAC resources, and a 28-QFN 5x5mm package. According to manufacturer specifications, the operating range is -40C to 85C. The exposed-pad footprint and exact analog-pin assignment require careful PCB review.
What is the lead time for C8051F369-GM?
The current lead time for C8051F369-GM should be requested through the Request a Quote form on this page. Include the required quantity, target date, exact MPN suffix, and acceptable packaging configuration. Because microcontroller inventory can vary by order code, a lead-time answer should reflect the selected configuration rather than only the base family name.

エンジニアリング参考データ: C8051F369-GM — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose C8051F369-GM when the design specifically requires a 50MHz C8051F36x MCU with 16KB flash, 1KB RAM, 10-bit ADC and DAC resources, and a 28-QFN 5x5mm footprint. Prefer C8051F369-C-GM or C8051F369-C-GMR when that exact order suffix is required, while checking temperature grade and production packing. Consider C8051F367-GM or its C and GMR variants only after comparing the complete pin map, analog channels, DAC configuration, memory, and firmware requirements. Because the alternatives are members of the same family and package family, board reuse may be possible, but it is not guaranteed solely by the shared 28-QFN outline. For a new design, prioritize the exact peripheral set over family-name similarity. For an existing production board, validate reset, debug, analog reference, timer, and serial assignments before approving any substitution.

代替品との比較

パラメータ この製品 C8051F369-C-GM C8051F369-C-GMR C8051F367-GM C8051F367-C-GM C8051F367-C-GMR
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 28-QFN (5x5) 28-QFN (5x5) 28-QFN (5x5) 28-QFN (5x5) 28-QFN (5x5) 28-QFN (5x5)
Core C8051F36x 8051-compatible core C8051F36x 8051-compatible core C8051F36x 8051-compatible core C8051F36x 8051-compatible core C8051F36x 8051-compatible core C8051F36x 8051-compatible core
Maximum Clock 50 MHz 50 MHz 50 MHz 50 MHz 50 MHz 50 MHz
ADC and DAC 10-bit ADC and 10-bit DAC 10-bit ADC and 10-bit DAC 10-bit ADC and 10-bit DAC Device-specific mixed-signal resources Device-specific mixed-signal resources Device-specific mixed-signal resources
Serial Interfaces SMBus or I2C, SPI, UART/USART SMBus or I2C, SPI, UART/USART SMBus or I2C, SPI, UART/USART Device-specific serial interface configuration Device-specific serial interface configuration Device-specific serial interface configuration

主な差別化要因

  • Exact 50MHz configuration with 16KB flash and 1KB RAM (vs C8051F367-GM)
  • Integrated 10-bit DAC alongside the 10-bit ADC (vs C8051F367-GM)
  • Same package family with a broad 2.7V to 3.6V supply range (vs C8051F369-C-GM)
  • Three documented serial interface types (vs C8051F367-C-GM)

設計ノート

Use the manufacturer’s 28-QFN land pattern and expose the thermal pad to the PCB with a recommended via arrangement. Keep the exposed pad tied to the same low-impedance ground network used by the supply pins. A 5x5mm footprint leaves little clearance for improvised routing, so establish the pin escape strategy before placing analog and serial signals.

Route analog inputs and the reference connection away from UART, SPI, and other switching edges. The 10-bit ADC can acquire samples up to 200ksps in applicable family configurations, but sampling rate alone does not ensure accuracy; input settling, source impedance, reference stability, and ground return paths determine practical performance. Follow the recommended bypass and analog-layout guidance in the datasheet.

Do not treat every C8051F36x suffix as electrically identical. Confirm the pin table, ADC channel count, DAC availability, memory configuration, temperature grade, and package suffix before substituting. Firmware built for C8051F369 should be validated against the candidate device’s peripheral map, particularly when moving to a C8051F367 variant.

Keep the 2.7V to 3.6V operating range in mind when designing the power rail, including startup tolerance and regulator accuracy. Place decoupling capacitance close to the supply and ground pins and provide a low-impedance return path for the exposed pad. Analog accuracy can depend on reference and supply behavior, so evaluate the complete rail rather than only its nominal voltage.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for this exact MPN. AEC-Q100 is not applicable to this general-purpose MCU classification.

関連検索

C8051F369-GM datasheet C8051F369-GM pinout C8051F369-GM datasheet pdf C8051F369-GM specifications C8051F369-GM 28-QFN C8051F369-GM equivalent C8051F369-GM replacement C8051F369-GM cross reference C8051F369-GM vs C8051F367-GM C8051F369-GM footprint C8051F369-GM price Silicon Labs C8051F369-GM C8051F369 50MHz ADC DAC C8051F369-GM application circuit

関連部品&用語

Silicon Labs C8051F369-GM C8051F369-C-GM C8051F369-C-GMR C8051F367-GM C8051F367-C-GM C8051F367-C-GMR C8051F36x 8051-compatible core microcontroller mixed-signal MCU flash memory RAM 10-bit ADC 10-bit DAC SMBus I2C SPI UART/USART 28-QFN QFN family surface mount SMD industrial sensor acquisition embedded control
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示