C8051F502-IQ - 50MHz 8-Bit MCU with CAN | Silicon Labs
部品番号: C8051F502-IQ ✓ 生産中C8051F502-IQ 概要
An 8-bit microcontroller is a compact embedded-processing component that combines a CPU, program memory, data memory, peripherals, and communication interfaces on one integrated circuit. The C8051F50x family belongs to the CISC microcontroller hierarchy and is designed for real-time control, communications, and mixed-signal sensing where low latency, deterministic peripheral access, and compact integration are more important than large code space or high-resolution graphics.
The 50 MHz core provides up to 50 MIPS throughput, while 64 KB of Flash supports substantially larger firmware than a basic 8-bit system. Integrated CAN 2.0 and LIN 2.1 interfaces suit distributed vehicle and industrial networks. The 12-bit ADC, two analog comparators, and six PCA channels add sensing, threshold detection, pulse capture, and timer functions without requiring separate analog devices. A 24 MHz on-chip oscillator also provides a clock source for common control-system designs.
The mixed-signal architecture places communications, timing, general-purpose digital I/O, and analog conversion within one device. This integration reduces board area and the number of external interface chips required in CAN- or LIN-based controllers. The 25 digital I/O lines support sensors, actuators, status indicators, and external communications, while the 12-bit converter supports measurements beyond the resolution of many basic 8-bit systems. The 4 KB auxiliary RAM provides working storage separate from the 256-byte conventional data RAM identified for the device family.
Typical uses include automotive body and comfort modules, industrial CAN controllers, LIN nodes, sensor-conditioning equipment, motor-control support circuits, and compact industrial automation controllers. The integrated network interfaces are especially useful where a small 32-LQFP implementation is advantageous. The MCU can also serve as a communications gateway, condition-monitoring controller, or local supervisory device in a larger embedded network.
Design the power, clock, and decoupling network according to the manufacturer datasheet, and verify the exposed programming and reset behavior on the selected board. Keep analog inputs away from fast-switching traces, provide a stable reference for the ADC, and use appropriate filtering when CAN or LIN nodes operate near noisy power systems. Confirm the exact temperature, voltage, and qualification requirements for the production variant before release.
This page combines the C8051F502-IQ electrical profile, package information, application guidance, and qualified same-family alternatives. It also highlights practical distinctions among the C8051F50x devices so engineers can assess firmware compatibility, peripheral availability, and PCB reuse before selecting a drop-in device.
ドロップイン代替品: C8051F502-IQ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: C8051F502-IQ (同一形状・フットプリント) — 相違点: Product Type, ADC Resolution, Package, ADC Channels, Digital I/O Lines.
C8051F500-IQ
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →C8051F501-IQ
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →C8051F504-IQ
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
C8051F506-IQ
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
C8051F502-IM
✅ ドロップイン📋 参考代替品(カタログ未掲載)
C8051F502-IQ 最大定格&電気的特性
| Product Type | 8-bit CISC mixed-signal microcontroller |
| Maximum Core Frequency | 50 MHz |
| Maximum Throughput | 50 MIPS |
| Program Memory | 64 KB in-system programmable Flash |
| Conventional Data RAM | 256 bytes |
| Auxiliary RAM | 4 KB |
| Digital I/O Lines | 25 lines |
| ADC Resolution | 12 bits |
| ADC Channels | 25 channels |
| Analog Comparators | 2 |
| Programmable Counter Array Channels | 6 |
| On-Chip Oscillator | 24 MHz |
| CAN Interface | CAN 2.0 |
| LIN Interface | LIN 2.1 |
| Digital Communications Interfaces | SPI, UART, and I2C |
| Interrupt System | 18 sources |
| パッケージ | 32-LQFP, 7 mm x 7 mm |
| 実装タイプ | Surface mount |
| 動作温度範囲 | -40 °C to +125 °C |
C8051F502-IQ 32-lqfp, 7 mm x 7 mm ピン配置ガイド
C8051F502-IQ (32-lqfp, 7 mm x 7 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: C8051F502-IQ.
詳細は データシート をご参照ください。
主な用途
C8051F502-IQ の用途: 6 件s: Automotive Body Control Module, Industrial CAN Gateway, LIN Subnetwork Sensor Node, Condition Monitoring Controller, Compact Motor and Relay Controller, Battery-Powered Field Sensor Hub.
Automotive Body Control Module
The C8051F502-IQ fits a compact body-control design that must supervise switches and actuators while communicating over a vehicle network. Its 50 MHz core provides 50 MIPS throughput for protocol handling and deterministic control, while 25 digital I/O lines reduce the need for external logic. CAN 2.0 and LIN 2.1 support backbone and local subnetwork connections, and the 25-channel 12-bit ADC can supervise analog sensors. The 32-LQFP package also preserves a compact board outline. Qualification documentation must be matched to the selected suffix before the module is released for a specific automotive program.
おすすめ
Industrial CAN Gateway
The C8051F502-IQ is suitable for an industrial CAN gateway that converts between a CAN network and local sensors, actuators, or service logic. Its CAN 2.0 controller handles network traffic, the 50 MHz core supports protocol processing, and the 12-bit ADC can acquire up to 25 analog channels for equipment monitoring. Twenty-five digital I/O lines support local discrete signals, while the integrated UART, SPI, I2C, and LIN interfaces leave several options for local expansion. Use an industrial-grade transceiver and galvanic isolation where the bus environment requires it.
おすすめ
LIN Subnetwork Sensor Node
The C8051F502-IQ can implement a local LIN sensor node because it combines a LIN 2.1 controller with a 50 MHz processing core and extensive mixed-signal resources. The 12-bit ADC improves the dynamic range available for temperature, pressure, or position sensing, while two analog comparators can perform threshold detection without continuous software polling. Six PCA channels support timing, pulse-capture, and additional digital functions. The 25 I/O pins are useful for sensor gating, alarms, and actuators, and the 32-LQFP package supports compact distributed hardware.
おすすめ
Condition Monitoring Controller
The C8051F502-IQ fits an industrial condition-monitoring controller that samples vibration, temperature, pressure, or level signals and reports them over a network. Its 12-bit, 25-channel ADC provides a practical measurement interface for multiple analog inputs, and the six PCA channels can capture timing events or implement additional control loops. The 50 MHz core can service CAN, LIN, or UART communication alongside sampling tasks, while 25 digital I/O lines handle thresholds, relays, and status indicators. Use careful analog layout, filtering, and grounding to preserve measurement quality.
おすすめ
Compact Motor and Relay Controller
The C8051F502-IQ can serve as the supervisory controller for a compact motor, relay, or actuator system. The 50 MIPS processing capability supports responsive control loops, while six PCA channels provide timer, capture, and pulse-width-related functions that are useful for motor timing and input capture. Twenty-five digital I/O lines can distribute control and monitor fault signals, and the 12-bit ADC can measure position, current, or supply-related analog conditions. External power transistors, drivers, flyback protection, and low-noise decoupling remain necessary; the MCU does not directly power high-current loads.
おすすめ
Battery-Powered Field Sensor Hub
The C8051F502-IQ can form the core of a battery-powered field sensor hub when low standby demand and peripheral integration are important. The 24 MHz on-chip oscillator can support clocking requirements without an external crystal in suitable designs, while the integrated CAN, LIN, UART, SPI, and I2C controllers reduce the number of external communication components. The 12-bit ADC supports accurate sensor acquisition, and the 50 MHz core allows local filtering or event processing. Select the correct clock, regulator, and sleep configuration with power-budget measurements because operating-state current must be verified for the final design.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: C8051F502-IQ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | C8051F500-IQ | C8051F501-IQ | C8051F504-IQ | C8051F506-IQ | C8051F502-IM |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) |
| Core Architecture | 8-bit 8051 CISC | 8-bit 8051 CISC | 8-bit 8051 CISC | 8-bit 8051 CISC | 8-bit 8051 CISC | 8-bit 8051 CISC |
| Maximum Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Automotive and Industrial Family | C8051F50x automotive and industrial MCU family | C8051F50x family | C8051F50x family | C8051F50x family | C8051F50x family | C8051F50x family |
主な差別化要因
- Integrated mixed-signal and vehicle-network resources (vs C8051F500-IQ)
- Automotive qualification option within the same device base (vs C8051F502-IM)
- Higher integration reduces external interface components (vs C8051F504-IQ)
- Consistent 50 MHz C8051F50x platform (vs C8051F506-IQ)
設計ノート
Separate analog and digital return paths as far as the 32-LQFP pin arrangement permits, and connect all ground pins according to the manufacturer datasheet. Place the ADC input network close to the device and route sensor traces away from CAN, LIN, and switching-supply edges. A continuous ground reference under the MCU and short supply bypass connections will reduce conversion error and improve the repeatability of measurements from the 12-bit ADC.
Use the manufacturer supply and decoupling recommendations rather than a generic capacitor arrangement. Place the required bulk and high-frequency bypass capacitors at their specified power pins, with very short traces and direct ground returns. Validate the design at the highest CPU load and communication activity because the 50 MHz core and active CAN or LIN transceivers can change the dynamic supply-current profile compared with idle operation.
Do not assume that every 32-LQFP C8051F50x orderable device has identical peripheral assignments or memory capacity. Before substituting a family member, compare the complete pin table, Flash and RAM limits, ADC channels, PCA resources, interrupt vector mapping, oscillator options, and communication-controller availability. A mechanically identical package can still require firmware and board-level changes if peripheral resources or pin multiplexing differ.
Keep CAN and LIN interface routing short, controlled-impedance where required, and away from the ADC input network. Use the manufacturer's recommended transceiver, termination, protection, and isolation topology for the bus. If the MCU is mounted near a switching regulator or relay driver, maintain separated return paths and add filtering at exposed sensor inputs; the 12-bit converter cannot recover signal distortion introduced after the input has already been corrupted.
Check junction temperature using the manufacturer's power-consumption data, package thermal information, and the final PCB copper area. The 50 MHz operating point can produce greater dissipation than low-frequency idle operation, so test the maximum switching activity and communication load. Provide adequate ground-plane and via connectivity around the LQFP and avoid enclosing the device in a thermally stagnant enclosure without calculated airflow or conduction paths.
コンプライアンス情報
The C8051F502-IM family page explicitly identifies automotive qualification to AEC-Q100, but that statement does not by itself establish the qualification status of the C8051F502-IQ suffix. Exact compliance declarations for C8051F502-IQ must be confirmed in its orderable-part documentation.