Silicon Labs

C8051F502-IQ - 50MHz 8-Bit MCU with CAN | Silicon Labs

MPN: C8051F502-IQ ✓ Hoạt động
32-LQFP, 7 mm x 7 mm Package 50 MHz Speed 64 KB in-system programmable Flash Memory
MOQ: 1 |

C8051F502-IQ Tóm tắt

Silicon Labs C8051F502-IQ is an 8-bit C8051F50x mixed-signal microcontroller operating at up to 50 MHz, with 64 KB of in-system programmable Flash and 25 digital I/O lines in a 32-LQFP package. It integrates CAN 2.0 and LIN 2.1 communication, a 12-bit ADC, two analog comparators, and programmable counter-array resources for compact automotive and industrial control systems.

An 8-bit microcontroller is a compact embedded-processing component that combines a CPU, program memory, data memory, peripherals, and communication interfaces on one integrated circuit. The C8051F50x family belongs to the CISC microcontroller hierarchy and is designed for real-time control, communications, and mixed-signal sensing where low latency, deterministic peripheral access, and compact integration are more important than large code space or high-resolution graphics.

The 50 MHz core provides up to 50 MIPS throughput, while 64 KB of Flash supports substantially larger firmware than a basic 8-bit system. Integrated CAN 2.0 and LIN 2.1 interfaces suit distributed vehicle and industrial networks. The 12-bit ADC, two analog comparators, and six PCA channels add sensing, threshold detection, pulse capture, and timer functions without requiring separate analog devices. A 24 MHz on-chip oscillator also provides a clock source for common control-system designs.

The mixed-signal architecture places communications, timing, general-purpose digital I/O, and analog conversion within one device. This integration reduces board area and the number of external interface chips required in CAN- or LIN-based controllers. The 25 digital I/O lines support sensors, actuators, status indicators, and external communications, while the 12-bit converter supports measurements beyond the resolution of many basic 8-bit systems. The 4 KB auxiliary RAM provides working storage separate from the 256-byte conventional data RAM identified for the device family.

Typical uses include automotive body and comfort modules, industrial CAN controllers, LIN nodes, sensor-conditioning equipment, motor-control support circuits, and compact industrial automation controllers. The integrated network interfaces are especially useful where a small 32-LQFP implementation is advantageous. The MCU can also serve as a communications gateway, condition-monitoring controller, or local supervisory device in a larger embedded network.

Design the power, clock, and decoupling network according to the manufacturer datasheet, and verify the exposed programming and reset behavior on the selected board. Keep analog inputs away from fast-switching traces, provide a stable reference for the ADC, and use appropriate filtering when CAN or LIN nodes operate near noisy power systems. Confirm the exact temperature, voltage, and qualification requirements for the production variant before release.

This page combines the C8051F502-IQ electrical profile, package information, application guidance, and qualified same-family alternatives. It also highlights practical distinctions among the C8051F50x devices so engineers can assess firmware compatibility, peripheral availability, and PCB reuse before selecting a drop-in device.

Bộ thay thế dễ dàng lắp đặt cho C8051F502-IQ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với C8051F502-IQ (cùng hình factor và footprint) — khác nhau ở Product Type, ADC Resolution, Package, ADC Channels, Digital I/O Lines.

Silicon Labs
Product Type: 8-bit mixed-signal microcontroller
Package: 48-pin TQFP, 7 x 7 mm
ADC Channels: 32 channels
So sánh với C8051F502-IQ →
Silicon Labs
Product Type: 8-bit mixed-signal flash microcontroller
ADC Resolution: 12 bit
Package: 48-pin TQFP, 7 x 7 mm
So sánh với C8051F502-IQ →

C8051F500-IQ

✅ Drop-In ⚠️ Thông số chưa được xác minh
Silicon Labs
📦 32-LQFP (7x7 mm)
8-bit mixed-signal microcontroller · 8051 · 50 MHz · 50 MIPS · 24 MHz · 64 KB · 64K x 8 bits · 256 bytes

Liên hệ để biết giá

Xem tài liệu →

C8051F501-IQ

✅ Drop-In ⚠️ Thông số chưa được xác minh
Silicon Labs
📦 32-LQFP (7x7 mm)
8-bit mixed-signal flash microcontroller · 8051-compatible C8051 core · 50 MHz · 50 MIPS · 64 KB · 64K x 8 · Approximately 4 KB · 12 bit

Liên hệ để biết giá

Xem tài liệu →

C8051F504-IQ

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 32-LQFP (7x7 mm)
Same 32-LQFP body size with a 0 mm package-body difference; C8051F50x peripheral configuration differs from the C8051F502-IQ.

📋 Tham chiếu thay thế (không có trong danh mục)

C8051F506-IQ

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 32-LQFP (7x7 mm)
Same 32-LQFP body size with a 0 mm package-body difference; C8051F50x peripheral configuration differs from the C8051F502-IQ.

📋 Tham chiếu thay thế (không có trong danh mục)

C8051F502-IM

✅ Drop-In
📦 32-LQFP (7x7 mm)
Same 50 MHz, 64 KB Flash C8051F502 resource base with a 0 mm package-body difference; IM adds AEC-Q100 automotive qualification.

📋 Tham chiếu thay thế (không có trong danh mục)

C8051F502-IQ Tỷ lệ tối đa & tính chất điện

Product Type 8-bit CISC mixed-signal microcontroller
Maximum Core Frequency 50 MHz
Maximum Throughput 50 MIPS
Program Memory 64 KB in-system programmable Flash
Conventional Data RAM 256 bytes
Auxiliary RAM 4 KB
Digital I/O Lines 25 lines
ADC Resolution 12 bits
ADC Channels 25 channels
Analog Comparators 2
Programmable Counter Array Channels 6
On-Chip Oscillator 24 MHz
CAN Interface CAN 2.0
LIN Interface LIN 2.1
Digital Communications Interfaces SPI, UART, and I2C
Interrupt System 18 sources
Hộp 32-LQFP, 7 mm x 7 mm
Kiểu lắp đặt Surface mount
Khoảng nhiệt độ hoạt động -40 °C to +125 °C

Hướng dẫn cấu hình chân C8051F502-IQ 32-lqfp, 7 mm x 7 mm

Cấu hình chân cho C8051F502-IQ (32-lqfp, 7 mm x 7 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 32-lqfp, 7 mm x 7 mm cho C8051F502-IQ

Không có dữ liệu chân cụ thể sẵn có cho C8051F502-IQ.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

C8051F502-IQ phù hợp cho 6 Áp dụngs: Automotive Body Control Module, Industrial CAN Gateway, LIN Subnetwork Sensor Node, Condition Monitoring Controller, Compact Motor and Relay Controller, Battery-Powered Field Sensor Hub.

🚗

Automotive Body Control Module

The C8051F502-IQ fits a compact body-control design that must supervise switches and actuators while communicating over a vehicle network. Its 50 MHz core provides 50 MIPS throughput for protocol handling and deterministic control, while 25 digital I/O lines reduce the need for external logic. CAN 2.0 and LIN 2.1 support backbone and local subnetwork connections, and the 25-channel 12-bit ADC can supervise analog sensors. The 32-LQFP package also preserves a compact board outline. Qualification documentation must be matched to the selected suffix before the module is released for a specific automotive program.

🏭

Industrial CAN Gateway

The C8051F502-IQ is suitable for an industrial CAN gateway that converts between a CAN network and local sensors, actuators, or service logic. Its CAN 2.0 controller handles network traffic, the 50 MHz core supports protocol processing, and the 12-bit ADC can acquire up to 25 analog channels for equipment monitoring. Twenty-five digital I/O lines support local discrete signals, while the integrated UART, SPI, I2C, and LIN interfaces leave several options for local expansion. Use an industrial-grade transceiver and galvanic isolation where the bus environment requires it.

🧩

LIN Subnetwork Sensor Node

The C8051F502-IQ can implement a local LIN sensor node because it combines a LIN 2.1 controller with a 50 MHz processing core and extensive mixed-signal resources. The 12-bit ADC improves the dynamic range available for temperature, pressure, or position sensing, while two analog comparators can perform threshold detection without continuous software polling. Six PCA channels support timing, pulse-capture, and additional digital functions. The 25 I/O pins are useful for sensor gating, alarms, and actuators, and the 32-LQFP package supports compact distributed hardware.

📡

Condition Monitoring Controller

The C8051F502-IQ fits an industrial condition-monitoring controller that samples vibration, temperature, pressure, or level signals and reports them over a network. Its 12-bit, 25-channel ADC provides a practical measurement interface for multiple analog inputs, and the six PCA channels can capture timing events or implement additional control loops. The 50 MHz core can service CAN, LIN, or UART communication alongside sampling tasks, while 25 digital I/O lines handle thresholds, relays, and status indicators. Use careful analog layout, filtering, and grounding to preserve measurement quality.

⚡

Compact Motor and Relay Controller

The C8051F502-IQ can serve as the supervisory controller for a compact motor, relay, or actuator system. The 50 MIPS processing capability supports responsive control loops, while six PCA channels provide timer, capture, and pulse-width-related functions that are useful for motor timing and input capture. Twenty-five digital I/O lines can distribute control and monitor fault signals, and the 12-bit ADC can measure position, current, or supply-related analog conditions. External power transistors, drivers, flyback protection, and low-noise decoupling remain necessary; the MCU does not directly power high-current loads.

🔋

Battery-Powered Field Sensor Hub

The C8051F502-IQ can form the core of a battery-powered field sensor hub when low standby demand and peripheral integration are important. The 24 MHz on-chip oscillator can support clocking requirements without an external crystal in suitable designs, while the integrated CAN, LIN, UART, SPI, and I2C controllers reduce the number of external communication components. The 12-bit ADC supports accurate sensor acquisition, and the 50 MHz core allows local filtering or event processing. Select the correct clock, regulator, and sleep configuration with power-budget measurements because operating-state current must be verified for the final design.

What is the C8051F502-IQ?
The C8051F502-IQ is an 8-bit mixed-signal microcontroller from Silicon Labs with a 50 MHz core, 64 KB of in-system programmable Flash, and 32-LQFP packaging. According to the manufacturer datasheet, the device provides 25 digital I/O lines, a 12-bit ADC, two analog comparators, six PCA channels, and CAN 2.0, LIN 2.1, SPI, UART, and I2C interfaces. It is positioned for compact automotive, industrial, communications, and real-time control designs.
What are the key specifications of C8051F502-IQ that engineers should know?
The C8051F502-IQ combines a 50 MHz, 50 MIPS 8051 core with 64 KB of programmable Flash and 25 digital I/O lines. The manufacturer datasheet identifies 256 bytes of conventional RAM, 4 KB of auxiliary RAM, a 24 MHz on-chip oscillator, a 25-channel 12-bit ADC, two analog comparators, and six PCA channels. Integrated CAN 2.0, LIN 2.1, SPI, UART, and I2C interfaces reduce the external circuitry required for networked control products.
Where can I download the C8051F502-IQ datasheet PDF?
The official C8051F50x documentation is available through the Silicon Labs product page linked on this page, and the manufacturer datasheet provides the authoritative electrical, pin, clock, memory, and peripheral information. Use that document when assigning the 32-LQFP pins or calculating ADC and communication-interface timing. The product identifier must remain C8051F502-IQ because temperature, qualification, and packing suffixes can distinguish devices with otherwise similar core resources.
Where can I find the C8051F502-IQ pinout?
The C8051F502-IQ pinout is documented in the manufacturer's C8051F50x datasheet, which should be used for the definitive 32-LQFP assignments and exposed-pad requirements. The device uses a 32-LQFP, 7 mm x 7 mm package according to its product listing. Before routing a PCB, check the datasheet pin-description table against the selected programming method, oscillator configuration, analog inputs, reset connection, communication signals, supply pins, and ground requirements.
What is the operating temperature range of the C8051F502-IQ?
The C8051F502-IQ is specified for operation from -40 °C to +125 °C, making it appropriate for industrial temperature environments. The manufacturer documentation describes the C8051F50x family as automotive and industrial, but qualification status must be matched to the exact suffix rather than inferred from the family description. Confirm the voltage limits and qualification records for C8051F502-IQ in the manufacturer datasheet before treating the device as qualified for a specific automotive program.
Does the C8051F502-IQ support CAN and LIN?
Yes. The C8051F502-IQ supports CAN 2.0 and LIN 2.1 in addition to SPI, UART, and I2C. According to the manufacturer datasheet, these interfaces are integrated into the 8051 MCU family alongside 50 MHz operation and mixed-signal resources. The built-in network controllers allow a compact controller to communicate without a separate CAN or LIN transceiver, although appropriate bus transceivers and protection components are still required on the physical network.
What is the difference between C8051F502-IQ and C8051F502-IM?
The C8051F502-IM is explicitly described by Silicon Labs as automotive-grade, qualified and tested to AEC-Q100 with operation up to 125 °C. The C8051F502-IQ is identified as an industrial-temperature C8051F502 variant with a -40 °C to +125 °C range. Both belong to the same C8051F50x device family, but qualification evidence must be selected for the exact suffix and end-market certification requirements.
When should I choose C8051F502-IQ over another C8051F50x device?
Choose C8051F502-IQ when a design needs the 50 MHz core, 64 KB of Flash, 25 digital I/O lines, 12-bit ADC, and integrated CAN and LIN interfaces in a 32-LQFP footprint. Select a different family member only after checking the exact peripheral, memory, and qualification differences that affect the design. C8051F502-IM is appropriate when an AEC-Q100 automotive record is required, while the IQ variant serves general industrial-temperature requirements.
Is C8051F502-IQ suitable for an industrial CAN controller?
The C8051F502-IQ is suitable for many industrial CAN-controller designs because it combines a 50 MHz core with CAN 2.0, a 12-bit ADC, 25 digital I/O lines, and a 32-LQFP package. The ADC can process sensor inputs, the PCA supports timing and edge-capture tasks, and the digital I/O can operate actuators and status devices. Use an industrial-rated transceiver, isolation strategy, protection network, and appropriate regulatory design for the installation environment.
What can replace the C8051F502-IQ?
The closest same-family replacements are C8051F500-IQ, C8051F501-IQ, C8051F504-IQ, C8051F506-IQ, and the automotive-qualified C8051F502-IM, all associated with the 32-LQFP C8051F50x family. A replacement is not automatically firmware-compatible because Flash capacity, RAM, analog channels, timers, and communication resources may differ. Validate the complete peripheral list, pin mapping, clock setup, and existing firmware before authorizing a drop-in substitution.
Is C8051F502-IQ the same as C8051F502-IQR?
C8051F502-IQ and C8051F502-IQR refer to closely related orderable variants of the C8051F502 device, with the final suffix identifying ordering or packing information. The IQR listing is identified as a 32-QFP, 50 MIPS device with 64 KB of Flash, 4 KB of RAM, CAN 2.0, LIN 2.1, SPI, UART, and I2C. Confirm the manufacturer's ordering table for the exact temperature, qualification, and reel-versus-tube differences.
What is the best cross-brand equivalent for C8051F502-IQ?
No cross-brand drop-in equivalent can be confirmed from the available manufacturer and comparison information. A cross-brand candidate would need the same 32-LQFP pin arrangement, 50 MHz performance class, 64 KB Flash class, 12-bit mixed-signal resources, and compatible CAN and LIN peripherals. Because those requirements are unusually specific, changing manufacturer can alter clock, interrupt, analog, and bootloader behavior; treat any cross-brand proposal as a redesign unless its documentation proves pin compatibility.
Where can I buy C8051F502-IQ online?
Use the Request a Quote form on this page to request C8051F502-IQ availability, lead time, and order handling from XAIPART. The quote request identifies the exact C8051F502-IQ orderable suffix and helps prevent confusion with related C8051F502 variants. Before ordering, confirm the required package form, quantity, production schedule, traceability requirements, and whether a tape-and-reel packing option is needed.
What is the price of C8051F502-IQ?
The current commercial terms for C8051F502-IQ are handled through the Request a Quote form on this page. Submit the exact MPN, required quantity, package form, and target delivery date to receive a current quotation. Because distributor inventory and pricing can change by quantity and order date, the quote form is the appropriate route for a binding unit-price and availability response.
What is the lead time and stock status of C8051F502-IQ?
Current C8051F502-IQ stock and lead time should be confirmed through the Request a Quote form on this page. Include the production quantity, scheduled deployment date, acceptable packing style, and any traceability or automotive documentation requirements. Distributor listings indicate market availability, but a quotation tied to your quantity and delivery schedule provides the actionable commitment needed for production planning.
How much power and thermal design is needed for the C8051F502-IQ?
The C8051F502-IQ should be designed using the supply-current and package thermal data in the manufacturer datasheet; those operating-condition figures are required for a defensible thermal calculation. The 32-LQFP package provides a compact thermal path, but copper area, airflow, ambient temperature, and switching activity still determine junction temperature. Use the PCB thermal model and test the assembled board at the maximum expected processor and communications load.

Dữ liệu tham khảo kỹ thuật cho C8051F502-IQ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the C8051F502-IQ for a compact automotive or industrial controller that requires a 50 MHz 8051 core, 64 KB of programmable Flash, 25 digital I/O lines, a 12-bit ADC, and integrated CAN and LIN communications. Its 32-LQFP package and mixed-signal resources are particularly useful when board area and external component count are priorities. Select C8051F502-IM when an explicitly AEC-Q100-qualified automotive variant is required. Consider C8051F500-IQ, C8051F501-IQ, C8051F504-IQ, or C8051F506-IQ only after a detailed comparison of memory, peripherals, pin multiplexing, clock options, and firmware dependencies. Their common 32-LQFP family format makes them candidates for PCB reuse, but it does not by itself prove firmware compatibility. No cross-brand replacement should be approved until its documentation establishes identical pin behavior and provides the required Flash, RAM, ADC, timer, CAN, and LIN resources.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này C8051F500-IQ C8051F501-IQ C8051F504-IQ C8051F506-IQ C8051F502-IM
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 32-LQFP (7x7 mm) 32-LQFP (7x7 mm) 32-LQFP (7x7 mm) 32-LQFP (7x7 mm) 32-LQFP (7x7 mm) 32-LQFP (7x7 mm)
Core Architecture 8-bit 8051 CISC 8-bit 8051 CISC 8-bit 8051 CISC 8-bit 8051 CISC 8-bit 8051 CISC 8-bit 8051 CISC
Maximum Frequency 50 MHz 50 MHz 50 MHz 50 MHz 50 MHz 50 MHz
Automotive and Industrial Family C8051F50x automotive and industrial MCU family C8051F50x family C8051F50x family C8051F50x family C8051F50x family C8051F50x family

Bảo phân biệt quan trọng

  • Integrated mixed-signal and vehicle-network resources (vsC8051F500-IQ)
  • Automotive qualification option within the same device base (vsC8051F502-IM)
  • Higher integration reduces external interface components (vsC8051F504-IQ)
  • Consistent 50 MHz C8051F50x platform (vsC8051F506-IQ)

Ghi chú thiết kế

Separate analog and digital return paths as far as the 32-LQFP pin arrangement permits, and connect all ground pins according to the manufacturer datasheet. Place the ADC input network close to the device and route sensor traces away from CAN, LIN, and switching-supply edges. A continuous ground reference under the MCU and short supply bypass connections will reduce conversion error and improve the repeatability of measurements from the 12-bit ADC.

Use the manufacturer supply and decoupling recommendations rather than a generic capacitor arrangement. Place the required bulk and high-frequency bypass capacitors at their specified power pins, with very short traces and direct ground returns. Validate the design at the highest CPU load and communication activity because the 50 MHz core and active CAN or LIN transceivers can change the dynamic supply-current profile compared with idle operation.

Do not assume that every 32-LQFP C8051F50x orderable device has identical peripheral assignments or memory capacity. Before substituting a family member, compare the complete pin table, Flash and RAM limits, ADC channels, PCA resources, interrupt vector mapping, oscillator options, and communication-controller availability. A mechanically identical package can still require firmware and board-level changes if peripheral resources or pin multiplexing differ.

Keep CAN and LIN interface routing short, controlled-impedance where required, and away from the ADC input network. Use the manufacturer's recommended transceiver, termination, protection, and isolation topology for the bus. If the MCU is mounted near a switching regulator or relay driver, maintain separated return paths and add filtering at exposed sensor inputs; the 12-bit converter cannot recover signal distortion introduced after the input has already been corrupted.

Check junction temperature using the manufacturer's power-consumption data, package thermal information, and the final PCB copper area. The 50 MHz operating point can produce greater dissipation than low-frequency idle operation, so test the maximum switching activity and communication load. Provide adequate ground-plane and via connectivity around the LQFP and avoid enclosing the device in a thermally stagnant enclosure without calculated airflow or conduction paths.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The C8051F502-IM family page explicitly identifies automotive qualification to AEC-Q100, but that statement does not by itself establish the qualification status of the C8051F502-IQ suffix. Exact compliance declarations for C8051F502-IQ must be confirmed in its orderable-part documentation.

Dữ liệu được xác minh vào: 2026-11-19 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

C8051F502-IQ datasheet C8051F502-IQ specifications C8051F502-IQ pinout C8051F502-IQ 32-LQFP C8051F502-IQ 50MHz C8051F502-IQ 64KB Flash Silicon Labs C8051F502-IQ C8051F502-IQ CAN LIN C8051F502-IQ equivalent C8051F502-IQ replacement C8051F502-IQ price C8051F502-IQ stock C8051F502-IQ vs C8051F502-IM C8051F502-IQ application circuit

Các bộ phận và thuật ngữ liên quan

Silicon Labs C8051F502-IQ C8051F502-IQR C8051F502-IM C8051F500-IQ C8051F501-IQ C8051F504-IQ C8051F506-IQ 8-bit microcontroller 8051 core CISC mixed-signal MCU embedded microcontroller semiconductor CAN 2.0 LIN 2.1 SPI UART I2C 12-bit ADC Programmable Counter Array 32-LQFP LQFP family surface-mount package AEC-Q100 in-system programmable Flash
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ