Silicon Labs

C8051F582-IQ - 50MHz 128KB Automotive 8051 MCU | Silicon Labs

部品番号: C8051F582-IQ ✓ 生産中
2.5 V, 3.3 V, or 5 V Vdss 32-pin QFP Package 50 MHz Speed 128 KB Memory
MOQ: 1 |

C8051F582-IQ 概要

The Silicon Labs C8051F582-IQ is an automotive and industrial 8-bit C8051F58x microcontroller operating at up to 50 MHz, with 128 KB of embedded Flash memory, CAN and LIN connectivity, and a 32-pin QFP package. Designed for compact vehicle body, gateway, and mixed-signal control systems, it combines a 50 MIPS-class core, 8 KB of RAM, and integrated communication and analog peripherals in one surface-mount device.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into a single chip. The C8051F58x family belongs to the 8051 embedded-control hierarchy, where each device executes firmware to monitor inputs, process data, and control outputs. The C8051F582-IQ extends this architecture with automotive-oriented mixed-signal and network functionality suitable for distributed electronic control units, sensor interfaces, and CAN-to-LIN gateway equipment.

Key features include a maximum 50 MHz clock, 128 KB Flash, 8 KB RAM, CAN 2.0, LIN 2.1, SPI, two UARTs, and I2C. A dedicated VIO pin permits the Port I/O and reset interface to operate with 5 V logic while the internal core runs from a lower supply. The mixed-signal section provides an ADC with programmable gain and a 200 ksps class throughput, supporting compact automotive sensing and control functions without requiring a separate analog processor.

The device uses the Silicon Labs C8051 instruction set and retains the familiar 8051 core while integrating more capable communication, timing, and analog blocks. Its 32-pin QFP package exposes the required communications, digital I/O, analog inputs, clock, reset, and power connections in a widely supported surface-mount format. Pin-compatible family options allow designers to balance peripheral requirements while retaining a common PCB footprint.

Typical applications include CAN-to-LIN gateways, body-control modules, automotive sensor controllers, actuator drivers, industrial communication nodes, and mixed-signal monitoring systems. Its combination of CAN, LIN, analog conversion, and 8051-compatible software support targets distributed networks where space, deterministic control, and multiple interface types are important.

When laying out the PCB, treat the VIO supply independently from the main core supply and provide the decoupling, oscillator, and programming-interface connections recommended by the manufacturer datasheet. Confirm startup, reset, and 5 V I/O behavior in the final vehicle or industrial electrical environment.

This page consolidates the device identity, interface capabilities, family-package information, sourcing path, and practical replacement considerations. It also identifies where alternate family members require application-level verification rather than implying that every C8051F58x device is interchangeable.

ドロップイン代替品: C8051F582-IQ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: C8051F582-IQ (同一形状・フットプリント) — 相違点: Package, Product Type, ADC Resolution, Flash Memory, Serial Interfaces.

Silicon Labs
Package: 32-LQFP (7x7 mm)
Product Type: 8-bit mixed-signal microcontroller
Flash Memory: 16KB (16K x 8)
比較対象 C8051F582-IQ →
Silicon Labs
Package: 48-TQFP, 7 x 7 mm
Product Type: 8-bit Flash Microcontroller
ADC Resolution: 12 bit
比較対象 C8051F582-IQ →
Silicon Labs
Package: 32-LQFP, 7 x 7 mm
Product Type: 8-bit embedded microcontroller (MCU)
ADC Resolution: 12 bits
比較対象 C8051F582-IQ →
Silicon Labs
Package: 48-pin TQFP, 7 mm x 7 mm
Product Type: 8-bit 8051 automotive and industrial microcontroller
Serial Interfaces: SPI, I2C/SMBus, and 2 UART/USART
比較対象 C8051F582-IQ →

C8051F583-IQ

✅ ドロップイン ⚠️ 仕様未検証
Silicon Labs
📦 32-pin QFP
8-bit embedded microcontroller (MCU) · C8051F58x · 8051-compatible 8-bit core · 50 MHz · 50 MIPS · 128 KB · 128K x 8 bits · 8 KB

価格はお問い合わせください

データシートを見る →

C8051F586-IQ

✅ ドロップイン
📦 32-pin QFP
Same 50 MHz C8051F58x architecture and 32-pin QFP family package; peripheral mix differs, producing an estimated 10% parameter difference.

📋 参考代替品(カタログ未掲載)

C8051F587-IQ

✅ ドロップイン ⚠️ 仕様未検証
📦 32-pin QFP
Same 50 MHz core and 32-pin QFP family package; analog and communication feature configuration differs, with a 10% estimated parameter difference.

📋 参考代替品(カタログ未掲載)

C8051F582-IQ 最大定格&電気的特性

Product Type 8-bit automotive and industrial microcontroller
Architecture C8051 8051-compatible MCU
最大クロック周波数 50 MHz
Maximum Throughput 50 MIPS
Program Flash Memory 128 KB
RAM Memory 8 KB
Supply Voltage Options 2.5 V, 3.3 V, or 5 V
External I/O Logic Voltage 5 V
CAN Interface CAN 2.0
LIN Interface LIN 2.1
SPI Interface 1 SPI interface
UART Interface 2 UART interfaces
I2C Interface 1 I2C interface
ADC Resolution 12-bit
ADC Throughput 200 ksps
ADC Integral Nonlinearity ±1 LSB
パッケージ 32-pin QFP
実装タイプ Surface mount
Programmable Hysteresis Supported

C8051F582-IQ 32-pin qfp ピン配置ガイド

C8051F582-IQ (32-pin qfp パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

C8051F582-IQ の 32-pin qfp パッケージピン配置図

詳細なピン配置データはありません: C8051F582-IQ.

詳細は データシート をご参照ください。

主な用途

C8051F582-IQ の用途: 6 件s: Automotive CAN-to-LIN Gateway, Vehicle Body-Control Module, Automotive Sensor Controller, Industrial Communication Node, Actuator and Relay Control, Mixed-Signal Monitoring System.

🚗

Automotive CAN-to-LIN Gateway

The C8051F582-IQ suits an automotive gateway because it combines CAN 2.0, LIN 2.1, a 50 MHz 8051-compatible core, 128 KB Flash, and 8 KB RAM in a 32-pin QFP. The MCU can manage protocol translation, diagnostic routines, and coordination between CAN-connected body modules and LIN-attached sensors or actuators. Its 12-bit ADC supports local analog supervision, while the programmable digital peripherals support debouncing and event-driven control. Separate CAN and LIN transceivers, protection networks, and vehicle-specific isolation or filtering remain required. Firmware should include bus-off recovery, timeout handling, and message validation rather than assuming that the MCU-side interface provides complete network protection.

🚗

Vehicle Body-Control Module

The C8051F582-IQ provides a practical combination of control performance and communication for space-constrained body-control modules. Its 50 MHz processing capability supports deterministic state-machine execution, while 128 KB Flash provides room for application firmware and 8 KB RAM supports protocol buffers and diagnostic data. CAN and LIN connectivity allows the controller to participate in both vehicle network segments, and the 12-bit ADC can monitor resistive sensors or analog feedback. The 32-pin QFP package also reduces reliance on external logic when compared with a larger general-purpose MCU. Production design work must verify wake behavior, reset handling, 5 V I/O compatibility through VIO, and the exact automotive qualification conditions for the -IQ ordering code.

🧩

Automotive Sensor Controller

The C8051F582-IQ fits distributed sensor-controller duties where an embedded 8051 core must combine measurement and network communication in one package. Its 12-bit ADC operates at up to 200 ksps and includes programmable gain, allowing input signals to use more of the converter range before digital scaling. The device can filter and qualify sensor readings, apply hysteresis, and report events through CAN or LIN. The 50 MHz core has ample throughput for calibration handling and diagnostics, while 128 KB Flash supports local tables and algorithms. Keep analog routing away from high-speed communication nets, follow the manufacturer grounding recommendations, and confirm whether the required sensor bandwidth needs filtering beyond the converter’s raw sampling capability.

🏭

Industrial Communication Node

The C8051F582-IQ can serve as a compact industrial communications node when a design needs both CAN and LIN along with local control and analog measurement. Its 50 MHz 8051-compatible execution core can service multiple protocol tasks, while 128 KB Flash accommodates communication stacks and application logic. SPI, two UARTs, and I2C provide additional paths for sensors, memory, and service interfaces. The 32-pin QFP package is appropriate for industrial controller boards requiring a conventional, inspectable leaded surface-mount footprint. Firmware should include deterministic scheduling, CRC or frame validation, bus timeout recovery, and diagnostic counters. For harsh environments, validate transient immunity, operating-temperature limits, isolation strategy, and grounding against the complete system specification.

⚡

Actuator and Relay Control

The C8051F582-IQ is appropriate for compact actuator-control modules that need local feedback and vehicle-network coordination. Its 12-bit ADC can monitor current, position, or resistive feedback, while programmable hysteresis helps define robust switching thresholds around noisy or slowly changing sensor signals. The 50 MHz core supports debounce logic, timing sequences, fault counters, and communication response tasks. CAN and LIN allow the controller to accept commands and report operating status without a separate network processor. The 32-pin QFP provides access to the required control signals while keeping the footprint manageable for multi-board assemblies. Add suitable driver transistors or interface drivers, flyback protection for inductive loads, and analog conditioning; the MCU itself is not a direct power-stage device.

🔧

Mixed-Signal Monitoring System

The C8051F582-IQ supports mixed-signal monitoring functions that combine periodic ADC sampling with communications and local logic. Its 12-bit converter, programmable gain, and 200 ksps throughput can acquire analog sensor data, while the 50 MHz core performs filtering, threshold evaluation, and event logging. CAN, LIN, SPI, UART, and I2C allow the same controller to interface with networked sensors, local transceivers, and configuration storage. The 128 KB Flash and 8 KB RAM provide resources for calibration coefficients and short-term data buffering. Place the analog input path close to the converter pins, maintain the recommended analog and digital ground arrangement, and validate sampled signals with appropriate anti-alias filtering. Calibration code should retain raw and filtered values so field diagnostics can distinguish sensor faults from processing errors.

What is the C8051F582-IQ?
The C8051F582-IQ is a Silicon Labs 8-bit 8051-compatible automotive and industrial microcontroller with a 50 MHz maximum clock, 128 KB of Flash memory, 8 KB of RAM, CAN 2.0, LIN 2.1, and mixed-signal conversion capabilities. According to the manufacturer’s C8051F58x/F59x data sheet, the C8051F582/3/6/7 devices are offered in 32-pin QFP and QFN packages, and the -IQ ordering code identifies the automotive-grade 32-pin QFP configuration.
What are the key specifications of C8051F582-IQ?
The C8051F582-IQ combines a 50 MHz, 8051-compatible core with 128 KB Flash, 8 KB RAM, 12-bit mixed-signal conversion, and CAN, LIN, SPI, UART, and I2C interfaces. The manufacturer data sheet states that C8051F582 devices are available in 32-pin QFP and QFN packages. These characteristics position the device for compact automotive body electronics, CAN-to-LIN gateways, sensor nodes, and industrial equipment requiring several communication interfaces.
Where can I download the C8051F582-IQ datasheet PDF?
The official C8051F58x/F59x data sheet is available from Silicon Labs at https://www.silabs.com/documents/public/data-sheets/C8051F58x-59x.pdf. It covers the C8051F582 family, electrical characteristics, pin assignments, clocking, memory, analog conversion, digital communication interfaces, and package options. Use the manufacturer’s pin-description table and ordering information when assigning PCB nets or confirming the -IQ package.
Where can I find the C8051F582-IQ pinout?
The C8051F582-IQ pinout is found in the Silicon Labs C8051F58x/F59x data sheet, which identifies the 32-pin QFP package and its package drawings. Because this product page does not reproduce a verified, pin-by-pin net list, consult the manufacturer’s pin-description table before routing PCB tracks. In particular, verify VDD, VIO, ground, reset, clock, programming, analog, and communication assignments against the exact ordering code.
Is the C8051F582-IQ automotive-grade?
The C8051F582-IQ is identified as an automotive 8-bit microcontroller in Silicon Labs product information, while the broader C8051F58x family is described by the manufacturer as serving automotive and industrial systems. Qualification wording for the exact -IQ ordering code should be confirmed in the manufacturer data sheet before release. Its CAN, LIN, mixed-signal, and 32-pin package make it suitable for vehicle body electronics and gateway designs.
What is the difference between C8051F582-IQ and C8051F582-IQR?
The C8051F582-IQ and C8051F582-IQR share the same C8051F582 device identity and 32-pin package family, with the ordering suffix indicating a distinction in how the part is packaged or ordered. The IQR version appears in product listings with tape-and-reel order handling. Confirm the exact suffix against the manufacturer ordering guide and assess the difference as a commercial supply choice rather than a functional MCU upgrade.
Can C8051F586-IQ replace C8051F582-IQ?
The C8051F586-IQ is a same-family Silicon Labs candidate in 32-pin QFP devices, but it should not be treated as an automatic drop-in replacement. The manufacturer places C8051F582/3/6/7 in the same 32-pin package group, yet their mixed-signal and peripheral configurations can differ. Compare the complete pin table, ADC channels, communication interfaces, clocking, memory, and qualification requirements before approving a substitution.
When should I choose C8051F582-IQ over another C8051F58x device?
Choose the C8051F582-IQ when a design requires a 50 MHz 8051-compatible MCU with 128 KB Flash, 8 KB RAM, CAN 2.0, LIN 2.1, SPI, two UARTs, I2C, and 12-bit mixed-signal conversion in a 32-pin automotive QFP. Compare lower-pin-count or reduced-memory family members when the PCB needs fewer connections. For the C8051F583-IQ, C8051F586-IQ, or C8051F587-IQ, select according to the required analog and peripheral mix rather than package similarity alone.
What can replace the C8051F582-IQ?
The closest documented replacement candidates are same-family Silicon Labs C8051F583-IQ, C8051F586-IQ, and C8051F587-IQ devices, all associated with the 32-pin package group. No cross-brand drop-in equivalent is established by the available cross-reference results. A valid replacement must match the 32-pin footprint, 50 MHz performance, 128 KB Flash class, CAN and LIN requirements, analog functions, supply arrangement, and automotive qualification.
What is the best Silicon Labs equivalent for C8051F582-IQ?
The C8051F586-IQ is the leading same-manufacturer comparison candidate because it appears directly in cross-reference results and belongs to the C8051F58x family’s 32-pin device group. It is a conditional replacement rather than an unconditional pin-for-pin substitute. Review the exact C8051F586-IQ data sheet and compare ADC resources, port assignments, communication peripherals, memory, electrical limits, and qualification with the C8051F582-IQ before releasing production artwork.
Is C8051F582-IQ suitable for CAN-to-LIN gateway applications?
The C8051F582-IQ is well matched to CAN-to-LIN gateway designs because it combines CAN 2.0 and LIN 2.1 with 128 KB Flash, 8 KB RAM, and 12-bit analog conversion at up to 50 MHz. The same device can manage protocol conversion, diagnostic logic, and sensor inputs in a 32-pin package. Interface transceivers, protection, and network-specific timing still require separate implementation and validation.
How much power does the C8051F582-IQ consume?
The C8051F582-IQ includes low-current operating features, but a defensible supply-current budget must be taken from the manufacturer data sheet for the selected clock, supply voltage, peripheral state, and temperature. Do not infer a single current value from the 50 MHz maximum clock because active processing, idle mode, analog conversion, and communications create different loads. Check the electrical-characteristics table and include margin in the vehicle or industrial power supply.
What programming and development tools support C8051F582-IQ?
The C8051F582-IQ is supported within the Silicon Labs C8051 development ecosystem, including the manufacturer’s 8051 debug and programming tools described for the C8051F58x family. The precise adapter, software version, and supported device pack should be selected from the current Silicon Labs development-tool listing. Validate clock and debug configuration against the C8051F58x/F59x data sheet before using the tool in production programming.
How does C8051F582-IQ compare with C8051F582-IM?
The C8051F582-IQ and C8051F582-IM identify different orderable configurations within the same C8051F582 family. The -IM listing is explicitly associated with a 32-QFN 5 mm by 5 mm package, whereas -IQ is identified as a 32-pin QFP configuration. They are therefore not package-identical substitutes and require different PCB land patterns despite sharing the same underlying device family and core capabilities.
Where can I buy C8051F582-IQ and request a quote?
The C8051F582-IQ can be requested through XAIPART’s Request a Quote form on this page, where package, quantity, delivery, and sourcing requirements can be reviewed. Current unit pricing and stock should be confirmed through that form rather than inferred from a historical listing. The -IQ suffix and 32-pin QFP package should be stated clearly to avoid confusion with the QFN-based -IM ordering code.

エンジニアリング参考データ: C8051F582-IQ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the C8051F582-IQ when an automotive or industrial design requires a 50 MHz 8051-compatible MCU with 128 KB Flash, 8 KB RAM, 12-bit mixed-signal conversion, CAN 2.0, LIN 2.1, SPI, two UARTs, and I2C in a 32-pin QFP. It is particularly suitable for CAN-to-LIN gateways, body-control modules, compact sensor controllers, and actuator-control products. Consider the C8051F583-IQ when its peripheral mix more closely matches the required analog functions, or the C8051F586-IQ when its documented configuration satisfies the interface and ADC requirements. The C8051F587-IQ may fit designs needing a different same-family peripheral balance. Because these alternatives share the C8051F58x family and 32-pin package group, verify the complete pin table and electrical limits before substitution. Do not select the QFN-based C8051F582-IM as a drop-in option for a QFP board.

代替品との比較

パラメータ この製品 C8051F583-IQ C8051F586-IQ C8051F587-IQ
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 32-pin QFP 32-pin QFP 32-pin QFP 32-pin QFP
Maximum Clock Frequency 50 MHz 50 MHz 50 MHz 50 MHz
Core Architecture 8051-compatible C8051 8051-compatible C8051 8051-compatible C8051 8051-compatible C8051
CAN Interface CAN 2.0 CAN 2.0 CAN 2.0 CAN 2.0
LIN Interface LIN 2.1 LIN 2.1 LIN 2.1 LIN 2.1
Supply Voltage Options 2.5 V, 3.3 V, or 5 V 2.5 V, 3.3 V, or 5 V 2.5 V, 3.3 V, or 5 V 2.5 V, 3.3 V, or 5 V

主な差別化要因

  • Integrated CAN and LIN connectivity (vs C8051F586-IQ)
  • Mixed-signal capability in a 32-pin package (vs C8051F587-IQ)
  • 50 MHz processing with 128 KB Flash (vs C8051F583-IQ)

設計ノート

Power VDD and the VIO domain as separate rails in the schematic. The manufacturer states that Port I/O and RST can interface with 5 V logic when VIO is set to 5 V. Follow the data sheet for allowable combinations, decoupling capacitance, sequencing, and power-state limits. Do not assume that a 5 V VIO setting changes the internal core supply requirement or permits every peripheral pin to tolerate unrestricted 5 V.

Keep the 32-pin QFP footprint mechanically compatible with the exact -IQ ordering code and route sensitive analog inputs away from CAN, LIN, SPI, UART, and clock nets. Place decoupling capacitors at the supply pins according to the manufacturer layout guidance, provide a low-impedance ground plane, and reserve programming and debug access. Because the -IM version uses a 5 mm by 5 mm QFN package, it must not be placed on the same land pattern as the -IQ QFP device.

Treat communication interfaces as digital signals even when they originate from a slow control system. Respect setup and hold timing, drive-strength, input-threshold, and maximum-pin-voltage limits in the data sheet, and use series damping where edge rates or routed lengths could cause ringing. For analog measurements, use local filtering and a quiet return path so CAN and LIN switching activity does not disturb the 12-bit ADC input and programmable-gain threshold decisions.

A common mistake is treating all C8051F58x suffix variants as interchangeable. Compare the exact ordering code, package drawing, pin table, ADC resources, communication ports, memory configuration, clock requirements, and qualification before substitution. In particular, C8051F582-IQ is a 32-pin QFP ordering code, while C8051F582-IM is associated with a 32-QFN 5 mm by 5 mm package; those choices require different PCB footprints despite sharing the same family name.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The device is described as an automotive microcontroller, but exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements for the C8051F582-IQ ordering code require confirmation from the manufacturer product documentation or declaration.

関連検索

C8051F582-IQ datasheet C8051F582-IQ pinout C8051F582-IQ datasheet pdf C8051F582-IQ equivalent C8051F582-IQ replacement C8051F582-IQ schematic C8051F582-IQ CAN LIN microcontroller C8051F582-IQ 32 pin QFP C8051F582-IQ vs C8051F586-IQ C8051F582-IQ price Silicon Labs C8051F582-IQ C8051F582 automotive CAN LIN MCU

関連部品&用語

Silicon Labs C8051F582-IQ C8051F583-IQ C8051F586-IQ C8051F587-IQ C8051F58x 8051-compatible microcontroller 8-bit microcontroller embedded microcontroller system-on-chip CAN 2.0 LIN 2.1 SPI UART I2C 12-bit ADC programmable gain 50 MHz 128 KB Flash 8 KB RAM 32-pin QFP QFP package family surface-mount package mixed-signal control automotive body electronics CAN-to-LIN gateway
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示