Texas Instruments

CD4033BPW - 4-Bit Decade Counter | Texas Instruments | Displays

部品番号: CD4033BPW ✓ 生産中
TSSOP-16 (PW) Package Positive edge Speed
MOQ: 1 |

CD4033BPW 概要

Texas Instruments CD4033BPW is a CMOS decade counter and divider with decoded seven-segment display outputs and ripple blanking, packaged in a 16-pin TSSOP (PW). The device provides one five-bit counter element with a positive-edge clock, four decoded display outputs, and a single-digit counting range suited to compact numeric displays.

A CMOS decade counter is a synchronous digital logic component that advances through ten states and then repeats. The CD4033B family combines a five-stage Johnson counter with decoding circuitry that produces four segment outputs for one display digit. By integrating the counter and display decoder, the CD4033BPW reduces the logic count required around a common-cathode seven-segment display while supporting ripple blanking between adjacent digits.

The primary functional characteristics are a five-bit decade counter, positive-edge triggering, four decoded segment outputs, and a 16-pin TSSOP package. Its decoded outputs are intended for common-cathode seven-segment displays. This makes the device useful in instruments, panel meters, appliance interfaces, counters, timers, and other systems that need compact decimal counting without a microcontroller performing each display update.

The counter advances on the rising edge of its clock input and can be initialized through its reset function. The Johnson-counter architecture and integrated decoder organize the counting sequence before presenting segment information to the display. Ripple blanking reduces the visible interaction between successive digits in a multidigit arrangement, although the external display, current-limiting, and blanking implementation must be designed for the intended digit count and drive configuration.

The CD4033BPW is suited to laboratory counters, digital timers, household appliances, industrial panel indicators, and low-component-count display systems. Its principal advantage over a software-driven approach is local, hardware-based state management: the clock and decoded outputs can continue operating independently of a main processor. Its main trade-off is the limited four-output interface, which suits displays using one shared segment set rather than independently multiplexed high-digit-count displays.

For reliable operation, follow the manufacturer pin-description table when assigning PCB tracks, provide the specified supply voltage and common ground, and use the recommended input decoupling. Keep display-routing and counter-clock traces away from high-current switching paths. Confirm the display polarity and segment mapping before layout because the decoded outputs are designed for a common-cathode seven-segment arrangement.

This page organizes the manufacturer device information, order-code compatibility, comparison parameters, and practical implementation guidance for engineers evaluating the CD4033BPW for decimal display and counting designs. It also distinguishes electrically identical order codes from changes that require different package or sourcing considerations.

ドロップイン代替品: CD4033BPW — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

CD4033BPWR

✅ ドロップイン
📦 TSSOP-16 (PW)
Identical counter and decoded-output ratings; reel-oriented order code differs from CD4033BPW by 0% in key parameters.

📋 参考代替品(カタログ未掲載)

CD4033BPWG4

✅ ドロップイン
📦 TSSOP-16 (PW)
Identical CD4033B counter and display functions; G4 order suffix differs, with key electrical parameters unchanged.

📋 参考代替品(カタログ未掲載)

CD4033BPWE4

✅ ドロップイン
📦 TSSOP-16 (PW)
Identical 16-pin TSSOP counter/divider; E4 order suffix differs, with no change to the stated key electrical parameters.

📋 参考代替品(カタログ未掲載)

CD4033BPW 最大定格&電気的特性

Product Type CMOS decade counter/divider with decoded 7-segment outputs
Counter Element Count 1 element
Counter Width 5 bit
Counting Sequence Decade
Clock Edge Positive edge
Decoded Display Output 4 seven-segment segment outputs
Display Compatibility Common-cathode seven-segment display
Ripple Blanking Supported
動作温度範囲 -55 °C to 125 °C
パッケージ TSSOP-16 (PW)
ピン数 16 pins
実装タイプ Surface mount
Logic Family CD4000B CMOS series
出力タイプ Decoded 7-segment outputs

CD4033BPW tssop-16 (pw) ピン配置ガイド

CD4033BPW (tssop-16 (pw) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

CD4033BPW の tssop-16 (pw) パッケージピン配置図

詳細なピン配置データはありません: CD4033BPW.

詳細は データシート をご参照ください。

主な用途

CD4033BPW の用途: 6 件s: Digital Frequency Counter, Laboratory Timer, Appliance Control Panel, Industrial Panel Indicator, Pulse and Event Counter, Educational Electronics Counter.

🔧

Digital Frequency Counter

The CD4033BPW suits a standalone decimal counting stage in a frequency-counter, event-counter, or laboratory instrument. Its one five-bit decade element advances on the positive clock edge, while the decoded outputs directly support one common-cathode seven-segment digit. Using four segment outputs avoids the logic overhead of decoding the counter state externally and can reduce the display-driver footprint. The clock input must have a clean rising edge, so the source signal should pass through a suitable conditioning stage when rise time or feedback is uncertain. Supply bypassing should be placed close to pins 8 and 16, and the display segment current must remain within the limits of the selected display and output configuration.

⏱️

Laboratory Timer

A CD4033BPW can implement the visible decade stage of a laboratory timer or pulse-duration instrument. The hardware counter tracks successive clock events while the decoded segment outputs present the active digit, reducing microcontroller workload and allowing the display state to remain stable between processor updates. For useful timing resolution, connect the timer source through a comparator or conditioning circuit before the clock input rather than allowing an analog signal to cross the digital threshold slowly. Reset behavior, clock polarity, and available supply voltage should be verified from the manufacturer datasheet, while the common-cathode display must include the appropriate segment current-limiting arrangement.

🏠

Appliance Control Panel

The CD4033BPW is appropriate for appliance and equipment panels that need one visible decimal count without a full display controller. Timer expirations, cycle counts, or user-programmed settings can be represented by the decade counter and decoded outputs while the surrounding control electronics handles the user interface. Its four segment outputs suit a common-cathode one-digit indicator and can reduce component count compared with a programmable display driver. Mechanical switches and relays should be isolated from the clock and supply traces, and the panel display should be selected with adequate brightness current. Verify the reset and clock behavior under power-up conditions so that the visible count does not change unexpectedly during startup.

🏭

Industrial Panel Indicator

The CD4033BPW can provide a compact decimal indication in industrial counting panels, production fixtures, and process-monitoring equipment. The integrated decade counter and seven-segment decoder allow a low-part-count display stage, while ripple blanking can support a multidigit arrangement when adjacent stages are designed correctly. Use a common-cathode display with suitable segment resistors, and keep the counter clock away from motor-control, relay, and switching-power nodes. Supply filtering and a defined ground return are particularly important when the display is mounted away from the logic enclosure. The manufacturer-recommended operating range and absolute-maximum limits should be checked against the enclosure temperature and measured supply tolerances.

📡

Pulse and Event Counter

A CD4033BPW can form the visible decimal section of a pulse, batch, or event counter. Each accepted rising edge advances the five-bit decade counter, and the decoded outputs present the current count to one common-cathode digit. This architecture is useful when counting must remain active independently of a supervisory controller or when a low-cost local display is preferred to a multiplexed display bus. Input pulses should be conditioned to prevent multiple transitions from one physical event, and the maximum clock rate should be checked against the manufacturer timing characteristics. The reset function should be debounced if it is controlled by a panel switch, otherwise contact bounce can produce an incorrect visible count.

🎓

Educational Electronics Counter

The CD4033BPW is useful in educational timing, counting, and digital-logic projects because it combines a counter and display decoder in one package. Students can observe decade counting directly on a common-cathode seven-segment display while learning about positive-edge triggering, reset behavior, decoded outputs, and ripple blanking. The TSSOP package supports compact educational boards, although prototype layouts should provide adequate pin access and reliable soldering. A current-limiting resistor set is required for the display segments, and a slow clock or push-button oscillator must have clean edges to avoid double counting. The manufacturer pinout and timing information should guide the schematic and board layout.

おすすめ製品の概要

74HC47 Display decoder for BCD-to-seven-segment conversion 使用用途: Digital Frequency Counter, Industrial Panel Indicator CD4055 Two-digit multiplexed decimal display driver 使用用途: Digital Frequency Counter, Laboratory Timer, Appliance Control Panel, Industrial Panel Indicator, Educational Electronics Counter 74HC00 Logic gate for clock conditioning or reset control 使用用途: Laboratory Timer, Pulse and Event Counter 74HC14 Schmitt-trigger inverter for switch and clock conditioning 使用用途: Appliance Control Panel, Pulse and Event Counter, Educational Electronics Counter
What is the CD4033BPW?
The CD4033BPW is a CMOS decade counter and divider with decoded seven-segment display outputs and ripple blanking. According to the Texas Instruments CD4033B product page, it uses one five-bit counter element, advances on the positive clock edge, and is offered in a 16-pin TSSOP package. The integrated counter and display decoder reduce the external logic required for a compact decimal display.
How many pins and display outputs does the CD4033BPW have?
The CD4033BPW has 16 pins and provides four decoded seven-segment outputs for driving a common-cathode display digit. The Texas Instruments CD4033B product page identifies the device as a decade counter/divider with decoded 7-segment outputs and ripple blanking. Use the manufacturer pin-description table to map clock, reset, segment outputs, supply, and ground connections when assigning PCB tracks.
What clock edge advances the CD4033BPW counter?
The CD4033BPW counter advances on the positive edge of the clock input. The Texas Instruments product information identifies it as a positive-edge, five-bit decade counter with one counter element. In a practical circuit, maintain clean rise times at the clock input, keep return paths short, and avoid routing the clock adjacent to display or switching-supply nodes where coupling could cause an unwanted count.
What display type can be driven by the CD4033BPW?
The CD4033BPW is designed to drive one common-cathode seven-segment display digit through four decoded segment outputs. The Texas Instruments CD4033B product page confirms the decoded seven-segment and ripple-blanking functions. Confirm the display pinout and segment letters on the selected display before connecting the IC, because physical segment assignments can differ between display manufacturers even when the electrical interface is compatible.
Where can I download the CD4033BPW datasheet PDF?
The CD4033BPW datasheet is available from the official Texas Instruments CD4033B documentation link on this page. The manufacturer document contains the electrical characteristics, device description, package details, and connection information. Use that document together with the selected display datasheet to verify supply limits, timing values, output behavior, and the complete pin assignments before finalizing a PCB.
Where can I find the CD4033BPW pinout?
The CD4033BPW pinout is found in the pin-configuration and connection diagrams of the Texas Instruments CD4033B datasheet. The device uses a 16-pin TSSOP package and includes clock, reset, decoded display, supply, and ground connections. Use the pin-description table when assigning tracks because the four decoded outputs correspond to display segment functions rather than a conventional parallel binary bus.
What is the difference between CD4033BPW and CD4033BPWR?
The CD4033BPW and CD4033BPWR use the same 16-pin TSSOP CD4033B device and matching counter and display-decoder functions. The principal ordering difference is the shipment format, with the R suffix identifying the reel-oriented order code. Both are electrically compatible for a correctly designed TSSOP layout, so the distinction should be made against the assembly process and required shipping format rather than circuit performance.
What can replace the CD4033BPW on an existing PCB?
The closest direct replacement is another Texas Instruments CD4033B order code specified for the same 16-pin TSSOP footprint, such as CD4033BPWR when reel packaging is appropriate. Confirm the complete order code, assembly method, and manufacturer operating specifications before substitution. A component carrying the CD4000-family function is not automatically a drop-in replacement because display output definitions and package assignments can differ.
Is CD4033BPW the same as the CD4033BPW-grade family?
CD4033BPW identifies the Texas Instruments 16-pin TSSOP ordering configuration of the CD4033B device. Additional grade, temperature, or shipment characters can change procurement conditions without changing the fundamental decade-counter and seven-segment-decoder architecture. Compare the manufacturer part-number suffixes and electrical-temperature requirements explicitly rather than relying on the base family name alone.
When should I choose CD4033BPW instead of a microcontroller-based display driver?
Choose the CD4033BPW when the system needs a dedicated decimal counter with four decoded display outputs and no general-purpose firmware support. It can maintain the count locally and reduces the logic footprint for a simple instrument or appliance. Choose a microcontroller when multiple digits must be multiplexed, nondecimal counting is required, display patterns are configurable, or the display count is likely to expand.
Is CD4033BPW suitable for industrial timing and counting equipment?
The CD4033BPW can be used in counting and timing equipment when its manufacturer electrical limits, supply requirements, and -55 °C to 125 °C operating-temperature rating fit the design. The decoded outputs also reduce the component count in common-cathode display designs. Add supply filtering, current limiting, and appropriate display drive protection for the selected operating environment.
How much supply bypassing does the CD4033BPW need?
Place the manufacturer-recommended bypass capacitor between the CD4033BPW supply and ground pins, with the capacitor and ground path positioned close to the device. The CD4033B datasheet should be consulted for the required capacitance and layout details. Keep the connection short because a long supply loop can increase susceptibility to switching noise and counter-clock glitches.
Can the CD4033BPW drive multiple seven-segment digits?
The CD4033BPW provides four decoded segment outputs for one common-cathode digit and includes ripple blanking for multidigit arrangements. Multiple digits generally require additional display-interface circuitry and suitable blanking control rather than simply connecting every digit in parallel. The ripple-blanking function helps suppress visible carry effects between digits, but it does not remove the need for correct drive architecture.
Is CD4033BPW suitable for common-cathode and common-anode displays?
The CD4033BPW is intended for common-cathode seven-segment displays because its decoded outputs sink the selected display segments. A common-anode display reverses the current path and is not a direct connection for these outputs. Use the Texas Instruments CD4033B documentation and the display datasheet to confirm polarity, current limits, and any driver circuitry required for a different display architecture.
How do I obtain a price or lead time for CD4033BPW?
Use the Request a Quote form on this page to request the current CD4033BPW price, stock position, minimum order quantity, and lead time. The manufacturing and shipment suffix should be selected to match the PCB assembly process, including the distinction between tube-compatible and reel-oriented order codes. The manufacturer CD4033B product page also provides ordering and quality information for lifecycle planning.
What are the key specifications engineers should know about CD4033BPW?
The CD4033BPW is a 16-pin TSSOP CMOS logic IC implementing one positive-edge, five-bit decade counter with decoded seven-segment outputs and ripple blanking. According to the Texas Instruments product page, it is intended for common-cathode display applications and has an operating-temperature range of -55 °C to 125 °C. Verify supply voltage, timing, output-drive, and absolute-maximum limits from the manufacturer datasheet before design release.

エンジニアリング参考データ: CD4033BPW — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose CD4033BPW when a compact design needs one dedicated decimal-counting digit with decoded common-cathode display outputs and ripple blanking. Its integrated counter and decoder can reduce logic count in timers, pulse counters, appliances, and industrial panels. Choose CD4033BPWR when reel-oriented handling suits the assembly process, CD4033BPWG4 when that particular Texas Instruments order code is available through the required supply channel, and CD4033BPWE4 when its order and packaging configuration matches procurement requirements. These options retain the same TSSOP-16 footprint and core counter/display functions. Use a microcontroller instead when the design requires multiplexed displays, configurable characters, multiple independent digits, or count values beyond a simple decade stage. Before releasing a PCB, verify the exact suffix, supply requirements, timing limits, pin assignments, and display polarity in the Texas Instruments CD4033B documentation.

代替品との比較

パラメータ この製品 CD4033BPWR CD4033BPWG4 CD4033BPWE4
Package TSSOP-16 (PW) TSSOP-16 (PW) TSSOP-16 (PW) TSSOP-16 (PW)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Type CMOS decade counter/divider CMOS decade counter/divider CMOS decade counter/divider CMOS decade counter/divider
Counter Element Count 1 element 1 element 1 element 1 element
Counter Width 5 bit 5 bit 5 bit 5 bit
Clock Edge Positive edge Positive edge Positive edge Positive edge
Display Output Decoded 7-segment outputs Decoded 7-segment outputs Decoded 7-segment outputs Decoded 7-segment outputs
Ripple Blanking Supported Supported Supported Supported
Operating Temperature Range -55 °C to 125 °C -55 °C to 125 °C -55 °C to 125 °C -55 °C to 125 °C

主な差別化要因

  • Integrated decimal counter and display decoder (vs CD4033BPWR)
  • Directly compatible single-digit display architecture (vs CD4033BPWG4)
  • Pin-compatible order-code flexibility (vs CD4033BPWE4)

設計ノート

Place the manufacturer-recommended supply bypass capacitor directly between the CD4033BPW supply and ground pins. Keep the capacitor, IC, and ground-return path compact, and avoid routing the clock signal alongside display outputs or switching nodes. A short supply connection reduces the loop area through which switching noise can couple into the counter and create an erroneous count.

The CD4033BPW advances on the positive clock edge, so the input must cross its switching threshold only once per event. Use a Schmitt-trigger conditioner when the source is slow, noisy, or derived from a mechanical contact. Debounce the reset input separately and maintain a continuous ground return from the counter to the supply reference. These steps prevent repeated transitions from appearing as multiple counts.

Use the manufacturer connection diagram to assign the 16 pins rather than inferring positions from a conventional binary-counter layout. The decoded outputs drive four segment functions for a common-cathode display, and the ripple-blanking arrangement depends on how adjacent decimal stages are connected. Verify display polarity, segment mapping, and current-limiting values before applying power to prevent incorrect display states or excessive segment current.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer listing identifies the CD4033B CMOS decade counter/divider and its package options. Specific environmental and automotive compliance declarations are not stated in the cited product information.

関連検索

CD4033BPW datasheet CD4033BPW pinout CD4033BPW datasheet pdf CD4033BPW equivalent CD4033BPW replacement CD4033BPW cross reference CD4033BPW footprint CD4033BPW schematic CD4033BPW price CD4033BPW stock Texas Instruments CD4033BPW CD4033BPW TSSOP-16 counter CD4033BPW vs CD4033BPWR CD4033BPW seven segment display CD4033BPW common cathode display

関連部品&用語

Texas Instruments CD4033BPW CD4033B CD4033BPWR CD4033BPWG4 CD4033BPWE4 CMOS decade counter counter/divider Johnson counter seven-segment decoder logic IC integrated circuit semiconductor CD4000B CMOS series TSSOP-16 PW package surface mount SMD common-cathode seven-segment display ripple blanking positive-edge clock supply bypassing signal conditioning digital counter panel meter
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示