CD4033BPW - 4-Bit Decade Counter | Texas Instruments | Displays
MPN: CD4033BPW ✓ Hoạt độngCD4033BPW Tóm tắt
A CMOS decade counter is a synchronous digital logic component that advances through ten states and then repeats. The CD4033B family combines a five-stage Johnson counter with decoding circuitry that produces four segment outputs for one display digit. By integrating the counter and display decoder, the CD4033BPW reduces the logic count required around a common-cathode seven-segment display while supporting ripple blanking between adjacent digits.
The primary functional characteristics are a five-bit decade counter, positive-edge triggering, four decoded segment outputs, and a 16-pin TSSOP package. Its decoded outputs are intended for common-cathode seven-segment displays. This makes the device useful in instruments, panel meters, appliance interfaces, counters, timers, and other systems that need compact decimal counting without a microcontroller performing each display update.
The counter advances on the rising edge of its clock input and can be initialized through its reset function. The Johnson-counter architecture and integrated decoder organize the counting sequence before presenting segment information to the display. Ripple blanking reduces the visible interaction between successive digits in a multidigit arrangement, although the external display, current-limiting, and blanking implementation must be designed for the intended digit count and drive configuration.
The CD4033BPW is suited to laboratory counters, digital timers, household appliances, industrial panel indicators, and low-component-count display systems. Its principal advantage over a software-driven approach is local, hardware-based state management: the clock and decoded outputs can continue operating independently of a main processor. Its main trade-off is the limited four-output interface, which suits displays using one shared segment set rather than independently multiplexed high-digit-count displays.
For reliable operation, follow the manufacturer pin-description table when assigning PCB tracks, provide the specified supply voltage and common ground, and use the recommended input decoupling. Keep display-routing and counter-clock traces away from high-current switching paths. Confirm the display polarity and segment mapping before layout because the decoded outputs are designed for a common-cathode seven-segment arrangement.
This page organizes the manufacturer device information, order-code compatibility, comparison parameters, and practical implementation guidance for engineers evaluating the CD4033BPW for decimal display and counting designs. It also distinguishes electrically identical order codes from changes that require different package or sourcing considerations.
Bộ thay thế dễ dàng lắp đặt cho CD4033BPW — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
CD4033BPWR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CD4033BPWG4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CD4033BPWE4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CD4033BPW Tỷ lệ tối đa & tính chất điện
| Product Type | CMOS decade counter/divider with decoded 7-segment outputs |
| Counter Element Count | 1 element |
| Counter Width | 5 bit |
| Counting Sequence | Decade |
| Clock Edge | Positive edge |
| Decoded Display Output | 4 seven-segment segment outputs |
| Display Compatibility | Common-cathode seven-segment display |
| Ripple Blanking | Supported |
| Khoảng nhiệt độ hoạt động | -55 °C to 125 °C |
| Hộp | TSSOP-16 (PW) |
| Số lượng chân | 16 pins |
| Kiểu lắp đặt | Surface mount |
| Logic Family | CD4000B CMOS series |
| Kiểu đầu ra | Decoded 7-segment outputs |
Hướng dẫn cấu hình chân CD4033BPW tssop-16 (pw)
Cấu hình chân cho CD4033BPW (tssop-16 (pw) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho CD4033BPW.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CD4033BPW phù hợp cho 6 Áp dụngs: Digital Frequency Counter, Laboratory Timer, Appliance Control Panel, Industrial Panel Indicator, Pulse and Event Counter, Educational Electronics Counter.
Digital Frequency Counter
The CD4033BPW suits a standalone decimal counting stage in a frequency-counter, event-counter, or laboratory instrument. Its one five-bit decade element advances on the positive clock edge, while the decoded outputs directly support one common-cathode seven-segment digit. Using four segment outputs avoids the logic overhead of decoding the counter state externally and can reduce the display-driver footprint. The clock input must have a clean rising edge, so the source signal should pass through a suitable conditioning stage when rise time or feedback is uncertain. Supply bypassing should be placed close to pins 8 and 16, and the display segment current must remain within the limits of the selected display and output configuration.
Được đề xuất
Laboratory Timer
A CD4033BPW can implement the visible decade stage of a laboratory timer or pulse-duration instrument. The hardware counter tracks successive clock events while the decoded segment outputs present the active digit, reducing microcontroller workload and allowing the display state to remain stable between processor updates. For useful timing resolution, connect the timer source through a comparator or conditioning circuit before the clock input rather than allowing an analog signal to cross the digital threshold slowly. Reset behavior, clock polarity, and available supply voltage should be verified from the manufacturer datasheet, while the common-cathode display must include the appropriate segment current-limiting arrangement.
Được đề xuất
Appliance Control Panel
The CD4033BPW is appropriate for appliance and equipment panels that need one visible decimal count without a full display controller. Timer expirations, cycle counts, or user-programmed settings can be represented by the decade counter and decoded outputs while the surrounding control electronics handles the user interface. Its four segment outputs suit a common-cathode one-digit indicator and can reduce component count compared with a programmable display driver. Mechanical switches and relays should be isolated from the clock and supply traces, and the panel display should be selected with adequate brightness current. Verify the reset and clock behavior under power-up conditions so that the visible count does not change unexpectedly during startup.
Được đề xuất
Industrial Panel Indicator
The CD4033BPW can provide a compact decimal indication in industrial counting panels, production fixtures, and process-monitoring equipment. The integrated decade counter and seven-segment decoder allow a low-part-count display stage, while ripple blanking can support a multidigit arrangement when adjacent stages are designed correctly. Use a common-cathode display with suitable segment resistors, and keep the counter clock away from motor-control, relay, and switching-power nodes. Supply filtering and a defined ground return are particularly important when the display is mounted away from the logic enclosure. The manufacturer-recommended operating range and absolute-maximum limits should be checked against the enclosure temperature and measured supply tolerances.
Được đề xuất
Pulse and Event Counter
A CD4033BPW can form the visible decimal section of a pulse, batch, or event counter. Each accepted rising edge advances the five-bit decade counter, and the decoded outputs present the current count to one common-cathode digit. This architecture is useful when counting must remain active independently of a supervisory controller or when a low-cost local display is preferred to a multiplexed display bus. Input pulses should be conditioned to prevent multiple transitions from one physical event, and the maximum clock rate should be checked against the manufacturer timing characteristics. The reset function should be debounced if it is controlled by a panel switch, otherwise contact bounce can produce an incorrect visible count.
Được đề xuất
Educational Electronics Counter
The CD4033BPW is useful in educational timing, counting, and digital-logic projects because it combines a counter and display decoder in one package. Students can observe decade counting directly on a common-cathode seven-segment display while learning about positive-edge triggering, reset behavior, decoded outputs, and ripple blanking. The TSSOP package supports compact educational boards, although prototype layouts should provide adequate pin access and reliable soldering. A current-limiting resistor set is required for the display segments, and a slow clock or push-button oscillator must have clean edges to avoid double counting. The manufacturer pinout and timing information should guide the schematic and board layout.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CD4033BPW — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CD4033BPWR | CD4033BPWG4 | CD4033BPWE4 |
|---|---|---|---|---|
| Package | TSSOP-16 (PW) | TSSOP-16 (PW) | TSSOP-16 (PW) | TSSOP-16 (PW) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | CMOS decade counter/divider | CMOS decade counter/divider | CMOS decade counter/divider | CMOS decade counter/divider |
| Counter Element Count | 1 element | 1 element | 1 element | 1 element |
| Counter Width | 5 bit | 5 bit | 5 bit | 5 bit |
| Clock Edge | Positive edge | Positive edge | Positive edge | Positive edge |
| Display Output | Decoded 7-segment outputs | Decoded 7-segment outputs | Decoded 7-segment outputs | Decoded 7-segment outputs |
| Ripple Blanking | Supported | Supported | Supported | Supported |
| Operating Temperature Range | -55 °C to 125 °C | -55 °C to 125 °C | -55 °C to 125 °C | -55 °C to 125 °C |
Bảo phân biệt quan trọng
- Integrated decimal counter and display decoder (vsCD4033BPWR)
- Directly compatible single-digit display architecture (vsCD4033BPWG4)
- Pin-compatible order-code flexibility (vsCD4033BPWE4)
Ghi chú thiết kế
Place the manufacturer-recommended supply bypass capacitor directly between the CD4033BPW supply and ground pins. Keep the capacitor, IC, and ground-return path compact, and avoid routing the clock signal alongside display outputs or switching nodes. A short supply connection reduces the loop area through which switching noise can couple into the counter and create an erroneous count.
The CD4033BPW advances on the positive clock edge, so the input must cross its switching threshold only once per event. Use a Schmitt-trigger conditioner when the source is slow, noisy, or derived from a mechanical contact. Debounce the reset input separately and maintain a continuous ground return from the counter to the supply reference. These steps prevent repeated transitions from appearing as multiple counts.
Use the manufacturer connection diagram to assign the 16 pins rather than inferring positions from a conventional binary-counter layout. The decoded outputs drive four segment functions for a common-cathode display, and the ripple-blanking arrangement depends on how adjacent decimal stages are connected. Verify display polarity, segment mapping, and current-limiting values before applying power to prevent incorrect display states or excessive segment current.
Thông tin tuân thủ
The manufacturer listing identifies the CD4033B CMOS decade counter/divider and its package options. Specific environmental and automotive compliance declarations are not stated in the cited product information.