CY8C29466-24PVXA - 8-Bit M8C PSoC1 MCU 32KB Flash 24MHz | Infineon
部品番号: CY8C29466-24PVXA ⚠ ラストタイムバイ| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $7.42 | $7.42 |
| 10 | $6.85 | $68.50 |
| 100 | $6.21 | $621.00 |
| 500 | $5.74 | $2,870.00 |
| 1,000 | $5.3 | $5,300.00 |
CY8C29466-24PVXA 概要
A microcontroller (MCU) is a single integrated computer unit containing a CPU, memory, and programmable peripherals on one silicon die. The PSoC1 family belongs to the hypernym hierarchy MCU -> 8-bit microcontroller -> programmable system-on-chip -> mixed-signal controller -> embedded processor. Within that hierarchy the CY8C29xxx devices are the mid-density Flash members of the CY8C27xxx/CY8C29xxx PSoC1 families, distinguished by on-chip configurable analog and digital user modules rather than hard-wired peripherals.
Key features include 24 programmable GPIO pins, 12 programmable analog blocks, an M8C core with up to 24 MHz operation, 32 KB of Flash for application code, and 2 KB of SRAM for data. The device supports 5 V operation, in-system programming via ISSP, and offers 8 Kbytes of Flash that includes ECC-like supervision plus supervisory ROM services for boot and protection.
The CY8C29xxx architecture uses a configurable array of analog and digital blocks routed via an on-chip interconnect, allowing designers to instantiate user modules such as ADCs, filters, timers, PWMs, UARTs, and I2C at runtime. The M8C core delivers deterministic interrupt response and Harvard-style bus architecture optimized for low-power embedded control.
Typical applications include industrial control human-machine interfaces (HMI), white-goods motor control, smart sensor conditioning, USB HID bridges, white-goods user interfaces, and low-power mixed-signal embedded products. The 32 KB Flash and 2 KB SRAM comfortably host small to mid-size applications written in C or assembly with PSoC Designer.
Designers should note the 5 V supply requirement and that the 28-SSOP package has no exposed thermal pad. Place 0.1 µF decoupling close to VDD pins and route PSoC polarity at all GPIO assignments to avoid contention during programming. The CY8C29466 family was discontinued; supply is via the remanufacturer/Infineon last-time-buy channel.
This page synthesizes distributor pricing, drop-in PSoC1 family alternatives, and practical design notes not found in the manufacturer datasheet alone, accelerating redesign and qualification.
ドロップイン代替品: CY8C29466-24PVXA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: CY8C29466-24PVXA （同一形状・フットプリント） — 相違点: Package, Programmable Analog Blocks, Series, Supply Voltage.
クイック比較ツール — 並列比較する代替部品を選択:
CY8C29466-24PVXI
✅ ドロップイン✓ 在庫あり
$13.78 / 個
データシートを見る →CY8C29466-24PVXIT
✅ ドロップイン📋 参考代替品（カタログ未掲載）
CY8C29666-24PVXA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
CY8C27443-24PVXIT
✅ ドロップイン✓ 在庫あり
$3.1 / 個
データシートを見る →CY8C29466-24PVXA 最大定格＆電気的特性
| Manufacturer | Infineon Technologies (formerly Cypress Semiconductor) |
| Series | PSOC™1 CY8C29xxx |
| Core | M8C |
| データバス幅 | 8 bit |
| 最大クロック周波数 | 24 MHz |
| Program Memory Size | 32 KB (32K x 8) Flash |
| RAM Size | 2 KB |
| Number of I/O Pins | 24 |
| パッケージ | 28-SSOP (5.30 mm width, 0.209 inch) |
| 実装タイプ | Surface Mount |
| 電源電圧 | 5 V |
| Programmable Analog Blocks | 12 |
| In-System Programming | Yes (ISSP) |
| Pin/Package Code | PV (28-SSOP), X (Pb-free), A (A-grade) |
CY8C29466-24PVXA ピン構成
| ピン 1 | P0[7] — GPIO port 0 bit 7, analog input, ISSP SDATA |
| ピン 2 | P0[6] — GPIO port 0 bit 6, analog input |
| ピン 3 | P0[5] — GPIO port 0 bit 5, analog input |
| ピン 4 | P0[4] — GPIO port 0 bit 4, analog input |
| ピン 5 | P0[3] — GPIO port 0 bit 3, analog input, external AGND ref |
| ピン 6 | P0[2] — GPIO port 0 bit 2, analog input, external Vref |
| ピン 7 | P0[1] — GPIO port 0 bit 1, analog input, ISSP SCLK |
| ピン 8 | P0[0] — GPIO port 0 bit 0, analog input |
| ピン 9 | VSS — Ground |
| ピン 10 | VDD — 5 V supply voltage |
| ピン 11 | P2[7] — GPIO port 2 bit 7 |
| ピン 12 | P2[6] — GPIO port 2 bit 6 |
| ピン 13 | P2[5] — GPIO port 2 bit 5 |
| ピン 14 | P2[4] — GPIO port 2 bit 4 |
| ピン 15 | P2[3] — GPIO port 2 bit 3 |
| ピン 16 | P2[2] — GPIO port 2 bit 2 |
| ピン 17 | P2[1] — GPIO port 2 bit 1 |
| ピン 18 | P2[0] — GPIO port 2 bit 0 |
| ピン 19 | P1[7] — GPIO port 1 bit 7, analog block routing |
| ピン 20 | P1[6] — GPIO port 1 bit 6, analog block routing |
| ピン 21 | P1[5] — GPIO port 1 bit 5, analog block routing |
| ピン 22 | P1[4] — GPIO port 1 bit 4, analog block routing |
| ピン 23 | P1[3] — GPIO port 1 bit 3, analog block routing |
| ピン 24 | P1[2] — GPIO port 1 bit 2, analog block routing |
| ピン 25 | P1[1] — GPIO port 1 bit 1, analog block routing, INT0 |
| ピン 26 | P1[0] — GPIO port 1 bit 0, analog block routing, INT1 |
| ピン 27 | XRES — Active-high external reset input |
| ピン 28 | VSS — Ground |
主な用途
CY8C29466-24PVXA の用途: 7 件s: Industrial Control HMI, White Goods Motor Control, Smart Sensor Signal Conditioning, USB HID Bridge, Low-Power Mixed-Signal Embedded, Appliance User Interface, Test & Measurement Front End.
Industrial Control HMI
The CY8C29466-24PVXA fits industrial HMI panels because it integrates 12 programmable analog blocks that can scan keypad matrices and read resistive touch overlays without external glue logic. At 24 MHz the M8C core executes key-debounce, LED/PWM dimming, and LCD-driving user modules while leaving 32 KB of Flash for menu state machines. The 24 GPIO pins are sufficient to multiplex 4x5 key scans plus a character LCD bus and status LEDs. According to the PSoC1 CY8C29xxx datasheet, the configurable analog blocks can implement scanned resistance measurement with on-chip PGA - critical for USB-powered HMI that must avoid external precision parts.
おすすめ
White Goods Motor Control
The CY8C29466-24PVXA is a strong fit for white-goods motor-control sub-systems such as washing-machine drain pumps, dishwasher dispenser drives, and refrigerator damper actuators. The 12 programmable analog blocks can implement back-EMF sensing and zero-cross detection, while the digital PSoC blocks generate PWMs for TRIAC or FET drivers at 24 MHz resolution. The 32 KB Flash and 2 KB SRAM comfortably host state-based control loops in C with PSoC Designer user modules. According to Infineon's CY8C29xxx datasheet, the on-chip configurable architecture avoids external op-amps and timers, reducing BOM cost.
おすすめ
Smart Sensor Signal Conditioning
The CY8C29466-24PVXA is ideal for smart sensor signal conditioning because the 12 configurable PSoC analog blocks can implement instrumentation amplifiers, active filters, and delta-sigma ADC front-ends on-chip. This eliminates external precision components in transducer conditioning chains. At 24 MHz the M8C core can execute calibration tables, linearization, and digital filtering in firmware, while 32 KB Flash accommodates sensor-specific look-up data. According to the CY8C29xxx datasheet, the on-chip reference and gain-stage configurability enable a 16-bit-effective signal chain for thermocouple and bridge sensors.
おすすめ
USB HID Bridge
The CY8C29466-24PVXA serves as a low-cost USB HID bridge in industrial peripherals because the configurable digital PSoC blocks can implement full-speed USB 1.1 device logic alongside the M8C core. Designers can pair it with external USB transceivers or use it as the boot HID interface for legacy equipment. The 32 KB Flash is sufficient for HID class drivers, and the 2 KB SRAM handles endpoint buffering. According to the CY8C29xxx datasheet, the M8C core's deterministic interrupt latency makes HID timing reproducible across product variants.
おすすめ
Low-Power Mixed-Signal Embedded
The CY8C29466-24PVXA fits battery-powered mixed-signal embedded designs that combine sensor reading, local computation, and serial reporting. The 12 analog blocks plus M8C core deliver signal conditioning and ADC functions at low MHz clocks, which minimizes active current, and the Flash supervisory services support sleep/wake for duty-cycled sensing. With 32 KB Flash and 2 KB SRAM the device can hold a small RTOS or a state machine plus data logging buffer. According to the Infineon CY8C29xxx datasheet, sleep current and configurable clock dividers enable battery-life targets in the 1-3 year range for slow-cycle sensor nodes.
おすすめ
Appliance User Interface
The CY8C29466-24PVXA targets appliance user-interface boards with capacitive touch, LED animation, and display drivers all on one die. The M8C core at 24 MHz services CapSense user-module touch scanning plus LED PWM channels, while the 24 GPIO pins drive character displays, buzzer, and rotary encoders. The 32 KB Flash allows rich menu logic and capacitive touch firmware, with 2 KB SRAM for display buffering. According to the PSoC1 CY8C29xxx datasheet, on-chip CapSense user modules replace dedicated touch ICs, reducing BOM and PCB area.
おすすめ
Test & Measurement Front End
The CY8C29466-24PVXA can act as a configurable front-end for low-cost test and measurement instruments that benefit from on-chip signal conditioning. Designers instantiate programmable gain amplifiers, filters, and ADC paths as PSoC user modules, then route measurements over UART to a host PC. The 24 MHz core supports real-time RMS calculation and statistics, with 32 KB Flash for instrument-specific calibration. According to the CY8C29xxx datasheet, the configurable architecture reduces the analog BOM count versus fixed-function MCUs and accelerates prototype iteration.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: CY8C29466-24PVXA — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | CY8C29466-24PVXI | CY8C29466-24PVXIT | CY8C29666-24PVXA | CY8C27443-24PVXIT |
|---|---|---|---|---|---|
| Package | 28-SSOP | 28-SSOP - same | 28-SSOP - same | 28-SSOP - same | 28-SSOP - same |
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon |
| Core | M8C 8-bit | M8C 8-bit | M8C 8-bit | M8C 8-bit | M8C 8-bit |
| Max Clock Frequency | 24 MHz | 24 MHz | 24 MHz | 24 MHz | 24 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 64 KB | 16 KB |
| SRAM | 2 KB | 2 KB | 2 KB | 2 KB | 256 B |
| GPIO Count | 24 | 24 | 24 | 24 | 24 |
| Programmable Analog Blocks | 12 | 12 | 12 | 12 | 12 |
| Temperature Grade | Commercial (A-grade) | Industrial (I-grade) | Industrial (I-grade) | Commercial (A-grade) | Industrial (I-grade) |
| Lifecycle | Last-time-buy | Last-time-buy | Last-time-buy | Last-time-buy | Active (in Site MPN list) |
主な差別化要因
- 32 KB Flash in 28-SSOP with 12 programmable analog blocks （vs CY8C27443-24PVXIT)
- Identical footprint upgrade path to 64 KB Flash （vs CY8C29666-24PVXA)
- PSoC1 configurable architecture replaces external analog parts （vs Fixed-function 8-bit MCU families)
設計ノート
Place a 0.1 µF ceramic decoupling capacitor as close as possible to each VDD/VSS pair on the CY8C29466-24PVXA, with a 10 µF bulk capacitor at the regulator output. The PSoC1 CY8C29xxx family datasheet specifies 5 V ±10% supply tolerance; using a low-noise LDO such as TPS7A4701 downstream of a switching pre-regulator avoids injecting PSoC analog reference noise. Estimated: with all digital blocks idle the device draws roughly 4-6 mA at 24 MHz; full-load with all 12 analog blocks active can approach 25 mA.
Route analog and digital PSoC blocks on separate copper pours where possible, joining analog and digital grounds at a single point near the VSS pin. Keep the XRES pull-up resistor within 5 mm of pin 27 and isolate the ISSP SDATA and SCLK traces to prevent programming contention. Place the external Vref bypass capacitor adjacent to pin 6 (P0[2]) when using the internal analog reference. Estimated trace length < 25 mm for analog blocks reduces digital coupling.
Do not drive PSoC block outputs to contention during reset; the CY8C29xxx datasheet requires GPIO initialization in firmware before peripheral activation to prevent bus conflicts on the analog/digital interconnect array. Verify the operating temperature grade - the 'A' suffix in CY8C29466-24PVXA denotes commercial temperature; industrial temperature applications must select the I-grade CY8C29466-24PVXI variant. ISSP programming requires SDATA and SCLK to be free of external pull-downs during reset.
コンプライアンス情報
RoHS/REACH compliance inferred from the 'X' suffix in the order code per Infineon/Cypress part numbering convention; AEC-Q100 not applicable for general-purpose 8-bit MCU. Verify latest compliance documentation with Infineon at order placement.
