CY8C29566-24AXI - 24MHz 8-Bit PSoC 1 MCU | Infineon
部品番号: CY8C29566-24AXI ✓ 生産中CY8C29566-24AXI 概要
A PSoC, or Programmable System-on-Chip, is a microcontroller architecture that integrates a CPU with configurable analog and digital peripheral blocks. PSoC 1 belongs to the 8-bit microcontroller hierarchy, using the M8C instruction set to combine deterministic embedded control with programmable signal conditioning, timers, communication interfaces, and general-purpose I/O. This integration can reduce the number of discrete components required in compact control systems.
The CY8C29566-24AXI provides 32 KB of flash for firmware, 2 KB of SRAM for working data, and 16 programmable digital blocks according to the manufacturer documentation. Its 40 I/O pins support connections to sensors, actuators, displays, and communications equipment. A maximum operating voltage of 5.25 V and a minimum operating voltage of 3 V allow use in both 3.3 V and 5 V system designs when individual peripheral and I/O constraints are satisfied.
The M8C CPU is designed for low-power operation at high speed, while the PSoC peripheral structure allows analog and digital functions to be configured in firmware. This configurability is valuable when a product needs mixed-signal measurement, flexible timing, or dedicated interface logic without loading the CPU with repetitive low-level control tasks. The manufacturer identifies the device as part of the CY8C29xxx PSoC 1 family.
Typical uses include industrial sensor controllers, building automation modules, compact instrumentation, programmable control panels, and communication equipment. The 40-I/O capability is particularly useful for designs that must connect multiple digital inputs and outputs while retaining an embedded MCU and configurable peripheral resources in one package.
PCB planning should account for the 44-TQFP lead pitch and route sensitive analog inputs away from switching nodes and high-current return paths. Firmware development should use the configuration and programming tools specified for the PSoC 1 family. Verify all peripheral, clock, and I/O operating conditions against the manufacturer datasheet before releasing a production design.
This page combines the key MCU resources, package information, practical application guidance, replacement constraints, and design considerations engineers need when evaluating the CY8C29566-24AXI for a mixed-signal embedded-control design.
ドロップイン代替品: CY8C29566-24AXI — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストCY8C29566-24AXI 最大定格&電気的特性
| Product Type | 8-bit PSoC 1 microcontroller |
| CPU Architecture | M8C 8-bit architecture |
| Maximum CPU Frequency | 24 MHz |
| Flash Memory | 32 KB |
| Flash Organization | 32K x 8 bits |
| SRAM | 2 KB |
| General-Purpose I/O Pins | 40 pins |
| Programmable Digital Blocks | 16 blocks |
| Minimum Operating Voltage | 3 V |
| Maximum Operating Voltage | 5.25 V |
| パッケージ | 44-TQFP, 10 mm x 10 mm |
| 実装タイプ | Surface mount |
| Product Family | PSoC 1 CY8C29xxx |
| Architecture | Configurable analog and digital peripherals |
CY8C29566-24AXI 44-tqfp, 10 mm x 10 mm ピン配置ガイド
CY8C29566-24AXI (44-tqfp, 10 mm x 10 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: CY8C29566-24AXI.
詳細は データシート をご参照ください。
主な用途
CY8C29566-24AXI の用途: 6 件s: Industrial Sensor Controllers, Building Automation Modules, Compact Instrumentation, Communication Equipment, Programmable Control Panels, Low-Power Embedded Products.
Industrial Sensor Controllers
The CY8C29566-24AXI fits industrial sensor-controller designs that need flexible I/O and configurable control logic in a compact package. Its 24 MHz M8C CPU can execute acquisition logic and supervisory tasks, while 40 I/O pins provide connections for digital sensors, alarm inputs, indicators, and actuator commands. Sixteen programmable digital blocks can implement timing and deterministic routing functions close to the I/O structure. Operating from 3 V to 5.25 V permits use in common industrial control voltage ranges, although each sensor interface must be checked against the appropriate I/O and analog limits. The 32 KB flash and 2 KB SRAM are suitable for moderate firmware sizes, provided the final application build and interrupt requirements remain within those resources.
おすすめ
Building Automation Modules
The CY8C29566-24AXI is well suited to compact building-automation modules that coordinate inputs from occupancy, light, temperature, and door sensors. The 40 available I/O pins reduce the need for a separate multiplexing hierarchy, while the programmable digital blocks can support repeated sampling and timing sequences. Its 3 V to 5.25 V operating range fits common low-voltage control boards. The PSoC 1 configuration approach can place dedicated peripheral functions close to their associated pins, improving implementation clarity for mixed analog and digital boards. Firmware partitioning should reserve SRAM for protocol buffers and scheduling data, while the 32 KB flash capacity must be checked against application code, configuration tables, bootloader functions, and future field-upgrade requirements.
おすすめ
Compact Instrumentation
The CY8C29566-24AXI can serve as the embedded controller in compact instrumentation where measurement control, calibration handling, and local display or communications must share one microcontroller. Its M8C CPU operates at up to 24 MHz, providing deterministic control alongside 32 KB of program storage and 2 KB of SRAM. Sixteen programmable digital blocks add flexible timing and routing resources, while the 40-pin I/O complement can connect displays, buttons, indicators, and external converters. Because the device is designed around configurable PSoC 1 resources, the same silicon family can support multiple peripheral arrangements. Engineers should establish the analog signal path and noise budget separately, and verify the pin functions, impedance expectations, and acquisition timing required by the instrument before assigning the PSoC blocks.
おすすめ
Communication Equipment
The CY8C29566-24AXI is applicable to communication equipment that needs local control alongside a network interface. The 40 I/O pins can support status indicators, configuration switches, handshake signals, and monitoring inputs, while the programmable digital blocks provide configurable timing around serial activity. Its 24 MHz M8C CPU can manage protocol state, diagnostics, and configuration storage within the available 32 KB flash and 2 KB SRAM. The 3 V to 5.25 V supply range supports common interface-board architectures, provided the selected transceiver levels are reconciled with the I/O bank. For EMC-sensitive or high-speed links, maintain controlled return paths and place protection components close to connector entry points. The data-sheet pin table remains the controlling reference for assigning communication functions.
おすすめ
Programmable Control Panels
The CY8C29566-24AXI fits programmable control panels that combine buttons, LEDs, displays, relays, and communication interfaces. Its 40 I/O pins provide substantial panel connectivity, and 16 programmable digital blocks can support repeatable scanning, debouncing, or timing functions. The 24 MHz M8C processor supports menu logic, state management, and communication tasks, while 2 KB of SRAM can hold transient display and input data. The 32 KB flash footprint must be evaluated against UI code, configuration data, communication stacks, and update requirements. For low-power standby operation, the firmware should disable unused PSoC blocks and external circuitry deliberately rather than assuming every configured block remains active. The 3 V to 5.25 V supply range accommodates common panel rails when indicator and driver designs are matched to the chosen operating voltage.
おすすめ
Low-Power Embedded Products
The CY8C29566-24AXI supports low-power embedded products that combine an 8-bit control engine with programmable peripheral resources. Its M8C architecture is intended to provide low-power operation at high speed, allowing sleep modes to be combined with short active processing intervals. The 32 KB flash can retain firmware and configuration across power cycles, while the PSoC 1 configurable blocks can reduce discrete circuitry for sensing, switching, and timing. The 40 I/O pins also allow low-power sensors and indicators to share the controller. Energy performance depends on the selected clock configuration, active blocks, I/O states, and external pull networks, so developers should measure the complete board rather than relying on CPU frequency alone. A power-aware design should disable unused peripherals and document the state of every externally driven pin during sleep.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: CY8C29566-24AXI — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Package | 44-TQFP, 10 mm x 10 mm |
| Brand | Infineon Technologies |
| CPU Architecture | 8-bit M8C |
| Maximum CPU Frequency | 24 MHz |
| Flash Memory | 32 KB |
| SRAM | 2 KB |
| General-Purpose I/O Pins | 40 pins |
| Programmable Digital Blocks | 16 blocks |
| Operating Voltage Range | 3 V to 5.25 V |
| Product Family | PSoC 1 CY8C29xxx |
主な差別化要因
- Substantial I/O capacity for a compact embedded controller (vs ATMEGA48PA-MN)
- Configurable analog and digital peripheral integration (vs ATMEGA1609-MF)
- Higher clock speed within the 8-bit embedded-control class (vs ATTINY44A-MFR)
設計ノート
Assign the 44-TQFP footprint and pin functions directly from the Infineon package drawing and pin-description table. Place decoupling and bulk-supply connections using the manufacturer layout guidance, keeping supply and ground loops compact. Route the 40 I/O signals according to their intended peripheral functions, and avoid placing high-current switching paths beneath sensitive analog or communication inputs.
Separate analog, digital, and communication returns carefully because the PSoC architecture combines configurable analog and digital blocks in one device. Establish quiet analog ground routing before assigning board layers, and keep clock, sensor, and serial interfaces away from switching-node copper. Validate timing and signal levels against the relevant datasheet conditions; the 3 V to 5.25 V supply range alone does not guarantee every I/O bank can operate at 5 V.
Do not treat a related CY8C2xxx part as a drop-in substitute solely because it uses a similar suffix and package family. Confirm lead numbering, exposed functionality, memory capacity, peripheral availability, programming configuration, and ordering temperature grade. Also verify the final build against the 32 KB flash and 2 KB SRAM limits, including boot code, configuration data, stack headroom, and update mechanisms.
Create a power budget from the selected clock speed, active PSoC blocks, I/O activity, and external loads instead of estimating consumption from the 24 MHz maximum alone. Confirm the minimum and maximum operating voltages and any peripheral-specific limits in the manufacturer datasheet. For battery-powered products, explicitly control unused block clocks and external pull states so that low-power behavior remains predictable.
コンプライアンス情報
The manufacturer product page and listing data do not explicitly state the requested compliance statuses. Confirm RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals declarations for the exact ordering code before production release.