Infineon

CY8C29566-24AXI - 24MHz 8-Bit PSoC 1 MCU | Infineon

料号: CY8C29566-24AXI ✓ 量产中
3 V Vdss 44-TQFP, 10 mm x 10 mm Package 24 MHz Speed 32 KB Memory
最小起订量: 1 |

CY8C29566-24AXI 概述

The Infineon Technologies CY8C29566-24AXI is an 8-bit M8C PSoC 1 microcontroller operating at 24 MHz, with 32 KB of flash memory, 2 KB of SRAM, and 40 I/O pins in a 44-TQFP package measuring 10 mm by 10 mm. It combines a configurable embedded mixed-signal architecture with a 3 V to 5.25 V operating range.

A PSoC, or Programmable System-on-Chip, is a microcontroller architecture that integrates a CPU with configurable analog and digital peripheral blocks. PSoC 1 belongs to the 8-bit microcontroller hierarchy, using the M8C instruction set to combine deterministic embedded control with programmable signal conditioning, timers, communication interfaces, and general-purpose I/O. This integration can reduce the number of discrete components required in compact control systems.

The CY8C29566-24AXI provides 32 KB of flash for firmware, 2 KB of SRAM for working data, and 16 programmable digital blocks according to the manufacturer documentation. Its 40 I/O pins support connections to sensors, actuators, displays, and communications equipment. A maximum operating voltage of 5.25 V and a minimum operating voltage of 3 V allow use in both 3.3 V and 5 V system designs when individual peripheral and I/O constraints are satisfied.

The M8C CPU is designed for low-power operation at high speed, while the PSoC peripheral structure allows analog and digital functions to be configured in firmware. This configurability is valuable when a product needs mixed-signal measurement, flexible timing, or dedicated interface logic without loading the CPU with repetitive low-level control tasks. The manufacturer identifies the device as part of the CY8C29xxx PSoC 1 family.

Typical uses include industrial sensor controllers, building automation modules, compact instrumentation, programmable control panels, and communication equipment. The 40-I/O capability is particularly useful for designs that must connect multiple digital inputs and outputs while retaining an embedded MCU and configurable peripheral resources in one package.

PCB planning should account for the 44-TQFP lead pitch and route sensitive analog inputs away from switching nodes and high-current return paths. Firmware development should use the configuration and programming tools specified for the PSoC 1 family. Verify all peripheral, clock, and I/O operating conditions against the manufacturer datasheet before releasing a production design.

This page combines the key MCU resources, package information, practical application guidance, replacement constraints, and design considerations engineers need when evaluating the CY8C29566-24AXI for a mixed-signal embedded-control design.

直接替换替代料: CY8C29566-24AXI ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

CY8C29566-24AXI 最大额定值与电气特性

Product Type 8-bit PSoC 1 microcontroller
CPU Architecture M8C 8-bit architecture
Maximum CPU Frequency 24 MHz
Flash Memory 32 KB
Flash Organization 32K x 8 bits
SRAM 2 KB
General-Purpose I/O Pins 40 pins
Programmable Digital Blocks 16 blocks
Minimum Operating Voltage 3 V
Maximum Operating Voltage 5.25 V
封装 44-TQFP, 10 mm x 10 mm
安装类型 Surface mount
Product Family PSoC 1 CY8C29xxx
Architecture Configurable analog and digital peripherals

CY8C29566-24AXI 44-tqfp, 10 mm x 10 mm 引脚配置指南

CY8C29566-24AXI(44-tqfp, 10 mm x 10 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

CY8C29566-24AXI 的 44-tqfp, 10 mm x 10 mm 封装引脚图

暂无详细引脚数据: CY8C29566-24AXI.

请参阅 数据手册 以查看完整引脚配置。

典型应用

CY8C29566-24AXI 适用于 6 应用s: Industrial Sensor Controllers, Building Automation Modules, Compact Instrumentation, Communication Equipment, Programmable Control Panels, Low-Power Embedded Products.

🏭

Industrial Sensor Controllers

The CY8C29566-24AXI fits industrial sensor-controller designs that need flexible I/O and configurable control logic in a compact package. Its 24 MHz M8C CPU can execute acquisition logic and supervisory tasks, while 40 I/O pins provide connections for digital sensors, alarm inputs, indicators, and actuator commands. Sixteen programmable digital blocks can implement timing and deterministic routing functions close to the I/O structure. Operating from 3 V to 5.25 V permits use in common industrial control voltage ranges, although each sensor interface must be checked against the appropriate I/O and analog limits. The 32 KB flash and 2 KB SRAM are suitable for moderate firmware sizes, provided the final application build and interrupt requirements remain within those resources.

🏠

Building Automation Modules

The CY8C29566-24AXI is well suited to compact building-automation modules that coordinate inputs from occupancy, light, temperature, and door sensors. The 40 available I/O pins reduce the need for a separate multiplexing hierarchy, while the programmable digital blocks can support repeated sampling and timing sequences. Its 3 V to 5.25 V operating range fits common low-voltage control boards. The PSoC 1 configuration approach can place dedicated peripheral functions close to their associated pins, improving implementation clarity for mixed analog and digital boards. Firmware partitioning should reserve SRAM for protocol buffers and scheduling data, while the 32 KB flash capacity must be checked against application code, configuration tables, bootloader functions, and future field-upgrade requirements.

🔧

Compact Instrumentation

The CY8C29566-24AXI can serve as the embedded controller in compact instrumentation where measurement control, calibration handling, and local display or communications must share one microcontroller. Its M8C CPU operates at up to 24 MHz, providing deterministic control alongside 32 KB of program storage and 2 KB of SRAM. Sixteen programmable digital blocks add flexible timing and routing resources, while the 40-pin I/O complement can connect displays, buttons, indicators, and external converters. Because the device is designed around configurable PSoC 1 resources, the same silicon family can support multiple peripheral arrangements. Engineers should establish the analog signal path and noise budget separately, and verify the pin functions, impedance expectations, and acquisition timing required by the instrument before assigning the PSoC blocks.

🌐

Communication Equipment

The CY8C29566-24AXI is applicable to communication equipment that needs local control alongside a network interface. The 40 I/O pins can support status indicators, configuration switches, handshake signals, and monitoring inputs, while the programmable digital blocks provide configurable timing around serial activity. Its 24 MHz M8C CPU can manage protocol state, diagnostics, and configuration storage within the available 32 KB flash and 2 KB SRAM. The 3 V to 5.25 V supply range supports common interface-board architectures, provided the selected transceiver levels are reconciled with the I/O bank. For EMC-sensitive or high-speed links, maintain controlled return paths and place protection components close to connector entry points. The data-sheet pin table remains the controlling reference for assigning communication functions.

🎛️

Programmable Control Panels

The CY8C29566-24AXI fits programmable control panels that combine buttons, LEDs, displays, relays, and communication interfaces. Its 40 I/O pins provide substantial panel connectivity, and 16 programmable digital blocks can support repeatable scanning, debouncing, or timing functions. The 24 MHz M8C processor supports menu logic, state management, and communication tasks, while 2 KB of SRAM can hold transient display and input data. The 32 KB flash footprint must be evaluated against UI code, configuration data, communication stacks, and update requirements. For low-power standby operation, the firmware should disable unused PSoC blocks and external circuitry deliberately rather than assuming every configured block remains active. The 3 V to 5.25 V supply range accommodates common panel rails when indicator and driver designs are matched to the chosen operating voltage.

🔋

Low-Power Embedded Products

The CY8C29566-24AXI supports low-power embedded products that combine an 8-bit control engine with programmable peripheral resources. Its M8C architecture is intended to provide low-power operation at high speed, allowing sleep modes to be combined with short active processing intervals. The 32 KB flash can retain firmware and configuration across power cycles, while the PSoC 1 configurable blocks can reduce discrete circuitry for sensing, switching, and timing. The 40 I/O pins also allow low-power sensors and indicators to share the controller. Energy performance depends on the selected clock configuration, active blocks, I/O states, and external pull networks, so developers should measure the complete board rather than relying on CPU frequency alone. A power-aware design should disable unused peripherals and document the state of every externally driven pin during sleep.

What are the key specifications of CY8C29566-24AXI that engineers should know?
The CY8C29566-24AXI is an 8-bit PSoC 1 microcontroller with a 24 MHz M8C CPU, 32 KB of flash, 2 KB of SRAM, 40 I/O pins, and 16 programmable digital blocks. According to the Infineon manufacturer datasheet, it operates from 3 V to 5.25 V and is packaged in a 44-TQFP measuring 10 mm by 10 mm. These resources position it for compact embedded-control and configurable mixed-signal systems.
What is the operating voltage of CY8C29566-24AXI?
The CY8C29566-24AXI operates from 3 V to 5.25 V, with the maximum operating voltage identified as 5.25 V in the manufacturer datasheet. This range supports 3.3 V and 5 V system architectures, but the complete design must also satisfy the voltage limits of individual PSoC blocks, I/O pins, and external circuitry. Confirm signal-level compatibility before connecting 5 V peripherals to the I/O bank.
How much flash and SRAM does the CY8C29566-24AXI have?
The CY8C29566-24AXI contains 32 KB of flash memory organized as 32K by 8 bits and 2 KB of SRAM. The manufacturer product page and datasheet identify the same memory configuration. The flash stores the application firmware and configuration data, while SRAM provides volatile working memory for stack operations, buffers, variables, and real-time control functions.
Where can I download the CY8C29566-24AXI datasheet PDF?
The official CY8C29566-24AXI datasheet and product resources are available through the Infineon part page at https://www.infineon.com/part/CY8C29566-24AXI. The manufacturer page provides the authoritative ordering information, parameters, and technical documentation. Use the pin-description table and electrical-characteristics sections there when assigning package connections and validating operating limits.
Where can I find the CY8C29566-24AXI pinout?
The CY8C29566-24AXI pinout is documented in the Infineon manufacturer datasheet for the 44-TQFP package. Use the package drawing and pin-description table to map all 44 leads, power pins, ground connections, and special-function pins onto the PCB. Because the product combines analog, digital, and communication functions, assign pins from the datasheet rather than relying on a generic 44-TQFP outline.
What can replace the CY8C29566-24AXI?
A true drop-in replacement for the CY8C29566-24AXI must use the same 44-TQFP footprint, preserve pin-to-pin signal assignments, and provide compatible memory, I/O, voltage, and peripheral functions. No verified same-package drop-in replacement was identified for this exact ordering code. A related PSoC 1 device should be treated as a redesign candidate unless Infineon confirms pin compatibility and the original firmware configuration remains valid.
Is the CY8C29566-24AXI the same as the CY8C22545-24AXI?
No. The CY8C29566-24AXI belongs to the CY8C29xxx PSoC 1 family and provides a 24 MHz M8C CPU, 32 KB of flash, 2 KB of SRAM, and 40 I/O pins. The CY8C22545-24AXI is a different PSoC 1 member with a different resource configuration. The comparison must be checked against each device's datasheet, and the different family member should not be assumed to be pin-compatible.
When should I choose the CY8C29566-24AXI for an embedded-control design?
Choose the CY8C29566-24AXI when a design needs an 8-bit embedded controller, 32 KB of flash, 2 KB of SRAM, and as many as 40 I/O pins in one package. Its configurable analog and digital peripheral blocks are useful when flexible signal routing, timers, or programmable control functions would otherwise require several discrete devices. It is less suitable when a product requires a different pinout or substantially more memory without redesign.
Is CY8C29566-24AXI suitable for industrial sensor control?
The CY8C29566-24AXI is suitable for many industrial sensor-control designs because it combines a 24 MHz M8C CPU, configurable peripheral blocks, 40 I/O pins, and a 3 V to 5.25 V operating range. Its 16 programmable digital blocks can support deterministic I/O and timing tasks. Confirm temperature grade, analog accuracy, watchdog behavior, and long-term availability against the exact design requirements before production release.
Where to buy CY8C29566-24AXI online?
Use the Request a Quote form on this page to request CY8C29566-24AXI pricing, stock, and lead time from XAIPART. The exact ordering code is listed as an M8C PSoC 1 CY8C29xxx microcontroller with 32 KB of flash and a 44-TQFP package. Include your required quantity, packaging preference, and target delivery date so the quotation can be matched to your production requirements.
What is the price of CY8C29566-24AXI?
The current commercial price for CY8C29566-24AXI should be requested through the Request a Quote form on this page. Pricing depends on order quantity, inventory, delivery schedule, and packaging requirements, so a static figure may not reflect a purchasable quantity. Provide the required quantity and destination when submitting the request for a current quotation.
What is the lead time and stock status for CY8C29566-24AXI?
The current stock and lead time for CY8C29566-24AXI should be confirmed through the Request a Quote form on this page. The manufacturer part page lists the exact 44-TQFP ordering code, while distributor listings may change inventory from one transaction to another. Include your required quantity, production date, and acceptable delivery window to obtain an actionable availability response.
How much power does the CY8C29566-24AXI consume?
The manufacturer datasheet should be used to determine the operating current and power consumption of the CY8C29566-24AXI for the selected clock, I/O activity, and peripheral configuration. The exact current draw is not listed in the product summary, and it can vary with active blocks and operating mode. Avoid estimating a design budget from the 24 MHz CPU frequency alone; review the relevant datasheet operating-condition tables.
Which programming tools are compatible with CY8C29566-24AXI?
The CY8C29566-24AXI is programmed and configured as part of the PSoC 1 family using Infineon's PSoC development environment. The exact tool release, programming cable, and supported device-pack entry should be selected from the current Cypress or Infineon PSoC Creator guidance. Confirm that the installed device pack includes CY8C29566-24AXI before committing a production programming procedure.
What is the best drop-in replacement for CY8C29566-24AXI?
The best drop-in replacement is the device that preserves the 44-TQFP footprint, pin numbering, electrical limits, memory organization, and required peripheral resources. No verified part meeting all of those conditions was identified for the exact CY8C29566-24AXI ordering code. Do not substitute a related PSoC 1 MPN solely because its suffix resembles the target; first confirm pin compatibility, bootloader behavior, configuration, and firmware impact.

工程参考数据: CY8C29566-24AXI ——对比、设计指导和合规信息。

选型指南

Choose the CY8C29566-24AXI when the design needs a 24 MHz 8-bit controller with 32 KB of flash, 2 KB of SRAM, 40 I/O pins, and programmable PSoC 1 resources in a 44-TQFP package. It is especially useful when configurable timing, routing, and mixed-signal functions can replace several discrete components. A basic ATtiny-family device may be sufficient for simple control, while an ATmega-family device may suit designs centered on a conventional fixed-peripheral MCU architecture. The CY8C22545-24AXI belongs to a different PSoC 1 resource group and should not be selected as a replacement without a detailed pin and firmware review. No verified drop-in alternatives were identified, so a second-source strategy normally requires a planned redesign or manufacturer confirmation of a compatible ordering code.

与替代料对比

参数 本产品
Package 44-TQFP, 10 mm x 10 mm
Brand Infineon Technologies
CPU Architecture 8-bit M8C
Maximum CPU Frequency 24 MHz
Flash Memory 32 KB
SRAM 2 KB
General-Purpose I/O Pins 40 pins
Programmable Digital Blocks 16 blocks
Operating Voltage Range 3 V to 5.25 V
Product Family PSoC 1 CY8C29xxx

关键差异点

  • Substantial I/O capacity for a compact embedded controller (对比 ATMEGA48PA-MN)
  • Configurable analog and digital peripheral integration (对比 ATMEGA1609-MF)
  • Higher clock speed within the 8-bit embedded-control class (对比 ATTINY44A-MFR)

设计说明

Assign the 44-TQFP footprint and pin functions directly from the Infineon package drawing and pin-description table. Place decoupling and bulk-supply connections using the manufacturer layout guidance, keeping supply and ground loops compact. Route the 40 I/O signals according to their intended peripheral functions, and avoid placing high-current switching paths beneath sensitive analog or communication inputs.

Separate analog, digital, and communication returns carefully because the PSoC architecture combines configurable analog and digital blocks in one device. Establish quiet analog ground routing before assigning board layers, and keep clock, sensor, and serial interfaces away from switching-node copper. Validate timing and signal levels against the relevant datasheet conditions; the 3 V to 5.25 V supply range alone does not guarantee every I/O bank can operate at 5 V.

Do not treat a related CY8C2xxx part as a drop-in substitute solely because it uses a similar suffix and package family. Confirm lead numbering, exposed functionality, memory capacity, peripheral availability, programming configuration, and ordering temperature grade. Also verify the final build against the 32 KB flash and 2 KB SRAM limits, including boot code, configuration data, stack headroom, and update mechanisms.

Create a power budget from the selected clock speed, active PSoC blocks, I/O activity, and external loads instead of estimating consumption from the 24 MHz maximum alone. Confirm the minimum and maximum operating voltages and any peripheral-specific limits in the manufacturer datasheet. For battery-powered products, explicitly control unused block clocks and external pull states so that low-power behavior remains predictable.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer product page and listing data do not explicitly state the requested compliance statuses. Confirm RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals declarations for the exact ordering code before production release.

相关搜索

cy8c29566 datasheet CY8C29566-24AXI datasheet CY8C29566-24AXI pinout CY8C29566-24AXI specifications CY8C29566-24AXI 44-TQFP CY8C29566-24AXI replacement CY8C29566-24AXI equivalent CY8C29566-24AXI cross reference Infineon CY8C29566-24AXI CY8C29566-24AXI price CY8C29566-24AXI stock CY8C29566-24AXI programming

相关元器件 & 术语

Infineon Technologies Cypress Semiconductor CY8C29566-24AXI CY8C22545-24AXI PSoC 1 M8C CPU 8-bit microcontroller microcontroller embedded control semiconductor Programmable System-on-Chip configurable analog peripheral configurable digital peripheral 32 KB flash memory 2 KB SRAM 40 I/O pins 24 MHz 3 V to 5.25 V 44-TQFP TQFP package family surface-mount package industrial sensor control building automation compact instrumentation
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情