CY8C3444LTI-114 - 8-Bit 50MHz PSoC 3 MCU | Infineon
部品番号: CY8C3444LTI-114 ✓ 生産中CY8C3444LTI-114 概要
A PSoC, or programmable system-on-chip, is a mixed-signal microcontroller that integrates a CPU, programmable analog and digital peripherals, memory, and routing resources on one die. Unlike a fixed-function MCU, the CY8C3 family allows designers to configure peripheral behavior and signal routing in firmware, reducing the need for discrete external components and consolidating analog control with digital logic.
The CY8C3444LTI-114 provides up to 50 MHz CPU operation, 16 kByte of flash, and 2 kByte of SRAM. Its configurable blocks support analog functions such as analog-to-digital conversion, digital-to-analog conversion, comparators, and timers, while digital blocks can implement counters, serial communication, and programmable logic. The 68-VFQFN package also includes an exposed thermal pad for improved heat removal.
The CY8C3 architecture provides a unified development approach in which firmware configures analog routing, interrupt behavior, and digital peripherals. This makes the device especially useful for sensor interfaces, industrial control panels, building controls, and low-power measurement systems where analog signal conditioning and microcontroller processing must coexist on a compact board.
Typical uses include temperature and environmental sensing, touch-controlled interfaces, motor and actuator control, low-power industrial nodes, and compact test instruments. Designers should preserve the exposed-pad copper area, follow the recommended decoupling layout, and confirm the device-specific operating limits against the Cypress PSoC 3 CY8C34 Family Data Sheet.
When designing the PCB, connect the exposed pad to the ground plane with thermal vias and place input and output capacitors close to their associated pins. Validate startup behavior, brownout settings, clock configuration, and unused-pin states in firmware because the exposed pad and analog supply pins have defined electrical requirements.
This page combines package, memory, processor, and cross-reference information with practical PCB guidance for engineers evaluating the CY8C3444LTI-114 in new PSoC 3 designs. It also identifies the closest documented same-family option and explains where a confirmed drop-in replacement has not been established.
ドロップイン代替品: CY8C3444LTI-114 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: CY8C3444LTI-114 (同一形状・フットプリント) — 相違点: Package.
CY8C3444LTI-111
✅ ドロップイン価格はお問い合わせください
データシートを見る →CY8C3444LTI-114 最大定格&電気的特性
| Device Type | 8-bit Flash Programmable System-on-Chip (PSoC 3) |
| CPU Architecture | 8051, up to 50 MHz |
| CPU Speed | 50 MHz maximum |
| Flash Memory | 16 kByte |
| SRAM | 2 kByte |
| パッケージ | 68-VFQFN with exposed pad |
| Programmable Architecture | Configurable analog and digital blocks with signal routing |
| Power Class | Ultra-low-power PSoC 3 device |
| 実装タイプ | Surface mount |
CY8C3444LTI-114 68-vfqfn with exposed pad ピン配置ガイド
CY8C3444LTI-114 (68-vfqfn with exposed pad パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: CY8C3444LTI-114.
詳細は データシート をご参照ください。
主な用途
CY8C3444LTI-114 の用途: 6 件s: Low-Power Environmental Sensing, Industrial Control Panel, Touch and Capacitive Sensing Interface, Actuator and Motor Control Node, Compact Test and Measurement Instrument, Building Automation and HVAC Control.
Low-Power Environmental Sensing
The CY8C3444LTI-114 fits distributed environmental sensing because its PSoC 3 architecture places configurable analog and digital functions beside an 8-bit CPU running up to 50 MHz. A design can use configurable analog blocks for sensor conditioning and digital blocks for sampling control while the 16 kByte flash holds application firmware and 2 kByte of SRAM supports working data. The 68-VFQFN package keeps the assembly compact but requires a land pattern that connects its exposed pad to the ground plane. For battery-operated nodes, select the lowest-power operating mode supported by the device configuration and account for the sensor, regulator, and any wireless interface when calculating the complete energy budget.
おすすめ
Industrial Control Panel
For a compact industrial control panel, the CY8C3444LTI-114 can combine input conditioning, control logic, and output handling in one programmable device. Its 50 MHz 8051 core provides deterministic control-loop execution, while configurable digital blocks can implement counters, timing, and serial interface functions. The 16 kByte flash and 2 kByte SRAM are appropriate for protocol handling and local state when the application does not require a large user interface or extensive data logging. Keep the exposed-pad grounding and analog trace routing consistent with the manufacturer package guidelines to prevent ground-current coupling from degrading measurement accuracy.
おすすめ
Touch and Capacitive Sensing Interface
The CY8C3444LTI-114 is suitable for touch and capacitive sensing interfaces because PSoC 3 devices combine configurable analog sensing resources with programmable digital control. The analog section can handle the sensing element and conditioning while the 8051 CPU running up to 50 MHz performs filtering, debouncing, and interface updates. Using configurable blocks can reduce the external component count compared with a fixed-function MCU design, although final performance depends on the selected analog configuration and PCB construction. Route sensor electrodes away from switching and high-current traces, maintain a stable ground reference under the analog section, and follow the exposed-pad thermal-via pattern specified for the 68-VFQFN package.
おすすめ
Actuator and Motor Control Node
The CY8C3444LTI-114 can serve as the control node for small actuators, relays, or motor-control subsystems where timing, sensing, and digital logic must coexist. The 50 MHz CPU supports responsive control calculations, while configurable timer and digital resources can implement pulse generation, fault counting, and input synchronization. Its 16 kByte of flash is useful for compact control firmware, and the 2 kByte SRAM can hold state and communication buffers. Separate sensitive analog and power-return paths from actuator drive traces to limit noise coupling, and confirm that the device supply remains within its specified limits during switching events.
おすすめ
Compact Test and Measurement Instrument
A compact test instrument can use the CY8C3444LTI-114 to consolidate measurement conditioning, signal processing, and control functions. The configurable analog blocks support adaptable acquisition paths, while the 50 MHz 8051 core performs scaling, filtering, and calibration in firmware. The 16 kByte flash and 2 kByte SRAM suit lightweight instruments with local calibration data and short measurement sequences. Place analog input traces away from digital switching nodes, reference the analog section to a continuous ground plane, and use the exposed pad as both the package thermal path and the specified electrical connection. Validate input impedance and settling behavior against the selected analog-block configuration.
おすすめ
Building Automation and HVAC Control
The CY8C3444LTI-114 is appropriate for building-automation endpoints that combine temperature or occupancy sensing with relay, alarm, or communication functions. The programmable system-on-chip architecture lets firmware configure analog measurement channels and digital control blocks without relying on a fixed peripheral map, while the 8-bit CPU handles local decisions. The 50 MHz operating capability supports time-critical control tasks, and the compact 68-VFQFN package assists space-constrained sensor nodes. Use the manufacturer package drawing for the exposed-pad land pattern, provide multiple ground vias, and isolate long field-wired inputs from sensitive analog traces to improve robustness in electrically noisy environments.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: CY8C3444LTI-114 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | CY8C3444LTI-111 |
|---|---|---|
| Manufacturer Brand | Infineon | Infineon |
| Package | 68-VFQFN with exposed pad | 68-VFQFN with exposed pad |
| Device Type | 8-bit PSoC 3 Flash Programmable System-on-Chip | 8-bit PSoC 3 Flash Programmable System-on-Chip |
| CPU Speed | Up to 50 MHz | Up to 50 MHz |
| Flash Memory | 16 kByte | 16 kByte |
| SRAM | 2 kByte | 2 kByte |
| Programmable Blocks | Configurable analog and digital blocks | Configurable analog and digital blocks |
| Exposed Pad | Present | Present |
主な差別化要因
- Documented pin-compatible family replacement (vs CY8C3444LTI-111)
- Configurable mixed-signal integration (vs CY8C3444LTI-111)
- Compact exposed-pad package (vs CY8C3444LTI-109)
設計ノート
Use the manufacturer package drawing for the 68-VFQFN land pattern and exposed-pad connection. The pad should tie to the specified ground connection through multiple thermal vias, while retaining adequate solder-mask clearance where required by the assembly process. Keep decoupling components close to the associated supply pins and provide a continuous ground reference beneath the device. A compact land pattern without adequate thermal-via density can increase junction temperature and degrade analog performance.
Separate analog input paths from digital switching, clock, and actuator-drive traces. Route sensitive measurements over a quiet ground region, keep the analog ground and exposed-pad connection compatible with the device recommendation, and avoid sharing narrow return paths with pulsed loads. PSoC routing resources determine internal analog-to-digital paths, but they cannot compensate for poor PCB coupling. Review both internal routing and physical trace geometry when configuring high-impedance sensors.
Do not assume that all CY8C3444 variants are interchangeable merely because their flash and SRAM sizes match. Confirm the package, temperature grade, ordering suffix, device configuration, and exposed-pad requirements in the ordering table. The CY8C3444LTI-111 is a documented same-package replacement candidate, while the CY8C3444LTI-109 uses a 48-QFN package and is therefore not pin-compatible with the 68-VFQFN target.
Calculate the complete system power budget using the operating mode selected for the target configuration rather than a single generic current value. Include analog blocks, digital peripherals, external sensors, regulators, and communication hardware. Review brownout and supply sequencing behavior in firmware, and verify that transient loading from actuators cannot pull the local supply outside its permitted range. This guidance supports design planning but does not replace the electrical limits published in the device data sheet.
コンプライアンス情報
Compliance status was not stated in the available product information. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification statements against the current manufacturer product documentation and the exact ordering code.