Infineon

CY8C3444LTI-114 - 8-Bit 50MHz PSoC 3 MCU | Infineon

Teilenummer: CY8C3444LTI-114 ✓ Aktiv
68-VFQFN with exposed pad Package 50 MHz maximum Speed 16 kByte Memory
MOQ: 1 |

CY8C3444LTI-114 Übersicht

The Infineon CY8C3444LTI-114 is an 8-bit PSoC 3 programmable system-on-chip with a 50 MHz 8051 CPU, 16 kByte of flash memory, 2 kByte of SRAM, and a 68-VFQFN package with an exposed pad. It combines a microcontroller core with configurable analog and digital blocks, making it suitable for embedded sensing, control, and low-power instrument applications.

A PSoC, or programmable system-on-chip, is a mixed-signal microcontroller that integrates a CPU, programmable analog and digital peripherals, memory, and routing resources on one die. Unlike a fixed-function MCU, the CY8C3 family allows designers to configure peripheral behavior and signal routing in firmware, reducing the need for discrete external components and consolidating analog control with digital logic.

The CY8C3444LTI-114 provides up to 50 MHz CPU operation, 16 kByte of flash, and 2 kByte of SRAM. Its configurable blocks support analog functions such as analog-to-digital conversion, digital-to-analog conversion, comparators, and timers, while digital blocks can implement counters, serial communication, and programmable logic. The 68-VFQFN package also includes an exposed thermal pad for improved heat removal.

The CY8C3 architecture provides a unified development approach in which firmware configures analog routing, interrupt behavior, and digital peripherals. This makes the device especially useful for sensor interfaces, industrial control panels, building controls, and low-power measurement systems where analog signal conditioning and microcontroller processing must coexist on a compact board.

Typical uses include temperature and environmental sensing, touch-controlled interfaces, motor and actuator control, low-power industrial nodes, and compact test instruments. Designers should preserve the exposed-pad copper area, follow the recommended decoupling layout, and confirm the device-specific operating limits against the Cypress PSoC 3 CY8C34 Family Data Sheet.

When designing the PCB, connect the exposed pad to the ground plane with thermal vias and place input and output capacitors close to their associated pins. Validate startup behavior, brownout settings, clock configuration, and unused-pin states in firmware because the exposed pad and analog supply pins have defined electrical requirements.

This page combines package, memory, processor, and cross-reference information with practical PCB guidance for engineers evaluating the CY8C3444LTI-114 in new PSoC 3 designs. It also identifies the closest documented same-family option and explains where a confirmed drop-in replacement has not been established.

Drop-in-Alternativen für CY8C3444LTI-114 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit CY8C3444LTI-114 (gleiche Bauform und Footprint) – abweichend in Package.

Infineon
Package: 48-QFN (7 x 7 mm)
Vergleichen mit CY8C3444LTI-114 →

CY8C3444LTI-111

✅ Drop-In
Infineon
📦 68-VFQFN with exposed pad
Flash-programmable system-on-chip (PSoC 3) · 8051, 8-bit · 50 MHz · 16 KB Flash (16K x 8) · 2 kByte · PSoC 3 CY8C34 family · 68-QFN (8 mm x 8 mm) · HVQCCN

Preis auf Anfrage

Datenblatt ansehen →

CY8C3444LTI-114 Grenzwerte & elektrische Eigenschaften

Device Type 8-bit Flash Programmable System-on-Chip (PSoC 3)
CPU Architecture 8051, up to 50 MHz
CPU Speed 50 MHz maximum
Flash Memory 16 kByte
SRAM 2 kByte
Gehäuse 68-VFQFN with exposed pad
Programmable Architecture Configurable analog and digital blocks with signal routing
Power Class Ultra-low-power PSoC 3 device
Montageart Surface mount

CY8C3444LTI-114 68-vfqfn with exposed pad Pinbelegungsleitfaden

Pinbelegung für CY8C3444LTI-114 (68-vfqfn with exposed pad-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für CY8C3444LTI-114 im 68-vfqfn with exposed pad-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für CY8C3444LTI-114.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

CY8C3444LTI-114 ist geeignet für 6 Anwendungs: Low-Power Environmental Sensing, Industrial Control Panel, Touch and Capacitive Sensing Interface, Actuator and Motor Control Node, Compact Test and Measurement Instrument, Building Automation and HVAC Control.

🧩

Low-Power Environmental Sensing

The CY8C3444LTI-114 fits distributed environmental sensing because its PSoC 3 architecture places configurable analog and digital functions beside an 8-bit CPU running up to 50 MHz. A design can use configurable analog blocks for sensor conditioning and digital blocks for sampling control while the 16 kByte flash holds application firmware and 2 kByte of SRAM supports working data. The 68-VFQFN package keeps the assembly compact but requires a land pattern that connects its exposed pad to the ground plane. For battery-operated nodes, select the lowest-power operating mode supported by the device configuration and account for the sensor, regulator, and any wireless interface when calculating the complete energy budget.

🏭

Industrial Control Panel

For a compact industrial control panel, the CY8C3444LTI-114 can combine input conditioning, control logic, and output handling in one programmable device. Its 50 MHz 8051 core provides deterministic control-loop execution, while configurable digital blocks can implement counters, timing, and serial interface functions. The 16 kByte flash and 2 kByte SRAM are appropriate for protocol handling and local state when the application does not require a large user interface or extensive data logging. Keep the exposed-pad grounding and analog trace routing consistent with the manufacturer package guidelines to prevent ground-current coupling from degrading measurement accuracy.

📱

Touch and Capacitive Sensing Interface

The CY8C3444LTI-114 is suitable for touch and capacitive sensing interfaces because PSoC 3 devices combine configurable analog sensing resources with programmable digital control. The analog section can handle the sensing element and conditioning while the 8051 CPU running up to 50 MHz performs filtering, debouncing, and interface updates. Using configurable blocks can reduce the external component count compared with a fixed-function MCU design, although final performance depends on the selected analog configuration and PCB construction. Route sensor electrodes away from switching and high-current traces, maintain a stable ground reference under the analog section, and follow the exposed-pad thermal-via pattern specified for the 68-VFQFN package.

⚡

Actuator and Motor Control Node

The CY8C3444LTI-114 can serve as the control node for small actuators, relays, or motor-control subsystems where timing, sensing, and digital logic must coexist. The 50 MHz CPU supports responsive control calculations, while configurable timer and digital resources can implement pulse generation, fault counting, and input synchronization. Its 16 kByte of flash is useful for compact control firmware, and the 2 kByte SRAM can hold state and communication buffers. Separate sensitive analog and power-return paths from actuator drive traces to limit noise coupling, and confirm that the device supply remains within its specified limits during switching events.

🔧

Compact Test and Measurement Instrument

A compact test instrument can use the CY8C3444LTI-114 to consolidate measurement conditioning, signal processing, and control functions. The configurable analog blocks support adaptable acquisition paths, while the 50 MHz 8051 core performs scaling, filtering, and calibration in firmware. The 16 kByte flash and 2 kByte SRAM suit lightweight instruments with local calibration data and short measurement sequences. Place analog input traces away from digital switching nodes, reference the analog section to a continuous ground plane, and use the exposed pad as both the package thermal path and the specified electrical connection. Validate input impedance and settling behavior against the selected analog-block configuration.

🏠

Building Automation and HVAC Control

The CY8C3444LTI-114 is appropriate for building-automation endpoints that combine temperature or occupancy sensing with relay, alarm, or communication functions. The programmable system-on-chip architecture lets firmware configure analog measurement channels and digital control blocks without relying on a fixed peripheral map, while the 8-bit CPU handles local decisions. The 50 MHz operating capability supports time-critical control tasks, and the compact 68-VFQFN package assists space-constrained sensor nodes. Use the manufacturer package drawing for the exposed-pad land pattern, provide multiple ground vias, and isolate long field-wired inputs from sensitive analog traces to improve robustness in electrically noisy environments.

Zusammenfassung der empfohlenen Produkte

CY8C3444LTI-111 Infineon Verwendet in: Low-Power Environmental Sensing, Touch and Capacitive Sensing Interface, Compact Test and Measurement Instrument CY8C3444LTI-119T PSoC 3 CY8C34 family device with the same memory configuration Verwendet in: Industrial Control Panel, Actuator and Motor Control Node, Building Automation and HVAC Control
What is the CY8C3444LTI-114?
The CY8C3444LTI-114 is an 8-bit PSoC 3 programmable system-on-chip from the Cypress Semiconductor product line, now represented by Infineon. It combines an 8051 CPU operating up to 50 MHz with 16 kByte of flash, 2 kByte of SRAM, and configurable analog and digital blocks in a 68-VFQFN package. The CY8C34 Family Data Sheet describes it as an ultra-low-power Flash Programmable System-on-Chip designed for configurable mixed-signal embedded designs.
What are the key specifications of CY8C3444LTI-114 that engineers should know?
The principal CY8C3444LTI-114 specifications are an 8-bit 8051 CPU, operation up to 50 MHz, 16 kByte of flash memory, 2 kByte of SRAM, and a 68-VFQFN package with an exposed pad. Its defining feature is the PSoC 3 configurable block architecture, which lets firmware establish analog and digital routing. These figures identify the device as a mixed-signal MCU rather than a general-purpose fixed-function controller.
How much flash and SRAM does the CY8C3444LTI-114 have?
The CY8C3444LTI-114 contains 16 kByte of flash memory and 2 kByte of SRAM. Product listings describe the device as an 8-bit MCU with 16KB flash, while the Infineon PSoC 3 family entry for CY8C3444LTI-119T confirms the same family pairing of 16 kByte flash with 2 kByte SRAM. The flash stores firmware and configuration data, while the SRAM supports working data and stack operations.
Where can I download the CY8C3444LTI-114 datasheet PDF?
The CY8C3444LTI-114 datasheet is published as the Cypress Semiconductor CY8C34 Family Data Sheet for PSoC 3 devices. Use the manufacturer documentation link on this page for the authoritative PDF, and use the pin-description and ordering-information tables there when assigning the 68-VFQFN footprint. Because package and temperature suffixes can select different device options, confirm that every ordering code in the document matches the selected CY8C3444LTI-114 configuration.
Where can I find the CY8C3444LTI-114 pinout?
The CY8C3444LTI-114 pinout is documented in the pin-description section of the Cypress PSoC 3 CY8C34 Family Data Sheet. The device uses a 68-VFQFN package with an exposed pad, so the land pattern must include the thermal and electrical connection specified for that pad. Use the datasheet pin table and package drawing for exact signal names, exposed-pad connections, and recommended PCB footprint dimensions.
What can replace the CY8C3444LTI-114?
The closest documented same-family drop-in option is the CY8C3444LTI-111. A published comparison states that it uses the same 68-VFQFN package, has consistent terminals and package characteristics, and does not require modification of the existing circuit. Treat this as a family-level replacement candidate, then verify the ordering table, firmware configuration, and temperature marking for the exact production application before releasing the design.
Is the CY8C3444LTI-111 a drop-in replacement for the CY8C3444LTI-114?
The CY8C3444LTI-111 is documented as a direct replacement for the CY8C3444LTI-114 because both use the 68-VFQFN package and retain consistent terminals and main performance characteristics without requiring circuit changes. Confirm the final device selection against the manufacturer ordering information, particularly the temperature grade and any configuration-specific suffix, before treating it as an approved substitute for an existing BOM.
Is there an Infineon equivalent for the CY8C3444LTI-114 from another manufacturer?
No independently confirmed cross-manufacturer drop-in equivalent was identified for the CY8C3444LTI-114. Pin compatibility alone is insufficient for a PSoC 3 because the programmable analog and digital blocks, routing fabric, interrupt structure, and firmware configuration are device-specific. The documented same-family CY8C3444LTI-111 is the safer starting point, while a cross-brand substitution would require a complete hardware and firmware equivalence review.
When should I choose the CY8C3444LTI-114 instead of a general-purpose MCU?
Choose the CY8C3444LTI-114 when the design needs on-chip configurability for analog and digital functions rather than a fixed peripheral set. Its programmable blocks can consolidate functions that would otherwise require external converters, comparators, routing hardware, and glue logic. A general-purpose MCU can be preferable when every peripheral is already standardized, but the PSoC 3 approach is valuable when the signal path must be adapted during firmware development.
Is the CY8C3444LTI-114 suitable for industrial control applications?
The CY8C3444LTI-114 is suitable for industrial and embedded control concepts that require an 8-bit MCU, configurable mixed-signal resources, 16 kByte of flash, and 2 kByte of SRAM. Its ultra-low-power PSoC 3 architecture also suits distributed sensing and control nodes. Before release, verify the exact operating-temperature range, supply limits, EMC requirements, and qualification status in the device documentation and your end-product qualification plan.
How much power does the CY8C3444LTI-114 consume?
The CY8C3444LTI-114 belongs to the ultra-low-power PSoC 3 family, but its consumption depends on the selected clock, active analog blocks, operating mode, and supply voltage. The family documentation describes multiple low-power operating approaches rather than one universal current figure. For a power budget, use the active, sleep, and shutdown current tables for the exact configuration and include external pull networks, sensors, and regulators in the system estimate.
What layout considerations apply to the 68-VFQFN CY8C3444LTI-114?
The 68-VFQFN package has a compact pitch and an exposed pad, so the PCB layout should follow the manufacturer package drawing exactly. Keep decoupling capacitors close to their supply pins, provide a continuous ground reference beneath the device, and use multiple thermal vias to connect the exposed pad to the ground plane. Analog inputs and externally sensitive signals should be routed away from fast-switching nodes and the pad connection.
Where can I buy CY8C3444LTI-114 online?
Use the Request a Quote form on this page to request CY8C3444LTI-114 availability, order quantities, and current commercial terms. The part is also indexed by authorized distribution channels under the same MPN, with the listing presented as an Infineon Technologies device. Confirm the exact suffix, date code, packaging format, and shipment condition when placing an order to avoid mismatched procurement.
What is the price of the CY8C3444LTI-114?
Current commercial pricing for the CY8C3444LTI-114 should be requested through the Request a Quote form on this page. Quote responses reflect the ordered quantity, package shipment format, date code, and current market conditions. For design budgeting, use the structured price information displayed with this product and request a formal quotation before committing a production BOM.
What is the lead time and stock status for the CY8C3444LTI-114?
Request the current lead time, minimum order quantity, and stock allocation through the Request a Quote form on this page. One distributor listing displays 7,952 pieces in stock and another identifies the delivery time as requiring confirmation, indicating that availability can vary by channel and order volume. Treat listing quantities as short-term snapshots and request a dated supply commitment for scheduled production.

Technische Referenzdaten für CY8C3444LTI-114 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Select the CY8C3444LTI-114 when a design requires a compact 8-bit PSoC 3 controller with configurable analog and digital blocks, up to 50 MHz execution, 16 kByte of flash, and 2 kByte of SRAM. It is especially useful when replacing external converters, comparators, or routing logic with programmable on-chip resources can simplify the board. The CY8C3444LTI-111 is the preferred same-family substitution because published comparison information identifies matching terminals and the same 68-VFQFN package. Nevertheless, verify ordering suffix, temperature grade, and device configuration before release. Do not select CY8C3444LTI-109 as a direct replacement because its 48-QFN package requires a different footprint. If the application requires more SRAM, flash, peripheral resources, or a larger established software ecosystem, choose a higher-tier MCU instead. For cross-brand substitution, budget additional firmware and hardware verification because PSoC peripheral routing and tooling are device-specific.

Vergleich mit Alternativen

Parameter Dieses Produkt CY8C3444LTI-111
Manufacturer Brand Infineon Infineon
Package 68-VFQFN with exposed pad 68-VFQFN with exposed pad
Device Type 8-bit PSoC 3 Flash Programmable System-on-Chip 8-bit PSoC 3 Flash Programmable System-on-Chip
CPU Speed Up to 50 MHz Up to 50 MHz
Flash Memory 16 kByte 16 kByte
SRAM 2 kByte 2 kByte
Programmable Blocks Configurable analog and digital blocks Configurable analog and digital blocks
Exposed Pad Present Present

Wichtigste Unterscheidungsmerkmale

  • Documented pin-compatible family replacement (vs. CY8C3444LTI-111)
  • Configurable mixed-signal integration (vs. CY8C3444LTI-111)
  • Compact exposed-pad package (vs. CY8C3444LTI-109)

Designhinweise

Use the manufacturer package drawing for the 68-VFQFN land pattern and exposed-pad connection. The pad should tie to the specified ground connection through multiple thermal vias, while retaining adequate solder-mask clearance where required by the assembly process. Keep decoupling components close to the associated supply pins and provide a continuous ground reference beneath the device. A compact land pattern without adequate thermal-via density can increase junction temperature and degrade analog performance.

Separate analog input paths from digital switching, clock, and actuator-drive traces. Route sensitive measurements over a quiet ground region, keep the analog ground and exposed-pad connection compatible with the device recommendation, and avoid sharing narrow return paths with pulsed loads. PSoC routing resources determine internal analog-to-digital paths, but they cannot compensate for poor PCB coupling. Review both internal routing and physical trace geometry when configuring high-impedance sensors.

Do not assume that all CY8C3444 variants are interchangeable merely because their flash and SRAM sizes match. Confirm the package, temperature grade, ordering suffix, device configuration, and exposed-pad requirements in the ordering table. The CY8C3444LTI-111 is a documented same-package replacement candidate, while the CY8C3444LTI-109 uses a 48-QFN package and is therefore not pin-compatible with the 68-VFQFN target.

Calculate the complete system power budget using the operating mode selected for the target configuration rather than a single generic current value. Include analog blocks, digital peripherals, external sensors, regulators, and communication hardware. Review brownout and supply sequencing behavior in firmware, and verify that transient loading from actuators cannot pull the local supply outside its permitted range. This guidance supports design planning but does not replace the electrical limits published in the device data sheet.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance status was not stated in the available product information. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification statements against the current manufacturer product documentation and the exact ordering code.

Daten verifiziert am: 2026-11-15 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

CY8C3444LTI-114 datasheet CY8C3444LTI-114 pinout CY8C3444LTI-114 specifications CY8C3444LTI-114 equivalent CY8C3444LTI-114 replacement CY8C3444LTI-114 vs CY8C3444LTI-111 CY8C3444LTI-114 drop-in replacement CY8C3444LTI-114 price CY8C3444LTI-114 stock Infineon CY8C3444LTI-114 CY8C3444LTI-114 68-VFQFN CY8C3444 16KB flash 50MHz CY8C3444LTI-114 footprint CY8C3444 PSoC 3 application circuit CY8C3444LTI-114 buy

Verwandte Bauteile & Begriffe

Infineon Cypress Semiconductor CY8C3444LTI-114 CY8C3444LTI-111 CY8C3444LTI-119T CY8C3444LTI-109 PSoC 3 Programmable System-on-Chip microcontroller mixed-signal MCU 8051 CPU 50 MHz 16 kByte flash 2 kByte SRAM configurable analog blocks configurable digital blocks 68-VFQFN package exposed pad surface mount ultra-low-power signal routing analog-to-digital conversion industrial control environmental sensing
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen