DAC38RF83IAAVR - Dual 14-Bit 9-GSPS RF-Sampling DAC | TI
部品番号: DAC38RF83IAAVR ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $1185 | $1,185.00 |
| 10 | $1112 | $11,120.00 |
| 100 | $1049 | $104,900.00 |
| 500 | $985 | $492,500.00 |
| 1,000 | $921 | $921,000.00 |
DAC38RF83IAAVR 概要
An RF-sampling DAC is a data-converter device that generates analog output signals directly at radio frequencies, eliminating the need for multiple upconversion mixer stages in the transmit chain. Within the signal-chain hierarchy, the DAC38RF83 sits in the data converters -> digital-to-analog converters -> RF-sampling DAC category and forms the heart of modern wideband transmitter architectures for wireless infrastructure and radar.
Key features include dual-channel 14-bit resolution with a 9 GSPS maximum update rate, on-chip 6x-24x interpolation filters that relax data-interface speed requirements, and an integrated PLL/VCO clocking multiplier supporting 6 GHz and 9 GHz reference modes. The JESD204B interface with up to 8 lanes simplifies connectivity to FPGAs, and both single-ended and differential output options are supported.
Architecturally, the DAC38RFxx family combines a high-dynamic-range current-steering DAC core with digital signal processing blocks, including complex and real mixing (NCO), digital upconversion, and programmable interpolation. The RF-sampling approach supports 3G/4G/5G wideband carrier aggregation with high SFDR performance.
Typical applications include wireless base-station transmitters (3G/4G/5G), wideband radar and electronic warfare signal generation, cable headend and broadband signal synthesis, and test-and-measurement arbitrary waveform generation.
Design consideration: maintain clean low-noise clocking and adequate thermal design in the FCBGA package; the high output swing at RF frequencies demands careful RF output balun/filter network selection per the datasheet application section.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing referenced as of 2026-09-03.
ドロップイン代替品: DAC38RF83IAAVR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DAC38RF83IAAVR （同一形状・フットプリント） — 相違点: Architecture, On-Chip PLL, Output Frequency Range, Output Type, RoHS Status.
クイック比較ツール — 並列比較する代替部品を選択:
DAC38RF83IAAV
✅ ドロップイン✓ 在庫あり
$165 / 個
データシートを見る →DAC38RF82IAAV
✅ ドロップイン📋 参考代替品（カタログ未掲載）
DAC38RF84IAAV
✅ ドロップイン📋 参考代替品（カタログ未掲載）
DAC38RF89IAAV
✅ ドロップイン📋 参考代替品（カタログ未掲載）
DAC38RF83IAAVR 最大定格＆電気的特性
| 分解能 | 14 bit |
| Number of DAC Channels | 2 |
| Maximum Update Rate | 9 GSPS |
| Output Frequency Range | 0 to 4.5 GHz |
| Interpolation | 6x to 24x |
| Integrated PLL | 6 GHz and 9 GHz PLL |
| Data Interface | JESD204B |
| 出力タイプ | Single-ended or differential |
| Architecture | RF-sampling current-steering |
| パッケージ | 144-FCBGA (10x10 mm) |
| 動作温度 | -40C to +85C |
| 実装タイプ | Surface Mount |
| Packaging | Tape & Reel (R suffix) |
| Part Status | Active |
| RoHS ステータス | Compliant |
DAC38RF83IAAVR 144-fcbga (10x10 mm) ピン配置ガイド
DAC38RF83IAAVR (144-fcbga (10x10 mm) パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: DAC38RF83IAAVR.
詳細は データシート をご参照ください。
主な用途
DAC38RF83IAAVR の用途: 6 件s: 5G/4G Wireless Base-Station Transmitters, Wideband Radar and Electronic Warfare Signal Generation, Test and Measurement Arbitrary Waveform Generation, Cable and Broadband Signal Synthesis, Satellite Communications Upconverters, FPGA-Based SDR Transmit Platforms.
5G/4G Wireless Base-Station Transmitters
The DAC38RF83IAAVR fits wireless base-station transmit chains because its 9 GSPS update rate and 0-to-4.5 GHz direct RF output synthesize wideband, carrier-aggregated 3G/4G/5G waveforms without mixer upconversion stages. The 6x-24x interpolation lets a low-rate JESD204B FPGA link feed an RF-speed DAC, and the integrated 6 GHz/9 GHz PLL removes an external high-frequency multiplier. Placed after the FPGA transceivers with a differential RF output network and balun, it delivers the high dynamic range the DAC38RFxx datasheet cites for multi-carrier radio. Trade-off: RF-sampling operation demands careful clock jitter and thermal management at full rate.
おすすめ
Wideband Radar and Electronic Warfare Signal Generation
For radar and EW transmit exciter paths, the DAC38RF83IAAVR generates chirp and agile wideband waveforms directly at L-, S-, C-band and beyond using its 0-to-4.5 GHz RF-sampling output. The dual-channel architecture supports simultaneous I/Q generation with digital upconversion via the on-chip NCO and mixer, achieving the high dynamic range required for clutter-limited detection per the TI DAC38RFxx datasheet. The -40C to +85C industrial rating suits outdoor and conformal installations. Design consideration: waveform spectral purity depends strongly on reference clock phase noise, so low-jitter clocking must be budgeted alongside DAC SFDR.
おすすめ
Test and Measurement Arbitrary Waveform Generation
In AWG and RF vector signal generator front ends, the DAC38RF83IAAVR provides 14-bit resolution at 9 GSPS, letting instruments produce pulses, modulated carriers, and multi-tone signals up to 4.5 GHz natively. The JESD204B interface connects cleanly to FPGA waveform engines, and the 6x-24x interpolation filters suppress images, easing analog reconstruction filter design. The dual-channel mode enables differential or I/Q output instruments. Quantified benefit: direct RF synthesis removes mixer image and LO-leak artifacts, improving spectral purity; the trade-off is higher power and cost than IF-speed DACs, justified in premium instrumentation.
おすすめ
Cable and Broadband Signal Synthesis
Cable headend and broadband distribution equipment benefit from the DAC38RF83IAAVR's ability to synthesize multi-channel and DOCSIS-class wideband signals across its 0-to-4.5 GHz output span at 9 GSPS. The high dynamic range of the DAC38RFxx family cited by TI supports high modulation-order waveforms, while on-chip mixing and interpolation let a single device replace concatenated DAC-plus-mixer stages, reducing component count and calibration effort. Outputs can be configured single-ended or differential to match hybrid or balun-coupled line drivers. Performance consideration: output power flatness at band edges must be verified in the analog network design.
おすすめ
Satellite Communications Upconverters
Satcom ground terminals and transponders use the DAC38RF83IAAVR to generate IF and direct-L-band modulated carriers with 14-bit precision at up to 9 GSPS, supporting high-order QPSK through 256APSK waveforms. The on-chip PLL clocked at 6 GHz or 9 GHz simplifies the clocking tree in space-constrained terminals, and the JESD204B link provides deterministic latency needed for burst-mode transmissions. The industrial temperature grade and FCBGA mechanical robustness suit outdoor units. Design tip: SYSREF and JESD204B subclass timing must be implemented for phase-coherent multi-carrier operation across channels.
おすすめ
FPGA-Based SDR Transmit Platforms
Software-defined radio developers pair the DAC38RF83IAAVR with JESD204B-capable FPGAs to build flexible wideband transmit platforms. The 8-lane-class JESD204B link, 6x-24x interpolation, and digital NCO mixing move most waveform processing into the digital domain, letting a single PCB cover HF through C-band by changing digital configuration rather than analog hardware. The 144-FCBGA footprint integrates cleanly on 10x10 mm land patterns with standard BGA assembly. Consideration: the premium unit price (about 1185 USD as of 2026-09-03) positions this part for professional SDR, not hobby designs.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DAC38RF83IAAVR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DAC38RF83IAAV | DAC38RF82IAAV | DAC38RF84IAAV | DAC38RF89IAAV |
|---|---|---|---|---|---|
| Package | 144-FCBGA (10x10) | 144-FCBGA (10x10) - same | 144-FCBGA (10x10) - same | 144-FCBGA (10x10) - same | 144-FCBGA - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 14 bit | 14 bit | 14 bit | 14 bit | 14 bit |
| Maximum Update Rate | 9 GSPS | 9 GSPS | 9 GSPS | 9 GSPS | 9 GSPS |
| Output Frequency Range | 0 to 4.5 GHz | 0 to 4.5 GHz | 0 to 4.5 GHz | 0 to 4.5 GHz | 0 to 4.5 GHz |
| Interpolation | 6x-24x | 6x-24x | 6x-24x | 6x-24x | 6x-24x |
| Integrated PLL | 6 GHz and 9 GHz | 6 GHz and 9 GHz | 6 GHz and 9 GHz | 6 GHz and 9 GHz | 6 GHz and 9 GHz |
| Data Interface | JESD204B | JESD204B | JESD204B | JESD204B | JESD204B |
主な差別化要因
- True dual-channel RF synthesis in one package （vs DAC38RF82IAAV)
- Identical device with tray packing option （vs DAC38RF83IAAV)
- 6 GHz and 9 GHz PLL modes （vs DAC38J84IAAV)
設計ノート
RF-sampling DAC output quality is dominated by clock phase noise: an RMS jitter budget must be allocated so that jitter-limited SNR (approximately 20*log10(f_out/f_jitter)) does not degrade the 14-bit core. Use a low-noise oscillator and route the DAC38RF83 clock differentially with impedance control, keeping the SYSREF network length-matched to the JESD204B lanes for deterministic latency (subclass operation).
The 144-FCBGA (10x10 mm) requires a dense via field under the package for all power and ground balls; use a minimum of one via per power ball and stitch the ground plane generously to handle high transient current at 9 GSPS operation. Follow the DAC38RFxx datasheet PCB layout guidelines for stackup, ball escape routing, and keep JESD204B lanes as length-matched 100-ohm differential pairs.
Estimated: at full-rate dual-channel RF operation the device dissipates power in the multi-watt class (exact figure per datasheet); with a typical FCBGA theta-JA on a standard multilayer board, junction rise at +85C ambient can approach limits, so use 2-oz copper ground planes and thermal vias, and verify die temperature with the on-chip monitoring or calculation per datasheet thermal section before production sign-off.
コンプライアンス情報
RoHS compliance and lead-free construction indicated by distributor listings (DigiKey, PCBElectronics). REACH and conflict-minerals status should be confirmed via the TI Quality and Environmental portal.
