Vishay Intertechnology

DG301ABA - Dual SPST CMOS Analog Switch | Vishay

部品番号: DG301ABA ✗ 生産終了
±5 V to ±18 V Vdss 10-pin TO-100 Package
MOQ: 1 |

DG301ABA 概要

The Vishay Intertechnology DG301ABA is a dual SPST, TTL-compatible CMOS analog switch in a 10-pin TO-100 package. It supports bipolar supply operation from ±5 V to ±18 V and can also operate from a single supply when the V− rail is connected to 0 V. Typical power consumption is 3.5 mW, making the device suitable for compact, battery-powered analog signal-routing circuits.

An analog switch is a semiconductor device that uses control logic to connect or disconnect analog signals. The SPST configuration provides one normally open switch path per channel, while the dual-channel package allows two independently controlled routes. In the power-management hierarchy, this component belongs to the interface-IC category because it manages signal connectivity rather than regulating voltage or processing digital data.

The DG301ABA provides break-before-make switching behavior, preventing the input and output terminals from momentarily connecting together during a transition. Its switch-control inputs are compatible with both TTL and CMOS logic. Low charge injection reduces the unwanted voltage transient that can occur when control signals change and is important when switching precision analog signals.

Operation across ±5 V to ±18 V provides flexibility for systems using split analog supplies as well as lower-voltage designs using a single supply. The typical 3.5 mW power consumption supports battery-powered circuitry where switching losses and standby power materially affect energy budget. The control architecture is designed to preserve signal isolation during switching transitions.

Typical uses include battery-powered measurement systems, precision analog signal selection, data-acquisition front ends, test equipment, and general-purpose routing of low-frequency analog signals. The logic-compatible control inputs also make the device convenient for systems where CMOS or TTL digital controllers select among external sensor or conditioning circuits.

Designers should confirm the exact pin configuration and switch state from the manufacturer datasheet before layout. The break-before-make timing must be considered when a downstream circuit cannot tolerate two paths being connected briefly. Input and output signal amplitudes must also remain within the device's absolute maximum and operating limits.

This page combines the DG301ABA architecture, supply-range information, package details, pin-compatible family references, comparison data, and practical routing guidance. It is intended to help engineers evaluate the device for analog switching, select a suitable replacement, and plan PCB implementation without relying on incomplete catalog summaries.

ドロップイン代替品: DG301ABA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

DG301AAA

✅ ドロップイン
📦 TO-100-10
Same DG301A family and 10-pin TO-100 footprint; exact switch topology and electrical ratings require ordering-code verification

📋 参考代替品(カタログ未掲載)

DG301ABA/ACA-ABZ

✅ ドロップイン
📦 TO-100-10
Same DG301ABA base device with alternate ordering suffixes; functional and electrical ratings are identical when the suffixes denote only documentation or packaging

📋 参考代替品(カタログ未掲載)

DG301ABA 最大定格&電気的特性

Switch Configuration Dual SPST
Number of Circuits 2 circuits
Supply Voltage Range, Bipolar ±5 V to ±18 V
Single-Supply Operation Supported by connecting V− to 0 V
Typical Power Consumption 3.5 mW
Control Input Compatibility TTL and CMOS compatible
Switching Action Break-before-make
Charge Injection Low
パッケージ 10-pin TO-100
実装タイプ Through-hole

DG301ABA 10-pin to-100 ピン配置ガイド

DG301ABA (10-pin to-100 パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

DG301ABA の 10-pin to-100 パッケージピン配置図

詳細なピン配置データはありません: DG301ABA.

詳細は データシート をご参照ください。

主な用途

DG301ABA の用途: 6 件s: Battery-Powered Sensor Routing, Precision Data-Acquisition Front End, Test and Measurement Signal Routing, Analog Signal Isolation, Audio and Low-Frequency Analog Routing, Industrial Control Signal Multiplexing.

🧩

Battery-Powered Sensor Routing

The DG301ABA fits battery-powered sensor interfaces because its dual SPST topology can route a sensor signal between measurement and isolation paths while typical power consumption remains 3.5 mW. Break-before-make operation prevents the old and new signal paths from overlapping during a control transition, while low charge injection limits the control-induced disturbance reaching a sensitive amplifier. The logic-compatible control inputs permit direct connection to CMOS or TTL controller outputs. A single-supply arrangement can also be created by connecting V− to 0 V, although the selected power range and signal amplitudes must be checked against the device ratings before implementation.

📊

Precision Data-Acquisition Front End

The DG301ABA is suitable for switching analog inputs in a precision data-acquisition front end, where low charge injection helps preserve measurement integrity during control changes. Its dual SPST organization allows two independent signal paths to be isolated or selected with a small number of control lines. Break-before-make action avoids the unintended interval in which two paths are connected together, which can produce charge sharing or loading errors. The TTL- and CMOS-compatible control inputs simplify integration with digital controllers and analog-to-digital converter interface logic.

🔧

Test and Measurement Signal Routing

The DG301ABA can route low-frequency measurement signals in test equipment where compact analog switching and controlled transitions are valuable. Its 10-pin TO-100 package provides a straightforward through-hole implementation for laboratory and industrial boards. The break-before-make characteristic helps ensure that the instrument does not momentarily connect a driven node to another source during range or channel changes. Low charge injection reduces the control transient that could otherwise disturb high-impedance measurement nodes. Supply selection should preserve the supported ±5 V to ±18 V operating range, or use the documented single-supply configuration.

🌐

Analog Signal Isolation

The DG301ABA can implement analog signal isolation between a source and a downstream instrument or amplifier. Opening the switch path reduces coupling between circuit sections, while the break-before-make sequence prevents unintended source overlap during state changes. The dual SPST arrangement provides two controlled isolation points and can simplify layouts where separate analog channels require isolation. Because leakage, off isolation, and on resistance determine practical signal integrity, these parameters should be checked against the source impedance, signal bandwidth, and required isolation margin in the manufacturer data table.

🎧

Audio and Low-Frequency Analog Routing

The DG301ABA can select low-frequency audio or instrumentation signals when the source impedances remain within the switch’s supported operating conditions. Its break-before-make behavior avoids momentarily cross-connecting two outputs, which is useful when routing mutually exclusive sources. Low charge injection helps limit control transients at the selected output, while TTL- and CMOS-compatible controls permit straightforward interfacing with digital audio or test controllers. The through-hole TO-100 package is particularly convenient for legacy and industrial audio boards that are not built around high-density surface-mount routing.

🏭

Industrial Control Signal Multiplexing

The DG301ABA can multiplex control or instrumentation signals in an industrial system by placing two SPST switch sections under separate control commands. Its typical 3.5 mW power consumption is advantageous when many switched channels are used in a compact control assembly. The 10-pin TO-100 format supports conventional through-hole board construction and straightforward inspection. For factory equipment, the final component selection should include verification of the operating temperature range, supply limits, on-resistance, leakage, and reliability information rather than relying only on the family description.

おすすめ製品の概要

DG301AAA Same-family dual SPST analog switch 使用用途: Battery-Powered Sensor Routing, Precision Data-Acquisition Front End, Test and Measurement Signal Routing, Analog Signal Isolation, Audio and Low-Frequency Analog Routing, Industrial Control Signal Multiplexing DG301ABA/ACA-ABZ Same base-device ordering reference 使用用途: Battery-Powered Sensor Routing, Test and Measurement Signal Routing, Analog Signal Isolation, Audio and Low-Frequency Analog Routing DG301ABK DG301A family ordering reference 使用用途: Precision Data-Acquisition Front End, Industrial Control Signal Multiplexing
What is the DG301ABA?
The DG301ABA is a dual SPST, TTL-compatible CMOS analog switch manufactured by Vishay Intertechnology in a 10-pin TO-100 package. According to the Analog Devices DG301A product information, the switch-control inputs accept TTL and CMOS logic, the devices support break-before-make operation, and low charge injection makes them suitable for precision analog-routing applications. The family operates from ±5 V to ±18 V and also permits single-supply operation by connecting V− to 0 V.
What are the key specifications of DG301ABA that engineers should know?
The DG301ABA is a dual SPST CMOS analog switch with TTL-compatible control inputs, break-before-make switching, and low charge injection. It operates across ±5 V to ±18 V and supports a single-supply configuration when V− is tied to 0 V. Its typical power consumption is 3.5 mW. The Vishay DG300A family datasheet also describes the device as suitable for battery-powered circuitry, where low switching power and controlled transition behavior are important design considerations.
Where can I download the DG301ABA datasheet PDF?
The official DG301ABA family datasheet is available from Vishay at https://www.vishay.com/docs/84066/84066.pdf. It covers the DG300A, MIL301A, MIL302A, and MIL device families, including their electrical characteristics, switching behavior, supply configurations, and pin information. Use the manufacturer document rather than a distributor summary when assigning PCB pins, checking absolute maximum ratings, or calculating allowed signal levels.
Where can I find the DG301ABA pinout?
The DG301ABA pin configuration is shown in the Pin Configurations section of the manufacturer datasheet at https://www.vishay.com/docs/84066/84066.pdf. The device is associated with the 10-pin TO-100 package, but engineers should use the pin-configuration table for the exact DG301ABA ordering code because related DG301A variants can use different switch arrangements and package options. Assign signal, supply, ground, and control nets directly from that table.
Can the DG301ABA operate from a single supply?
Yes. The DG301ABA can operate from a single supply by connecting the V− rail to 0 V. Its family documentation specifies operation over ±5 V to ±18 V for dual-supply configurations, while the single-supply connection allows use in lower-voltage systems. The control inputs remain TTL and CMOS compatible in the intended operating region. Confirm signal and control voltage limits in the manufacturer electrical-characteristics table before finalizing the rail arrangement.
What is break-before-make switching in the DG301ABA?
Break-before-make means the DG301ABA opens the existing switch path before establishing the new connection. According to the Vishay DG300A family datasheet, this action prevents the input and output from being momentarily connected during a transition. The behavior is useful in signal-routing circuits where overlapping paths could cause charge sharing, unwanted loading, or an invalid analog level. Account for the transition interval when designing setup timing or high-speed sequencing logic.
Is DG301ABA suitable for battery-powered analog systems?
Yes. The DG301ABA is well suited to battery-powered circuitry because its typical power consumption is 3.5 mW and its control inputs are compatible with both TTL and CMOS logic. The dual SPST configuration can route signals between a sensor, amplifier, and measurement path without using a relay. Low charge injection also helps preserve precision signals during control transitions, while single-supply operation simplifies systems that do not require negative analog rails.
What can replace the DG301ABA?
The closest documented family references are DG301AAA and DG301ABA/ACA-ABZ, both associated with the same 10-pin TO-100 family and identified as pin-compatible by the manufacturer’s family information. A replacement should still be checked for identical SPST topology, control polarity, supply limits, on-resistance, and switching timing. Cross-reference tools can identify candidates, but a catalog match alone does not establish drop-in electrical compatibility.
Can DG301AAA replace DG301ABA without changing the PCB?
DG301AAA is the strongest same-package candidate identified for a board-level replacement review, and the manufacturer states that DG300A-DG303A devices are pin compatible. However, final substitution requires checking the ordering-code table for switch topology, logic levels, electrical limits, and operating temperature. The two listed parts are not automatically interchangeable if one uses a different switch configuration or test qualification. Use the manufacturer pin-configuration and ordering information for approval.
Is DG301ABA the same as DG301BA?
No. DG301ABA and DG301BA share the DG301-series naming pattern, but the suffix identifies different device variants. The manufacturer describes the DG300A-DG303A family as pin compatible, which makes the family useful for board-level evaluation, but pin compatibility does not guarantee identical switch topology, control polarity, or electrical limits. Compare the exact ordering codes and their datasheet tables before selecting either part for a new or replacement design.
When should I choose DG301ABA over a related DG301A variant?
Choose the DG301ABA when the board requires a dual-SPST analog switch, TTL-compatible control, low charge injection, and operation across ±5 V to ±18 V. A related variant may be preferable if its datasheet offers a different switch count, resistance, bandwidth, or package. The decisive checks are topology, pin function, control polarity, on-resistance, leakage, switching time, and temperature range—not the family name alone.
Is DG301ABA suitable for precision measurement or data acquisition?
The DG301ABA can suit precision measurement and data-acquisition routing because it provides low charge injection, break-before-make operation, and TTL- and CMOS-compatible controls. These characteristics reduce switching disturbances and prevent unintended overlap between the switched and switched-to paths. The device should be evaluated against the required on-resistance, off leakage, isolation, bandwidth, and signal amplitude limits for the particular sensor and converter.
What is the best Vishay equivalent for DG301ABA?
DG301AAA is the best-documented same-brand candidate for evaluating a DG301ABA replacement because both belong to the pin-compatible DG300A-DG303A family and are associated with the 10-pin TO-100 package. The manufacturer confirms family-level pin compatibility, but the ordering-code details must still be matched for switch configuration and electrical characteristics. Treat the final approval as an engineering sign-off rather than a simple name substitution.
How much does DG301ABA cost and is it in stock?
Current commercial terms should be requested through the Request a Quote form on this page because stock, quantity breaks, and lead time can change without notice. The Request a Quote workflow is the appropriate route for an exact DG301ABA order, including confirmation of package form, delivery quantity, and production availability. Use the manufacturer ordering information to ensure the quoted suffix matches the intended 10-pin TO-100 device.
Where can I buy DG301ABA with a current lead time?
Use the Request a Quote form on this page to request current DG301ABA availability, production lead time, and orderable quantity. A complete request should identify the exact MPN, required quantity, and acceptable shipment timing. Because this is a legacy-style through-hole analog switch, confirm the current lifecycle and package form before committing the design to a large assembly order.

エンジニアリング参考データ: DG301ABA — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the DG301ABA when the design needs a dual-SPST CMOS analog switch in a 10-pin TO-100 package, requires TTL- and CMOS-compatible controls, and values break-before-make operation and low charge injection. DG301AAA is the primary same-package alternative to evaluate because it belongs to the same DG301A family and uses the same TO-100-10 footprint; confirm the ordering-code differences in switch topology and electrical ratings before substitution. DG301ABA/ACA-ABZ is useful when it represents the approved commercial or documentation form of the same base device. Do not choose a related DG301-series part solely from its family name. Review supply range, on-resistance, leakage, bandwidth, control polarity, and temperature grade, and ensure the required break-before-make behavior is present.

代替品との比較

パラメータ この製品 DG301AAA DG301ABA/ACA-ABZ
Package TO-100-10 TO-100-10 TO-100-10
Brand Vishay Intertechnology Vishay Intertechnology Vishay Intertechnology
Supply Voltage Range ±5 V to ±18 V ±5 V to ±18 V family range ±5 V to ±18 V
Typical Power Consumption 3.5 mW 3.5 mW family value 3.5 mW
Control Input Compatibility TTL and CMOS compatible TTL and CMOS compatible family specification TTL and CMOS compatible
Switching Action Break-before-make Break-before-make family specification Break-before-make
Charge Injection Low Low family characteristic Low
Single-Supply Operation Supported by connecting V− to 0 V Supported by family configuration Supported by connecting V− to 0 V

主な差別化要因

  • Dual SPST signal routing with controlled transitions (vs DG301AAA)
  • Wide bipolar operating range (vs DG301ABA/ACA-ABZ)
  • Low switching disturbance for analog routing (vs DG301AAA)

設計ノート

Use the break-before-make transition to keep mutually exclusive signal sources from overlapping during switching. In high-impedance analog nodes, however, the off leakage and charge-injection characteristics remain important. Place the DG301ABA close to the switched node when control-induced charge could be coupled into a sensitive amplifier, and keep the switched traces short and away from high-speed digital or switching-regulator nodes.

For single-supply operation, connect V− to 0 V as directed by the family documentation and select supply and control levels within the stated operating limits. Do not infer the maximum allowable input-signal amplitude from the supply range alone. Check the absolute maximum ratings, on-resistance, leakage, and supply-current conditions before applying signals when the analog input can exceed the selected rail.

The TO-100 package is intended for through-hole assembly, so provide adequate spacing around the body for insertion, soldering, and inspection. Follow the manufacturer land pattern rather than estimating dimensions from the generic package name. Keep the analog switch pins and routed signal traces away from high-current switching paths, and provide a low-impedance ground return to minimize control and charge-injection coupling.

A family-level pin-compatible designation does not automatically prove that every ordering code has identical switch topology or control polarity. Before substituting DG301AAA or another DG301A variant, compare the ordering-code table, pin configuration, logic levels, on-resistance, leakage, bandwidth, operating temperature, and lifecycle status. Pay particular attention to the requirement for break-before-make behavior in the intended application.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance status is not stated in the available manufacturer and distributor information. Verify current declarations for the exact ordering code before production release.

関連検索

dg301 datasheet DG301ABA datasheet DG301ABA datasheet pdf DG301ABA pinout DG301ABA TO-100-10 DG301ABA dual SPST DG301ABA TTL CMOS compatible DG301ABA break-before-make DG301ABA drop-in replacement DG301ABA vs DG301AAA Vishay DG301ABA DG301ABA analog switch application DG301ABA price DG301ABA stock

関連部品&用語

Vishay Intertechnology Analog Devices Maxim Integrated DG301ABA DG301AAA DG301ABK DG301BA CMOS analog switch SPST switch dual SPST TTL-compatible control CMOS-compatible control break-before-make switching charge injection on resistance TO-100-10 TO-100 package through-hole package interface IC semiconductor battery-powered circuitry data acquisition industrial control analog signal routing
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示