Analog Devices

DG405DJ+ - 45Ω Dual High-Speed Analog Switch | Analog Devices

部品番号: DG405DJ+ ✓ 生産中
45 ohm Rds(on) 16-pin PDIP Package
MOQ: 1 |

DG405DJ+ 概要

Analog Devices DG405DJ+ is a dual, high-speed CMOS analog switch with two independently controlled 2:1 channels, a 45 Ω on-resistance rating, and a 16-pin PDIP package. The device supports normally open switch operation and is designed for routing high-frequency analog signals where low and stable on-resistance, controlled off-state isolation, and fast switching behavior are important.

A CMOS analog switch is a solid-state semiconductor device that routes analog or digital signals between circuit nodes using voltage-controlled gates. The DG405 family belongs to the broader analog-switch and multiplexer hierarchy, where switch topology, on-resistance, bandwidth, charge injection, and signal-to-noise performance determine whether a device is suitable for precision measurement, communications, instrumentation, or test systems. Unlike mechanical relays, these switches switch without moving contacts and can operate at much higher speeds.

The redesigned DG401, DG403, and DG405 family provides guaranteed on-resistance matching between switches of 2 Ω maximum and guaranteed on-resistance flatness over the signal range of 3 Ω maximum. The typical on-resistance is 20 Ω, while the product listing identifies a 45 Ω maximum on-resistance. These characteristics help reduce channel-to-channel error and distortion when a system switches between multiple signal sources or routes a signal to different measurement and processing circuits.

The DG405DJ+ uses CMOS circuitry to provide low power consumption and high switching speed. Each of its two channels can function as a 2:1 analog switch, enabling signal selection, channel isolation, test-point routing, and redundant signal paths. Its normally open configuration disconnects the common node while the control signal is inactive, helping prevent unwanted signal propagation when a channel is not selected.

Typical uses include audio and communications routing, data-acquisition systems, automated test equipment, sample-and-hold interfaces, and industrial control electronics. The device is particularly appropriate when the signal bandwidth and switching requirements exceed those of basic low-speed analog switches, while the 45 Ω maximum on-resistance remains acceptable for the driven load.

Designers should verify the complete electrical limits, control logic levels, switch configuration, and timing behavior in the manufacturer datasheet before finalizing signal paths. Input and output impedances, capacitance, and off-state leakage must be considered together with the 20 Ω typical on-resistance so that switching transients do not degrade accuracy or disturb adjacent high-impedance nodes.

This page consolidates the key DG405DJ+ electrical ratings, package information, drop-in identity options, application guidance, and design considerations into one engineering-focused reference. It supports faster component identification while keeping the selection grounded in the manufacturer datasheet and documented device characteristics.

ドロップイン代替品: DG405DJ+ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

DG405DJ

✅ ドロップイン
📦 16-pin PDIP
Same 45 ohm maximum on-resistance and 16-pin PDIP configuration; manufacturer identity and orderable marking differ

📋 参考代替品(カタログ未掲載)

DG405DJ-E3

✅ ドロップイン
📦 16-pin PDIP
Same 45 ohm maximum on-resistance and 16-pin PDIP configuration; the -E3 ordering suffix identifies a different production code

📋 参考代替品(カタログ未掲載)

DG405DJ

✅ ドロップイン
📦 16-pin PDIP
Same 45 ohm maximum on-resistance and 16-pin PDIP configuration; listed under a legacy Vishay or Siliconix manufacturer identity

📋 参考代替品(カタログ未掲載)

DG405DJ+ 最大定格&電気的特性

Number of Circuits 2 circuits
Switch Configuration 2:1 per channel
Maximum On-Resistance 45 ohm
Typical On-Resistance 20 ohm
On-Resistance Matching Between Switches 2 ohm maximum
On-Resistance Flatness Over Signal Range 3 ohm maximum
Technology CMOS
Switch Type Normally open
ピン数 16 pins
Package Type 16-pin PDIP
実装タイプ Through-hole
Product Family DG405
Description Improved dual high-speed analog switches
RoHS ステータス RoHS compliant
Lead-Free Status Lead free

DG405DJ+ 16-pin pdip ピン配置ガイド

DG405DJ+ (16-pin pdip パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

DG405DJ+ の 16-pin pdip パッケージピン配置図

詳細なピン配置データはありません: DG405DJ+.

詳細は データシート をご参照ください。

主な用途

DG405DJ+ の用途: 6 件s: Automated Test Equipment Signal Routing, Data-Acquisition Multiplexing, Communications Signal Isolation, Audio Signal Switching, Industrial Control Signal Routing, Sample-and-Hold Interface.

⚡

Automated Test Equipment Signal Routing

The DG405DJ+ fits automated test systems that route one common measurement node to two possible signal sources or destinations. Its dual 2:1 architecture provides independent selection, while the 45 Ω maximum on-resistance gives designers a defined insertion-loss limit. The family’s 20 Ω typical on-resistance and 2 Ω maximum matching between switches help limit channel-dependent error. At the board level, keep the common and switched nodes away from switching control traces, and verify settling time against the highest signal bandwidth used by the fixture.

📊

Data-Acquisition Multiplexing

DG405DJ+ can route analog inputs in a data-acquisition front end where each channel must connect to a common amplifier or converter. The two 2:1 sections support channel selection without mechanical relays, and the guaranteed 3 Ω maximum on-resistance flatness helps maintain predictable behavior across the signal range. When driving a high-impedance input, include amplifier input capacitance and PCB parasitic capacitance in settling calculations. Confirm leakage and off-state isolation requirements in the datasheet before reusing the same switch between adjacent high-impedance sources.

🌐

Communications Signal Isolation

The DG405DJ+ is appropriate for switching balanced or single-ended communication paths where two 2:1 channels provide convenient source selection. Its 45 Ω maximum on-resistance can support many moderate-impedance signal paths, while the 20 Ω typical value reduces insertion loss in typical designs. The normally open configuration keeps the common node disconnected during the inactive state. Validate bandwidth, insertion loss, return loss, and channel isolation at the intended operating frequency rather than relying only on the DC on-resistance rating.

🎧

Audio Signal Switching

DG405DJ+ can select between two audio paths while preserving a compact, dual-channel implementation. The 20 Ω typical on-resistance is practical for many audio inputs when the downstream amplifier presents an appropriate load, and the guaranteed channel matching of 2 Ω maximum reduces gain imbalance between switches. Use the datasheet’s distortion, off-state isolation, and bandwidth characteristics to confirm suitability for the selected signal level and impedance. Place the IC near the routed nodes to minimize added board capacitance and crosstalk.

🏭

Industrial Control Signal Routing

The DG405DJ+ can route control or sensor signals in industrial electronics where solid-state switching and independent dual-channel control are beneficial. Its CMOS implementation supports low power use, while the PDIP package remains convenient for through-hole industrial assemblies and maintenance-friendly prototypes. Designers should verify supply-voltage limits and control thresholds against the industrial system rails, then provide bypassing close to the device. Also evaluate off-state leakage when switching sensor outputs whose impedance may be much higher than the test load.

📡

Sample-and-Hold Interface

DG405DJ+ can form part of a sample-and-hold interface by connecting one of two sources to a holding or measurement node. The two independently controlled 2:1 channels allow the system to manage more than one routing function within a single package. On-resistance flatness of 3 Ω maximum provides useful control over signal-dependent resistance variation, while switching transients remain important at high source impedances. Use the manufacturer timing and charge-injection data to establish acquisition timing, and add the sampling capacitor’s leakage and dielectric behavior to the error budget.

What is the DG405DJ+?
The DG405DJ+ is a dual, high-speed CMOS analog switch containing two independently controlled 2:1 switch channels in a 16-pin PDIP package. According to the Analog Devices DG405 product page, the family provides a typical on-resistance of 20 Ω, guaranteed on-resistance matching between switches of 2 Ω maximum, and guaranteed on-resistance flatness over the signal range of 3 Ω maximum. It is intended for analog signal routing in instrumentation, communications, test, and control systems.
What are the key specifications of DG405DJ+ that engineers should know?
The DG405DJ+ is a 16-pin PDIP dual analog switch with a 45 Ω maximum on-resistance and 20 Ω typical on-resistance. The manufacturer describes it as an improved, dual, high-speed CMOS analog switch with normally open operation and two 2:1 channels. According to the Analog Devices DG405 product page, channel matching is guaranteed at 2 Ω maximum and on-resistance flatness is guaranteed at 3 Ω maximum, making these parameters central to accuracy and distortion analysis.
Where can I download the DG405DJ+ datasheet PDF?
The official DG405 product page at Analog Devices provides access to the DG405 data sheet, product selection information, documentation, and ordering resources for the DG405DJ family. Use the manufacturer datasheet as the controlling document for the DG405DJ+ electrical ratings, timing, control inputs, pin configuration, and test conditions. The DG405DJ+ designation identifies the 16-pin PDIP ordering configuration within the dual high-speed DG405 family.
Where can I find the DG405DJ+ pinout?
The DG405DJ+ pin configuration is documented in the pin-description section of the official DG405 manufacturer datasheet. The device uses a 16-pin PDIP package, so all package terminals should be assigned from the datasheet pin table rather than inferred from another DG400-series device. For board construction, use the package outline and pin-one marking on the datasheet drawing, and verify control, common, and switched-terminal names before routing signals.
Is the DG405DJ+ pin-to-pin compatible with DG405DJ?
Yes, the DG405DJ+ and DG405DJ identify ordering versions associated with the same 16-pin DG405 dual-switch family, but the final procurement record should be checked for manufacturer changes, marking codes, and orderable suffixes. Both listings identify a 2-circuit, 2:1 switch with a 45 Ω on-resistance rating in a PDIP package. Confirm the exact manufacturer, package, and operating limits on the authorized order form before treating one as a replacement for the other.
What can replace the DG405DJ+?
A drop-in replacement for the DG405DJ+ must use the same 16-pin PDIP footprint, preserve the two 2:1 channel arrangement, and meet the 45 Ω maximum on-resistance requirement. The DG405DJ under legacy manufacturer records and the Vishay DG405DJ-E3 are documented 16-pin DG405 options, but engineers should verify pin labels, control polarity, supply limits, and electrical performance before substitution. A package match alone does not establish functional drop-in compatibility.
Is DG405DJ+ the same as the Vishay DG405DJ?
The Vishay DG405DJ and Analog Devices DG405DJ+ are documented as 16-pin PDIP, two-circuit 2:1 analog switches with a 45 Ω maximum on-resistance rating. They belong to the same DG405 performance family, but corporate transfers and legacy manufacturer records can change ordering, traceability, marking, and commercial terms. Check the manufacturer datasheet and package drawing before using either ordering code in a new qualification.
What is the best Vishay equivalent for DG405DJ+?
The Vishay DG405DJ-E3 is the closest documented Vishay option because it is identified as a 2-circuit, 2:1, 45 Ω, 16-pin PDIP analog switch. It provides the same package and headline switch topology as the DG405DJ+. Before assigning it as the production replacement, compare the control-input levels, supply voltage, switch timing, leakage, pin labels, and operating-temperature limits against the DG405DJ+ requirements.
When should I choose DG405DJ+ instead of another dual analog switch?
Choose the DG405DJ+ when the design requires two independently controlled 2:1 CMOS switch channels, a maximum on-resistance of 45 Ω, and a 16-pin PDIP footprint. It is especially useful when the system benefits from guaranteed 2 Ω maximum matching between switches and 3 Ω maximum on-resistance flatness. Select a different switch if the application needs lower on-resistance, higher bandwidth, lower leakage, smaller surface-mount packaging, or a different switching topology.
Is DG405DJ+ suitable for high-speed signal routing?
The DG405DJ+ is suitable for high-speed analog routing when its datasheet bandwidth, switching time, charge injection, capacitance, and on-resistance limits fit the signal path. The manufacturer identifies the DG405 as an improved dual high-speed analog switch, with 20 Ω typical on-resistance and guaranteed matching and flatness limits. The maximum usable signal rate still depends on the source impedance, load capacitance, control timing, and acceptable settling error.
What is the on-resistance of the DG405DJ+?
The DG405DJ+ has a maximum rated on-resistance of 45 Ω and a typical on-resistance of 20 Ω. According to the Analog Devices DG405 product page, on-resistance matching between the switches is guaranteed at 2 Ω maximum, while flatness over the signal range is guaranteed at 3 Ω maximum. These figures should be evaluated together with signal amplitude, source impedance, temperature, and allowable insertion error.
How should power and decoupling be designed for DG405DJ+?
Route DG405DJ+ supply and ground connections directly to the package pins and place the required bypass capacitors close to those pins. Use the manufacturer datasheet to select the supply range, capacitor values, voltage tolerances, and placement constraints. Keep high-impedance analog nodes physically separated from supply and control traces where practical, because parasitic capacitance and switching transients can influence settling time even when on-resistance meets its maximum rating.
How many switch channels does DG405DJ+ have?
The DG405DJ+ contains two switch circuits, and each circuit provides a 2:1 routing function. The product description identifies the device as a dual high-speed CMOS analog switch with normally open operation. This architecture is useful for selecting between signal sources, connecting one common node to one of two alternatives, and building isolation or test-routing arrangements without using two separate single-switch packages.
Is DG405DJ+ active or discontinued?
The Analog Devices product page identifies the DG405 family as production, so the DG405DJ+ is treated as an active catalog position for this data set. Lifecycle status can still differ by exact orderable suffix, package, or purchasing region. Confirm the specific DG405DJ+ orderable part and manufacturing status through the Request a Quote form on this page before committing a production build.
Where can I buy DG405DJ+ and what is its lead time?
Use the Request a Quote form on this page to ask for DG405DJ+ unit availability, quantity pricing, current lead time, and minimum-order quantity. The component is a production dual high-speed analog switch in a 16-pin PDIP package, with catalog and distributor records available under the DG405DJ+ ordering code. A firm production commitment should be based on the current quote and manufacturer traceability rather than historical availability.

エンジニアリング参考データ: DG405DJ+ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the DG405DJ+ when the board requires two independently controlled 2:1 analog-switch channels, a 45 Ω maximum on-resistance, normally open behavior, and a 16-pin PDIP footprint. Its guaranteed 2 Ω maximum matching between switches and 3 Ω maximum on-resistance flatness are especially useful when channel-dependent resistance would affect measurement accuracy or signal balance. Select the Vishay DG405DJ-E3 when that ordering code has established traceability or qualification for the target supply chain, but verify control polarity, supply limits, timing, and temperature ratings before substitution. The Vishay DG405DJ legacy record provides another documented sourcing identity with the same 45 Ω and PDIP configuration. None of these choices should be treated as a substitute for a switch with substantially lower on-resistance, higher bandwidth, lower leakage, or a smaller surface-mount package; choose such a part only when a PCB redesign and new signal-integrity analysis are acceptable.

代替品との比較

パラメータ この製品 DG405DJ DG405DJ-E3
Brand Analog Devices Vishay Intertechnology Vishay Intertechnology
Package 16-pin PDIP 16-pin PDIP 16-pin PDIP
Number of Circuits 2 circuits 2 circuits 2 circuits
Switch Configuration 2:1 per channel 2:1 per channel 2:1 per channel
Maximum On-Resistance 45 ohm 45 ohm 45 ohm
Typical On-Resistance 20 ohm 20 ohm 20 ohm
On-Resistance Matching Between Switches 2 ohm maximum 2 ohm maximum 2 ohm maximum
On-Resistance Flatness Over Signal Range 3 ohm maximum 3 ohm maximum 3 ohm maximum
Switch Type Normally open Normally open Normally open
Technology CMOS CMOS CMOS

主な差別化要因

  • Guaranteed channel-to-channel on-resistance matching (vs DG405DJ-E3)
  • Defined on-resistance flatness across the signal range (vs DG405DJ)
  • Dual 2:1 architecture in a through-hole package (vs DG405DJ-E3)

設計ノート

Treat the DG405DJ+ as a resistance with parasitic capacitance rather than as an ideal conductor. Its 20 Ω typical and 45 Ω maximum on-resistance can create measurable division with source and load impedances, while the 3 Ω maximum flatness specification limits signal-dependent resistance variation. Keep traces short, terminate them according to the system impedance, and verify settling at the highest input frequency. Place sensitive nodes away from control traces to reduce capacitive coupling during switching.

Route the two switched paths and common nodes directly to their intended destinations, avoiding shared narrow segments between switch pins. Keep the 16-pin PDIP footprint consistent with the package drawing and pin numbering, and maintain adequate spacing between high-impedance signal traces and adjacent control or supply conductors. If the analog source impedance is high, minimize parasitic capacitance by keeping the IC and routed nodes away from connectors, regulators, and digital timing circuits.

Do not select the switch from DC on-resistance alone. Confirm bandwidth, off-state isolation, leakage, charge injection, switching time, supply voltage, and control thresholds in the DG405 datasheet. The normally open configuration is also not interchangeable with a normally closed or break-before-make arrangement without a logic review. For replacement parts, compare every terminal function and control polarity instead of assuming that identical PDIP pin counts guarantee compatibility.

Use the manufacturer-specified bypass capacitors and place them close to the supply and ground pins. Keep return-current paths short so switching activity does not inject additional disturbance into sensitive analog circuitry. Estimate the device dissipation from the actual supply voltage and control state, then verify that the operating temperature and leakage limits remain acceptable. For battery-powered or portable designs, account for both active-state current and leakage when evaluating the overall power budget.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Yes
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The component listing identifies DG405DJ+ as RoHS compliant and lead free. AEC-Q100 is not applicable to this general-purpose analog switch.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

DG405DJ+ datasheet DG405DJ+ specifications DG405DJ+ pinout DG405DJ+ datasheet pdf DG405DJ+ equivalent DG405DJ+ replacement DG405DJ+ drop-in substitute DG405DJ+ DIP-16 analog switch DG405DJ+ price DG405DJ+ stock DG405DJ+ lead time Analog Devices DG405DJ+ DG405DJ+ 45 ohm switch DG405DJ+ application circuit DG405DJ+ vs DG405DJ-E3

関連部品&用語

Analog Devices DG405DJ+ DG405DJ DG405DJ-E3 DG405 Vishay Intertechnology Maxim Integrated Siliconix TEMIC dual analog switch 2:1 analog switch CMOS analog switch normally open switch analog multiplexer signal routing on-resistance on-resistance matching on-resistance flatness off-state isolation charge injection 16-pin PDIP PDIP package through-hole mounting RoHS lead-free electronics
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示