Maxim Integrated

DG421DY+ - Dual Latching SPST Switch | Maxim Integrated

部品番号: DG421DY+ ✓ 生産中
35 ohm Rds(on) SOP Package
MOQ: 1 |

DG421DY+ 概要

The Maxim Integrated DG421DY+ is a two-circuit, 1:1 CMOS analog switch with latching control in a 16-pin SOP package. Its principal electrical ratings include a maximum on-resistance of 35 ohms, guaranteed on-resistance matching of 3 ohms maximum between switches, and on-resistance flatness of 4 ohms maximum over the signal range. The device is intended for industrial-temperature signal-routing systems where two independently controlled SPST paths must occupy one compact package.

An analog switch is a semiconductor device that connects or disconnects signal paths under digital control. The DG421DY+ belongs to the analog switch hierarchy, where a CMOS switch is an interface IC used for multiplexing, sampling, test, and signal routing. Its latching control preserves the commanded switch state, making it useful when system logic must remain stable during power-management transitions or when control lines are shared with other bus circuitry.

The two-circuit configuration provides separate 1:1 signal paths rather than a multiplexer arrangement. Guaranteed matching between the two switches limits channel-to-channel variation in on-resistance, while the 4-ohm maximum flatness specification limits resistance changes across the signal range. These characteristics are relevant when attenuation, insertion loss, or signal integrity must remain reasonably consistent between selected channels.

The DG421DY+ is manufactured as a low-power CMOS analog switch using Maxim Integrated's monolithic switch design. Latch-based operation separates the stored control state from the immediate logic level applied to the device. As a result, a control input can be pulsed without unintentionally changing the routing state after the command has been accepted, provided the application observes the timing and supply conditions specified in the manufacturer datasheet.

Typical uses include battery-powered instrumentation, automated test equipment, analog signal multiplexing, sample-and-hold systems, and communication equipment that requires isolated SPST routing. The device can also support circuits where different sensors, amplifiers, or measurement channels must be connected selectively while keeping the routing state stable between control transactions.

Designers should account for supply voltage, input-signal range, switching transients, control timing, and the effect of 35-ohm maximum on-resistance when calculating signal loss. The 16-pin SOP package requires adequate board spacing and careful routing of control and analog traces. Decoupling and grounding practices should follow the application guidance in the Maxim Integrated datasheet.

This product page combines the switch configuration, resistance characteristics, package details, application guidance, and drop-in qualification information into an engineering-oriented reference for analog routing designs.

ドロップイン代替品: DG421DY+ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

DG421DY

✅ ドロップイン ⚠️ 仕様未検証
📦 16-SOIC
Same two-circuit 1:1 latching CMOS switch function, 16-pin SOIC footprint, and stated key ratings; ordering or finish suffix differs by 0% in the compared electrical parameters.

📋 参考代替品(カタログ未掲載)

DG421DY+ 最大定格&電気的特性

Number of Circuits 2 circuits
Switch Configuration 1:1
Switch Type SPST
Maximum On-Resistance 35 ohm
On-Resistance Matching 3 ohm maximum between switches
On-Resistance Flatness 4 ohm maximum over signal range
Process Technology CMOS
Control Method Latch-based
Temperature Grade Industrial
Number of Terminals 16 terminals
Package Code SOP
Package Shape Rectangular
実装タイプ Surface mount
Manufacturer Maxim Integrated

DG421DY+ rectangular ピン配置ガイド

DG421DY+ (rectangular パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

DG421DY+ の rectangular パッケージピン配置図

詳細なピン配置データはありません: DG421DY+.

詳細は データシート をご参照ください。

主な用途

DG421DY+ の用途: 6 件s: Battery-Powered Measurement Systems, Automated Test Equipment, Sensor Signal Multiplexing, Sample-and-Hold Signal Routing, Communication Signal Isolation, Industrial Control Signal Routing.

🔋

Battery-Powered Measurement Systems

The DG421DY+ fits battery-powered measurement systems that require two independently switched analog paths and stable routing between control updates. Its latching CMOS control preserves the selected state, while the 35-ohm maximum on-resistance provides a defined basis for calculating insertion loss. According to the Maxim Integrated datasheet, the two channels are 1:1 SPST switches with guaranteed matching of 3 ohms maximum, which helps maintain similar attenuation between selected channels. Place the device close to the sensor or amplifier input, keep analog traces short, and include bypass capacitance and grounding consistent with the manufacturer application guidance.

🖥️

Automated Test Equipment

The DG421DY+ can route two test signals in automated test equipment when a compact SPST connection and latching control are preferred. Its two independent 1:1 circuits allow a fixture to isolate or connect a measurement path, while 3-ohm maximum matching between switches limits channel-dependent error. The 35-ohm maximum on-resistance must be included in the expected signal attenuation, especially for high-impedance sources. Keep the analog routing compact, separate control traces from sensitive inputs, and follow the Maxim Integrated datasheet for supply bypassing and control timing.

🧩

Sensor Signal Multiplexing

The DG421DY+ is appropriate for two-channel sensor multiplexing when each sensor must be connected to a common analog front end through an SPST path. Latching control helps preserve the selected channel between system updates, and the guaranteed 3-ohm maximum switch-to-switch matching limits channel-to-channel resistance variation. According to the Maxim Integrated datasheet, the maximum on-resistance is 35 ohms and flatness is 4 ohms maximum over the signal range. Account for this resistance in the transducer excitation and input-impedance budget, and maintain a quiet return path to reduce coupling into high-impedance sensor nodes.

📈

Sample-and-Hold Signal Routing

The DG421DY+ can connect or disconnect an analog source in a sample-and-hold front end where two SPST paths and latching state are useful. The 35-ohm maximum on-resistance contributes directly to source attenuation and should be compared with the sampling capacitor's effective input impedance. The manufacturer datasheet also specifies 3-ohm maximum matching between switches and 4-ohm maximum flatness, allowing more consistent behavior across the two routes. Place the switch near the sampling network, use short grounded traces, and control switching transients so they do not couple into the held capacitor node.

🌐

Communication Signal Isolation

The DG421DY+ is suitable for isolating one of two communication or instrumentation lines through SPST routing. Its latching control reduces the need to maintain a continuously asserted command level, while guaranteed matching of 3 ohms maximum supports consistent behavior between the two paths. The 35-ohm maximum on-resistance can create signal attenuation and bandwidth limits, so the design should verify that the source impedance and operating frequency remain acceptable. Keep return paths continuous, use a controlled ground reference, and place the switch close to the protected signal path to limit pickup on long traces.

🏭

Industrial Control Signal Routing

The DG421DY+ supports industrial control boards that need two isolated analog routing paths with a retained command state. Its industrial temperature grade, surface-mount 16-pin SOP package, and CMOS implementation align with compact embedded control systems. According to the Maxim Integrated datasheet, the switch provides 1:1 SPST paths, 35-ohm maximum on-resistance, and guaranteed matching and flatness characteristics for predictable routing behavior. Designers should still verify the exact operating voltage and temperature limits, protect external control lines from inappropriate transients, and use the pin-description table to implement supply and ground connections correctly.

What is the DG421DY+?
The DG421DY+ is a two-circuit, 1:1 CMOS analog switch with SPST switch elements and latching control. According to the Maxim Integrated datasheet, it provides a maximum on-resistance of 35 ohms, guaranteed on-resistance matching of 3 ohms maximum between switches, and on-resistance flatness of 4 ohms maximum over the signal range. It is packaged in a 16-pin SOP.
Where can I download the DG421DY+ datasheet PDF?
The DG421DY+ datasheet information is available from the Maxim Integrated document catalog linked on this page. According to the manufacturer datasheet, the DG421 family consists of low-power CMOS analog switches with latches, and the DG421DY+ uses a 16-pin SOP package. Use the pin-description table in the manufacturer document when assigning control, supply, ground, and analog-switch terminals.
Where can I find the DG421DY+ pinout?
The DG421DY+ pinout must be taken from the Maxim Integrated datasheet because the manufacturer documentation is the controlling source for terminal numbering and signal names. The device uses a 16-terminal SOP package. Do not infer connections from the DG423 or DG425 family diagrams, because their switching configurations differ even though all three devices appear in the same product family.
What are the key specifications of DG421DY+ that engineers should know?
The key DG421DY+ specifications are two 1:1 SPST circuits, a 35-ohm maximum on-resistance, 3-ohm maximum matching between switches, 4-ohm maximum flatness over the signal range, CMOS construction, latching control, and a 16-pin SOP package. According to the Maxim Integrated datasheet, matching and flatness are guaranteed characteristics that help control channel-to-channel and within-channel resistance variation.
Where to buy DG421DY+ online?
Use the Request a Quote form on this page to request DG421DY+ availability, order quantities, and current lead time. The manufacturer datasheet identifies the DG421DY+ as a Maxim Integrated 16-pin SOP device with two 1:1 CMOS SPST switch circuits. XAIPART can confirm the appropriate sourcing configuration against the requested quantity and delivery schedule.
What is the price of DG421DY+?
The current DG421DY+ price is handled through the Request a Quote form on this page. Submit the required quantity, package configuration, and delivery target to obtain a current quotation. The device is a two-circuit 1:1 CMOS analog switch in a 16-pin SOP package, with a 35-ohm maximum on-resistance according to the Maxim Integrated datasheet.
What is the lead time for DG421DY+?
Submit a Request a Quote to this page with the required quantity and delivery schedule for a current DG421DY+ lead-time confirmation. The product is identified as an industrial-temperature, surface-mount 16-pin SOP analog switch. The manufacturer datasheet provides the electrical and control requirements needed to qualify the part while the commercial team confirms production and shipment timing.
Is DG421DY+ in stock?
Use the Request a Quote form on this page to check current DG421DY+ stock and allocation for your requested quantity. The Maxim Integrated datasheet describes the DG421DY+ as a two-circuit, 1:1 latching CMOS analog switch in a 16-pin SOP package. A stock response should be tied to the exact quantity and delivery schedule in your quotation request.
What is the difference between DG421DY+ and DG421DY?
The DG421DY+ and DG421DY share the DG421 function, electrical topology, and 16-pin SOP package, while the ordering suffix can indicate different manufacturing or terminal-finish conventions. According to the Maxim Integrated documentation, both are associated with improved low-power CMOS analog switches with latches. Confirm the exact ordering code and regulatory finish on the manufacturer label before substituting one for the other.
When should I choose DG421DY+ over another Maxim Integrated analog switch?
Choose the DG421DY+ when the design needs two independent 1:1 SPST paths, latching control, and a 16-pin SOP package. According to the Maxim Integrated datasheet, its guaranteed 3-ohm maximum matching between switches and 4-ohm maximum flatness are useful when channel-to-channel resistance consistency matters. Select another family member instead when the required switch count or configuration differs.
Is DG421DY+ suitable for battery-powered instrumentation?
The DG421DY+ is suitable for battery-powered instrumentation when its specified supply range and switching behavior fit the design. According to the Maxim Integrated datasheet, it is a low-power CMOS analog switch with latching control, two 1:1 SPST paths, and a maximum on-resistance of 35 ohms. The latch can preserve routing between control events, while the 35-ohm resistance limit must be included in the signal-loss budget.
What can replace DG421DY+?
The closest same-family replacement is DG421DY when its exact ordering and finish requirements are acceptable. Both devices use the 16-pin SOP package and implement the same two-circuit 1:1 latching CMOS switch function, with a 100% match for the stated key ratings. No other cross-brand part is presented as a drop-in replacement because the cross-reference search did not establish its terminal compatibility.
Is DG421DY+ the same as DG419DY+?
No. The DG421DY+ is a two-circuit 1:1 SPST analog switch in a 16-pin SOP package, whereas DG419DY+ belongs to a different member of the Maxim Integrated low-power CMOS switch family. According to the manufacturer datasheet, DG421-family devices are latching switches. Treat DG419DY+ as a functional-family comparison, not a confirmed pin-for-pin replacement.
What is the best Maxim Integrated equivalent for DG421DY+?
The best same-package Maxim Integrated equivalent identified for the DG421DY+ is the DG421DY, because it retains the two-circuit 1:1 latching-switch function and 16-pin SOP package. According to the Maxim Integrated datasheet, the core electrical characteristics are unchanged, supporting a 100% key-parameter match. The distinction is the ordering or finish suffix, which must match procurement and labeling requirements.
Where is the dg421 dg521 dg721 nm-b241 boardview?
The dg421 dg521 dg721 nm-b241 boardview query points to a board-level service document rather than a component datasheet. The DG421DY+ itself is a Maxim Integrated two-circuit 1:1 latching CMOS analog switch with a 35-ohm maximum on-resistance in a 16-pin SOP package. When recovering the boardview, confirm that the displayed DG421 package outline and terminal numbering correspond to the 16-pin device rather than another DG-series configuration.
Where is the dg421 dg521 dg721 nm-b241 schematic?
The dg421 dg521 dg721 nm-b241 schematic query refers to board documentation that groups several switch families. For the DG421DY+, the manufacturer datasheet identifies a 16-pin SOP package with two 1:1 SPST circuits, latching control, and a 35-ohm maximum on-resistance. Use the boardview and schematic together to distinguish the exact DG421 footprint from DG521 and DG721 configurations before assigning connections.
Where is the dg421 dg521 dg721 nm-b242 bios?
The dg421 dg521 dg721 nm-b242 bios query refers to firmware-level board information, where switch configuration and control sequencing can be documented. The DG421DY+ itself is a Maxim Integrated low-power CMOS analog switch with two 1:1 SPST paths and latching control in a 16-pin SOP package. Confirm the board's package mapping and latch timing before applying BIOS behavior to a replacement board.

エンジニアリング参考データ: DG421DY+ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose DG421DY+ when the board needs two independent 1:1 SPST paths, latching control, and a 16-pin SOP footprint. Its 35-ohm maximum on-resistance, 3-ohm maximum channel matching, and 4-ohm maximum flatness make it appropriate for instrumentation, sensor routing, sampling, and test systems where consistent resistance behavior is important. DG421DY is the closest same-family ordering alternative because it retains the same function and package, but its suffix and finish requirements must be checked before substitution. Do not select DG419DY+, DG408DY+, or DG418DJ+ as drop-in replacements for this two-circuit 16-pin design without a complete terminal and configuration review. If a different switch count, resistance, supply range, or footprint is required, evaluate another member of the broader Maxim Integrated CMOS switch family instead.

代替品との比較

パラメータ この製品 DG421DY
Brand Maxim Integrated Maxim Integrated
Package 16-SOIC 16-SOIC - same
Number of Circuits 2 circuits 2 circuits
Switch Configuration 1:1 1:1
Switch Type SPST SPST
Maximum On-Resistance 35 ohm 35 ohm
On-Resistance Matching 3 ohm maximum between switches 3 ohm maximum between switches
On-Resistance Flatness 4 ohm maximum over signal range 4 ohm maximum over signal range
Process Technology CMOS CMOS
Control Method Latch-based Latch-based

主な差別化要因

  • Two latching SPST circuits in one package (vs DG419DY+)
  • Guaranteed channel-to-channel resistance matching (vs DG421DY)
  • Signal-range resistance flatness (vs DG421DY)

設計ノート

Place the DG421DY+ close to the switched analog node so the 35-ohm maximum on-resistance is not compounded by PCB trace resistance. Keep input and output analog paths short and pair them with a continuous ground reference. Route latch-control signals away from sensitive analog conductors to reduce coupling from control transitions into the selected channel.

Do not treat the DG423 or DG425 family diagrams as substitutes for the DG421 pin description; the switch configurations differ even though the devices share a family designation. Use the Maxim Integrated datasheet to identify supply, ground, control, and analog terminals. Also verify the control pulse width and latch behavior before assuming that a momentary command can be used safely.

Include the 35-ohm maximum on-resistance in the source-load and attenuation calculation, then check bandwidth against the switch impedance and parasitic capacitance. For sampling nodes, account for both the switch resistance and the load presented by the capacitor or amplifier input. The 3-ohm maximum matching and 4-ohm maximum flatness figures help assess channel variation but do not remove the need for an application-specific impedance analysis.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The Maxim Integrated datasheet identifies an industrial-temperature CMOS analog switch, but it does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

dg421 dg521 dg721 nm-b241 boardview dg421 dg521 dg721 nm-b241 schematic dg421 dg521 dg721 nm-b242 bios DG421DY+ datasheet DG421DY+ datasheet pdf DG421DY+ pinout Maxim Integrated DG421DY+ DG421DY+ 35 ohm analog switch DG421DY+ 16-SOIC DG421DY+ equivalent DG421DY+ replacement DG421DY+ vs DG421DY DG421DY+ application circuit DG421DY+ price DG421DY+ stock

関連部品&用語

Maxim Integrated DG421DY+ DG421DY DG419DY+ DG418DJ+ DG408DY+ DG444DJ+ analog switch CMOS analog switch SPST switch latching analog switch interface IC semiconductor 16-SOIC SOP package surface-mount package on-resistance on-resistance matching on-resistance flatness signal routing sensor multiplexing sample-and-hold industrial temperature grade RoHS REACH
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示