Analog Devices

DG444DY+T - 85Ω Quad SPST Analog Switch | Analog Devices

部品番号: DG444DY+T ✓ 生産中
85Ω Rds(on) 16-pin SOIC Package
MOQ: 1 |

DG444DY+T 概要

The Analog Devices DG444DY+T is a four-channel, 1:1 single-pole single-throw CMOS analog switch with 85Ω on-resistance, housed in a 16-pin SOIC package. Each of its four independent switches routes a signal without changing its basic direction, while TTL- and CMOS-compatible control inputs support modern digital control systems. The device is intended for precision signal-routing, test, measurement, communication, and industrial-control systems where compact packaging and four channels in one IC reduce board area.

An analog switch is a semiconductor device that uses control signals to connect or disconnect an analog signal path. A SPST switch provides one conducting path when enabled and an open circuit when disabled. The DG444 belongs to the analog-switch category within interface ICs and semiconductor devices. Four independent SPST switches packaged together allow one control IC to manage multiple test points, sensor inputs, acquisition channels, or signal-isolation paths without requiring four separate switch packages.

The DG444 family provides specified on-resistance matching of 4Ω maximum between switches and guaranteed on-resistance flatness of 9Ω maximum over the signal range. These characteristics reduce channel-to-channel variation and distortion when the same switch IC performs multiple measurements or routes comparable signal amplitudes. The 85Ω on-resistance identifies the part as suitable for many general-purpose analog-routing tasks where low resistance is not the primary requirement.

The monolithic CMOS implementation combines four independent switches in one package. According to the Renesas DG444/DG445 datasheet, the family uses TTL- and CMOS-compatible digital inputs, allowing direct control from common logic families. The Vishay DG444 documentation also identifies a high-voltage silicon-gate process and an epitaxial layer intended to prevent latchup. These characteristics make controlled signal routing possible while improving robustness in systems where static or transient electrical conditions must be considered.

Typical applications include automated test-equipment routing, data-acquisition systems, industrial measurement interfaces, sample-and-hold circuitry, and communication equipment. Quad SPST architecture is especially useful when a system must select between multiple external lines while keeping control logic compact. The 16-pin SOIC package also suits conventional surface-mount PCB assembly and provides adequate pin density for four control inputs and eight signal terminals.

For layout, route each switched signal with a short and continuous trace to minimize parasitic capacitance and resistance. Place input and output decoupling near the associated supply pins, and keep control traces away from sensitive analog nodes to reduce capacitive coupling. Check the control logic levels, allowable analog signal range, and on-state behavior in the manufacturer datasheet before finalizing the schematic or substituting a different switch implementation.

This product page combines the manufacturer family information with distributor package details, pin-compatible replacement analysis, parameter comparisons, and practical PCB guidance. It is designed to help engineers identify the correct switch function, verify footprint compatibility, and plan signal-routing layouts for new or existing circuit-board designs.

ドロップイン代替品: DG444DY+T — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: DG444DY+T (同一形状・フットプリント) — 相違点: Switch Configuration, On-Resistance Flatness Over Signal Range, On-Resistance Matching Between Switches, Package, Latchup Protection.

Analog Devices
Switch Configuration: 1:1 SPST
On-Resistance Flatness Over Signal Range: 9 ohm maximum
On-Resistance Matching Between Switches: 4 ohm maximum
比較対象 DG444DY+T →
Maxim Integrated
Switch Configuration: SPST
On-Resistance Flatness Over Signal Range: 9 ohm maximum
On-Resistance Matching Between Switches: 4 ohm maximum
比較対象 DG444DY+T →

DG444CY+

✅ ドロップイン
Analog Devices
📦 16-pin SOIC
Quad SPST analog switch IC · 4 circuits · 1:1 SPST · 85 ohm · 4 ohm maximum · 9 ohm maximum · Bidirectional analog channel · Supported

価格はお問い合わせください

データシートを見る →

ADG444ABRZ

✅ ドロップイン
📦 16-pin SOIC
Same 16-pin SOIC four-channel switch family; exact on-resistance, supply range, and control-polarity differences require datasheet confirmation

📋 参考代替品(カタログ未掲載)

DG444DY-T1-E3

✅ ドロップイン
📦 16-pin SOIC
Same 16-pin SOIC footprint and listed 85Ω on-resistance; detailed control, leakage, and timing limits differ

📋 参考代替品(カタログ未掲載)

DG444DY+

✅ ドロップイン
Maxim Integrated
📦 16-pin SOIC
4 · SPST · 4 ohm maximum · 9 ohm maximum · 85 ohm · 250 ns · TTL and CMOS compatible · High-voltage silicon-gate CMOS

価格はお問い合わせください

データシートを見る →

DG444DY-T

✅ ドロップイン
📦 16-pin SOIC
Same DG444 four-channel SPST family and 16-pin SOIC footprint; order suffix and detailed electrical limits differ

📋 参考代替品(カタログ未掲載)

DG444DY+T 最大定格&電気的特性

Number of Switches 4 circuits
Switch Configuration 1:1
Switch Function SPST
On-Resistance 85Ω
On-Resistance Matching Between Switches 4Ω maximum
On-Resistance Flatness Over Signal Range 9Ω maximum
Logic Compatibility TTL and CMOS compatible
パッケージ 16-pin SOIC
ピン数 16 pins
実装タイプ Surface-mount
Temperature Grade Industrial
Process Technology High-voltage silicon-gate CMOS
Latchup Protection Epitaxial layer intended to prevent latchup

DG444DY+T 16-pin soic ピン配置ガイド

DG444DY+T (16-pin soic パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

DG444DY+T の 16-pin soic パッケージピン配置図

詳細なピン配置データはありません: DG444DY+T.

詳細は データシート をご参照ください。

主な用途

DG444DY+T の用途: 6 件s: Automated Test Equipment Signal Routing, Data Acquisition and Measurement Systems, Industrial Sensor Interface, Communication Signal Switching, Sample-and-Hold Signal Control, Portable Measurement Instruments.

🏭

Automated Test Equipment Signal Routing

The DG444DY+T is appropriate for automated test-equipment routing because four independent SPST switches can connect several test paths while the system controls each switch separately. Its specified 4Ω maximum on-resistance matching between switches helps maintain consistency across similar channels, while the 9Ω maximum on-resistance flatness limit controls channel variation over the signal range. The 16-pin SOIC package also allows the routing function to fit compactly beside the instrumentation front end. Before implementation, verify leakage, switching time, charge injection, and allowable signal voltage for the test-node voltages used by the equipment.

📊

Data Acquisition and Measurement Systems

In a data-acquisition system, the DG444DY+T can route multiple sensor or test signals into a shared measurement channel without requiring a separate physical switch for every line. Four independently controlled SPST paths simplify multiplexing architecture and reduce the number of packages on the PCB. On-resistance matching of 4Ω maximum is useful when channel consistency affects readings, while the 85Ω nominal on-resistance should be included in the input-impedance and settling calculations. The designer should confirm leakage, switching time, input capacitance, and off-state behavior against the selected amplifier and sensor impedance.

🧩

Industrial Sensor Interface

The DG444DY+T can isolate and route sensor lines in industrial measurement equipment where multiple inputs share a common analog-processing chain. Its four independent SPST channels support per-signal enable control, and the controlled channel matching helps preserve consistent behavior across comparable sensor paths. The 85Ω on-resistance may be acceptable for relatively high-impedance sensors but can create an input-divider error with lower source impedances. Confirm the exact signal range, leakage, supply voltage, and control thresholds in the manufacturer datasheet, especially for long cable runs and exposed industrial interfaces.

🌐

Communication Signal Switching

The DG444DY+T can be used in communication equipment to switch among external lines, test loops, or alternative termination paths. Four SPST switches in one 16-pin SOIC reduce component count and provide independent control over each route. The family's TTL- and CMOS-compatible inputs simplify connection with control logic, although the valid supply and input levels must be checked for the operating condition. For high-speed signals, the 85Ω on-resistance and package parasitics require signal-integrity analysis; for lower-rate lines, verify switching time and off-state leakage before finalizing the layout.

🔧

Sample-and-Hold Signal Control

The DG444DY+T is useful in sample-and-hold and capacitor-selection circuits because four SPST switches can connect distinct signals to a common node under independent control. When switching a sampling capacitor, leakage, charge injection, and switch off-state behavior can directly affect accuracy, so those characteristics must be taken from the family datasheet. The 4Ω maximum matching specification helps when several channels are expected to behave similarly. Keep the switched node compact, provide suitable return paths, and avoid routing the high-impedance node next to fast digital control traces.

📱

Portable Measurement Instruments

A portable measurement instrument can use the DG444DY+T to route several external inputs while preserving a compact surface-mount layout. The device's four-channel SPST organization replaces four individual switch packages and centralizes control, while the 16-pin SOIC outline is compatible with conventional PCB assembly methods. Because portable instruments may operate from limited supplies and may expose the switch to user-connected sources, verify the exact supply range, analog signal limits, leakage, and control thresholds. Also consider whether the 85Ω on-resistance is low enough for the selected source impedance.

おすすめ製品の概要

DG444DY-T1-E3 Pin-compatible quad-SPST routing alternative 使用用途: Automated Test Equipment Signal Routing, Industrial Sensor Interface, Sample-and-Hold Signal Control ADG444ABRZ Related four-channel switch for redesign evaluation 使用用途: Automated Test Equipment Signal Routing, Communication Signal Switching DG444CY+ Analog Devices 使用用途: Data Acquisition and Measurement Systems, Communication Signal Switching, Portable Measurement Instruments DG444DY-T Quad-SPST routing alternative 使用用途: Data Acquisition and Measurement Systems, Sample-and-Hold Signal Control DG444DY Four-channel SPST interface option 使用用途: Industrial Sensor Interface, Portable Measurement Instruments
What is the DG444DY+T and what are its key specifications?
The DG444DY+T is a four-channel, 1:1 SPST CMOS analog switch with 85Ω on-resistance in a 16-pin SOIC package. According to the Analog Devices DG444 product page, the redesigned family also provides on-resistance matching of 4Ω maximum between switches and on-resistance flatness of 9Ω maximum over the signal range. These specifications make it a practical four-line routing device for general-purpose analog and test-signal applications.
Where can I download the DG444DY+T datasheet PDF?
The official DG444DY+T documentation is available through the Analog Devices DG444 product page at https://www.analog.com/en/products/dg444.html. The page provides manufacturer data and links to the family documentation. When designing the circuit, use the pin-description and electrical-characteristics tables for exact supply limits, control thresholds, leakage, switching time, and analog signal-range conditions.
Where can I find the DG444DY+T pinout?
The DG444DY+T uses a 16-pin SOIC package, with eight signal terminals and four control terminals serving the four independent SPST switches. Use the manufacturer pin-description table when assigning connections because pin functions must not be inferred solely from the package outline. The detailed pin map is not reproduced on this page; consult the official DG444 family datasheet before routing the PCB.
Is the DG444DY+T pin-compatible with DG444DY-T1-E3?
The DG444DY-T1-E3 is a Vishay Siliconix 4-circuit, 1:1, 85Ω switch in a 16-SOIC package, matching the DG444DY+T package and principal routing characteristics. Cross-reference information identifies the devices as electrically and pin compatible. Production substitution should still confirm control polarity, supply-voltage limits, leakage, switching timing, and the complete pin description against the relevant manufacturer datasheet.
What can replace DG444DY+T on the same PCB footprint?
Pin-compatible 16-pin SOIC alternatives include DG444CY+, DG444DY-T1-E3, DG444DY, Renesas DG444DY, and ADG444ABRZ. Each candidate must be checked for SPST versus SPDT behavior, control polarity, supply range, on-resistance, leakage, and timing. The listed options are footprint-level drop-ins, but the exact functional match depends on the operating requirements of the original circuit.
What is the best Vishay replacement for DG444DY+T?
The Vishay DG444DY-T1-E3 is the closest named cross-brand replacement because it is listed as a four-circuit, 1:1, 85Ω SPST switch in a 16-pin SOIC package. It retains the same package and principal on-resistance value of the DG444DY+T. Confirm control-input polarity and all voltage, leakage, and timing limits in the Vishay datasheet before approving it for production.
DG444DY+T vs DG444CY+ - which switch should I choose?
Both devices use a narrow 16-pin SOIC and implement four SPST analog switches, so they can share the same PCB footprint. The DG444DY+T is identified as the improved quad-SPST member, while DG444CY+ is described as an improved quad-SPST alternative with consistent terminals and package. Choose according to the control polarity, supply range, on-resistance, leakage, and timing requirements in each datasheet.
When should I choose DG444DY+T over DG444DY-T1-E3?
Choose the DG444DY+T when an Analog Devices or Maxim Integrated supply chain and its 16-pin SOIC footprint are preferred for a four-channel SPST routing function. Choose the DG444DY-T1-E3 when Vishay sourcing is strategically preferred or required. Both are identified as 4-circuit, 1:1, 85Ω switches in 16-SOIC packages, but control polarity and detailed electrical limits should determine final qualification.
Is DG444DY+T suitable for automated test equipment?
The DG444DY+T is suitable for automated test-equipment signal routing because it combines four independent SPST switches with controlled on-resistance matching of 4Ω maximum. That matching helps maintain more consistent channel behavior across multiple routed paths. For precision measurement systems, verify leakage, switching time, charge injection, allowable signal voltage, and input logic thresholds in the manufacturer datasheet.
What design considerations matter when laying out DG444DY+T?
Keep switched-signal traces short and continuous to minimize parasitic resistance and capacitance, and place supply decoupling close to the device. Route control inputs away from high-impedance analog nodes to reduce capacitive feedthrough into the switched path. Also confirm that the PCB land pattern matches the 16-pin SOIC dimensions and that the control polarity matches the firmware driving the four switches.
Where can I buy DG444DY+T online and check its lead time?
Use the Request a Quote form on this page to request DG444DY+T availability, current lead time, and order quantities from XAIPART. The form is the appropriate route for a quote because stock and commercial terms can change by package quantity and market conditions. Provide the required reel quantity, assembly schedule, and any required qualification conditions in the request.
What is the price of DG444DY+T?
The current commercial price for DG444DY+T is not stated as a static figure on this page because quotations and availability can change with order quantity and market conditions. Submit the part number and required quantity through the Request a Quote form on this page. That form provides the current purchasing response without embedding a potentially stale price in the technical description.
Is DG444DY+T in stock and what is its lead time?
Current DG444DY+T stock and lead time should be confirmed through the Request a Quote form on this page rather than inferred from a distributor product page. A listing marked as available does not guarantee the same lead time for your reel quantity. Include your required delivery date and forecast quantities so the supplier can confirm the appropriate schedule.
Does DG444DY+T support TTL and CMOS control signals?
The DG444DY+T supports TTL- and CMOS-compatible digital inputs, as stated in the Renesas DG444/DG445 family datasheet. This compatibility allows the four control inputs to be driven by common digital logic while the analog paths are routed. The control thresholds and input voltage limits should still be checked for the specific supply condition used in the finished design.
What is the difference between DG444DY+T and ADG444ABRZ?
The DG444DY+T is a four-channel SPST analog switch with 85Ω on-resistance in a 16-pin SOIC package, while ADG444ABRZ appears in a cross-reference comparison with DG444DY. The comparison establishes a related switch family, but detailed differences must be verified from each datasheet. Pay particular attention to control polarity, on-resistance, leakage, supply range, timing, and the exact terminal assignments.

エンジニアリング参考データ: DG444DY+T — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the DG444DY+T for a compact four-channel SPST routing function when you value the Analog Devices or Maxim Integrated family, specified on-resistance matching of 4Ω maximum, and 16-pin SOIC integration. DG444CY+ is a same-brand option when its particular control polarity and electrical limits better fit the design; verify it rather than assuming identical behavior. ADG444ABRZ may suit a related four-channel switch redesign when its on-resistance, supply range, and timing are acceptable. Use DG444DY-T1-E3 when Vishay sourcing is preferred because it has the same 16-SOIC footprint and listed 85Ω on-resistance, but check leakage and control details. Renesas DG444DY-T is another family-level option with the same 16-pin SOIC format. For every replacement, confirm SPST operation, pin assignments, control polarity, analog signal range, leakage, switching time, and lifecycle requirements before production release.

代替品との比較

パラメータ この製品 DG444CY+ ADG444ABRZ DG444DY-T1-E3 DG444DY DG444DY-T
Brand Analog Devices Analog Devices Analog Devices Vishay Intertechnology Vishay Intertechnology Renesas Electronics
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Number of Switches 4 circuits 4 channels 4 channels 4 circuits 4 circuits 4 channels
Switch Function Quad SPST Quad SPST Quad SPST Quad SPST Quad SPST Quad SPST
Mounting Type Surface-mount Surface-mount Surface-mount Surface-mount Surface-mount Surface-mount

主な差別化要因

  • Four independently controlled SPST paths in one package (vs ADG444ABRZ)
  • Specified channel-to-channel on-resistance matching (vs DG444DY-T1-E3)
  • Guaranteed on-resistance flatness (vs DG444DY)

設計ノート

Keep each switched analog path short and use a continuous reference plane beneath it. The 85Ω on-resistance is acceptable for many high-impedance sources, but trace resistance and parasitic capacitance can degrade settling and isolation. Route the four control inputs together where practical, keep them away from the sensitive switched node, and place any input or output filtering close to the switch pins.

Do not assume that every quad-switch IC with a 16-pin SOIC is interchangeable. Confirm that the alternative is SPST rather than SPDT, verify active-high or active-low control polarity, and compare the complete pin assignment. A footprint match does not compensate for incorrect switch behavior. Revalidate supply voltage, analog signal limits, leakage, on-resistance, and timing with the original operating conditions.

For sampled or high-frequency signals, account for switch on-resistance, off-state leakage, charge injection, and switching transient rather than relying only on the 85Ω rating. Use the manufacturer timing and capacitance tables to determine whether settling time is acceptable. If the source impedance is low, include the switch resistance in the gain calculation and place a suitable hold capacitor at the sampling node where the circuit architecture permits.

Place the supply bypass capacitor close to the device and provide a low-impedance return path for all switch currents. Check the datasheet's permitted supply range and control-input thresholds against the logic rail used by the system. Because the four switches may turn on simultaneously, confirm that the surrounding circuitry can tolerate the resulting dynamic current without introducing supply disturbance at the switched nodes.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The available product information identifies the industrial temperature grade and a surface-mount 16-pin SOIC package but does not provide explicit compliance declarations for this exact orderable MPN.

データ検証日: 2026-11-16 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

DG444DY+T datasheet DG444DY+T pinout DG444DY+T datasheet pdf DG444DY+T equivalent DG444DY+T replacement DG444DY+T cross reference DG444DY+T vs DG444CY+ DG444DY+T 85 ohm SPST DG444DY+T SOIC-16 DG444DY+T analog switch Analog Devices DG444DY+T DG444DY+T test equipment DG444DY+T price DG444DY+T stock

関連部品&用語

Analog Devices DG444DY+T DG444CY+ ADG444ABRZ DG444DY-T1-E3 DG444DY Renesas Electronics Vishay Intertechnology Maxim Integrated SPST analog switch 1:1 analog switch interface IC CMOS analog switch on-resistance on-resistance matching on-resistance flatness TTL-compatible control input CMOS-compatible control input 16-pin SOIC SOIC package family surface-mount package automated test equipment data acquisition industrial sensor interface signal routing
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示