DS90CF384SLC - 24-Bit 65MHz LVDS FPD Receiver | Texas Instruments
部品番号: DS90CF384SLC ✓ 生産中DS90CF384SLC 概要
A Flat Panel Display Link receiver is an interface IC that accepts serialized, low-voltage differential signals from a compatible transmitter and reconstructs parallel data for downstream display or graphics logic. In the electronics hierarchy, this function belongs to display interface receivers, which are a subtype of interface ICs and mixed-signal semiconductors. LVDS signaling reduces the voltage swing used to represent data while providing differential noise immunity for high-speed links.
The primary published characteristics of the DS90CF384SLC include a 3.3 V supply, support for a 24-bit FPD-Link interface, operation to 65 MHz, and a 28/4 receiver organization. These attributes place the device in systems requiring the receiver side of a compatible 24-bit LVDS display-link connection. The NFBGA-64 package supports compact PCB layouts, although its fine ball pitch makes careful escape routing and assembly control important.
The DS90CF384SLC is primarily a receiver rather than a transmitter. It therefore belongs in the signal path between an FPD-Link-compatible source, such as a graphics or display controller, and circuitry requiring the recovered parallel data. The manufacturer product page identifies the device as a 24-bit Flat Panel Display Link receiver, while the target ordering code is associated with the 64-NFBGA, 8 mm by 8 mm package.
Typical uses include flat-panel display systems, digital signage, industrial visualization equipment, medical diagnostic displays, automotive display modules, and embedded human-machine-interface panels. In each case, the source device must implement a compatible FPD-Link transmitter and electrical interface, and the PCB must preserve the controlled-impedance differential routing characteristics required by LVDS links.
A key implementation consideration is the 64-ball NFBGA land pattern. Use the manufacturer pin description and package drawing to assign power, ground, differential inputs, and data outputs exactly; do not infer ball assignments from generic BGA libraries. Validate the receiver configuration, signal polarity, clocking arrangement, and display timing against the complete system interface specification before releasing a PCB layout.
This product record consolidates the verified manufacturer identity, package information, interface class, and sourcing context into an engineering reference. It also distinguishes confirmed characteristics from unspecified electrical details, helping designers determine whether the device belongs in a Flat Panel Display Link architecture before committing to layout or production sourcing.
ドロップイン代替品: DS90CF384SLC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストDS90CF384SLC 仕様
| Device Type | 24-bit Flat Panel Display Link receiver |
| 電源電圧 | 3.3 V |
| Interface Standard | Flat Panel Display Link (FPD-Link) |
| Signal Type | LVDS |
| 最大クロック周波数 | 65 MHz |
| Receiver Data Width | 24 bits |
| Receiver Organization | 28/4 receiver |
| パッケージ | 64-NFBGA (8 mm x 8 mm) |
| Package Pin Count | 64 balls |
| 実装タイプ | Surface mount |
DS90CF384SLC 64 balls ピン配置ガイド
DS90CF384SLC (64 balls パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: DS90CF384SLC.
詳細は データシート をご参照ください。
主な用途
DS90CF384SLC の用途: 6 件s: Flat-Panel Display Link Receiver, Industrial Visualization Panel, Medical Diagnostic Display, Automotive Display Module, Digital Signage Controller, Embedded Human-Machine Interface.
Flat-Panel Display Link Receiver
The DS90CF384SLC is positioned at the receiving end of a compatible 24-bit FPD-Link connection because it is specified as a 3.3 V LVDS receiver with operation up to 65 MHz. Place it between a graphics or display source that implements the transmitter function and the parallel receiver logic. Its 28/4 organization must match the source and system data architecture. Because the device uses a 64-NFBGA package, the layout should preserve short differential routes, continuous reference planes, and assembly escape paths that suit the selected board process.
おすすめ
Industrial Visualization Panel
Industrial visualization panels often combine a compact graphics source, a long differential display connection, and local processing electronics. The DS90CF384SLC fits that receive-side role when the source supports a compatible 24-bit FPD-Link interface at up to 65 MHz. The 3.3 V operating supply aligns it with modern logic systems, while the 28/4 receiver configuration must match the transmitted lane arrangement. Validate signal polarity, clocking, refresh timing, and recovery behavior across voltage and temperature conditions before production deployment.
おすすめ
Medical Diagnostic Display
A medical diagnostic display may use a dedicated graphics engine that sends video or control data through a differential link before the recovered data reaches display-processing logic. The DS90CF384SLC can serve as the compatible receive component when the complete interface conforms to its 24-bit FPD-Link, 28/4, and 65 MHz characteristics. System validation should cover image integrity, clock recovery, error margin, and behavior across the required environmental range. Medical use also requires compliance review at the finished-system level rather than relying only on the interface chip’s general status.
おすすめ
Automotive Display Module
Automotive display modules can require a compact receiver that accepts data from a graphics or central-computing source over a differential display link. DS90CF384SLC may fit a 3.3 V, 24-bit FPD-Link architecture operating up to 65 MHz, subject to confirmation of electrical timing, temperature range, and qualification status. The 64-NFBGA package reduces board area compared with many leaded packages but complicates inspection and rework. Automotive production approval therefore requires separate environmental, quality, and traceability evaluation.
おすすめ
Digital Signage Controller
Digital signage controllers commonly distribute image data from a central processor to remote or local display panels. The DS90CF384SLC is applicable at the compatible display endpoint when the transmitter provides the required 24-bit FPD-Link format and operates within the 65 MHz limit. Its 3.3 V supply and receiver-only role make it suitable for systems that already define an LVDS display-link architecture. Designers should verify lane count, 28/4 organization, clock source, signal polarity, refresh behavior, and connector or cable characteristics as part of the end-to-end link design.
おすすめ
Embedded Human-Machine Interface
Embedded HMIs often use a small display controller and a compact PCB where each millimeter matters. The DS90CF384SLC’s 64-NFBGA package supports space-constrained receiver placement, while its 24-bit FPD-Link function and 65 MHz maximum operating frequency address higher-rate serialized display connections. The design must provide the specified 3.3 V supply, an exactly compatible transmitter, and routing that meets LVDS signal-integrity requirements. Confirm BGA assembly capability and plan test access before committing this compact interface arrangement to production.
おすすめ
エンジニアリング参考データ: DS90CF384SLC — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Manufacturer | Texas Instruments / National Semiconductor |
| Package | 64-NFBGA (8 mm x 8 mm) |
| Device Type | 24-bit FPD-Link receiver |
| Supply Voltage | 3.3 V |
| Signal Type | LVDS |
| Maximum Clock Frequency | 65 MHz |
| Receiver Organization | 28/4 receiver |
| Receiver Data Width | 24 bits |
| Mounting Type | Surface mount |
主な差別化要因
- Purpose-built 24-bit FPD-Link receiver function （vs Generic LVDS receiver candidates)
- Published 65 MHz operating capability （vs Lower-speed LVDS receiver candidates)
- Compact 8 mm by 8 mm NFBGA implementation （vs Larger leaded-interface packages)
設計ノート
Route the LVDS differential pairs as tightly coupled, impedance-controlled nets with continuous reference planes and minimal stubs. Avoid placing the receiver behind test pads, connectors, or other structures that interrupt the return path. The verified 65 MHz rating should be used as the starting point for link analysis, but actual trace geometry, dielectric material, pair spacing, and connector loss must be selected from the completed PCB stack-up.
Treat the 64-NFBGA escape routing as a manufacturing and assembly constraint. Confirm that the selected board rules support the ball pitch and pad definition shown in the manufacturer package drawing, and provide suitable fanout or via-in-pad strategy. The available product listings establish the 8 mm by 8 mm package but do not establish an authoritative ball map, so use the manufacturer pin table for every connection rather than a generic BGA symbol.
Do not select a replacement solely because both parts are described as FPD-Link receivers. Confirm the 3.3 V supply, 24-bit organization, 28/4 receiver configuration, 65 MHz clock capability, differential input behavior, output interface, and exact 64-NFBGA footprint. A footprint match alone does not establish timing or protocol compatibility, and a different lane arrangement can prevent the receiver from operating even when the board can physically accept the component.
Validate the complete link from transmitter output through connector or cable to receiver input using the final stack-up and enclosure. Check differential impedance, pair skew, insertion loss, return loss, clock jitter tolerance, and receiver eye margin. The published 65 MHz operating frequency is a device attribute, not proof that every physical implementation will maintain adequate margin at that rate.
コンプライアンス情報
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was found for the exact DS90CF384SLC ordering code. The manufacturer product page should be checked for current quality and environmental information.
