DSP56321VL240 - 240MHz 24-Bit DSP, 196-MAPBGA | NXP Semiconductors
部品番号: DSP56321VL240 ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $152.46 | $152.46 |
| 10 | $137.21 | $1,372.10 |
| 100 | $122.5 | $12,250.00 |
| 500 | $110.2 | $55,100.00 |
| 1,000 | $99.85 | $99,850.00 |
DSP56321VL240 概要
A Digital Signal Processor (DSP) is a specialized microprocessor optimized for numeric-intensive, real-time computations such as audio/video decoding, modulation/demodulation, encryption, and motor control. Within the broader integrated-circuits hierarchy, a fixed-point DSP sits between a microcontroller (general-purpose control) and a floating-point DSP (high-dynamic-range math): fixed-point DSP -> DSP -> microprocessor -> semiconductor. The 24-bit word width of the DSP56321 is purpose-built for audio CODECs, telephony, and consumer audio where 16-bit dynamic range is insufficient but 32-bit floating-point cost is unnecessary.
Key features include a single-clock-cycle-per-instruction engine (DSP56000 code-compatible), a hardware barrel shifter, 24-bit addressing, and a dedicated Host Interface, SSI (synchronous serial), and SCI (asynchronous serial) peripheral set. The DSP56321 targets networking, security encryption, and home-entertainment applications, with deterministic interrupt latency and dual on-chip memory banks (X/Y) for concurrent operand fetches.
Architecturally, the DSP56321 uses a Harvard-style bus with separate program and data memory spaces, plus an instruction cache that reduces external memory bandwidth pressure. The six-channel DMA unit offloads block transfers (e.g., between serial ports and memory) without CPU intervention, freeing instruction cycles for DSP kernels.
Typical applications include VoIP gateways, audio effects processors, MPEG audio codecs, secure communications (encryption/decryption accelerators), and general-purpose industrial DSP modules. The 196-MAPBGA footprint supports high-density designs where PCB area is constrained.
Design consideration: maintain a clean 3.3 V analog/digital supply layout because the DSP56321 mixes high-speed core logic with TTL I/O - bulk decoupling near every power pin and a low-impedance ground pour are mandatory. Lifetime-buy planning is recommended since this part has reached end-of-life per the NXP product page; verify last-time-buy windows before committing to new designs.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: DSP56321VL240 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSP56321VL240 （同一形状・フットプリント） — 相違点: Package, Core Architecture, RoHS Status, Serial Interfaces, Mounting Type.
クイック比較ツール — 並列比較する代替部品を選択:
DSP56321VF240
✅ ドロップイン✓ 在庫あり
$78.21 / 個
データシートを見る →DSP56311VL150
✅ ドロップイン✓ 在庫あり
$23.4 / 個
データシートを見る →DSP56301VF100
✅ ドロップイン✓ 在庫あり
$16.95 / 個
データシートを見る →DSP56F807VF80E
✅ ドロップイン✓ 在庫あり
$24.6094 / 個
データシートを見る →DSP56321VL240 最大定格＆電気的特性
| Product Type | Fixed-Point Digital Signal Processor (DSP) |
| Core Architecture | DSP56300 family (DSP56000 code-compatible) |
| データバス幅 | 24 bit |
| 最大クロック周波数 | 240 MHz |
| On-Chip RAM | 576 kB |
| Non-Volatile Memory | ROM (576 B, bootstrap) |
| I/O Voltage | 3.30 V |
| Instruction Cache | Yes (24-bit instruction cache) |
| DMA Channels | 6 |
| Barrel Shifter | Yes (hardware) |
| Serial Interfaces | Host Interface, SSI, SCI |
| Addressing Range | 24-bit |
| Input/Output Logic | TTL compatible |
| Process Technology | High-density CMOS |
| パッケージ | 196-MAPBGA (15 x 15 mm) |
| 実装タイプ | Surface Mount |
| Lead-Free / Pb-Free | Yes (PBFREE per Mouser listing) |
| RoHS ステータス | Compliant (per ETEI comparison data) |
DSP56321VL240 196-mapbga (15 x 15 mm) ピン配置ガイド
DSP56321VL240 (196-mapbga (15 x 15 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: DSP56321VL240.
詳細は データシート をご参照ください。
主な用途
DSP56321VL240 の用途: 6 件s: VoIP Gateway and Telephony Systems, Audio Effects Processing and Equalization, MPEG Audio Decoding, Security Encryption and Cryptographic Acceleration, Home Entertainment and A/V Receiver Systems, Industrial Control and Motor Drive DSP.
VoIP Gateway and Telephony Systems
The NXP DSP56321VL240's 240 MHz single-cycle execution and 24-bit data width make it ideal for VoIP gateway line cards, where multiple voice channels must be G.711/G.729/G.723.1 transcoded in real time. With 576 kB on-chip RAM, the device holds several concurrent vocoder states plus echo-canceling buffers, eliminating the latency of external memory fetches. The SSI peripheral streams PCM data directly from a telephony CODEC while the SCI handles signaling/HMI. Its 24-bit dynamic range outperforms 16-bit DSPs in transparent audio quality, and its 6-channel DMA offloads block transfers between serial ports and memory so the DSP core stays dedicated to vocoder kernels.
おすすめ
Audio Effects Processing and Equalization
The DSP56321VL240's 24-bit fixed-point pipeline delivers headroom for professional audio effects processing such as parametric EQ, dynamics, reverb, and crossover filtering. At 240 MHz the core sustains hundreds of biquad stages per channel with negligible group delay - critical for live sound and studio outboard. The hardware barrel shifter accelerates scaling operations common in fixed-point audio math. The SSI peripheral streams I2S/TDM audio directly to AD/DA converters, while the on-chip 576 kB RAM holds convolution reverb impulse responses without external memory. This is a typical application for the DSP56300 family in rack-mount processors and AV receivers.
おすすめ
MPEG Audio Decoding
Consumer audio products decoding MPEG-1 Layer II/III, AAC, or Dolby Digital streams benefit from the DSP56321VL240's deterministic 240 MHz instruction throughput and dedicated memory architecture. The dual X/Y data-memory banks allow the device to fetch two operands per cycle, sustaining the inner loops of Huffman and IMDCT kernels common in MPEG decoders. The 6-channel DMA controller streams compressed bitstream data into memory while the core decodes, with no software-managed buffer underruns. The 24-bit data width preserves precision in fixed-point DCT/FFT stages, yielding higher audible quality than 16-bit MPEG decoders at low bit-rates.
おすすめ
Security Encryption and Cryptographic Acceleration
The DSP56321VL240's 24-bit barrel shifter, fast XOR/rotate operations, and 240 MHz cycle rate accelerate symmetric encryption algorithms such as DES, 3DES, AES, and SHA hash functions in secure communications gateways. The deterministic interrupt response and isolated code/data memory spaces support certifiable crypto implementations where side-channel timing leakage must be bounded. The Host Interface peripheral offloads bulk data movement between the DSP and an external host processor, while the SSI provides a back-channel for secure key injection. This is a typical application for the DSP56300 family in VPN concentrators, SSL accelerators, and DRM enforcement nodes.
おすすめ
Home Entertainment and A/V Receiver Systems
Home theater and A/V receiver designs leverage the DSP56321VL240 to run room-correction algorithms, bass management, and surround-sound decoding (Dolby/DTS post-processing) at full 240 MHz throughput. The 576 kB on-chip RAM holds multi-channel filter coefficients and delay-line buffers for time-alignment of speaker arrays, removing the latency of external memory. SSI ports connect to multi-channel audio DACs at sample rates up to 192 kHz, while the Host Interface links to the receiver's main controller for user-interface control. The 196-MAPBGA footprint fits the dense layouts of slim-line AV receivers where board area is constrained.
おすすめ
Industrial Control and Motor Drive DSP
The DSP56321VL240's deterministic single-cycle execution and hardware math accelerators (barrel shifter, 24-bit multiplier) suit industrial motor-control loops where field-oriented control (FOC) and PWM must update every PWM period with sub-microsecond jitter. The SSI ports can interface to digital resolvers or encoder feedback, while the SCI port provides RS-232/485 diagnostics for industrial networking. The 6-channel DMA samples ADC results and updates PWM compare registers without CPU intervention, freeing cycles for the control law. The wide 3.3 V TTL-compatible I/O simplifies interfacing to industrial gate drivers and isolation barriers.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSP56321VL240 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSP56321VF240 | DSP56311VL150 | DSP56301VF100 | DSP56F807VF80 |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 196-MAPBGA (15x15 mm) | 196-MAPBGA - same | 196-MAPBGA - same | 196-MAPBGA - same | 196-MAPBGA - same |
| Core Clock Frequency | 240 MHz | 240 MHz | 150 MHz (-37.5%) | 100 MHz (-58%) | 80 MHz (-67%) |
| DSP Family / ISA | DSP56300 / 56000 ISA (24-bit fixed point) | DSP56300 / 56000 ISA (same) | DSP56300 / 56000 ISA (same) | DSP56300 / 56000 ISA (same) | DSP56800/E hybrid ISA (different) |
| Serial Interfaces | Host, SSI, SCI | Host, SSI, SCI | Host, SSI, SCI | Host, SSI, SCI | Host, SSI, SCI, CAN |
主な差別化要因
- Highest clock speed in the DSP56321 datasheet family at 240 MHz （vs DSP56311VL150)
- Drop-in alternative with identical core and clock speed in same package （vs DSP56321VF240)
- 24-bit data path vs 16-bit on entry-level controllers （vs Typical 16-bit microcontroller (e.g., MAX series))
設計ノート
The DSP56321VL240 mixes a high-speed internal core with 3.3 V TTL-compatible I/O; place 0.1 uF ceramic decoupling capacitors within 5 mm of every VDD/VSS pin pair, plus a 10 uF bulk tantalum or ceramic near each supply rail entry. Estimated: the 196-MAPBGA has many power pins distributed across the ball array - a continuous ground pour on the top layer under the BGA, stitched with vias to a solid inner ground plane, is mandatory for switching-current return paths. If the core voltage is 1.8 V or 1.2 V (specific to the silicon revision), use a separate low-dropout regulator rather than sharing the 3.3 V rail.
The 196-MAPBGA (15x15 mm) package requires a 4- or 6-layer PCB with microvia or via-in-pad technology for reliable BGA assembly. Per IPC-7351 and standard BGA layout practice, escape routing must use the outermost signal rows on the top layer and inner-row balls must be routed via inner microvia layers. Maintain a continuous reference plane (ground) beneath the BGA to control impedance of the 50-ohm SSI/Host Interface traces and to minimize EMI from the 240 MHz core. Reference: standard BGA fanout guidelines (per IPC-7093).
Because the DSP56321VL240 is in End-of-Life (EOL) status per the NXP product page, do not commit new designs to this part without a secured lifetime-buy allocation. When migrating to a successor within the DSP56300 family (e.g., DSP56311VL150, DSP56321VF240), validate that the peripheral register map, boot mode strapping, and external bus timing remain compatible - even within the same family, suffix changes can denote pinout or memory-map revisions. Plan firmware re-validation time accordingly.
At 240 MHz core clock, the external address/data bus and Host Interface can generate significant edge rates (sub-ns rise/fall) even at 3.3 V. Estimated: route the external bus with controlled impedance (50 ohm single-ended), keep trace lengths matched within 1 cm across byte lanes, and use a series damping resistor (22-33 ohm) near the driver for highly-loaded buses. The SSI traces to audio CODECs should be length-matched within 5 mm to preserve I2S/TDM timing margins.
コンプライアンス情報
RoHS compliance and Pb-free (PBFREE) status confirmed by Mouser and ETEI comparison data; other compliance fields not explicitly stated in the verified web data.
