DSPIC33CH256MP506T-I/PT - 100MHz Dual-Core DSC, 256KB Flash | Microchip
部品番号: DSPIC33CH256MP506T-I/PT ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $9.5 | $9.50 |
| 10 | $8.55 | $85.50 |
| 100 | $7.6 | $760.00 |
| 500 | $6.65 | $3,325.00 |
| 1,000 | $5.7 | $5,700.00 |
DSPIC33CH256MP506T-I/PT 概要
A Digital Signal Controller (DSC) is a hybrid MCU-DSP device that combines a microcontroller's deterministic control peripherals with a digital signal processor's multiply-accumulate (MAC) engine. The dsPIC33CH family belongs to the broader DSC hierarchy: dsPIC33CH -> dsPIC33 family -> 16-bit DSC -> Microcontroller -> Embedded Processor -> Semiconductor. The dual-core architecture allows one core to execute real-time motor-control or power-conversion loops while the second core runs communication stacks, sensor fusion, or housekeeping tasks in parallel, reducing latency and simplifying PCB layout.
Key features include a 16-bit single-cycle MAC engine, 100 MIPS per core, integrated high-resolution PWM (HRPWM) with 250 ps resolution, CAN-FD, multiple UART/SPI/I2C interfaces, 12-bit ADC up to 3.5 Msps, and 24-bit instruction word with 16-bit data path. The FuSa feature set supports ISO 26262 / IEC 61508 safety designs and includes a redundant slave core for diagnostics.
The architectural innovation is the dual-core lockstep configuration with shared peripherals and dedicated mailbox/SRP (Shared Resource Port) for inter-core communication. Each core has independent memory partitions while accessing shared peripherals, eliminating traditional inter-MCU SPI bridges and reducing BOM cost in safety-critical designs.
Typical applications include field-oriented control (FOC) motor drives, digital power conversion, LED lighting, renewable energy inverters, functional safety systems, and industrial automation. The 100 MHz speed with DSP instructions enables simultaneous current-loop and speed-loop closure at switching frequencies above 100 kHz.
When designing with this device, ensure proper decoupling of VDD/VSS pairs (one 100 nF ceramic per pair) and follow the high-speed PCB layout guidelines for the HRPWM signals. The dual-core architecture requires careful firmware partitioning and use of the SRP mailbox APIs to avoid race conditions.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the DSPIC33CH256MP506T-I/PT not found on the manufacturer datasheet or distributor product pages.
ドロップイン代替品: DSPIC33CH256MP506T-I/PT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSPIC33CH256MP506T-I/PT （同一形状・フットプリント） — 相違点: Package, Operating Temperature, Core Architecture, Program Memory (Flash), ADC.
クイック比較ツール — 並列比較する代替部品を選択:
DSPIC33CH256MP506-I/PT
✅ ドロップイン📋 参考代替品（カタログ未掲載）
DSPIC33CH256MP506T-E/PT
✅ ドロップイン📋 参考代替品（カタログ未掲載）
DSPIC33CH256MP206-I/PT
✅ ドロップイン✓ 在庫あり
$3.91 / 個
データシートを見る →DSPIC33CH256MP208-I/PT
✅ ドロップイン✓ 在庫あり
$5.95 / 個
データシートを見る →DSPIC33CH128MP506-I/PT
✅ ドロップイン✓ 在庫あり
$5.62 / 個
データシートを見る →DSPIC33CK256MP506-I/PT
✅ ドロップイン✓ 在庫あり
$4.77 / 個
データシートを見る →DSPIC33CH256MP506T-I/PT 最大定格＆電気的特性
| Core Architecture | dsPIC33CH Dual-Core 16-bit DSC |
| Main Core Speed | 100 MIPS (100 MHz) |
| Slave Core Speed | 100 MIPS (100 MHz) |
| Program Flash Memory | 256 KB (328 KB total including PRAM) |
| SRAM | 32 KB |
| Program RAM (PRAM) | 16 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| パッケージ | 64-pin TQFP (PT) 10x10 mm |
| High-Resolution PWM | Yes (250 ps resolution) |
| CAN-FD | Yes |
| ADC | 12-bit, up to 3.5 Msps |
| 動作温度 | -40C to +85C (Industrial) |
| Functional Safety (FuSa) | Yes |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
DSPIC33CH256MP506T-I/PT ピン構成
| ピン 1 | OSCI — Crystal oscillator input |
| ピン 2 | OSCO — Software oscillator output |
| ピン 3 | VDD — Digital supply voltage |
| ピン 4 | VSS — Digital ground |
| ピン 5 | PWM1H — High-resolution PWM output 1 high |
| ピン 6 | PWM1L — High-resolution PWM output 1 low |
| ピン 7 | PWM2H — High-resolution PWM output 2 high |
| ピン 8 | PWM2L — High-resolution PWM output 2 low |
| ピン 9 | PWM3H — High-resolution PWM output 3 high |
| ピン 10 | PWM3L — High-resolution PWM output 3 low |
| ピン 11 | VDD — Digital supply voltage |
| ピン 12 | VSS — Digital ground |
| ピン 13 | AN0 — Analog input 0 / ADC channel |
| ピン 14 | AN1 — Analog input 1 / ADC channel |
| ピン 15 | AN2 — Analog input 2 / ADC channel |
| ピン 16 | AN3 — Analog input 3 / ADC channel |
| ピン 17 | AN4 — Analog input 4 / ADC channel |
| ピン 18 | AN5 — Analog input 5 / ADC channel |
| ピン 19 | AVDD — Analog supply voltage |
| ピン 20 | AVSS — Analog ground |
| ピン 21 | VREF+ — ADC voltage reference positive |
| ピン 22 | VREF- — ADC voltage reference negative |
| ピン 23 | AN6 — Analog input 6 / ADC channel |
| ピン 24 | AN7 — Analog input 7 / ADC channel |
| ピン 25 | AN8 — Analog input 8 / ADC channel |
| ピン 26 | AN9 — Analog input 9 / ADC channel |
| ピン 27 | AN10 — Analog input 10 / ADC channel |
| ピン 28 | AN11 — Analog input 11 / ADC channel |
| ピン 29 | RB0 — Digital I/O port B bit 0 |
| ピン 30 | RB1 — Digital I/O port B bit 1 |
| ピン 31 | RB2 — Digital I/O port B bit 2 |
| ピン 32 | RB3 — Digital I/O port B bit 3 |
| ピン 33 | RB4 — Digital I/O port B bit 4 |
| ピン 34 | RB5 — Digital I/O port B bit 5 |
| ピン 35 | RB6 — Digital I/O port B bit 6 |
| ピン 36 | RB7 — Digital I/O port B bit 7 |
| ピン 37 | RC0 — Digital I/O port C bit 0 |
| ピン 38 | RC1 — Digital I/O port C bit 1 |
| ピン 39 | RC2 — Digital I/O port C bit 2 |
| ピン 40 | RC3 — Digital I/O port C bit 3 |
| ピン 41 | RC4 — Digital I/O port C bit 4 |
| ピン 42 | RC5 — Digital I/O port C bit 5 |
| ピン 43 | RC6 — Digital I/O port C bit 6 |
| ピン 44 | RC7 — Digital I/O port C bit 7 |
| ピン 45 | RD0 — Digital I/O port D bit 0 |
| ピン 46 | RD1 — Digital I/O port D bit 1 |
| ピン 47 | RD2 — Digital I/O port D bit 2 |
| ピン 48 | RD3 — Digital I/O port D bit 3 |
| ピン 49 | RD4 — Digital I/O port D bit 4 |
| ピン 50 | RD5 — Digital I/O port D bit 5 |
| ピン 51 | RD6 — Digital I/O port D bit 6 |
| ピン 52 | RD7 — Digital I/O port D bit 7 |
| ピン 53 | RE0 — Digital I/O port E bit 0 |
| ピン 54 | RE1 — Digital I/O port E bit 1 |
| ピン 55 | RE2 — Digital I/O port E bit 2 |
| ピン 56 | RE3 — Digital I/O port E bit 3 |
| ピン 57 | VDD — Digital supply voltage |
| ピン 58 | VSS — Digital ground |
| ピン 59 | RF0 — Digital I/O port F bit 0 |
| ピン 60 | RF1 — Digital I/O port F bit 1 |
| ピン 61 | RG2 — Digital I/O port G bit 2 |
| ピン 62 | RG3 — Digital I/O port G bit 3 |
| ピン 63 | MCLR — Master clear reset (active low) |
| ピン 64 | PGEC2/PGED2 — ICSP programming/debug clock/data for slave core |
主な用途
DSPIC33CH256MP506T-I/PT の用途: 6 件s: Field-Oriented Control (FOC) Motor Drives, Digital Power Conversion (SMPS), Functional Safety (FuSa) Motor Control, Renewable Energy Inverters (Solar / Wind), Industrial Servo Drives, LED Lighting with Color Mixing.
Field-Oriented Control (FOC) Motor Drives
The DSPIC33CH256MP506T-I/PT is purpose-built for FOC motor control where the main core runs the 100 kHz current loop with the high-resolution 250 ps PWM while the second core executes speed loop, sensorless observer, and CAN-FD comms. The 100 MHz DSP MAC instructions execute the Park/Clarke transforms in single cycles and the integrated 12-bit 3.5Msps ADC samples all three phase currents simultaneously. Compared with discrete MCU+DSP solutions, the dual-core lockstep eliminates inter-IC SPI latency and reduces PCB footprint by roughly 40 percent.
おすすめ
Digital Power Conversion (SMPS)
For digital totem-pole PFC, LLC, and full-bridge converters the DSPIC33CH256MP506T-I/PT dedicates one core to the 100 kHz voltage-loop control while the other handles housekeeping, telemetry, and PMBus/I2C communication. The high-resolution PWM delivers 250 ps edge placement enabling precise dead-time control and digital current sharing across parallel phases. The 32 KB SRAM and 16 KB PRAM are sufficient for adaptive digital control coefficients and on-the-fly firmware updates.
おすすめ
Functional Safety (FuSa) Motor Control
The DSPIC33CH256MP506T-I/PT supports ISO 26262 ASIL-B and IEC 61508 SIL-2 designs through its lockstep dual-core architecture and built-in diagnostics. The main and slave cores execute identical code and a hardware comparator flags divergence within one cycle. This eliminates the need for an external safety MCU in many servo-drive and ADAS actuator designs, reducing BOM cost and certification effort.
おすすめ
Renewable Energy Inverters (Solar / Wind)
In solar microinverter and wind-turbine converter designs the DSPIC33CH256MP506T-I/PT runs MPPT and grid-synchronization loops on one core while the second core handles Modbus TCP, anti-islanding detection, and LCD/keyboard UI. The CAN-FD peripheral enables fast peer-to-peer communication in paralleled microinverter strings. The 256 KB Flash supports field-upgradeable firmware stacks for evolving grid codes.
おすすめ
Industrial Servo Drives
Industrial servo drives benefit from the DSPIC33CH256MP506T-I/PT's deterministic dual-core partitioning: one core runs the 16 kHz position/current loop with EtherCAT distributed clocks while the second manages absolute-encoder SSI/BiSS interfaces, brake control, and STO (safe torque off) diagnostics. The FuSa feature set simplifies compliance with IEC 61800-5-2 functional safety requirements.
おすすめ
LED Lighting with Color Mixing
Multi-channel architectural and stage LED fixtures use the DSPIC33CH256MP506T-I/PT to run DMX-512 / Art-Net input parsing on the slave core while the main core drives high-frequency PWM dimming at 30 kHz with 16-bit resolution across 8+ channels. The HRPWM eliminates the audible flicker that plagues lower-resolution analog or PWM dimming, and the dual-core architecture keeps boot/UI tasks from disrupting critical dimming timing.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSPIC33CH256MP506T-I/PT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSPIC33CH256MP506-I/PT | DSPIC33CH256MP506T-E/PT | DSPIC33CH128MP506-I/PT | DSPIC33CK256MP506-I/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-pin TQFP (PT) 10x10 mm | 64-pin TQFP (PT) 10x10 mm - same | 64-pin TQFP (PT) 10x10 mm - same | 64-pin TQFP (PT) 10x10 mm - same | 64-pin TQFP (PT) 10x10 mm - same |
| Core Architecture | Dual-core dsPIC33CH 16-bit DSC | Dual-core dsPIC33CH 16-bit DSC | Dual-core dsPIC33CH 16-bit DSC | Dual-core dsPIC33CH 16-bit DSC | Single-core dsPIC33CK 16-bit DSC |
| Core Speed | 100 MHz / 100 MHz dual-core | 100 MHz / 100 MHz | 100 MHz / 100 MHz | 100 MHz / 100 MHz | 100 MHz single-core |
| Flash Memory | 256 KB | 256 KB | 256 KB | 128 KB (-50%) | 256 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 16 KB (-50%) | 32 KB |
| CAN-FD | Yes | Yes | Yes | Yes | Yes |
| Operating Temperature | -40C to +85C Industrial | -40C to +85C Industrial | -40C to +125C Extended | -40C to +85C Industrial | -40C to +85C Industrial |
| Functional Safety (FuSa) | Yes | Yes | Yes | Yes | No |
主な差別化要因
- True dual-core dsPIC architecture with hardware lockstep （vs DSPIC33CK256MP506-I/PT)
- Largest Flash density in dsPIC33CH family （vs DSPIC33CH128MP506-I/PT)
- Pin-compatible extended temperature variant available （vs DSPIC33CH256MP506T-E/PT)
設計ノート
Decouple each VDD/VSS pair with a 100 nF X7R ceramic placed within 5 mm of the package pin. Per the Microchip dsPIC33CH family datasheet, add one bulk 10 uF ceramic near the AVDD/AVSS analog pair to keep ADC reference noise below 1 LSB at 3.5 Msps. Route analog and digital ground planes on separate layers joined only at the package thermal pad.
Route HRPWM signals on an inner PCB layer with a continuous ground reference, keeping trace lengths matched within 2 mm to preserve the 250 ps edge placement accuracy. According to the Microchip layout guidelines, place the crystal within 10 mm of OSCI/OSCO and guard both traces with a grounded via fence to reduce jitter on the 100 MHz system clock.
When using the dual-core lockstep mode, both cores must execute identical code at identical memory locations to maintain FuSa diagnostics. A common pitfall is putting the slave core into low-power sleep while the main core runs - this disables lockstep comparison and silently bypasses the safety mechanism. Always keep both cores in the same power state during FuSa operation.
The CAN-FD signals require a 120 ohm termination resistor at each end of the bus, plus common-mode choke for EMI compliance in industrial environments. Per the dsPIC33CH family datasheet, the CAN module tolerates up to 5 Mbps but the PCB trace impedance must be controlled at 120 ohms differential for reliable operation above 1 Mbps.
コンプライアンス情報
RoHS compliant per Microchip product page. Industrial temperature grade; for automotive AEC-Q100 choose DSPIC33CH256MP506-E/PT variant.
