DSPIC33EP128GS705-E/PT - 70 MIPS 16-bit DSC 128KB | Microchip
部品番号: DSPIC33EP128GS705-E/PT ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $6.5 | $6.50 |
| 10 | $5.85 | $58.50 |
| 100 | $5.2 | $520.00 |
| 500 | $4.68 | $2,340.00 |
| 1,000 | $4.2 | $4,200.00 |
DSPIC33EP128GS705-E/PT 概要
A digital signal controller combines the computational core of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, a DSC sits above a general-purpose MCU: it executes DSP-class multiply-accumulate instructions while integrating high-speed PWM and ADC peripherals purpose-built for closed-loop digital power conversion.
Key features include 70 MIPS core throughput, dual-partition Flash enabling live firmware updates for functional-safety designs, and the SMPS peripheral architecture targeted at switched-mode power supplies. The -E/PT suffix denotes extended temperature operation and the 48-pin TQFP tray package option.
The dsPIC33EP128GS705 family supports AEC-Q100 automotive qualification and Functional Safety (FuSa) design flows, per Microchip product data. Dual-partition Flash allows one partition to execute while the other is erased and programmed, supporting safe field upgrades in automotive and industrial power systems.
Typical applications include interleaved power factor correction (PFC), LLC and half-bridge DC-DC converters, digital UPS systems, solar micro-inverters, and automotive LED lighting or on-board charger control loops.
Design consideration: this is a 3.3V-only device; level-shift or select logic-compatible peripherals when interfacing with 5V automotive buses, and budget Flash carefully since 128 KB is fixed across the GS705 variant.
This page synthesizes drop-in family alternatives, AEO-optimized FAQs, and practical design notes not found in the manufacturer datasheet. Pricing references are as of 2026-09-23.
ドロップイン代替品: DSPIC33EP128GS705-E/PT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSPIC33EP128GS705-E/PT （同一形状・フットプリント） — 相違点: Core Architecture, Package, Temperature Grade.
クイック比較ツール — 並列比較する代替部品を選択:
DSPIC33EP128GS705-I/PT
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$4.48 / 個
データシートを見る →DSPIC33EP64GS705-I/PT
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP128GS705-E/PT 最大定格＆電気的特性
| Core Architecture | 16-bit dsPIC DSC |
| Maximum CPU Speed | 70 MIPS |
| Program Memory (Flash) | 128 KB (43K x 24) |
| Flash Feature | Dual Partition Flash |
| SRAM | 8 KB |
| 電源電圧 | 3.3 V |
| パッケージ | 48-TQFP (7x7 mm) |
| 実装タイプ | Surface Mount |
| Temperature Grade | Extended (E), -40C to +125C |
| Automotive Qualification | AEC-Q100 Qualified |
| Functional Safety | FuSa supported |
| Application Segment | Automotive / Digital Power (SMPS) |
| Packaging | Tray |
| ライフサイクル状態 | In Production |
DSPIC33EP128GS705-E/PT 48-tqfp (7x7 mm) ピン配置ガイド
DSPIC33EP128GS705-E/PT (48-tqfp (7x7 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: DSPIC33EP128GS705-E/PT.
詳細は データシート をご参照ください。
主な用途
DSPIC33EP128GS705-E/PT の用途: 6 件s: Interleaved Power Factor Correction (PFC), Automotive On-Board Chargers and DC-DC, Digital UPS and Inverter Systems, Solar Micro-Inverters, Industrial Digital Power Supplies, Motor Control for Pumps and HVAC Blowers.
Interleaved Power Factor Correction (PFC)
The DSPIC33EP128GS705-E/PT fits interleaved PFC applications because its 70 MIPS DSP core can close current-loop bandwidths that a general-purpose MCU cannot, and Microchip ships a dedicated Interleaved PFC reference design for this dsPIC33EP GS family rated to 350 W with universal AC input. The high-speed PWM peripherals generate phase-shifted or interleaved gate signals for multiple boost legs, while the on-chip analog front end samples inductor current and bus voltage for average-current-mode control. Dual-partition Flash lets OEMs safely update control firmware in the field, an advantage in long-lifetime power infrastructure. Place the controller near the gate drivers with short PWM traces and sense lines routed differentially to preserve signal integrity in the high dV/dt environment of a PFC stage.
おすすめ
Automotive On-Board Chargers and DC-DC
The DSPIC33EP128GS705-E/PT is well suited to automotive on-board chargers, auxiliary DC-DC converters, and LED headlight drivers because it is AEC-Q100 qualified and the -E/PT grade is rated from -40C to +125C, matching the ambient conditions of automotive electronics bays. The 70 MIPS core executes phase-shifted full-bridge or LLC control loops deterministically, while the FuSa-supported development flow and dual-partition Flash enable safe in-field firmware updates required by automotive ECU lifecycle management. Operating from a 3.3V supply simplifies interfacing with automotive-grade transceivers via level shifting. Designers should derate junction temperature against the 125C ambient ceiling and confirm the exact ISO 26262-relevant collateral from Microchip's functional-safety program during system qualification.
おすすめ
Digital UPS and Inverter Systems
Uninterruptible power supplies benefit from the DSPIC33EP128GS705-E/PT because one 70 MIPS controller can supervise battery charging, inverter sinusoidal PWM generation, and transfer-logic sequencing simultaneously. The 128 KB (43K x 24) Flash accommodates comprehensive control stacks including dead-time compensation and harmonic injection, while 8 KB of RAM buffers control states and fault logs. The GS-family SMPS-oriented peripherals generate complementary high-speed PWM outputs with programmable dead time for half-bridge and full-bridge inverter stages. Extended -40C to +125C operation allows mounting inside sealed outdoor UPS enclosures. A practical layout consideration: separate the analog ground of the sensing network from the PWM ground return, star-grounding at the controller, to keep ADC readings free of switching noise during inverter commutation events.
おすすめ
Solar Micro-Inverters
Panel-level solar micro-inverters demand precise MPPT and grid-synchronization control in a compact, thermally stressed enclosure - exactly the profile of the DSPIC33EP128GS705-E/PT. The 70 MIPS throughput runs MPPT sampling fast enough to track irradiance transients, while the 48-TQFP (7x7 mm) footprint keeps the controller area small on dense power boards. Extended temperature rating tolerates rooftop ambient swings, and AEC-Q100 qualification provides a proven reliability baseline. The 3.3V supply and on-chip analog reduce external component count on cost-sensitive micro-inverter BOMs. Dual-partition Flash allows firmware updates with grid-code changes after installation. Engineers should budget Flash carefully: MPPT, PLL grid sync, protection, and communication firmware must fit within the 128 KB program space, leaving limited margin for future features.
おすすめ
Industrial Digital Power Supplies
Server, telecom, and industrial power supplies use the DSPIC33EP128GS705-E/PT to close voltage and current loops on LLC, buck, and phase-shifted full-bridge converters. The 70 MIPS core with DSP multiply-accumulate instructions executes PID plus nonlinear compensation at switching frequencies well beyond what 8-bit MCUs handle, and the SMPS-targeted peripheral set produces high-resolution PWM with hardware dead-time control. The 8 KB RAM supports adaptive compensation state storage across load transients. In-production lifecycle status and multi-source distributor availability (9 distributors per Octopart as of 2026-09-23) de-risk long-term sourcing for industrial programs with 5-10 year lifetimes. For new designs needing higher ADC throughput, consider the pin-related dsPIC33CK family, accepting that it requires PCB rework rather than drop-in replacement.
おすすめ
Motor Control for Pumps and HVAC Blowers
The DSPIC33EP128GS705-E/PT drives brushless DC and permanent-magnet synchronous motors in pumps, fans, and HVAC blowers where its 70 MIPS core runs field-oriented control with sensorless observers in real time. The extended -40C to +125C temperature range covers outdoor and rooftop unit environments, and AEC-Q100 qualification makes it acceptable for automotive thermal-management blowers as well. The high-speed PWM module generates the six-channel inverter gate pattern with hardware dead time, while ADC sampling synchronized to PWM centers yields low-noise phase-current measurements essential for FOC smoothness. Dual-partition Flash allows parameter-set and firmware updates in deployed fleets. Layout guidance: keep phase-current shunt traces Kelvin-routed to the controller's analog inputs and synchronize ADC triggers to the PWM counter for repeatable, ripple-free current sampling.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSPIC33EP128GS705-E/PT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSPIC33EP128GS705-I/PT | DSPIC33EP64GS705-I/PT |
|---|---|---|---|
| Package | 48-TQFP (7x7 mm) | 48-TQFP (7x7 mm) - same | 48-TQFP (7x7 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 70 MIPS | 70 MIPS | 70 MIPS |
| Flash Memory | 128 KB (43K x 24) | 128 KB (43K x 24) | 64 KB (22K x 24) |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V |
| Temperature Range | -40C to +125C (E, extended) | -40C to +85C (I, industrial) | -40C to +85C (I, industrial) |
主な差別化要因
- Extended temperature grade for automotive/harsh environments （vs DSPIC33EP128GS705-I/PT)
- Double the program memory on the same footprint （vs DSPIC33EP64GS705-I/PT)
- Dual partition Flash with AEC-Q100 and FuSa support （vs DSPIC33EP128GS705-I/PT)
設計ノート
The DSPIC33EP128GS705-E/PT operates from a single 3.3V supply with no 5V tolerance on general I/O. In automotive and industrial power electronics, gate-driver logic levels and communication transceivers (CAN, RS-485) often run at 5V - use proper level shifting or select 3.3V-compatible drivers. Decouple each VDD pin pair with 100 nF ceramics placed within 2 mm of the pins, plus a 4.7-10 uF bulk capacitor. Estimated: a 70 MIPS dsPIC33EP typically draws tens of milliamps, so supply design is straightforward, but ensure the regulator handles inrush during Flash programming.
On the 48-TQFP (7x7 mm) footprint, route the high-speed PWM outputs to gate drivers on short, matched traces and keep them away from analog sense lines. Use a solid ground plane and star-connect the analog ground at the controller. Sense lines for shunt resistors should be Kelvin-routed differentially. Place the crystal (if used for the primary oscillator) close to the OSC pins with short guard traces. Per Microchip's digital power reference design practice for the GS family, synchronize ADC sampling to the PWM counter to reject switching ripple in current loops.
Three common pitfalls: (1) Assuming pin-compatibility outside the GS705 family - DSPIC33CK parts are newer and software-adjacent but NOT drop-in on this 48-TQFP footprint. (2) Mixing the -E/PT (125C) and -I/PT (85C) grades in the same BOM - an industrial-grade part in a 105C ambient will exceed its rating. (3) Exceeding 128 KB Flash in firmware - dual-partition operation effectively halves usable contiguous code space per partition when live updates are used, so budget accordingly in safety architectures.
コンプライアンス情報
AEC-Q100 automotive qualification and Functional Safety (FuSa) support confirmed from Microchip/distributor data. RoHS/REACH/lead-free status not present in verified data - confirm on Microchip product page environmental section.