DSPIC33EP512GM706-I/MR - 70 MIPS 512KB Flash DSC | Microchip
部品番号: DSPIC33EP512GM706-I/MR ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $7.42 | $7.42 |
| 10 | $6.68 | $66.80 |
| 100 | $5.9 | $590.00 |
| 500 | $5.35 | $2,675.00 |
| 1,000 | $4.85 | $4,850.00 |
DSPIC33EP512GM706-I/MR 概要
A digital signal controller combines the computational strengths of a microcontroller (MCU) with the math-acceleration of a digital signal processor (DSP). Within the power-management hierarchy of embedded systems, a DSC sits between a general-purpose MCU and a dedicated DSP, offering C-programmable control flow, integrated flash, and single-cycle MAC and DSP instructions. Microchip's dsPIC33E family targets real-time embedded control where deterministic loop timing and rich peripherals matter more than raw throughput.
Key features include the 70 MIPS dsPIC DSC core with integrated DSP engine, 12-channel motor control PWM (MCPWM) with complementary outputs and dead-time control, 8 input capture and 8 output compare channels, 2 quadrature encoder interface (QEI) modules, on-chip operational amplifiers and comparators, and a CAN bus interface. These peripherals make the device especially strong for field-oriented motor control and digital power conversion.
Technically, the device operates from a 3V to 3.6V supply with clock operation up to 60 MHz (70 MIPS effective core speed via internal PLL). The rich analog front end (op amps, comparators, high-speed 10/12-bit ADC) reduces external component count in current-sense and protection circuits.
Typical applications include BLDC/PMSM/ACIM precision motor control, digital power supplies and solar inverters, automotive-adjacent industrial drives, and sensor signal conditioning. The 2 QEI modules directly interface with rotary encoders in servo drives.
Design consideration: the VQFN-64 (9x9) package requires careful PCB thermal grounding; connect the exposed pad to a solid ground plane. Verify RAM allocation carefully, as 16KB of RAM constrains large buffering applications.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: DSPIC33EP512GM706-I/MR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSPIC33EP512GM706-I/MR （同一形状・フットプリント） — 相違点: Package, Program Memory (Flash), Operating Temperature, RAM, Core.
クイック比較ツール — 並列比較する代替部品を選択:
DSPIC33EP512GM706-I/ML
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP512GM706-E/ML
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP512GM310T-I/PF
✅ ドロップイン✓ 在庫あり
$15.95 / 個
データシートを見る →DSPIC33EP512GM706-I/MR 最大定格＆電気的特性
| Core Architecture | 16-bit dsPIC33E DSC with DSP engine |
| Core Speed | 70 MIPS |
| Clock Speed | 60 MHz |
| Program Memory (Flash) | 512KB (170K x 24) |
| RAM | 16KB |
| 電源電圧 | 3 V to 3.6 V |
| パッケージ | 64-VQFN (9x9) |
| ピン数 | 64 |
| Motor Control PWM Channels | 12 MCP PWM |
| Input Capture / Output Compare | 8 / 8 |
| Quadrature Encoder Interfaces | 2 QEI |
| CAN Interface | Yes (per datasheet: CAN) |
| On-chip Op Amps / Comparators | 4 op amp/comparators plus 1 dedicated comparator (per Microchip PIM info sheet) |
| データバス幅 | 16-bit |
| 動作温度 | -40C to +85C (I grade) |
| 実装タイプ | Surface Mount |
DSPIC33EP512GM706-I/MR 64-vqfn (9x9) ピン配置ガイド
DSPIC33EP512GM706-I/MR (64-vqfn (9x9) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: DSPIC33EP512GM706-I/MR.
詳細は データシート をご参照ください。
主な用途
DSPIC33EP512GM706-I/MR の用途: 6 件s: Precision BLDC/PMSM Motor Control, Digital Power Conversion, Industrial Automation and Drives, Automotive-Adjacent Aux systems, Sensor Signal Conditioning and Data Acquisition, Embedded Control for Appliances.
Precision BLDC/PMSM Motor Control
The DSPIC33EP512GM706-I/MR fits single-motor precision drives because it pairs a 70 MIPS 16-bit core with 12 motor-control PWM channels supporting complementary outputs, dead-time insertion, and center-aligned modes for space-vector modulation. Two quadrature encoder interfaces read position feedback directly, while on-chip op amps condition shunt-resistor current signals and comparators provide hardware cycle-by-cycle overcurrent protection without CPU intervention. In a field-oriented control (FOC) loop running at 10-20 kHz, the DSP engine executes single-cycle MAC instructions, leaving ample headroom for speed controllers and communications. Place the part between gate drivers and position sensors with the internal op amps configured as current amplifiers; Microchip's Internal OpAmp Motor Control PIM demonstrates this exact topology, reducing external analog component count and BOM cost in servo, e-bike, and industrial pump drives.
おすすめ
Digital Power Conversion
In digitally controlled power supplies, PFC stages, and solar micro-inverters, the DSPIC33EP512GM706-I/MR provides the deterministic high-frequency control loop required for peak-current and average-current mode control. The 70 MIPS core with DSP instructions executes proportional-integral compensators at 100-500 kHz PWM update rates using the 12-channel MCPWM module, while the high-speed ADC (triggered synchronously from the PWM) samples voltage and current mid-cycle to avoid switching noise. On-chip comparators implement fast cycle-by-cycle current limiting independent of software latency, a critical fault-protection feature in power stages. Operating from a 3V-3.6V rail, it interfaces cleanly with gate-driver ICs via PWM outputs. The 512KB Flash accommodates power-metering code, communication stacks (CAN, UART), and firmware-update bootloaders within a single chip, eliminating an external supervisor in compact AC-DC and DC-DC designs.
おすすめ
Industrial Automation and Drives
Factory automation nodes benefit from the DSPIC33EP512GM706-I/MR's combination of real-time control peripherals and robust communications. The CAN interface integrates directly into industrial fieldbus networks, while 8 input-capture channels timestamp sensor events and 8 output-compare channels generate precise timing outputs for actuators, valves, and stepper sequencing. The 2 QEI modules track two independent encoder axes simultaneously, enabling dual-axis positioning tables or gantry coordination from one 64-pin device. Industrial ambient temperatures (-40C to +85C, I grade) cover cabinet and floor-mounted equipment. With 512KB Flash, protocol translation logic (Modbus-to-CAN gateways) and motion profiles reside entirely on chip. Mount the VQFN on a 4-layer PCB with solid ground plane; the 9x9 mm footprint suits compact I/O modules where a 100-pin TQFP would be oversized and more costly.
おすすめ
Automotive-Adjacent Aux systems
For non-safety automotive auxiliary systems - DC-DC converters, pump/fan controllers, lighting ballasts, and actuator drivers - the DSPIC33EP512GM706-I/MR supplies CAN networking and motor control in one device. The CAN module connects to vehicle networks, the 12-channel MCPWM drives motor phases with hardware dead time, and on-chip comparators implement fast fault shutdown on overcurrent events, meeting the reaction-time demands of power electronics. The -40C to +85C industrial temperature range suits under-cabin and engine-bay-adjacent enclosures; for true under-hood requirements, verify the extended-temperature /E grade variants in the same package. The 3V-3.6V supply matches standard automotive-regulated 3.3V rails derived from 12V or 24V battery inputs via load-dump-rated regulators. The 512KB Flash supports firmware-in-field update bootloaders over CAN, simplifying fleet maintenance.
おすすめ
Sensor Signal Conditioning and Data Acquisition
The DSPIC33EP512GM706-I/MR serves as a smart-sensor hub where analog front-end integration reduces BOM size. Its on-chip operational amplifiers amplify millivolt-level signals from thermocouples, pressure bridges, and current shunts before the internal high-speed ADC digitizes them, all without external amplifier ICs. The DSP engine applies digital filtering (IIR/FIR) with single-cycle MAC efficiency, and the 512KB Flash stores calibration tables, compensation curves, and communication firmware. Eight input-capture channels timestamp pulse outputs from flow meters and encoders with microsecond resolution. The 3V-3.6V operation keeps analog power low, aiding noise performance in precision front ends. In condition-monitoring and portable instrumentation, the 64-VQFN (9x9) package provides substantial I/O in a small footprint, and CAN/UART/SPI links stream processed data to host controllers or cloud gateways without an additional protocol processor.
おすすめ
Embedded Control for Appliances
Appliance and HVAC applications - compressor drives, blower fans, and pump control - leverage the DSPIC33EP512GM706-I/MR's single-chip integration of motor PWM, sensor inputs, and communications. The 12 MCPWM channels drive three-phase compressor motors with sensorless FOC or trapezoidal control, while 8 input-capture channels measure hall/encoder feedback and 8 output-compare channels coordinate heater, valve, and relay timing. On-chip op amps reduce the external analog count, which matters in high-volume consumer appliances where every saved component scales across millions of units. The 3V-3.6V supply and -40C to +85C range cover typical appliance environments. The 64-VQFN (9x9) compact footprint fits crowded main-control PCBs, and the 512KB Flash supports energy-metering, connectivity modules, and safety-interlock firmware coexisting in one code image.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSPIC33EP512GM706-I/MR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSPIC33EP512GM706-I/ML | DSPIC33EP512GM706-E/ML | DSPIC33EP512GM310T-I/PF |
|---|---|---|---|---|
| Package | 64-VQFN (9x9) | QFN-64 - same footprint family | QFN-64 - same footprint family | 64-pin QFN family - verify land pattern |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 512KB (170K x 24) | 512KB | 512KB | 512KB |
主な差別化要因
- Compact 64-VQFN (9x9) with full motor-control peripheral set （vs DSPIC33EP512GM710 (100-pin family member))
- Extended-temperature sibling in the same footprint （vs DSPIC33EP512GM706-E/ML)
- Proprietary pinout blocks cross-brand drop-in swaps （vs TI TMS320F2806x series)
設計ノート
The 64-VQFN (9x9) package has a 0.5 mm pitch, which requires careful PCB footprint design. Use a solder-mask-defined land pattern per Microchip's package outline drawing, with pad sizes 5-10% wider than nominal to improve self-alignment during reflow. Connect the exposed thermal pad to a solid ground plane using a 3x3 or 4x4 via array under the part - this is critical for both thermal dissipation and low-inductance grounding of the many VDD/VSS pairs. Microchip's reference designs for this die (e.g., the Internal OpAmp Motor Control PIM) show recommended decoupling networks.
Operate from a clean 3.3V rail within the 3V-3.6V range. Provide a 0.1uF ceramic decoupling capacitor at every VDD pin pair, placed within 2 mm of the pin, plus one 4.7-10uF bulk capacitor near the device. Because the MCPWM outputs switch several amps of gate-drive transient current through gate drivers, keep the VDD/VSS loops small and separate the analog supply domain (AVDD) with an RC or ferrite filter if the ADC and internal op amps are used for microvolt-level current-sense signals. Estimated: gate-driver switching on 12 PWM channels can inject several hundred mV of high-frequency ripple into a poorly decoupled rail, causing ADC misreads.
RAM is only 16KB - do not assume the larger 48KB-class figures quoted by some distributor pages; size control-loop buffers, communication stacks, and DMA buffers early in firmware development. Also, the -I/MR is industrial grade (-40C to +85C); do not substitute it into under-hood automotive positions without verifying the extended-temperature /E grade. Finally, avoid 5V signals on digital inputs: the absolute maximum on digital pins is tied to VDD (3.6V), so level-shift any 5V legacy logic.
コンプライアンス情報
Compliance data was not present in the verified web data. The -I/MR suffix is Microchip's standard industrial-grade, RoHS-typical commercial offering, but RoHS/REACH status must be confirmed on the official Microchip product page before export. AEC-Q100 qualification is not indicated for this MPN.
