DSPIC33EP64MC203T-I/TL - 16-bit DSC, 64KB Flash, Motor Control | Microchip
部品番号: DSPIC33EP64MC203T-I/TL ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $3.95 | $3.95 |
| 10 | $3.55 | $35.50 |
| 100 | $3.16 | $316.00 |
| 500 | $2.84 | $1,420.00 |
| 1,000 | $2.53 | $2,530.00 |
DSPIC33EP64MC203T-I/TL 概要
A digital signal controller combines the compute architecture of a microcontroller with the mathematical throughput of a DSP. In the semiconductor hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs, making it the natural choice for closed-loop control systems where fast multiply-accumulate operations and deterministic interrupts coexist with real-time peripheral control. The dsPIC33EP family is Microchip's flagship 16-bit DSC platform for embedded precision control.
Key features of this motor-control variant include dedicated motor control PWM (MCPWM) modules with complementary outputs and dead-time insertion, a quadrature encoder interface (QEI) for positional feedback, three integrated operational amplifiers and four analog comparators for current-sense signal chains, a Peripheral Trigger Generator (PTG), and a rich analog block including a high-speed 12-bit ADC and 1 Msps sampling capability. The -I temperature grade covers -40C to +85C; the -E variant extends to +125C with AEC-Q100 qualification.
Architecturally, the dsPIC33EP core provides DSP-style single-cycle MAC, hardware divide, and two address generation units, keeping control-loop latencies predictable. The C compiler (XC16) and MPLAB X IDE ecosystem support free development, while Code Configurator generates peripheral initialization code.
Typical applications include brushless DC (BLDC), permanent magnet synchronous motor (PMSM) and stepper motor drives, digital power supplies (PFC, LLC), power inverters, and industrial automation nodes requiring encoder feedback.
Design tip: the exposed pad of the 36-VTLA package must be soldered to a grounded copper pour for thermal relief and improved signal integrity; ensure 3.3V supply decoupling with at least 0.1uF per pin pair.
This page synthesizes verified distributor data, drop-in alternatives, pricing context, and practical design notes not consolidated in the manufacturer datasheet.
ドロップイン代替品: DSPIC33EP64MC203T-I/TL — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSPIC33EP64MC203T-I/TL （同一形状・フットプリント） — 相違点: Package, Operating Temperature, Core, Core Architecture, Motor Control PWM.
クイック比較ツール — 並列比較する代替部品を選択:
DSPIC33EP64MC203T-E/TL
✅ ドロップイン📋 参考代替品（カタログ未掲載）
DSPIC33EP64MC203-I/TL
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP128MC203T-I/TL
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP32MC203T-I/TL
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$1.65 / 個
データシートを見る →DSPIC33EP64MC203T-I/MF
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP64MC203T-I/TL 最大定格＆電気的特性
| Core Architecture | 16-bit dsPIC DSC core |
| Core Speed | 60 MHz (70 MIPS family max) |
| Program Memory (Flash) | 64 KB (22K x 24) |
| RAM | 8 KB |
| Operating Voltage | 2.0 V to 3.6 V |
| パッケージ | 36-VTLA (5x5 mm) QFN, exposed pad |
| Motor Control PWM | Yes (MCPWM) |
| Quadrature Encoder Interface | Yes (QEI) |
| On-chip Operational Amplifiers | 3 |
| On-chip Comparators | 4 |
| Peripheral Trigger Generator | Yes (PTG) |
| Temperature Grade | -40C to +85C (I grade) |
| 実装タイプ | Surface Mount |
| Packaging | Tape & Reel (T suffix) |
| Supply Voltage Nominal | 3.3 V |
| RoHS ステータス | Compliant |
DSPIC33EP64MC203T-I/TL 36-vtla (5x5 mm) qfn, exposed pad ピン配置ガイド
DSPIC33EP64MC203T-I/TL (36-vtla (5x5 mm) qfn, exposed pad パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: DSPIC33EP64MC203T-I/TL.
詳細は データシート をご参照ください。
主な用途
DSPIC33EP64MC203T-I/TL の用途: 6 件s: BLDC / PMSM Motor Drives, Digital Power Supplies (PFC / LLC), Industrial Automation and Motion Control, Power Inverters and Solar Applications, Embedded Sensor Fusion and Precision Measurement, Automotive and E-Mobility Subsystems.
BLDC / PMSM Motor Drives
The DSPIC33EP64MC203T-I/TL is purpose-built for brushless DC and permanent magnet synchronous motor control. Its dedicated MCPWM module generates complementary PWM pairs with hardware dead-time insertion, while the QEI reads incremental encoder feedback for commutation and speed loops. The three on-chip op-amps condition shunt-resistor phase currents directly, and the four comparators provide cycle-by-cycle over-current limiting without external amplifiers. With the 60 MHz core executing field-oriented control at 16-20 kHz PWM frequencies, the DSC sustains full FOC math in every period, achieving efficient torque control in industrial drives, e-bikes, pumps, and HVAC blowers.
おすすめ
Digital Power Supplies (PFC / LLC)
In digitally controlled AC-DC and DC-DC converters, the DSPIC33EP64MC203T-I/TL replaces analog control loops with firmware-defined compensation. The high-speed 12-bit ADC samples output voltage and current synchronously with the PWM carrier, and the MCPWM module implements phase-shifted full-bridge or LLC control with precise dead time. The integrated comparators provide fast cycle-by-cycle current limiting independent of CPU load, protecting against short-circuit events within one switching cycle. The PTG offloads deterministic triggering sequences from software. Typical use cases include server power supplies, telecom rectifiers, and solar micro-inverters where efficiency standards demand adaptive, parameter-tunable control.
おすすめ
Industrial Automation and Motion Control
Factory automation nodes benefit from the DSPIC33EP64MC203T-I/TL's combination of encoder interfacing, DSP math, and industrial communication readiness. The QEI decodes quadrature signals from rotary encoders for positioning accuracy, while the DSP engine executes PID and feed-forward compensation for multi-axis motion. UART, SPI, and I2C interfaces connect to drivers, HMIs, and CAN transceivers for networked control. The Peripheral Trigger Generator sequences ADC sampling against mechanical events deterministically, and the integrated op-amps/comparators handle limit-switch and current-sense functions. Stepper drives, servo amplifiers, and pick-and-place mechanisms are representative deployments in this domain.
おすすめ
Power Inverters and Solar Applications
Grid-tie and off-grid inverter designs use the DSPIC33EP64MC203T-I/TL for DC-link management, MPPT algorithms, and sinusoidal PWM generation. The 70 MIPS-class DSP core performs the multiply-accumulate intensive MPPT search and grid synchronization (software PLL) with headroom, while the MCPWM module outputs center-aligned sinusoidal PWM with overlap control. On-chip comparators implement hardware fault trip zones for over-current, and the 12-bit ADC samples grid voltage and current synchronously for power-quality compliance. The 2.0V-3.6V supply simplifies interfacing with isolated feedback circuits. Residential string inverters and battery chargers are typical end products.
おすすめ
Embedded Sensor Fusion and Precision Measurement
The integrated analog front end makes the DSPIC33EP64MC203T-I/TL a compact signal-chain controller: three op-amps amplify bridge or shunt signals, the 12-bit ADC digitizes them, and the DSP engine applies filtering and calibration math on-chip. The PTG automates timed acquisition sequences without CPU intervention, reducing jitter in measurement windows. Four comparators add threshold detection for alarm generation. This suits load cells, pressure transmitters, and current-monitoring modules where a discrete amplifier-ADC-MCU stack would otherwise be required. The 5x5 mm 36-pin QFN also fits space-constrained sensor heads mounted directly on machinery.
おすすめ
Automotive and E-Mobility Subsystems
For automotive-adjacent designs, the AEC-Q100 qualified DSPIC33EP64MC203T-E/TL variant of this device (identical pinout and peripherals) enables use in e-mobility subsystems such as seat positioning motors, pump controls, and auxiliary inverter boards. The MCPWM/QEI/op-amp peripheral set covers the entire motor-control signal chain, supporting hall-sensor or encoder feedback commutation up to +125C ambient. CAN connectivity via an external transceiver integrates the node into vehicle networks. Designs may develop against the industrial -I grade part and migrate to the E-grade variant for production without PCB or firmware changes, since both share the same 36-VTLA footprint.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSPIC33EP64MC203T-I/TL — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSPIC33EP64MC203T-E/TL | DSPIC33EP128MC203T-I/TL | DSPIC33EP32MC203T-I/TL | DSPIC33EP64MC203T-I/MF |
|---|---|---|---|---|---|
| Package | 36-VTLA (5x5 mm) QFN, exposed pad | 36-VTLA (5x5 mm) - same | 36-VTLA (5x5 mm) - same | 36-VTLA (5x5 mm) - same | 36-VTLA (5x6 mm TQFN) - near-same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 64 KB | 64 KB | 128 KB | 32 KB | 64 KB |
| RAM | 8 KB | 8 KB | 16 KB | 4 KB | 8 KB |
| Operating Temperature | -40C to +85C | -40C to +125C | -40C to +85C | -40C to +85C | -40C to +85C |
| AEC-Q100 Qualified | No (industrial grade) | Yes | No | No | No |
| Op-Amps / Comparators | 3 / 4 | 3 / 4 | 3 / 4 | 3 / 4 | 3 / 4 |
| MCPWM / QEI | Yes / Yes | Yes / Yes | Yes / Yes | Yes / Yes | Yes / Yes |
主な差別化要因
- Integrated analog signal chain (3 op-amps + 4 comparators) （vs DSPIC33EP64GP503T-I/TL)
- AEC-Q100 automotive variant with identical footprint （vs DSPIC33EP64MC203T-E/TL)
- Flash scalability without redesign （vs DSPIC33EP128MC203T-I/TL)
設計ノート
The 36-VTLA exposed pad is not optional: solder it to a solid ground pour with an array of thermal vias (typically 4x4 grid of 0.3 mm vias). The pad provides the primary thermal path for the die and the ground return for the ADC/op-amp analog section. Skipping the pad solder connection is the most common cause of ADC noise floor degradation and thermal shutdown on this family. Follow the Microchip layout guidelines in the dsPIC33EP family reference manual for land-pattern dimensions.
Decouple each VDD/VSS pair with a 0.1uF ceramic capacitor placed within 2 mm of the pin, plus one bulk 4.7-10uF capacitor near the supply entry. The internal 1.8V regulator pin requires its own recommended capacitor per the datasheet. For motor-drive boards, isolate the analog 3.3V rail with an RC or ferrite filter to keep PWM switch-node noise out of ADC conversions; use the ADC synchronous-with-PWM sampling mode to further reject ripple.
Keep MCPWM output traces short and route them away from the QEI encoder inputs; motor-drive gate-drive dv/dt can capacitively couple into quadrature lines and corrupt position counting. Use the Peripheral Pin Select feature to place encoder inputs on pins adjacent to the connector. On integrated op-amp current-sense pins, add a small RC anti-alias filter (e.g., 1 kOhm / 1 nF) before the ADC input pin, and verify comparator trip latency under worst-case noise on the shunt line.
コンプライアンス情報
RoHS compliant and lead-free per standard Microchip dsPIC33EP packaging policy reflected in distributor listings. AEC-Q100 qualification applies to the -E temperature grade variant (DSPIC33EP64MC203T-E/TL), not this -I grade part.
