DSPIC33EP64MC503-I/M5 - 70 MIPS Motor Control DSC | Microchip
部品番号: DSPIC33EP64MC503-I/M5 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $3.42 | $3.42 |
| 10 | $3.24 | $32.40 |
| 100 | $2.96 | $296.00 |
| 500 | $2.78 | $1,390.00 |
| 1,000 | $2.58 | $2,580.00 |
DSPIC33EP64MC503-I/M5 概要
A digital signal controller combines the computational throughput of a DSP core with the deterministic interrupt structure and integrated peripherals of a microcontroller, placing the device above a standard MCU and below a standalone DSP in the embedded-processing hierarchy. dsPIC33E controllers are purpose-built for real-time control loops such as field-oriented motor control and digital power conversion.
Key features include the 70 MIPS dsPIC33E core, high-speed Motor Control PWM (MCPWM) peripherals, a Quadrature Encoder Interface (QEI) for positional feedback, three on-chip operational amplifiers, and four analog comparators - allowing sensorless and sensored motor-control systems to be built with minimal external analog circuitry.
Technically, the dsPIC33E core integrates DSP instructions, a hardware multiply-accumulate unit and two 40-bit accumulators, enabling fast execution of control algorithms such as Clarke/Park transforms and PID loops. Enhanced Flash and SRAM retention support field firmware updates, and multiple PGECx/PGEDx pin pairs provide flexible In-Circuit Serial Programming (ICSP) and debugging with Microchip tools such as PICkit and ICD.
Typical applications include brushless DC and permanent-magnet synchronous motor drives, power factor correction stages, digital power supplies, and industrial automation nodes requiring precise pulse-width modulation and encoder feedback.
Design consideration: because the /M5 UQFN-36 package has a small exposed thermal pad, provide a solid ground pour with thermal vias and connect all VDD/VSS pin pairs for reliable supply integrity and ICSP operation.
This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
ドロップイン代替品: DSPIC33EP64MC503-I/M5 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSPIC33EP64MC503-I/M5 （同一形状・フットプリント） — 相違点: Package, Operating Temperature, Core, CAN, RAM.
クイック比較ツール — 並列比較する代替部品を選択:
DSPIC33EP64MC503-E/TL
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$3.55 / 個
データシートを見る →DSPIC33EP32MC503-I/M5
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$2.98 / 個
データシートを見る →DSPIC33EP32MC503-E/TL
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP64GP503-I/M5
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$3.32 / 個
データシートを見る →DSPIC33EP64GP503-E/TL
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$3.48 / 個
データシートを見る →DSPIC33EP64MC503-I/M5 最大定格＆電気的特性
| Core Architecture | 16-bit dsPIC33E DSC |
| Maximum CPU Speed | 70 MIPS |
| Flash Program Memory | 64 KB (22K x 24) |
| RAM | 8 KB |
| パッケージ | 36-VTLA (UQFN, 5x5 mm) |
| Motor Control PWM | MCPWM |
| Quadrature Encoder Interface | QEI |
| On-chip Operational Amplifiers | 3 |
| On-chip Comparators | 4 |
| 実装タイプ | Surface Mount |
| 動作温度 | -40C to +85C (I suffix) |
| Programming / Debug | ICSP via PGECx/PGEDx pairs |
| Product Family | dsPIC33E Digital Signal Controllers |
DSPIC33EP64MC503-I/M5 36-vtla (uqfn, 5x5 mm) ピン配置ガイド
DSPIC33EP64MC503-I/M5 (36-vtla (uqfn, 5x5 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: DSPIC33EP64MC503-I/M5.
詳細は データシート をご参照ください。
主な用途
DSPIC33EP64MC503-I/M5 の用途: 6 件s: BLDC / PMSM Motor Drives, Digital Power Supplies and PFC, Industrial Automation and Motion Control, Sensor Signal Conditioning and Embedded Analog, Automotive and E-Mobility Auxiliary Systems, Portable Test and Measurement Instruments.
BLDC / PMSM Motor Drives
The DSPIC33EP64MC503-I/M5 is purpose-built for brushless DC and permanent-magnet synchronous motor drives. Its 70 MIPS DSP core executes field-oriented control (Clarke/Park transforms plus PID) with cycle-level determinism, while the dedicated MCPWM module generates complementary or independent PWM outputs with dead-time insertion. The Quadrature Encoder Interface decodes position feedback directly, and the three on-chip op-amps amplify shunt current-sense signals without external amplifiers. Four comparators provide cycle-by-cycle overcurrent protection. In a typical topology the DSC drives a three-phase inverter through gate drivers, sampling phase currents each PWM cycle; the integrated analog chain reduces BOM count and board area while keeping the current loop latency to a single PWM period.
おすすめ
Digital Power Supplies and PFC
Switch-mode power supplies, LLC converters and power-factor-correction stages benefit directly from this DSC's architecture. The high-speed MCPWM module supports phase-shifted and current-mode control topologies at switching frequencies well into the hundreds of kilohertz, and the 70 MIPS core closes voltage and current loops with single-cycle deterministic latency - a key requirement for stability in digital power. On-chip comparators implement fast cycle-by-cycle current limiting independent of the CPU, providing hardware-level fault response. The 64 KB Flash accommodates soft-start, burst-mode and telemetry firmware simultaneously. Placed between the feedback dividers and the gate-driver inputs, the DSC replaces discrete analog control ICs while enabling adaptive, firmware-updatable control laws and digital communication with a host controller.
おすすめ
Industrial Automation and Motion Control
In factory automation, the DSPIC33EP64MC503-I/M5 serves as a motion-control node coordinating steppers, servo motors and actuators. The QEI module accepts incremental encoder inputs directly, eliminating external decoder logic, while the MCPWM module positions motors with microstepping or servo profiles computed on the 70 MIPS core. The -40C to +85C industrial temperature grade (I suffix) suits control cabinets and machinery environments. Its multiple PGECx/PGEDx ICSP pin pairs allow field firmware updates through a maintenance connector without removing the board. Combined with a CAN transceiver, the DSC integrates into distributed control networks; the 8 KB RAM buffers trajectory setpoints and telemetry, and the 64 KB Flash retains motion profiles, safety limits and diagnostics across power cycles.
おすすめ
Sensor Signal Conditioning and Embedded Analog
The integrated three op-amps and four comparators make this DSC a compact analog signal-conditioning hub for sensor front ends. Weak signals from pressure, load-cell or current sensors can be amplified by the on-chip op-amps, thresholded by the comparators, and digitized by the ADC - all within one 5x5 mm package, reducing external component count in dense industrial IoT nodes and handheld instruments. The 70 MIPS core applies digital filtering and calibration algorithms on the sampled data, and the 64 KB Flash stores multi-point calibration tables. Because the analog peripherals are firmware-configurable, one PCB design can serve multiple sensor product variants by changing only software - a significant advantage over fixed-function analog front-end ICs in mixed-product production lines.
おすすめ
Automotive and E-Mobility Auxiliary Systems
Although this standard-grade part is not AEC-Q100 qualified, the same die in the extended-temperature DSPIC33EP64MC503-E/TL variant supports demanding auxiliary automotive systems such as electric water pumps, fuel pumps, HVAC blowers and throttle actuators. The MCPWM module drives the traction of auxiliary BLDC motors with sensorless or sensored control, the QEI reads position feedback from throttle or valve shafts, and the on-chip op-amps condition shunt current for torque estimation. In these systems the DSC typically runs a 10-20 kHz current loop and a slower speed loop on the 70 MIPS core, achieving smooth low-speed torque. For safety-critical traction or chassis applications, select Microchip's automotive-qualified variants instead of this standard part.
おすすめ
Portable Test and Measurement Instruments
Handheld and bench instruments - component testers, motor analyzers, power quality meters - use the DSPIC33EP64MC503-I/M5 as the processing core. The 70 MIPS DSP engine performs FFT and RMS computation on sampled waveforms, the ADC and on-chip analog peripherals capture signals with minimal external parts, and the compact 36-pin UQFN 5x5 mm package fits slim instrument enclosures. The 64 KB Flash holds the measurement firmware, calibration constants and display driver code, while the 8 KB RAM buffers waveform samples. The ICSP interface enables factory programming through the instrument's service connector. Battery-powered designs benefit from the single-supply architecture typical of the dsPIC33E family, and firmware-defined measurement functions allow a common hardware platform to host multiple instrument SKUs.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSPIC33EP64MC503-I/M5 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSPIC33EP64MC503-E/TL | DSPIC33EP32MC503-I/M5 | DSPIC33EP64GP503-I/M5 |
|---|---|---|---|---|
| Package | 36-VTLA (UQFN 5x5 mm) | 36-VTLA (UQFN 5x5 mm) - same | 36-VTLA (UQFN 5x5 mm) - same | 36-VTLA (UQFN 5x5 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| Flash Memory | 64 KB (22K x 24) | 64 KB (22K x 24) | 32 KB | 64 KB (22K x 24) |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB |
| Motor Control PWM (MCPWM) | Yes | Yes | Yes | No |
| Quadrature Encoder Interface | Yes | Yes | Yes | No |
| Operating Temperature | -40C to +85C (I) | -40C to +125C (E) | -40C to +85C (I) | -40C to +85C (I) |
主な差別化要因
- Complete motor-control analog integration on-chip （vs DSPIC33EP64GP503-I/M5)
- Double the program memory of the low-cost family member （vs DSPIC33EP32MC503-I/M5)
- Extended-temperature drop-in upgrade path （vs DSPIC33EP64MC503-E/TL)
設計ノート
The /M5 36-pin VTLA UQFN package has an exposed die-attach pad on the underside that must be soldered to a grounded copper pour for mechanical reliability and thermal performance. Place an array of thermal vias (typ. 4-9, 0.3 mm drill) under the pad connecting to the internal ground plane. Connect ALL VDD and VSS pin pairs - per the dsPIC33EP programming documentation, every VDD/VSS pair must be connected for both operation and ICSP. Keep the decoupling capacitor (100 nF ceramic per VDD pair, plus bulk 4.7-10 uF) within 2 mm of the pins.
During ICSP, PGECx and PGEDx pins must be used strictly as matched pairs: if PGEC2 carries ICSPCLK, the data must be on PGED2 - mixing pins from different pairs prevents programming. Avoid assigning PPS (Peripheral Pin Select) functions to your chosen ICSP pair during layout and firmware design, or reserve a programming header that exposes one complete pair plus MCLR. Additionally, leave MCLR pulled up through a 10k resistor with a provision for the programmer's voltage, so field firmware updates are possible without board rework.
When using the on-chip op-amps for current-sense amplification in motor drives, route the shunt resistor signal as a tight Kelvin pair directly to the op-amp input pins, and place the op-amp feedback network resistors close to the device. The comparators used for cycle-by-cycle overcurrent protection should reference a clean, filtered threshold - connect their reference inputs to a quiet analog supply rail or the internal reference rather than a switching-noise-contaminated digital rail. Separate the analog ground return of the shunts from the power ground of the inverter stage, joining at a single star point.
Estimated: for a motor-drive application the die dissipates only a few hundred milliwatts (core plus I/O at 3.3 V); the UQFN-36 pad soldered to 1 cm2 of copper typically keeps junction rise below 30C above a 70C ambient within the -40C to +85C (I) rating. For sustained operation above 85C ambient or in sealed enclosures, use the extended-temperature DSPIC33EP64MC503-E/TL drop-in variant rated to +125C and verify with a thermal camera in the final enclosure.
コンプライアンス情報
Active production part from Microchip Technology; exact compliance declarations for the -I/M5 ordering code were not present in the retrieved web data. This standard-grade part is not AEC-Q100 qualified; use Microchip automotive-grade variants for automotive applications. Request material declaration sheets from Microchip or XAIPART.
