DSPIC33FJ09GS302T-I/SO - 16-bit 40 MIPS DSC 9KB Flash | Microchip
部品番号: DSPIC33FJ09GS302T-I/SO ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $2.92 | $2.92 |
| 10 | $2.63 | $26.30 |
| 100 | $2.31 | $231.00 |
| 500 | $2.05 | $1,025.00 |
| 1,000 | $1.84 | $1,840.00 |
DSPIC33FJ09GS302T-I/SO 概要
A digital signal controller combines the computational throughput of a DSP with the peripherals and ease of use of a microcontroller, sitting within the broader hierarchy of MCU -> digital signal controller -> embedded processor. The dsPIC33F family is optimized for embedded control tasks that require fast math and deterministic real-time response, and the GS series within it targets digital power conversion.
Key features include the 16-bit dsPIC core executing up to 40 million instructions per second from 3.0V to 3.6V supply, high-speed PWM modules purpose-built for switch-mode power supplies, 9KB of self-programmable FLASH with write-erase control, and 1KB of on-chip RAM (1024 bytes). The T suffix denotes tape-and-reel delivery for automated pick-and-place assembly, and the I suffix denotes the industrial -40C to +85C temperature grade.
Architecturally, the device pairs a 16-bit modified Harvard RISC core with DSP engine instructions (MAC, DSP multiply) and analog peripherals suited to power conversion sensing and feedback loops, enabling closed-loop control of converters at switching frequencies well into the hundreds of kilohertz.
Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, and uninterruptible power supplies - use cases explicitly cited by Microchip for this SMPS-oriented family.
Design consideration: because the core runs at 3.0V to 3.6V, level-shift or select logic-compatible peripherals when interfacing to 5V systems, and budget the 9KB FLASH carefully, as complex control laws plus bootloader code can approach the 3K x 24 instruction limit.
This page synthesizes distributor listings, drop-in alternatives, pricing context, and practical design notes not consolidated in the manufacturer datasheet.
ドロップイン代替品: DSPIC33FJ09GS302T-I/SO — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSPIC33FJ09GS302T-I/SO （同一形状・フットプリント） — 相違点: Package, Packaging, Mounting Type, Operating Temperature, Core Processor.
クイック比較ツール — 並列比較する代替部品を選択:
DSPIC33FJ09GS302-I/SO
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$2.41 / 個
データシートを見る →DSPIC33FJ09GS302T-E/SO
✅ ドロップイン✓ 在庫あり
$2.15 / 個
データシートを見る →DSPIC33FJ09GS302-E/SO
✅ ドロップイン✓ 在庫あり
$2.69 / 個
データシートを見る →DSPIC33FJ16GS302-I/SO
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33FJ32GS302-I/SO
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33FJ09GS302T-I/SO 最大定格＆電気的特性
| Core Processor | dsPIC33FJ (dsPIC 33F) |
| Core Size | 16-bit |
| Architecture | dsPIC RISC / Digital Signal Controller |
| Maximum Performance | 40 MIPS |
| Program Memory Size | 9KB (3K x 24) FLASH |
| Data RAM Size | 1KB (1024 bytes) |
| Supply Voltage Range | 3.0 V to 3.6 V (3.3 V nominal) |
| 動作温度 | -40C to +85C (I grade) |
| パッケージ | 28-SOIC (0.295 in, 7.50mm width) |
| 実装タイプ | Surface Mount (SMD/SMT) |
| Packaging | Tape & Reel (T suffix) |
| ピン数 | 28 |
| Target Application Family | SMPS / digital power conversion |
| High-Speed PWM | Yes (dedicated SMPS PWM peripherals) |
| Typical Applications | AC-DC, DC-DC, PFC, UPS |
| RoHS ステータス | unknown |
| AEC-Q100 | unknown (E/SO variant referenced as AEC-Q100 qualified by distributor) |
DSPIC33FJ09GS302T-I/SO 28-soic (0.295 in, 7.50mm width) ピン配置ガイド
DSPIC33FJ09GS302T-I/SO (28-soic (0.295 in, 7.50mm width) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: DSPIC33FJ09GS302T-I/SO.
詳細は データシート をご参照ください。
主な用途
DSPIC33FJ09GS302T-I/SO の用途: 6 件s: AC-to-DC Converters, DC-to-DC Converters, Power Factor Correction (PFC), Uninterruptible Power Supplies (UPS), Multi-Loop Digital SMPS Control, Embedded Industrial Control with DSP Math.
AC-to-DC Converters
The DSPIC33FJ09GS302T-I/SO is purpose-built by Microchip for digitally controlled AC-to-DC conversion, offering a 40 MIPS dsPIC core and high-speed PWM peripherals that implement voltage- and current-mode control loops entirely in firmware. In a typical offline adapter, the controller samples the output and input conditions through its analog front end and drives PWM gates to regulate the DC bus with adaptive compensation. Running the control law digitally eliminates analog component drift and allows in-firmware tuning of transient response. The 9KB FLASH accommodates the control loop, housekeeping, and protection routines such as overload and brown-out handling, while the 3.0V-3.6V supply keeps controller power minimal relative to the converted load.
おすすめ
DC-to-DC Converters
For digitally controlled DC-to-DC conversion - buck, boost, and synchronous topologies - the DSPIC33FJ09GS302T-I/SO pairs its high-speed PWM units with a 16-bit core executing at 40 MIPS, giving loop bandwidths sufficient for fast transient response in intermediate bus and point-of-load converters. The controller reads feedback through its on-chip analog peripherals, computes the duty-cycle correction digitally, and updates PWM comparators within a switching cycle. Because compensation parameters live in the 9KB FLASH, one firmware image can serve multiple output-voltage SKUs, reducing board variants. Designers should note the 1KB RAM constrains very deep averaging buffers, so filter history must be budgeted carefully in control-law design.
おすすめ
Power Factor Correction (PFC)
Microchip explicitly lists Power Factor Correction among the target applications of this SMPS dsPIC family, and supports it with an Interleaved PFC reference design that works from universal AC input and delivers a high-voltage DC output up to 350W. The DSPIC33FJ09GS302T-I/SO shapes the input current waveform by sampling the rectified line, computing the current command in real time at 40 MIPS, and modulating the high-speed PWM with the phase control needed for interleaved stages. Digital PFC enables adaptive gain across the universal input range and firmware-based protections such as cycle-by-cycle current limiting. The industrial -40C to +85C rating suits enclosed power supplies and industrial front ends.
おすすめ
Uninterruptible Power Supplies (UPS)
The DSPIC33FJ09GS302T-I/SO fits UPS and inverter control where the dsPIC core must run multiple interacting loops - battery charging, inverter voltage regulation, and transfer switching - deterministically. Its 40 MIPS throughput handles the sine-wave PWM modulation math at carrier frequencies typical of UPS output stages, while the high-speed PWM peripherals provide the complementary drive timing and fault trip functionality that battery-backed conversion demands. The 9KB self-programmable FLASH allows field-updatable firmware for charging profiles, and the wide -40C to +85C industrial range covers equipment rooms and unconditioned sites. Microchip lists UPS explicitly among the applications supported by this family's SMPS feature set.
おすすめ
Multi-Loop Digital SMPS Control
The GS-series feature set of the DSPIC33FJ09GS302T-I/SO directly supports common multi-loop switch-mode power supply architectures, in which inner current loops and outer voltage or power loops must execute at different rates with predictable phase relationships. The controller's high-speed PWM modules support the dead-time, phase-shift, and complementary outputs required by half-bridge and full-bridge stages, while the 40 MIPS core runs nested loop computations without overflow. Because all control parameters reside in 9KB FLASH, gain scheduling across load ranges is a firmware exercise rather than an analog redesign. This makes the part attractive for configurable industrial supplies where one PCB must serve several output specifications.
おすすめ
Embedded Industrial Control with DSP Math
Beyond power conversion, the DSPIC33FJ09GS302T-I/SO serves as a compact 16-bit controller for industrial nodes that need DSP-class math - motor assist loops, sensor signal processing, and fast actuator control - within a 28-pin, 7.50mm SOIC footprint. The modified Harvard RISC core with DSP engine instructions executes multiply-accumulate operations in single cycles, and the industrial -40C to +85C rating plus 3.3V operation integrate cleanly with standard industrial logic levels. The 9KB FLASH suits fixed-function firmware, and tape-and-reel delivery (the T suffix) supports automated production. For code-heavy applications, the pin-compatible DSPIC33FJ16GS302 and DSPIC33FJ32GS302 provide migration headroom without PCB changes.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSPIC33FJ09GS302T-I/SO — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSPIC33FJ09GS302-I/SO | DSPIC33FJ09GS302T-E/SO | DSPIC33FJ16GS302-I/SO | DSPIC33FJ32GS302-I/SO |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-SOIC (7.50mm) | 28-SOIC (7.50mm) - same | 28-SOIC (7.50mm) - same | 28-SOIC (7.50mm) - same | 28-SOIC (7.50mm) - same |
| Core Performance | 16-bit dsPIC, 40 MIPS | 16-bit dsPIC, 40 MIPS | 16-bit dsPIC, 40 MIPS | 16-bit dsPIC, 40 MIPS | 16-bit dsPIC, 40 MIPS |
| FLASH Program Memory | 9KB (3K x 24) | 9KB (3K x 24) | 9KB (3K x 24) | 16KB | 32KB |
| Data RAM | 1KB | 1KB | 1KB | 1KB | 1KB |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Operating Temperature | -40C to +85C (I grade) | -40C to +85C | -40C to +125C (E grade) | -40C to +85C | -40C to +85C |
主な差別化要因
- Optimized specifically for digital SMPS control （vs DSPIC33FJ16GS302-I/SO)
- Tape-and-reel production packaging （vs DSPIC33FJ09GS302-I/SO)
- Industrial temperature range at lower cost than E grade （vs DSPIC33FJ09GS302T-E/SO)
- Trade-off: limited program memory （vs DSPIC33FJ32GS302-I/SO)
設計ノート
The DSPIC33FJ09GS302T-I/SO runs from a single 3.0V-3.6V rail. Decouple each VDD pin with a 0.1uF ceramic capacitor placed within 2-3mm of the pin, plus one bulk 4.7uF-10uF capacitor near the package. In SMPS applications the controller sits next to power-switching stages, so route the digital supply away from gate-drive returns; a local ferrite bead feeding the controller rail reduces coupling of switching edges into the analog and digital supplies.
Budget the 9KB (3K x 24 instruction) FLASH before committing firmware. A full PFC or multi-loop SMPS control law plus a bootloader and communications stack can approach the limit; if your linker map exceeds roughly 80% usage, plan migration to the pin-compatible DSPIC33FJ16GS302-I/SO early rather than late, since the same 28-SOIC footprint makes it a zero-rework upgrade. Also confirm supply tolerance: the absolute core range is 3.0V-3.6V and regulator tolerance must keep the rail inside it under all load transients.
Keep the high-speed PWM outputs as short and direct as possible to their gate-driver inputs; long traces on a power-conversion PCB act as antennas and pick up switching noise. Place the in-circuit programming (PGD/PGC) header on the layout from the first revision - the 28-SOIC has no socketed option, so firmware updates require either the header or board removal. Follow Microchip's GS-family SMPS reference designs for grounding: a single quiet analog ground island for feedback sensing, star-connected to the power ground at one point.
Estimated: at 3.3V and typical controller operating currents for the dsPIC33FJ family (tens of milliamps), internal power dissipation is on the order of 0.1-0.2W, which a 28-SOIC with modest copper dissipation handles without a heatsink. Thermal constraints instead come from board-level ambient: the I grade is rated -40C to +85C ambient, so verify the actual air temperature at the controller location in enclosed supplies; above that, select the E-grade DSPIC33FJ09GS302T-E/SO, which is the same footprint.
コンプライアンス情報
Provided web data does not state RoHS/REACH status for the -I grade. A distributor (Microchip USA) describes the E-grade variant DSPIC33FJ09GS302T-E/SO as AEC-Q100 qualified; qualification status for this exact -I/SO ordering code is not confirmed in the provided data. Verify compliance on the Microchip product page before release.
