DSPIC33FJ32MC204T-I/ML - 16-bit 40 MIPS DSC 32KB Flash | Microchip
部品番号: DSPIC33FJ32MC204T-I/ML ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
DSPIC33FJ32MC204T-I/ML 概要
A Digital Signal Controller combines the computational architecture of a digital signal processor - single-cycle MAC, barrel shifter, DSP instruction set - with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP, making the dsPIC33F family a de facto standard for embedded motor control, digital power conversion, and sensor fusion systems.
Key features of the DSPIC33FJ32MC204T-I/ML include two PWM generators with independent timebases for complementary or independent motor-control outputs, the Peripheral Pin Select (PPS) capability that allows digital peripherals to be flexibly mapped to physical I/O pins, and up to 40 MIPS operation from an internal PLL, eliminating the need for an external high-frequency crystal. The device supports seamless migration paths to and from PIC24F, PIC24H, and dsPIC30F families.
Architecturally, the dsPIC33FJ core uses a modified Harvard 16-bit pipeline with DSP-enhanced instructions, a 17-bit by 17-bit hardware multiplier, and 40-bit wide accumulators, enabling efficient execution of control-loop algorithms such as field-oriented control (FOC) for PMSM and BLDC motors. The flash-based program memory supports in-circuit self-programming for field firmware updates.
Typical applications include BLDC and PMSM motor drives, digital SMPS and power factor correction converters, inverters for solar and UPS systems, and industrial automation control nodes. The dual independent PWM timebases make it particularly well suited to dual-motor or converter-plus-PFC topologies on a single controller.
When designing with this device, note that it operates from a single 3.0V to 3.6V supply typical of the dsPIC33F family, and the QFN exposed pad should be soldered to a grounded copper pour for thermal and signal-integrity reasons. Verify PPS pin mapping early in the layout, as remapping after routing is constrained.
This page synthesizes distributor pricing context, verified drop-in alternatives, and practical motor-control design notes not found in a single manufacturer datasheet.
ドロップイン代替品: DSPIC33FJ32MC204T-I/ML — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSPIC33FJ32MC204T-I/ML （同一形状・フットプリント） — 相違点: Package, Core, DMA Channels, Data Bus Width, Flash Program Memory.
クイック比較ツール — 並列比較する代替部品を選択:
DSPIC33FJ64MC204T-I/ML
✅ ドロップイン✓ 在庫あり
$5.42 / 個
データシートを見る →DSPIC33FJ32MC204T-E/ML
✅ ドロップイン📋 参考代替品（カタログ未掲載）
DSPIC33FJ32MC204T-H/ML
✅ ドロップイン📋 参考代替品（カタログ未掲載）
DSPIC33FJ16MC304
✅ ドロップイン📋 参考代替品（カタログ未掲載）
DSPIC33FJ32GP304-I/ML
✅ ドロップイン✓ 在庫あり
$3.49 / 個
データシートを見る →DSPIC33FJ32MC204T-I/ML 最大定格＆電気的特性
| Core Architecture | 16-bit dsPIC33F |
| Max CPU Speed | 40 MIPS |
| Max Clock Frequency | 40 MHz |
| Program Memory Size | 32 KB (Flash) |
| SRAM Size | 2 KB |
| パッケージ | 44-QFN (8x8 mm), ML |
| Package Type | PQCC-44, 0.650 mm terminal pitch |
| PWM Generators | 2 with independent timebases |
| Pin Mapping | Peripheral Pin Select (PPS) |
| 動作温度 | -40C to +85C (I grade) |
| 実装タイプ | Surface Mount |
| DSP Features | Single-cycle MAC, barrel shifter, 40-bit accumulators |
| Family Migration | Compatible with PIC24F, PIC24H, dsPIC30F |
| Packaging | Tape and Reel (T suffix) |
DSPIC33FJ32MC204T-I/ML pqcc-44, 0.650 mm terminal pitch ピン配置ガイド
DSPIC33FJ32MC204T-I/ML (pqcc-44, 0.650 mm terminal pitch パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: DSPIC33FJ32MC204T-I/ML.
詳細は データシート をご参照ください。
主な用途
DSPIC33FJ32MC204T-I/ML の用途: 6 件s: BLDC/PMSM Motor Drives, Digital Switch-Mode Power Supplies, Solar Inverters and UPS Systems, Industrial Automation Control Nodes, Battery-Powered Portable Instruments, Electric Vehicle Auxiliary Systems.
BLDC/PMSM Motor Drives
The DSPIC33FJ32MC204T-I/ML fits brushless DC and permanent-magnet synchronous motor control because its two PWM generators with independent timebases generate the complementary, dead-band-controlled switching patterns required for three-phase inverters. The 40 MIPS 16-bit DSP core with single-cycle MAC and 40-bit accumulators runs field-oriented control (FOC) inner current loops fast enough for high-dynamic servo performance, while 32 KB Flash holds the FOC algorithm, startup sequencing, and communication stack together. Peripheral Pin Select lets designers position encoder (QEI) and UART pins optimally on the 44-QFN footprint. Placed as the single controller driving a gate-driver stage, the DSC replaces discrete control logic; the trade-off versus newer dsPIC33CK parts is lower PWM resolution, acceptable below roughly 20 kHz switching for most industrial drives.
おすすめ
Digital Switch-Mode Power Supplies
In digital SMPS and power factor correction (PFC) stages, the DSPIC33FJ32MC204T-I/ML's dual independent PWM timebases are ideal: one timebase can run the PFC converter while the second runs the downstream DC-DC stage, replacing two controllers or a controller-plus-PFC-IC combination. The 40 MIPS core executes average-current-mode control loops with proportional-integral compensators in software, and the DSP MAC accelerates the notch and low-pass filtering of feedback signals. Using the QFN-44 package keeps the controller compact near the power stage. A key performance consideration is ADC sampling latency relative to the PWM cycle - trigger the ADC from the PWM timebase for jitter-free control-loop sampling, a technique documented in Microchip's digital power application references.
おすすめ
Solar Inverters and UPS Systems
Grid-tie solar micro-inverters and online UPS systems need simultaneous control of an MPPT converter and a DC-AC inverter stage - precisely the two-independent-timebase topology of the DSPIC33FJ32MC204T-I/ML. The 32 KB Flash accommodates MPPT search algorithms (perturb-and-observe or incremental conductance), grid-synchronization software (software phase-locked loop using the DSP accumulate instructions), and safety state machines. Running at 40 MIPS, the core sustains the 10-20 kHz control update rates typical of single-phase inverters. The industrial -40C to +85C rating suits outdoor inverter enclosures. Designers should budget Flash carefully, as 32 KB fills quickly once grid-compliance and anti-islanding logic is added; the pin-compatible DSPIC33FJ64MC204T-I/ML provides headroom without a PCB change.
おすすめ
Industrial Automation Control Nodes
As an automation node controller, the DSPIC33FJ32MC204T-I/ML combines sufficient 40 MIPS compute for local closed-loop control with Peripheral Pin Select flexibility that lets one hardware platform serve conveyor, actuator, and sensor-aggregator variants purely through firmware pin remapping. Multiple remappable UART/SPI instances over the 44-QFN's RPn pins connect motor drives, HMI, and fieldbus transceivers simultaneously. The 16-bit architecture with hardware DSP support handles PID loops for process control faster than 8-bit MCUs while consuming far less power than application processors. The QFN-44's exposed pad soldered to a ground pour provides both thermal relief and a low-inductance ground reference important in electrically noisy factory environments with VFD-generated EMI.
おすすめ
Battery-Powered Portable Instruments
Portable instrumentation benefits from the DSPIC33FJ32MC204T-I/ML's combination of 40 MIPS burst performance and the dsPIC33F family's low-power operating modes, which allow the controller to sleep between measurement cycles. The 16-bit DSP engine performs FFT-based spectral analysis and digital filtering of sensor data on-device, while 32 KB Flash retains calibration tables and a local logging application. Peripheral Pin Select permits a single PCB to accept different sensor modules (UART, SPI, or I2C-class peripherals mapped as needed). The 44-QFN 8x8 mm package occupies roughly 64 mm2, compact for handheld layouts, though its 0.5 mm-class lead pitch requires careful reflow assembly. Designers should verify current draw in each low-power mode against battery budget early, as sleep-mode figures were not captured in the verified data for this page.
おすすめ
Electric Vehicle Auxiliary Systems
In electric and hybrid vehicles, auxiliary motor systems - coolant pumps, HVAC blowers, throttle actuators - use the DSPIC33FJ32MC204T-I/ML as a cost-effective 16-bit DSC where full automotive-qualified dsPIC33EP parts are unnecessary. The dual PWM timebases drive a small three-phase inverter for a pump or blower, the DSP core runs sensorless back-EMF or Hall-based commutation at 40 MIPS, and the -40C to +85C industrial grade covers most cabin and chassis-adjacent zones. Peripheral Pin Select simplifies sharing one controller board across multiple actuator variants. Note that for zones requiring AEC-Q100 qualification, this -I grade part must be replaced by Microchip's automotive-qualified family members; verified qualification data for this specific MPN was not available in the collected web data.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSPIC33FJ32MC204T-I/ML — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSPIC33FJ64MC204T-I/ML | DSPIC33FJ32MC204T-E/ML | DSPIC33FJ16MC304 | DSPIC33FJ32GP304-I/ML |
|---|---|---|---|---|---|
| Package | 44-QFN (8x8 mm, ML) | 44-QFN (8x8 mm, ML) - same | 44-QFN (8x8 mm, ML) - same | 44-QFN (8x8 mm, ML) - same | 44-QFN (8x8 mm, ML) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS |
| Flash Memory | 32 KB | 64 KB | 32 KB | 16 KB | 32 KB |
| SRAM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB |
| PWM Generators | 2 with independent timebases | 2 with independent timebases | 2 with independent timebases | 2 with independent timebases | Standard output-compare PWM (GP family) |
| Temperature Grade | -40C to +85C (I) | -40C to +85C (I) | Extended (E grade) | -40C to +85C (I) | -40C to +85C (I) |
主な差別化要因
- Dedicated dual motor-control PWM with independent timebases （vs DSPIC33FJ32GP304-I/ML)
- Double Flash upgrade without PCB change （vs DSPIC33FJ16MC304)
- Industrial temperature grade at standard cost （vs DSPIC33FJ32MC204T-E/ML)
設計ノート
The 44-QFN (8x8 mm) package includes an exposed center pad that must be soldered to a VSS ground pour. Use a grid of thermal vias (approximately 4x4, 0.3 mm drill) under the pad connecting to internal ground planes - this serves both thermal dissipation and a low-inductance ground return critical for the fast PWM edge transitions used in motor drive inverters. Follow the land pattern in the Microchip family data sheet (document 70283K) package section; reflow profiles for QFN center-pad voiding below 25% are recommended per standard QFN assembly practice.
Exploit Peripheral Pin Select (PPS) during schematic capture, not after routing. Map PWM outputs away from the crystal pins and analog inputs first, and reserve pins near the gate-driver connector for the PWM peripheral. Lock the PPS mapping in firmware by writing the PPSLOCK sequence after configuration, preventing accidental runtime remapping from a code fault. Because PPS registers are write-once-lockable per the dsPIC33F family reference manual, decide pin assignment before firmware freeze - re-routing a 44-pin QFN board late in a project is expensive.
The DSPIC33FJ32MC204T-I/ML is a Tape and Reel (T suffix) part; verify your assembly house accepts full reels or order cut-tape separately. Second, 32 KB Flash and 2 KB SRAM fill quickly with FOC plus communication stacks - reserve roughly 15% Flash headroom for field updates or move to the pin-compatible DSPIC33FJ64MC204T-I/ML. Third, this is the industrial -I grade: automotive applications requiring AEC-Q100 qualification need a different, qualified Microchip family member, so confirm qualification requirements before final BOM release.
コンプライアンス情報
Compliance data was not present in the verified web data collected on 2026-09-27. Confirm RoHS/REACH status on the Microchip product page or Microchip USA listing before release.
