EFM32G222F32G-E-QFP48 - 32MHz ARM MCU | Silicon Labs
部品番号: EFM32G222F32G-E-QFP48 ✓ 生産中EFM32G222F32G-E-QFP48 概要
A microcontroller is a semiconductor device that integrates a CPU core, memory, and peripherals such as timers, communication interfaces, and GPIO into one programmable device. The EFM32G222 belongs to the EFM32 Gecko family, a 32-bit MCU platform positioned between simple 8-bit controllers and higher-performance Cortex-M systems. It provides enough computational capability for protocol handling, sensor acquisition, actuator control, and local system management while supporting designs that must conserve energy.
The most important headline resources are the 32 MHz Cortex-M3 core, 32 KB Flash, 8 KB RAM, and 37 digital I/O pins. Three 16-bit timers support periodic timing, pulse measurement, and timing-critical control functions. The 48-TQFP package also provides a conventional leaded footprint that can simplify assembly and prototype rework compared with very fine-pitch land-grid-array or leadless packages. Device-specific operating limits, supply voltage, peripheral inventory, and temperature ratings should be confirmed in the manufacturer datasheet before design release.
EFM32 Gecko devices are built around the ARM Cortex-M3 architecture, which supports efficient exception-based control and a mature embedded software ecosystem. The platform includes low-power techniques intended to reduce current consumption during idle periods, while fast wake-up support can shorten the interval between activity and application execution. The 8 KB RAM supports working state, buffers, and peripheral data handling, while the 32 KB Flash provides room for firmware, configuration, and calibration data.
Typical uses include connected sensors, industrial monitoring, building controls, portable instruments, energy meters, motor-control auxiliaries, and compact battery-powered equipment. Its combination of 37 GPIO pins and three timers is particularly useful when a design needs multiple discrete inputs, status indicators, communication lines, and deterministic timing functions without requiring a larger microcontroller package.
PCB planning should preserve access to all 48 package leads and route sensitive clock, reset, and communication signals away from noisy switching nodes. Confirm the device's exact power pins, ground requirements, decoupling recommendations, and exposed programming or debug interface assignments from the manufacturer pin-description table before assigning connector positions or laying out the board.
This product record combines manufacturer specifications, package details, sourcing information, and same-package replacement guidance with practical design notes. It helps engineers evaluate the EFM32G222F32G-E-QFP48 as a compact, low-energy Cortex-M3 controller while separating verified device facts from parameters that require final datasheet confirmation.
ドロップイン代替品: EFM32G222F32G-E-QFP48 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EFM32G222F32G-E-QFP48 (同一形状・フットプリント) — 相違点: Package, Flash Memory, Digital I/O Pins, Maximum CPU Frequency, Product Type.
EFM32G222F32-QFP48
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32TG222F32-QFP48
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32ZG222F32-QFP48
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32HG222F32G-A-QFP48
✅ ドロップイン📋 参考代替品(カタログ未掲載)
EFM32GG222F32G-QFP48
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
EFM32G222F32G-E-QFP48 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 KB (32K x 8 bits) |
| RAM | 8 KB |
| Digital I/O Pins | 37 pins |
| Timer Count | 3 timers |
| Timer Resolution | 16 bits per timer |
| Processor Architecture | ARM Cortex-M3, 32-bit |
| Device Family | EFM32 Gecko |
| パッケージ | 48-TQFP, 7 mm x 7 mm |
| ピン数 | 48 pins |
| 実装タイプ | Surface mount |
EFM32G222F32G-E-QFP48 48-tqfp, 7 mm x 7 mm ピン配置ガイド
EFM32G222F32G-E-QFP48 (48-tqfp, 7 mm x 7 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EFM32G222F32G-E-QFP48.
詳細は データシート をご参照ください。
主な用途
EFM32G222F32G-E-QFP48 の用途: 6 件s: Industrial Sensor Monitoring, Smart Building Controls, Portable Energy Meter, Motor Control Auxiliary, Connected IoT Peripheral, Battery-Powered Instrument.
Industrial Sensor Monitoring
The EFM32G222F32G-E-QFP48 fits distributed sensor nodes that must acquire measurements, evaluate thresholds, and report status while minimizing energy use. Its 32 MHz ARM Cortex-M3 core provides ample control capability for sensor conditioning and communication routines, while 8 KB RAM can hold working state and short data buffers. The 37 digital I/O pins support digital sensors, interrupt inputs, alarm outputs, and configuration switches without requiring a large pin-count package. Three 16-bit timers can divide sensor sampling, debounce timing, and periodic reporting tasks. In a battery or energy-harvesting installation, the Gecko low-power architecture and fast wake-up behavior help limit the time the controller remains active. Final sleep current, wake-up timing, and analog input specifications must be checked in the manufacturer datasheet.
おすすめ
Smart Building Controls
The EFM32G222F32G-E-QFP48 is suitable for building-control endpoints that operate relays, read switches, and coordinate low-rate communications. Its 37 digital I/O pins provide practical connectivity for occupancy inputs, door contacts, status LEDs, and actuator-control signals, while three 16-bit timers support timing functions such as debounce, pulse measurement, and delayed outputs. The 32 KB Flash stores application firmware and configuration, and the 8 KB RAM accommodates protocol state and event buffers. Its Cortex-M3 architecture is more capable than an 8-bit controller while retaining a compact 48-pin TQFP footprint. For wall-mounted or powered equipment, this balance simplifies control logic. Confirm the device's electrical limits for externally connected lines and use the manufacturer pin table to plan isolation, surge protection, and connector placement.
おすすめ
Portable Energy Meter
The EFM32G222F32G-E-QFP48 can serve as the control core in a compact energy meter that accumulates measurements, records operating states, and drives a local display or communication interface. The 32 MHz Cortex-M3 core supports interrupt-driven measurement handling, and the three 16-bit timers can divide sampling intervals or capture pulse-duration information. With 32 KB Flash and 8 KB RAM, the device can retain calibration parameters and a limited rolling data buffer in a 7 mm by 7 mm package. The Gecko family's low-energy focus is valuable in utility meters and portable instruments that spend substantial time between updates. Designers should verify ADC characteristics, timer capture behavior, and low-energy current figures against the manufacturer datasheet before selecting it for metrology-grade measurement chains.
おすすめ
Motor Control Auxiliary
The EFM32G222F32G-E-QFP48 is appropriate for supervisory and auxiliary control around a small motor system, particularly when separate logic handles monitoring rather than direct power switching. Its three 16-bit timers can support timing sequences, input capture, or periodic background tasks, while 37 GPIO pins can connect limit switches, Hall or sensor signals, status indicators, and communications. The 32 MHz Cortex-M3 core can execute closed-loop supervisory logic, fault detection, and communication protocols with predictable interrupt handling. Its compact 48-TQFP package also makes it useful where the controller must be placed near a motor assembly. The MCU should not be assumed to drive power-stage transistors directly; use suitable gate drivers and protection networks, and verify pin tolerances against the motor environment.
おすすめ
Connected IoT Peripheral
The EFM32G222F32G-E-QFP48 works well as the local controller in a small IoT peripheral that converts sensor inputs into a network message and manages local status indicators or actuators. Its 37 digital I/O pins leave room for a communication interface, sensors, buttons, and discrete outputs, while 32 KB Flash accommodates a networking stack and application firmware. The 32 MHz Cortex-M3 core can support packet processing and firmware updates without requiring a higher-performance processor. Energy-sensitive products can use the Gecko platform's low-energy modes to reduce consumption between transmissions. Confirm the exact UART, SPI, I2C, USB, and radio-interface assignments from the manufacturer datasheet, then allocate pull-ups, level shifting, and antenna clearances according to the selected external communications component.
おすすめ
Battery-Powered Instrument
The EFM32G222F32G-E-QFP48 is a strong candidate for battery-powered instruments that combine local measurement, digital controls, and periodic data transfer. The 32 MHz Cortex-M3 core supports responsive user-interface and measurement logic, and 8 KB RAM provides space for buffers without immediately requiring external memory. Three 16-bit timers can coordinate acquisition intervals, button handling, and indicator timing, while the 37 GPIO pins support displays, switches, sensors, and serial peripherals. Low-energy modes and fast wake-up capabilities help preserve operating time between user interactions. The 48-pin TQFP package also provides accessible leads for assembly and rework in compact instruments. Battery life calculations should use the manufacturer's specified current in each relevant mode, including wake-up and analog-configuration effects, rather than estimating consumption from CPU frequency alone.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EFM32G222F32G-E-QFP48 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EFM32G222F32-QFP48 | EFM32TG222F32-QFP48 | EFM32ZG222F32-QFP48 | EFM32HG222F32G-A-QFP48 | EFM32GG222F32G-QFP48 |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) |
主な差別化要因
- Larger RAM allocation than the Tiny and Zero Gecko alternatives (vs EFM32TG222F32-QFP48)
- Additional 16-bit timer resource (vs EFM32ZG222F32-QFP48)
- Higher clock speed and Cortex-M3 processing architecture (vs EFM32ZG222F32-QFP48)
設計ノート
Assign the board footprint from the manufacturer's 48-pin TQFP drawing rather than treating every 48-pin component as interchangeable. Keep power and ground connections short, place required decoupling capacitors at the associated pins, and provide clean return paths for high-speed switching around the device. The 0.5 mm lead pitch also requires a PCB design capable of fine-pitch assembly, and pin 1 orientation must be checked against both the package marking and the chosen board footprint.
Route clock, programming, reset, and communication signals away from motors, relays, switching regulators, and inductors. Use a continuous ground reference beneath and around the MCU, minimize loop areas for power distribution, and place any external crystal or timing components according to the manufacturer reference layout. Although the TQFP leads are individually accessible, keeping sensitive nets short and quiet remains important for reliable wake-up behavior and stable peripheral measurements.
Design the supply rail around the device's exact operating-voltage limits, startup behavior, and current consumption from the manufacturer datasheet. Use the recommended bypass-capacitance values and account for capacitor voltage derating and tolerance. If the MCU shares a rail with switching circuitry, verify startup sequencing, transient margin, and the maximum input voltage before finalizing the power tree; CPU frequency alone does not determine the allowable rail range.
Do not treat every 48-pin EFM32 family member as a drop-in replacement solely because the package matches. EFM32TG222 and EFM32ZG222 use less RAM and fewer timers than the target, while the Zero Gecko also changes the processor core and maximum clock rate. Compare GPIO multiplexing, peripheral inventory, memory requirements, firmware compatibility, and every assigned package lead against the manufacturer documentation before releasing a substitution.
コンプライアンス情報
RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation or declaration files.