Silicon Labs

EFM32G222F32G-E-QFP48 - 32MHz ARM MCU | Silicon Labs

MPN: EFM32G222F32G-E-QFP48 ✓ Active
48-TQFP, 7 mm x 7 mm Package 32 MHz Speed 32 KB (32K x 8 bits) Memory
MOQ: 1 |

EFM32G222F32G-E-QFP48 Overview

The Silicon Labs EFM32G222F32G-E-QFP48 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 KB of Flash memory, 8 KB of RAM, and 37 digital I/O pins in a 48-pin TQFP package measuring 7 mm by 7 mm. The Gecko MCU combines a compact general-purpose processor with low-energy operating modes, fast wake-up behavior, and a broad collection of embedded peripherals for energy-sensitive control systems.

A microcontroller is a semiconductor device that integrates a CPU core, memory, and peripherals such as timers, communication interfaces, and GPIO into one programmable device. The EFM32G222 belongs to the EFM32 Gecko family, a 32-bit MCU platform positioned between simple 8-bit controllers and higher-performance Cortex-M systems. It provides enough computational capability for protocol handling, sensor acquisition, actuator control, and local system management while supporting designs that must conserve energy.

The most important headline resources are the 32 MHz Cortex-M3 core, 32 KB Flash, 8 KB RAM, and 37 digital I/O pins. Three 16-bit timers support periodic timing, pulse measurement, and timing-critical control functions. The 48-TQFP package also provides a conventional leaded footprint that can simplify assembly and prototype rework compared with very fine-pitch land-grid-array or leadless packages. Device-specific operating limits, supply voltage, peripheral inventory, and temperature ratings should be confirmed in the manufacturer datasheet before design release.

EFM32 Gecko devices are built around the ARM Cortex-M3 architecture, which supports efficient exception-based control and a mature embedded software ecosystem. The platform includes low-power techniques intended to reduce current consumption during idle periods, while fast wake-up support can shorten the interval between activity and application execution. The 8 KB RAM supports working state, buffers, and peripheral data handling, while the 32 KB Flash provides room for firmware, configuration, and calibration data.

Typical uses include connected sensors, industrial monitoring, building controls, portable instruments, energy meters, motor-control auxiliaries, and compact battery-powered equipment. Its combination of 37 GPIO pins and three timers is particularly useful when a design needs multiple discrete inputs, status indicators, communication lines, and deterministic timing functions without requiring a larger microcontroller package.

PCB planning should preserve access to all 48 package leads and route sensitive clock, reset, and communication signals away from noisy switching nodes. Confirm the device's exact power pins, ground requirements, decoupling recommendations, and exposed programming or debug interface assignments from the manufacturer pin-description table before assigning connector positions or laying out the board.

This product record combines manufacturer specifications, package details, sourcing information, and same-package replacement guidance with practical design notes. It helps engineers evaluate the EFM32G222F32G-E-QFP48 as a compact, low-energy Cortex-M3 controller while separating verified device facts from parameters that require final datasheet confirmation.

Drop-in alternatives for EFM32G222F32G-E-QFP48 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with EFM32G222F32G-E-QFP48 (same form factor and footprint) — differing in Package, Flash Memory, Digital I/O Pins, Maximum CPU Frequency, Product Type.

Silicon Labs
Package: 48-pin TQFP (7x7 mm)
Flash Memory: 32 kB (32K × 8)
Digital I/O Pins: 37
Compare with EFM32G222F32G-E-QFP48 →
Silicon Labs
Package: 48-pin TQFP (7 x 7 mm)
Flash Memory: 32 kB
Compare with EFM32G222F32G-E-QFP48 →
Silicon Labs
Package: 48-TQFP (7 x 7 mm)
Flash Memory: 32 kB
Digital I/O Pins: 37
Compare with EFM32G222F32G-E-QFP48 →

EFM32G222F32-QFP48

✅ Drop-In
Silicon Labs
📦 48-TQFP (7 mm x 7 mm)
32-bit ARM Cortex-M3 microcontroller · 32 MHz · 32 kB (32K × 8) · 8 kB · 37 · 3 × 16-bit timers · ARM Cortex-M3 · 32-bit RISC

Contact for price

View Datasheet →

EFM32TG222F32-QFP48

✅ Drop-In
Silicon Labs
📦 48-TQFP (7 mm x 7 mm)
32-bit ARM Cortex-M3 microcontroller · 32 MHz · ARM Cortex-M3, 32-bit · 32 kB · 4 kB · 37 pins · 2 timers · 16-bit

Contact for price

View Datasheet →

EFM32ZG222F32-QFP48

✅ Drop-In
Silicon Labs
📦 48-TQFP (7 mm x 7 mm)
32-bit ARM Cortex-M0+ microcontroller · EFM32 Zero Gecko · 24 MHz · 32 kB · 4 kB · 37 · 2 x 16-bit timers · 1.98 V to 3.8 V

Contact for price

View Datasheet →

EFM32HG222F32G-A-QFP48

✅ Drop-In
📦 48-TQFP (7 mm x 7 mm)
Same-family 48-pin Gecko placement, but the grade suffix and detailed resource differences require confirmation from the manufacturer datasheet

📋 Reference alternative (not in catalog)

EFM32GG222F32G-QFP48

✅ Drop-In ⚠️ Specs Unverified
📦 48-TQFP (7 mm x 7 mm)
Same Gecko family and 48-pin footprint, with exact Flash, RAM, timer, core, and temperature differences requiring orderable-code verification

📋 Reference alternative (not in catalog)

EFM32G222F32G-E-QFP48 Maximum Ratings & Electrical Characteristics

Product Type 32-bit ARM Cortex-M3 microcontroller
Maximum CPU Frequency 32 MHz
Flash Memory 32 KB (32K x 8 bits)
RAM 8 KB
Digital I/O Pins 37 pins
Timer Count 3 timers
Timer Resolution 16 bits per timer
Processor Architecture ARM Cortex-M3, 32-bit
Device Family EFM32 Gecko
Package 48-TQFP, 7 mm x 7 mm
Pin Count 48 pins
Mounting Type Surface mount

EFM32G222F32G-E-QFP48 48-tqfp, 7 mm x 7 mm Pin Configuration Guide

Pin configuration for EFM32G222F32G-E-QFP48 (48-tqfp, 7 mm x 7 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

48-tqfp, 7 mm x 7 mm package pinout diagram for EFM32G222F32G-E-QFP48

No detailed pinout data available for EFM32G222F32G-E-QFP48.

Refer to the datasheet for full pin configuration.

Typical Applications

EFM32G222F32G-E-QFP48 is suitable for 6 applications: Industrial Sensor Monitoring, Smart Building Controls, Portable Energy Meter, Motor Control Auxiliary, Connected IoT Peripheral, Battery-Powered Instrument.

🏭

Industrial Sensor Monitoring

The EFM32G222F32G-E-QFP48 fits distributed sensor nodes that must acquire measurements, evaluate thresholds, and report status while minimizing energy use. Its 32 MHz ARM Cortex-M3 core provides ample control capability for sensor conditioning and communication routines, while 8 KB RAM can hold working state and short data buffers. The 37 digital I/O pins support digital sensors, interrupt inputs, alarm outputs, and configuration switches without requiring a large pin-count package. Three 16-bit timers can divide sensor sampling, debounce timing, and periodic reporting tasks. In a battery or energy-harvesting installation, the Gecko low-power architecture and fast wake-up behavior help limit the time the controller remains active. Final sleep current, wake-up timing, and analog input specifications must be checked in the manufacturer datasheet.

🏭

Smart Building Controls

The EFM32G222F32G-E-QFP48 is suitable for building-control endpoints that operate relays, read switches, and coordinate low-rate communications. Its 37 digital I/O pins provide practical connectivity for occupancy inputs, door contacts, status LEDs, and actuator-control signals, while three 16-bit timers support timing functions such as debounce, pulse measurement, and delayed outputs. The 32 KB Flash stores application firmware and configuration, and the 8 KB RAM accommodates protocol state and event buffers. Its Cortex-M3 architecture is more capable than an 8-bit controller while retaining a compact 48-pin TQFP footprint. For wall-mounted or powered equipment, this balance simplifies control logic. Confirm the device's electrical limits for externally connected lines and use the manufacturer pin table to plan isolation, surge protection, and connector placement.

⚡

Portable Energy Meter

The EFM32G222F32G-E-QFP48 can serve as the control core in a compact energy meter that accumulates measurements, records operating states, and drives a local display or communication interface. The 32 MHz Cortex-M3 core supports interrupt-driven measurement handling, and the three 16-bit timers can divide sampling intervals or capture pulse-duration information. With 32 KB Flash and 8 KB RAM, the device can retain calibration parameters and a limited rolling data buffer in a 7 mm by 7 mm package. The Gecko family's low-energy focus is valuable in utility meters and portable instruments that spend substantial time between updates. Designers should verify ADC characteristics, timer capture behavior, and low-energy current figures against the manufacturer datasheet before selecting it for metrology-grade measurement chains.

🔧

Motor Control Auxiliary

The EFM32G222F32G-E-QFP48 is appropriate for supervisory and auxiliary control around a small motor system, particularly when separate logic handles monitoring rather than direct power switching. Its three 16-bit timers can support timing sequences, input capture, or periodic background tasks, while 37 GPIO pins can connect limit switches, Hall or sensor signals, status indicators, and communications. The 32 MHz Cortex-M3 core can execute closed-loop supervisory logic, fault detection, and communication protocols with predictable interrupt handling. Its compact 48-TQFP package also makes it useful where the controller must be placed near a motor assembly. The MCU should not be assumed to drive power-stage transistors directly; use suitable gate drivers and protection networks, and verify pin tolerances against the motor environment.

🧩

Connected IoT Peripheral

The EFM32G222F32G-E-QFP48 works well as the local controller in a small IoT peripheral that converts sensor inputs into a network message and manages local status indicators or actuators. Its 37 digital I/O pins leave room for a communication interface, sensors, buttons, and discrete outputs, while 32 KB Flash accommodates a networking stack and application firmware. The 32 MHz Cortex-M3 core can support packet processing and firmware updates without requiring a higher-performance processor. Energy-sensitive products can use the Gecko platform's low-energy modes to reduce consumption between transmissions. Confirm the exact UART, SPI, I2C, USB, and radio-interface assignments from the manufacturer datasheet, then allocate pull-ups, level shifting, and antenna clearances according to the selected external communications component.

🔧

Battery-Powered Instrument

The EFM32G222F32G-E-QFP48 is a strong candidate for battery-powered instruments that combine local measurement, digital controls, and periodic data transfer. The 32 MHz Cortex-M3 core supports responsive user-interface and measurement logic, and 8 KB RAM provides space for buffers without immediately requiring external memory. Three 16-bit timers can coordinate acquisition intervals, button handling, and indicator timing, while the 37 GPIO pins support displays, switches, sensors, and serial peripherals. Low-energy modes and fast wake-up capabilities help preserve operating time between user interactions. The 48-pin TQFP package also provides accessible leads for assembly and rework in compact instruments. Battery life calculations should use the manufacturer's specified current in each relevant mode, including wake-up and analog-configuration effects, rather than estimating consumption from CPU frequency alone.

What is the EFM32G222F32G-E-QFP48?
The EFM32G222F32G-E-QFP48 is a 32-bit ARM Cortex-M3 microcontroller with a maximum clock speed of 32 MHz, 32 KB of Flash memory, 8 KB of RAM, and 37 digital I/O pins. According to the Silicon Labs product page, it belongs to the EFM32 Gecko family and is intended for energy-sensitive embedded applications. The device is offered in a 48-pin TQFP package measuring 7 mm by 7 mm.
What are the key specifications of EFM32G222F32G-E-QFP48?
The EFM32G222F32G-E-QFP48 combines an ARM Cortex-M3 core operating up to 32 MHz with 32 KB of Flash, 8 KB of RAM, 37 digital I/O pins, and three 16-bit timers. According to the Silicon Labs product-page specification, these resources support compact control systems requiring several interfaces, deterministic timing, and low-energy operation. The physical package is a 48-pin TQFP measuring 7 mm by 7 mm.
Where can I download the EFM32G222F32G-E-QFP48 datasheet PDF?
The official EFM32G222F32G-E-QFP48 technical information is available from the Silicon Labs EFM32 Gecko device page. The manufacturer page provides the device specifications and links to supporting documentation. Use the manufacturer pin-description table for the authoritative assignment of all 48 TQFP leads and confirm supply, clock, reset, and peripheral requirements before final schematic review.
Where can I find the EFM32G222F32G-E-QFP48 pinout?
The EFM32G222F32G-E-QFP48 pinout is identified in the Silicon Labs manufacturer documentation for the 48-pin TQFP package. Use the datasheet pin-description table when assigning tracks, test points, and programming-header contacts because peripheral functions may be multiplexed onto the same I/O pins. The device-page specification confirms the 48-pin 7 mm by 7 mm package and its 37 digital I/O pins.
How much memory does the EFM32G222F32G-E-QFP48 have?
The EFM32G222F32G-E-QFP48 contains 32 KB of Flash memory organized as 32K by 8 bits and 8 KB of RAM. According to the Silicon Labs product page, the Flash stores firmware and configuration data while the RAM supports working state and peripheral buffers. This memory footprint suits compact control, monitoring, and protocol-handling tasks that do not require an external memory interface.
Is the EFM32G222F32G-E-QFP48 suitable for low-power applications?
The EFM32G222F32G-E-QFP48 is suitable for energy-sensitive designs because the EFM32 Gecko platform emphasizes low-power operating techniques, fast wake-up behavior, and energy-saving modes. According to the Silicon Labs device page, the MCU reaches 32 MHz when processing and includes 32 KB Flash and 8 KB RAM. Final current-consumption comparisons should use the manufacturer operating-mode and temperature tables.
What can replace the EFM32G222F32G-E-QFP48?
The closest same-family replacements include EFM32G222F32-QFP48, EFM32TG222F32-QFP48, EFM32ZG222F32-QFP48, and EFM32HG222F32G-A-QFP48 in the 48-pin package family. These parts are not electrically identical: the Tiny and Zero Gecko variants have less RAM and fewer timers, while the Zero Gecko uses a Cortex-M0+ core at 24 MHz. Use the Request a Quote form to discuss the exact replacement and sourcing requirements.
What is the best drop-in replacement for EFM32G222F32G-E-QFP48?
EFM32G222F32-QFP48 is the closest same-family replacement because it uses the same Gecko MCU, 32 MHz Cortex-M3 core, 32 KB Flash, 8 KB RAM, three 16-bit timers, and 48-pin package. According to Silicon Labs listings, both identifiers appear in the same device family. Before substitution, verify the significance of the orderable suffix and compare every assigned pin against the manufacturer datasheet.
Can EFM32TG222F32-QFP48 replace EFM32G222F32G-E-QFP48?
EFM32TG222F32-QFP48 is a same-package 48-pin Cortex-M3 option, but it is not an exact functional replacement. According to the Silicon Labs product page, it provides 32 MHz operation and 32 KB Flash but only 4 KB RAM and two 16-bit timers, compared with 8 KB RAM and three timers for the Gecko target. Confirm memory use and timer assignments before treating it as drop-in.
Can EFM32ZG222F32-QFP48 replace EFM32G222F32G-E-QFP48?
EFM32ZG222F32-QFP48 is not a drop-in functional match for code requiring the target Cortex-M3 resources. According to the Silicon Labs product page, it uses a Cortex-M0+ core operating up to 24 MHz and provides 4 KB RAM with two 16-bit timers. It remains useful for a redesigned 32 MHz, 8 KB RAM, three-timer system only after software and peripheral migration.
When should I choose EFM32G222F32G-E-QFP48 over EFM32TG222F32-QFP48?
Choose EFM32G222F32G-E-QFP48 when the design benefits from 8 KB RAM and three 16-bit timers rather than the Tiny Gecko device's 4 KB RAM and two timers. Both families support up to 32 MHz with an ARM Cortex-M3 core according to Silicon Labs. The Gecko choice is preferable when runtime buffers, task state, or an additional timer are necessary.
Where can I buy EFM32G222F32G-E-QFP48 online?
Use the Request a Quote form on this page to request EFM32G222F32G-E-QFP48 availability, current commercial terms, and a quantity-matched quotation. The form allows engineers to specify the required quantity and packaging without relying on a static price table. Confirm lifecycle status and lead time at the time of each production or prototype order.
What is the price of EFM32G222F32G-E-QFP48?
Current EFM32G222F32G-E-QFP80 pricing is handled through the Request a Quote form on this page. Submit the required quantity, package preference, and target delivery date to obtain a current quotation. The form is the appropriate route for commercial review because availability and order conditions can change independently of the device's technical specifications.
What is the lead time for EFM32G222F32G-E-QFP48?
The current lead time for EFM32G222F32G-E-QFP48 should be confirmed through the Request a Quote form on this page. Include the order quantity, target shipment date, and whether reels, trays, or another approved delivery format are required. This allows the commercial response to reflect the manufacturing schedule and packaging requested for the design.
Is EFM32G222F32G-E-QFP48 in stock?
EFM32G222F32G-E-QFP48 availability should be checked through the Request a Quote form on this page. Include the quantity and required packaging so the response can distinguish prototype availability from larger production schedules. The form provides a direct, current sourcing channel and avoids treating a distributor snapshot as a guaranteed inventory commitment.

Engineering reference data for EFM32G222F32G-E-QFP48 — comparison, design guidance, and compliance information.

Selection Guide

Choose EFM32G222F32G-E-QFP48 when a design benefits from the complete Gecko resource set of a 32 MHz Cortex-M3 core, 32 KB Flash, 8 KB RAM, 37 GPIO pins, and three 16-bit timers. EFM32G222F32-QFP48 is the closest orderable alternative when the suffix difference has been validated against the manufacturer documentation. Consider EFM32TG222F32-QFP48 only when 4 KB RAM and two timers are sufficient and its reduced RAM does not affect firmware behavior. EFM32ZG222F32-QFP48 requires more substantial software review because it changes to a 24 MHz Cortex-M0+ core and also reduces RAM and timer count. The EFM32HG222F32G-A-QFP48 and EFM32GG222F32G-QFP48 entries should remain conditional choices until their grade, peripheral, and pin assignments are confirmed from manufacturer documentation.

Comparison with Alternatives

Parameter This Product EFM32G222F32-QFP48 EFM32TG222F32-QFP48 EFM32ZG222F32-QFP48 EFM32HG222F32G-A-QFP48 EFM32GG222F32G-QFP48
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 48-TQFP (7 mm x 7 mm) 48-TQFP (7 mm x 7 mm) 48-TQFP (7 mm x 7 mm) 48-TQFP (7 mm x 7 mm) 48-TQFP (7 mm x 7 mm) 48-TQFP (7 mm x 7 mm)

Key Differentiators

  • Larger RAM allocation than the Tiny and Zero Gecko alternatives (vs EFM32TG222F32-QFP48)
  • Additional 16-bit timer resource (vs EFM32ZG222F32-QFP48)
  • Higher clock speed and Cortex-M3 processing architecture (vs EFM32ZG222F32-QFP48)

Design Notes

Assign the board footprint from the manufacturer's 48-pin TQFP drawing rather than treating every 48-pin component as interchangeable. Keep power and ground connections short, place required decoupling capacitors at the associated pins, and provide clean return paths for high-speed switching around the device. The 0.5 mm lead pitch also requires a PCB design capable of fine-pitch assembly, and pin 1 orientation must be checked against both the package marking and the chosen board footprint.

Route clock, programming, reset, and communication signals away from motors, relays, switching regulators, and inductors. Use a continuous ground reference beneath and around the MCU, minimize loop areas for power distribution, and place any external crystal or timing components according to the manufacturer reference layout. Although the TQFP leads are individually accessible, keeping sensitive nets short and quiet remains important for reliable wake-up behavior and stable peripheral measurements.

Design the supply rail around the device's exact operating-voltage limits, startup behavior, and current consumption from the manufacturer datasheet. Use the recommended bypass-capacitance values and account for capacitor voltage derating and tolerance. If the MCU shares a rail with switching circuitry, verify startup sequencing, transient margin, and the maximum input voltage before finalizing the power tree; CPU frequency alone does not determine the allowable rail range.

Do not treat every 48-pin EFM32 family member as a drop-in replacement solely because the package matches. EFM32TG222 and EFM32ZG222 use less RAM and fewer timers than the target, while the Zero Gecko also changes the processor core and maximum clock rate. Compare GPIO multiplexing, peripheral inventory, memory requirements, firmware compatibility, and every assigned package lead against the manufacturer documentation before releasing a substitution.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation or declaration files.

Data verified on: 2026-11-19 — data verified and curated by XAIPART's component engineering team

Related Searches

EFM32G222F32G-E-QFP48 datasheet EFM32G222F32G-E-QFP48 specifications EFM32G222F32G-E-QFP48 pinout EFM32G222F32G-E-QFP48 pdf EFM32G222F32G-E-QFP48 price EFM32G222F32G-E-QFP48 stock EFM32G222F32G-E-QFP48 equivalent EFM32G222F32G-E-QFP48 replacement Silicon Labs EFM32G222F32G-E-QFP48 EFM32G222F32G-E-QFP48 32MHz Cortex-M3 EFM32G222F32G-E-QFP48 48-TQFP EFM32G222F32G-E-QFP48 low power MCU EFM32G222F32G-E-QFP48 vs EFM32TG222F32-QFP48 EFM32G222F32G-E-QFP48 footprint

Related Components & Terms

Silicon Labs EFM32G222F32G-E-QFP48 EFM32G222F32-QFP48 EFM32TG222F32-QFP48 EFM32ZG222F32-QFP48 EFM32HG222F32G-A-QFP48 EFM32GG222F32G-QFP48 EFM32 Gecko ARM Cortex-M3 ARM Cortex-M0+ microcontroller MCU embedded microcontroller semiconductor 32 KB Flash 8 KB RAM 37 digital I/O pins three 16-bit timers 48-TQFP QFP package family surface-mount low-power MCU IoT sensor controller industrial monitoring
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details