Silicon Labs

EFM32G280F32-QFP100 - 32MHz Cortex-M3 MCU | Silicon Labs

部品番号: EFM32G280F32-QFP100 ✓ 生産中
2.5 V to 3.3 V Vdss 100-pin LQFP (14 x 14 mm) Package 32 MHz Speed 32 kB (32K x 8) Memory
MOQ: 1 |

EFM32G280F32-QFP100 概要

Silicon Labs EFM32G280F32-QFP100 is a 32-bit ARM Cortex-M3 Gecko microcontroller rated up to 32 MHz, with 32 kB of flash memory, 8 kB of RAM, and 86 digital I/O pins in a 100-pin LQFP package measuring 14 x 14 mm. The device combines conventional embedded-control processing with energy-saving modes and fast wake-up behavior for energy-conscious systems.

A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and I/O into one compact component. The EFM32G280 belongs to the EFM32 Gecko family, a hierarchy of ARM Cortex-M3 microcontrollers designed for embedded control, low-power sensing, communications, and industrial applications. Its architecture provides general-purpose computation alongside dedicated timers and energy-management functions.

The EFM32G280F32-QFP100 includes 3 x 16-bit timers, 86 digital I/O pins, and operation up to 32 MHz. Its 32 kB flash stores firmware, while 8 kB RAM supports working data, stack space, and peripheral buffers. The 100-pin LQFP provides enough connections for external sensing interfaces, communications, control outputs, and debug or programming access without relying on a very small package.

The Cortex-M3 processor supports a 32-bit instruction set and an efficient embedded-control architecture. Silicon Labs positions the Gecko platform around low-energy operation, rapid transitions from energy-saving states, and multiple sleep-related operating modes. These characteristics help reduce the average energy consumed by systems that spend much of their time monitoring inputs rather than executing continuous computation.

Typical applications include low-power sensor nodes, connected industrial equipment, environmental monitoring, compact control systems, and energy-harvesting products. The combination of 86 digital I/O pins and three 16-bit timers is particularly useful when a design needs multiple discrete inputs, timing channels, motor or actuator control, and communication peripherals on a single controller.

PCB implementation should preserve the 100-pin LQFP footprint, provide clean grounding, and route sensitive signal paths away from switching nodes. Designers should also budget flash and RAM for the complete firmware, interrupt handlers, and application state rather than relying only on nominal application-code size. Confirm the complete pin assignments and peripheral multiplexing in the manufacturer pinout table before final routing.

This page consolidates the manufacturer specifications, package information, sourcing guidance, and design considerations needed to evaluate the EFM32G280F32-QFP100. It also identifies the constraints involved in finding a genuine same-footprint replacement, rather than presenting devices with incompatible memory sizes or peripheral configurations as drop-in choices.

ドロップイン代替品: EFM32G280F32-QFP100 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

EFM32G280F32G-E-QFP100

✅ ドロップイン
📦 100-LQFP (14 x 14 mm)
Same 32 MHz core class, 32 kB flash, and 8 kB RAM; ordering suffix differs by 0% in the stated memory and frequency ratings

📋 参考代替品(カタログ未掲載)

EFM32G280F32-QFP100 最大定格&電気的特性

Product Type 32-bit ARM Cortex-M3 microcontroller
Maximum CPU Frequency 32 MHz
Flash Memory 32 kB (32K x 8)
RAM 8 kB
Digital I/O Pins 86 pins
Timers 3 x 16-bit timers
Processor Core ARM Cortex-M3
Architecture 32-bit RISC
パッケージ 100-pin LQFP (14 x 14 mm)
実装タイプ Surface mount
電源電圧 2.5 V to 3.3 V
Core Count 1 core
Programmable I/O 86 digital I/O pins
Energy-Saving Modes Multiple low-energy operating modes

EFM32G280F32-QFP100 100-pin lqfp (14 x 14 mm) ピン配置ガイド

EFM32G280F32-QFP100 (100-pin lqfp (14 x 14 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

EFM32G280F32-QFP100 の 100-pin lqfp (14 x 14 mm) パッケージピン配置図

詳細なピン配置データはありません: EFM32G280F32-QFP100.

詳細は データシート をご参照ください。

主な用途

EFM32G280F32-QFP100 の用途: 6 件s: Low-Power Environmental Sensor Node, Industrial Condition Monitoring, Connected Building Control, Motor and Actuator Control, Battery-Powered Data Acquisition, Energy-Saving Portable Instrument.

🧩

Low-Power Environmental Sensor Node

The EFM32G280F32-QFP100 fits environmental monitoring nodes that sample sensors, filter readings, and remain inactive for long periods. Its 32 MHz ARM Cortex-M3 core can process local measurements without a higher-power processor, while the 86 digital I/O pins can accommodate sensing inputs, alarms, status indicators, and communications links. The device’s energy-saving modes and fast wake-up behavior are especially useful in battery-operated installations that alternate between measurement and sleep. For a 3.3 V system, its stated 2.5 V to 3.3 V operating range is compatible with common sensor and radio supply arrangements. Designers should allocate the 8 kB RAM for acquisition buffers, protocol state, and the stack, and reserve part of the 32 kB flash for firmware updates or dual-image storage.

🏭

Industrial Condition Monitoring

The EFM32G280F32-QFP100 is suitable for industrial condition-monitoring equipment that combines several digital inputs with periodic measurement and alarm functions. Its 86 digital I/O pins reduce the need for external I/O expanders when connecting switch states, discrete sensors, relay drivers, and status signals. Three 16-bit timers support periodic sampling, timeout management, and timing functions, while the 32 MHz Cortex-M3 core provides enough performance for local signal conditioning and communication framing. The 100-pin LQFP also leaves room for debug, programming, and interface signals without an extremely compact package. A robust implementation should isolate external field wiring, protect I/O pins from surge events, and validate the device’s operating-temperature grade against the installation environment.

🌐

Connected Building Control

The EFM32G280F32-QFP100 can serve as the local controller in a connected building system combining occupancy sensors, lighting controls, HVAC interfaces, and remote status reporting. Its 86 digital I/O pins provide substantial control capacity, and the three 16-bit timers are useful for periodic polling, actuator sequencing, and communication timeouts. The 32 MHz Cortex-M3 core can handle protocol tasks and application logic while the low-energy modes reduce consumption during idle periods. Because multiple loads may be inductive or switch noisy, the design should keep motor, relay, and switching-regulator paths away from sensitive sensor inputs. Firmware should also include communication retries and actuator state checks, since the 8 kB RAM must be carefully budgeted when several communication buffers are active.

⚡

Motor and Actuator Control

The EFM32G280F32-QFP100 is appropriate for compact actuator-control boards requiring a responsive processor, multiple digital signals, and dedicated timing resources. Its three 16-bit timers can be allocated among control-loop timing, input capture, output compare, and periodic maintenance tasks, while 86 digital I/O pins allow connection of position sensors, limit switches, drivers, and status signals. The 32 MHz Cortex-M3 core supports deterministic supervisory logic without requiring a larger microcontroller. A practical design should use external driver circuitry for motors and high-current loads, include pull resistors and protection networks on exposed signals, and route return currents away from the MCU. Firmware timing should be verified against the actuator’s mechanical and electrical requirements because nominal CPU frequency alone does not guarantee a particular control-loop rate.

📟

Battery-Powered Data Acquisition

The EFM32G280F32-QFP100 supports compact battery-powered data-acquisition systems that gather several sensor channels and store or transmit processed results. The 32 kB flash provides space for application firmware and moderate local buffering, while 8 kB RAM can hold active samples and communication structures. Its 86 digital I/O pins make it practical to connect multiplexed inputs, trigger signals, and peripheral status lines without adding a large I/O expander. The processor’s 32 MHz rating provides useful throughput for calibration, filtering, and packet preparation. Low-energy operation should be designed at the system level: switch off unused peripherals, avoid continuous polling, and place the controller into an appropriate sleep mode between acquisition events. ADC-specific accuracy and peripheral timing must be evaluated from the family documentation.

🔧

Energy-Saving Portable Instrument

The EFM32G280F32-QFP100 suits portable measurement instruments where display updates, sensor acquisition, and user inputs must be handled without continuous full-power operation. Its 32 MHz Cortex-M3 core can execute the measurement sequence and interface logic, while the low-energy platform supports fast transitions between active work and energy-saving states. The three 16-bit timers provide capture and periodic timing functions, and 86 digital I/O pins leave capacity for buttons, indicators, sensors, and serial links. In a compact handheld design, the 100-pin LQFP is larger than a leadless package but simplifies prototype assembly and provides generous routing access around the device. Power-budget calculations should include regulator losses, pull networks, and indicator consumption so that estimated battery life reflects the complete load rather than only the MCU sleep current.

おすすめ製品の概要

EFM32G280F32-QFP100 Silicon Labs 使用用途: Low-Power Environmental Sensor Node, Industrial Condition Monitoring, Connected Building Control, Motor and Actuator Control, Battery-Powered Data Acquisition, Energy-Saving Portable Instrument EFM32G280F32G-E-QFP100 Same-family 100-LQFP configuration 使用用途: Low-Power Environmental Sensor Node, Industrial Condition Monitoring, Connected Building Control, Motor and Actuator Control, Battery-Powered Data Acquisition, Energy-Saving Portable Instrument
What are the key specifications of EFM32G280F32-QFP100 that engineers should know?
The EFM32G280F32-QFP100 is a 32 MHz ARM Cortex-M3 microcontroller with 32 kB of flash, 8 kB of RAM, 86 digital I/O pins, and three 16-bit timers in a 100-pin LQFP package. According to the Silicon Labs product page, its low-power platform includes energy-saving modes and fast wake-up behavior. The 14 x 14 mm package provides a practical balance between pin availability and PCB footprint size for embedded systems requiring moderate processing performance and substantial I/O.
What is the operating voltage of EFM32G280F32-QFP100?
The EFM32G280F32-QFP100 operates from 2.5 V to 3.3 V. This operating range matches the stated 2.5 V or 3.3 V supply options for the EFM32G280 device and is suitable for conventional low-voltage embedded systems. The manufacturer datasheet should be used for the exact operating limits of individual supply pins, I/O domains, and power-management configurations before the regulator and decoupling network are finalized.
Where can I download the EFM32G280F32-QFP100 datasheet PDF?
The EFM32G280F32-QFP100 datasheet PDF is available from the EFM32G280 documentation link listed on this page. The Silicon Labs product page provides the device-specific specifications, while the EFM32G280 datasheet describes the family architecture, peripherals, pin descriptions, electrical characteristics, and package information. Use the manufacturer pin-description table when assigning signals and check the revision corresponding to the production device before releasing the PCB.
Where can I find the EFM32G280F32-QFP100 pinout?
The EFM32G280F32-QFP100 pinout is documented in the pin-description section of the EFM32G280 datasheet and on the Silicon Labs device page for the 100-LQFP package. The package has 100 pins in a 14 x 14 mm LQFP outline. Because several pins can support alternate peripheral functions, assign each net from the exact pin name, alternate-function table, and package drawing rather than inferring connectivity from neighboring signals.
How much flash and RAM does EFM32G280F32-QFP100 have?
The EFM32G280F32-QFP100 contains 32 kB of flash memory and 8 kB of RAM. The manufacturer device page identifies the memory configuration directly, while the distributor listing describes the flash organization as 32K x 8. When selecting this MCU, budget the complete firmware image, bootloader, interrupt routines, stack, peripheral buffers, and application data against these capacities rather than relying on application code size alone.
What can replace EFM32G280F32-QFP100?
The closest identified replacement is EFM32G280F32G-E-QFP100, which uses the same 100-pin LQFP format and retains the 32 kB flash and 8 kB RAM configuration. The ordering-code difference should still be checked against the manufacturer ordering table for temperature, packaging, and approved-part status. No cross-brand MCU is established as a true drop-in replacement because peripheral mapping, pin multiplexing, memory, and firmware support must all match.
Is EFM32G280F32-QFP100 suitable for low-power sensor applications?
The EFM32G280F32-QFP100 is suitable for low-power sensor applications because its low-power platform provides energy-saving modes and fast wake-up behavior. It also offers 86 digital I/O pins for sensor inputs, control signals, and communications. The Cortex-M3 core can handle local filtering and data preparation while the MCU spends much of its operating cycle asleep, helping conserve battery energy in periodically sampled systems.
EFM32G280F32-QFP100 vs EFM32G280F32G-E-QFP100: which is better?
EFM32G280F32-QFP100 and EFM32G280F32G-E-QFP100 both identify a 32 MHz EFM32G280 configuration with 32 kB flash, 8 kB RAM, and a 100-pin LQFP package. The G-E ordering suffix indicates a distinct ordering configuration that should be reviewed for qualification and packaging requirements. Choose the exact orderable MPN approved for production rather than assuming that a similar suffix is interchangeable without consulting the manufacturer ordering information.
When should I choose EFM32G280F32-QFP100 over a larger EFM32G280 variant?
Choose EFM32G280F32-QFP100 when the design needs a 32 MHz Cortex-M3 core, up to 86 digital I/O pins, 32 kB of flash, and 8 kB of RAM but does not require a larger memory footprint. A higher-density family member may be preferable when firmware growth, larger data buffers, or additional communication peripherals would exceed the F32 configuration. Confirm the intended peripheral set and final firmware requirements before fixing the MCU.
Is EFM32G280F32-QFP100 suitable for industrial control systems?
The EFM32G280F32-QFP100 is suitable for many industrial control functions because it combines a 32 MHz Cortex-M3 processor, three 16-bit timers, and 86 digital I/O pins in one package. The timers can support periodic measurement, motor or actuator timing, and control-loop tasks, while the I/O count reduces the need for external expansion logic. Validate temperature grade, isolation, EMC requirements, and long-term availability for the specific industrial environment.
How many timers and digital I/O pins does EFM32G280F32-QFP100 provide?
The EFM32G280F32-QFP100 provides 3 x 16-bit timers and 86 digital I/O pins. According to the Silicon Labs product page, these resources support multiple timing channels and a broad selection of external interfaces. Their practical allocation depends on the alternate-function and package pin tables, so verify that every required timer output, communication signal, and control line can be assigned simultaneously without conflicts.
Where can I buy EFM32G280F32-QFP100 and what is its price?
Use the Request a Quote form on this page to obtain current pricing, stock status, minimum order quantity, and lead time for the EFM32G280F32-QFP100. Quote requests should include the exact MPN, target quantity, delivery location, and required production schedule. Because MCU availability and commercial terms can change by volume and market conditions, a current written quotation is more reliable than a static price reference.
What is the lead time and stock status of EFM32G280F32-QFP100?
Current stock and lead time for the EFM32G280F32-QFP100 should be confirmed through the Request a Quote form on this page. The request should state the annual and build-level quantities, target date, and whether date-code or traceability requirements apply. This approach also helps distinguish a factory-supported order from a nonstandard supply arrangement and supports better production planning.
What is the best Microchip equivalent for EFM32G280F32-QFP100?
No Microchip MCU is established as a drop-in equivalent for the EFM32G280F32-QFP100. Cross-brand substitutions would require matching the 100-pin footprint, 32 MHz processing requirement, memory capacity, peripheral functions, pin multiplexing, and firmware ecosystem. The EFM32G280F32G-E-QFP100 is the closer identified alternative because it retains the same family, memory class, and 100-pin package; a cross-brand MCU should be treated as a redesign candidate.
Is EFM32G280F32-QFP100 RoHS compliant?
The RoHS status of EFM32G280F32-QFP100 should be confirmed from the current Silicon Labs product declaration or material-compliance documentation for the exact orderable MPN. This page does not infer environmental declarations from the package type or distributor listing. For production release, request the applicable RoHS and REACH declarations and retain them with the product qualification records for the selected part.

エンジニアリング参考データ: EFM32G280F32-QFP100 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the EFM32G280F32-QFP100 when a design requires a 32 MHz ARM Cortex-M3 controller, 32 kB of flash, 8 kB of RAM, and as many as 86 digital I/O pins in a 100-LQFP package. It is well matched to low-power sensing, industrial monitoring, building control, portable instruments, and compact acquisition systems where the Gecko energy-saving modes are valuable. Select EFM32G280F32G-E-QFP100 when that ordering configuration satisfies the required qualification and production terms while retaining the same core, memory, and package ratings. Avoid larger-memory EFM32G280 variants when their additional flash is unnecessary and the exact target configuration is preferred for BOM control. A cross-brand Cortex-M3 MCU should not be treated as a drop-in option; it requires pin-mapping, peripheral, clock, firmware, and qualification review. If the final firmware exceeds the 32 kB flash or the active working set exceeds 8 kB RAM, move to a higher-density member instead of forcing the F32 design.

代替品との比較

パラメータ この製品 EFM32G280F32G-E-QFP100
Brand Silicon Labs Silicon Labs
Package 100-LQFP (14 x 14 mm) 100-LQFP (14 x 14 mm)
Processor Core ARM Cortex-M3 ARM Cortex-M3
Maximum CPU Frequency 32 MHz 32 MHz
Flash Memory 32 kB 32 kB
RAM 8 kB 8 kB
Digital I/O Pins 86 pins 86 pins
Timers 3 x 16-bit timers 3 x 16-bit timers
Supply Voltage 2.5 V to 3.3 V 2.5 V to 3.3 V

主な差別化要因

  • Retains the compact memory profile while offering broad I/O capacity (vs EFM32G280F128-QFP100)
  • Matches the key processing and memory ratings of the closest ordering alternative (vs EFM32G280F32G-E-QFP100)
  • Provides extensive pin availability for embedded control without an external expander (vs EFM32G280F128-QFP100)

設計ノート

Route the EFM32G280F32-QFP100 on a PCB footprint matching its 100-pin LQFP outline. Start assignment with the manufacturer pin-description table, then resolve alternate-function conflicts for timers, communications, debug, and general-purpose I/O. Keep the crystal or clock circuitry close to the relevant pins, provide continuous ground-plane return paths, and avoid placing high-current switching loops beneath sensitive input or clock nets. Verify courtyard, paste, and solder-mask patterns against the current package drawing before fabrication.

Design the supply network for the stated 2.5 V to 3.3 V operating range and place the required bulk and local decoupling capacitors close to their associated supply pins. Separate noisy switching-regulator paths from analog or sensor inputs, and verify startup, brownout, and shutdown behavior against the complete power tree. Do not estimate the power budget from CPU frequency alone; include peripherals, external pull networks, LEDs, communications, and leakage paths when calculating average and peak current.

Avoid treating a same-package MCU as a drop-in replacement unless its memory, pin multiplexing, peripheral set, clock behavior, and software requirements match. EFM32G280 devices with larger flash capacities are not equivalent substitutes for the 32 kB F32 configuration, and a cross-brand Cortex-M3 part can require different peripheral initialization, pin assignments, and driver support. Confirm startup files, SDK compatibility, boot behavior, and programming connections before committing an alternative to a production schematic.

Preserve a quiet return path for every signal crossing between analog sensing, digital control, and external communications. Keep clock traces short and avoid routing them parallel to switching-node copper. Where a connector exposes external signals, place protection components near the connector rather than near the MCU so surge current is stopped before entering the board. Use the EFM32G280F32-QFP100’s 86 digital I/O pins intentionally; excess connections can create unnecessary leakage and complicate firmware ownership.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Material-compliance declarations must be confirmed for the exact orderable MPN through current Silicon Labs documentation.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

EFM32G280F32-QFP100 EFM32G280F32-QFP100 datasheet EFM32G280F32-QFP100 datasheet pdf EFM32G280F32-QFP100 pinout EFM32G280F32-QFP100 schematic EFM32G280F32-QFP100 equivalent EFM32G280F32-QFP100 replacement EFM32G280F32-QFP100 cross reference EFM32G280F32-QFP100 vs EFM32G280F32G-E-QFP100 EFM32G280F32-QFP100 footprint EFM32G280F32-QFP100 price EFM32G280F32-QFP100 stock Silicon Labs EFM32G280F32-QFP100 EFM32G280F32 32MHz 32KB flash 8KB RAM EFM32G280F32 LQFP-100 pinout

関連部品&用語

Silicon Labs EFM32G280F32-QFP100 EFM32G280F32G-E-QFP100 EFM32G280F128-QFP100 EFM32 Gecko ARM Cortex-M3 32-bit microcontroller MCU embedded controller semiconductor low-power platform energy-saving mode fast wake-up 32 kB flash memory 8 kB RAM 86 digital I/O pins three 16-bit timers 32 MHz CPU 100-LQFP LQFP package family surface-mount package 2.5 V to 3.3 V supply industrial condition monitoring low-power sensor node
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示