EFM32G840F32G-E-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs
部品番号: EFM32G840F32G-E-QFN64 ✓ 生産中EFM32G840F32G-E-QFN64 概要
An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-computing processor core integrated with memory, peripherals, and interfaces on one semiconductor die. Within the embedded-system hierarchy, the EFM32G840 belongs to the Gecko family of 32-bit microcontrollers, where the Cortex-M3 core executes firmware while autonomous peripherals can handle timing, communications, analog functions, and system events with limited CPU involvement.
Key features include a 1.98 V to 3.8 V operating supply range, 32 kB of Flash, 8 kB of RAM, and 56 digital I/O pins. Its three 16-bit timers support periodic and capture functions, while the LCD interface supports four 24-bit display segments. AES acceleration adds hardware-assisted encryption for devices handling protected data, reducing the processing burden associated with cryptographic operations.
The Gecko architecture emphasizes low-power operation, fast wake-up behavior, and energy-saving modes. The EFM32G family can consume as little as 0.6 uA in Stop mode according to the Silicon Labs EFM32G datasheet. The same datasheet identifies run-mode consumption as 180 uA/MHz, while autonomous peripherals allow background tasks to continue without constant CPU polling.
Typical applications include battery-powered sensor nodes, industrial monitoring equipment, compact user-interface controllers, security and access systems, connected meters, and low-power embedded instruments. The 56-pin I/O count provides substantial connectivity for sensors, displays, communications, and discrete controls while the 9 x 9 mm QFN package supports space-constrained board layouts.
Designers should preserve the exposed-pad thermal and electrical requirements of the 64-QFN package, place decoupling capacitors close to the supply pins, and use the manufacturer’s pin-description table when assigning board nets. Firmware capacity must also be reviewed carefully when comparing devices with different Flash or RAM configurations, even when the package and core remain compatible.
This product summary consolidates the EFM32G840F32G-E-QFN64 electrical characteristics, family-level alternatives, package considerations, and embedded-design guidance into an engineering-focused reference that complements the complete Silicon Labs EFM32G datasheet and device documentation.
ドロップイン代替品: EFM32G840F32G-E-QFN64 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EFM32G840F32G-E-QFN64 (同一形状・フットプリント) — 相違点: Package, Digital I/O Pins, Flash Memory, RAM.
EFM32G840F64G-E-QFN64
✅ ドロップイン📋 参考代替品(カタログ未掲載)
EFM32G840F64-QFN64
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32G840F32-QFN64
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32G840F32G-E-QFN64R
✅ ドロップイン📋 参考代替品(カタログ未掲載)
EFM32G840F32-QFN64T
✅ ドロップイン📋 参考代替品(カタログ未掲載)
EFM32G840F32G-E-QFN64 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 kB |
| RAM | 8 kB |
| Digital I/O Pins | 56 pins |
| Timers | 3 x 16-bit timers |
| LCD Support | 4 x 24-bit LCD segments |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Processor Architecture | ARM Cortex-M3, 32-bit RISC |
| Security Feature | AES hardware accelerator |
| パッケージ | 64-QFN, 9 x 9 mm |
| 実装タイプ | Surface mount |
| Run-Mode Current Consumption | 180 uA/MHz |
| Stop-Mode Current Consumption | 0.6 uA |
| Program Memory Organization | 32K x 8 bits |
EFM32G840F32G-E-QFN64 64-qfn, 9 x 9 mm ピン配置ガイド
EFM32G840F32G-E-QFN64 (64-qfn, 9 x 9 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EFM32G840F32G-E-QFN64.
詳細は データシート をご参照ください。
主な用途
EFM32G840F32G-E-QFN64 の用途: 6 件s: Battery-Powered Sensor Node, Industrial Monitoring Controller, LCD User Interface Controller, Access-Control and Security Module, Connected Energy Meter, Compact Test and Measurement Instrument.
Battery-Powered Sensor Node
The EFM32G840F32G-E-QFN64 fits low-power sensor nodes that need more processing capability than an 8-bit controller without adopting a larger Cortex-M system. Its 32 MHz ARM Cortex-M3 core supports event handling, local filtering, and protocol processing, while 8 kB RAM can hold temporary measurements and control state. The Silicon Labs EFM32G datasheet identifies Stop-mode consumption as low as 0.6 uA, making low-duty-cycle sensing practical. Its 56 digital I/O pins also allow multiple sensors, indicators, and wake sources to share a compact board. Design the firmware to leave unused peripherals disabled, measure the complete sleep cycle rather than the MCU alone, and size the energy storage using the measured average current.
おすすめ
Industrial Monitoring Controller
The EFM32G840F32G-E-QFN64 is appropriate for industrial monitoring equipment that must combine digital sensing, local logic, and low-power operation. Its 32 MHz Cortex-M3 core can execute control and communication routines, and its three 16-bit timers provide resources for periodic sampling, input capture, and output timing. The 1.98 V to 3.8 V operating range supports 2.5 V and 3.3 V system rails, while 56 I/O pins reduce the need for external I/O expansion. In a production design, isolate noisy inputs, provide local bypass capacitance at the supply pins, and validate timing margins across temperature. The Gecko family’s autonomous peripherals can also reduce CPU wake-up frequency when monitoring mostly consists of periodic events.
おすすめ
LCD User Interface Controller
The EFM32G840F32G-E-QFN64 suits compact instruments and control panels requiring a segmented LCD and several physical inputs. Its display interface supports four 24-bit LCD segments, while 56 digital I/O pins can accommodate buttons, indicators, encoders, and status LEDs. The Cortex-M3 core handles menu logic, debouncing, measurement display, and serial communication without requiring a separate display controller. Because the package exposes 56 pins in a 9 x 9 mm footprint, routing can still become the constraint; place the LCD connectors and controls according to the pin-description table and keep sensitive analog or communications paths away from fast-switching nodes. Firmware should use the low-power LCD-retention and sleep capabilities where display persistence permits.
おすすめ
Access-Control and Security Module
The EFM32G840F32G-E-QFN64 can serve as the controller in compact access-control readers, credential terminals, and security-related embedded equipment. Its AES hardware accelerator provides a dedicated mechanism for cryptographic operations, while the 32 MHz Cortex-M3 core can coordinate credential reading, local decisions, indicators, and host communications. The 8 kB RAM supports temporary protocol buffers, but applications with larger buffers or extensive security libraries should evaluate the F64 family members for 16 kB RAM and 64 kB Flash. Key material must not be stored in unprotected general-purpose memory, and physical tamper response should be designed separately from the microcontroller firmware. Production firmware also needs controlled updates, authentication, and rollback procedures.
おすすめ
Connected Energy Meter
The EFM32G840F32G-E-QFN64 is well matched to compact energy-metering and utility-terminal designs where standby power and real-time control are important. The Cortex-M3 core can process measurements and maintain a metering schedule, while three 16-bit timers support accurate pulse capture, time bases, and periodic output events. A 1.98 V to 3.8 V supply range accommodates low-energy embedded rails, and the 56 I/O pins support sensor inputs, display outputs, and communications. Low-power operation is central to the Gecko architecture, with Stop-mode current reported as low as 0.6 uA. Nevertheless, meter accuracy depends on the analog front end, crystal or clock implementation, calibration data, and energy budget; validate the complete measurement path rather than attributing accuracy solely to the microcontroller.
おすすめ
Compact Test and Measurement Instrument
The EFM32G840F32G-E-QFN64 can serve as the control processor in a compact handheld or embedded measurement instrument. Its 32 MHz Cortex-M3 performance supports real-time sampling coordination, user-interface logic, calibration handling, and communication with external converters or sensors. The 56-pin count provides room for digital controls and status signals, while the 1.98 V to 3.8 V supply range supports mixed low-voltage test equipment. The device’s timers and autonomous peripherals can organize acquisition sequences and reduce CPU intervention between measurements. For precision applications, keep high-speed and sensitive analog routing separate from MCU traces, use a stable low-noise supply, and follow the exposed-pad land pattern. Memory planning should account for measurement algorithms, calibration tables, communications stacks, and update code.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EFM32G840F32G-E-QFN64 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EFM32G840F64G-E-QFN64 | EFM32G840F64-QFN64 | EFM32G840F32-QFN64 | EFM32G840F32G-E-QFN64R | EFM32G840F32-QFN64T |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-QFN (9x9) | 64-QFN (9x9) | 64-QFN (9x9) | 64-QFN (9x9) | 64-QFN (9x9) | 64-QFN (9x9) |
主な差別化要因
- Broader memory availability in the same physical device family (vs EFM32TG840F8-QFN64)
- Higher RAM and Flash capacity while retaining the Gecko architecture (vs EFM32G840F32-QFN64)
- Three 16-bit timers support more peripheral timing functions (vs EFM32TG840F8-QFN64)
- Substantially greater code and data capacity within the same package outline (vs EFM32G840F64-QFN64)
設計ノート
Place the required supply bypass capacitors close to the VDD and ground pins, and connect the exposed thermal pad to the ground plane with a short, low-impedance path. The 1.98 V to 3.8 V operating range makes it important to verify brownout behavior, regulator tolerance, startup sequencing, and the voltage at the die under worst-case load. The Gecko family can enter Stop mode at currents as low as 0.6 uA, but the complete system current depends on sensors, pull networks, communications hardware, and regulator quiescent current.
Use the manufacturer’s 64-QFN land pattern and pin-description table for the final footprint. Keep the exposed-pad vias concentrated beneath the thermal land while maintaining separation from sensitive signal routes. Because the 9 x 9 mm package offers 56 digital I/O pins, route debug, communication, LCD, and control signals according to priority and keep switching-node copper away from analog inputs. Check exposed-pad soldering and thermal performance on the actual PCB stack-up rather than relying only on a nominal board-layout calculation.
Do not treat the F32 and F64 Gecko devices as interchangeable solely because they share a 64-QFN footprint. The F32 configuration has 32 kB Flash and 8 kB RAM, while the F64 configuration doubles both capacities. Review linker placement, boot code, update mechanisms, stack requirements, and peripheral usage before substituting. Also confirm the ordering and shipment suffix so the assembly format matches the PCB-side pick-and-place and production logistics requirements.
Assign communication interfaces according to the datasheet’s alternate-function and pin-muxing table rather than choosing pins only by availability. Keep clock, debug, and high-speed communication traces away from antenna keep-outs, switching power nodes, and high-impedance sensor inputs. If an external sensor or radio shares the board, route its supply and ground connections carefully and test wake-up behavior with the system’s real peripheral load. Autonomous EFM32 peripherals can reduce CPU activity, but their clock and interrupt setup must still be validated under all operating modes.
コンプライアンス情報
The EFM32G family datasheet and product documentation do not provide explicit compliance conclusions in the cited technical summaries. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact ordering code before qualification.