Silicon Labs

EFM32G840F32G-E-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs

MPN: EFM32G840F32G-E-QFN64 ✓ פעיל
1.98 V to 3.8 V Vdss 180 uA/MHz Id 64-QFN, 9 x 9 mm Package 32 MHz Speed 32 kB Memory
כמות הזמנה מינימלית: 1 |

EFM32G840F32G-E-QFN64 סקירה

Silicon Labs EFM32G840F32G-E-QFN64 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 kB Flash memory, 8 kB RAM, 56 digital I/O pins, and a 64-QFN 9 x 9 mm package. The device also provides four 24-bit LCD segments, three 16-bit timers, and AES hardware acceleration for compact, energy-conscious embedded systems.

An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-computing processor core integrated with memory, peripherals, and interfaces on one semiconductor die. Within the embedded-system hierarchy, the EFM32G840 belongs to the Gecko family of 32-bit microcontrollers, where the Cortex-M3 core executes firmware while autonomous peripherals can handle timing, communications, analog functions, and system events with limited CPU involvement.

Key features include a 1.98 V to 3.8 V operating supply range, 32 kB of Flash, 8 kB of RAM, and 56 digital I/O pins. Its three 16-bit timers support periodic and capture functions, while the LCD interface supports four 24-bit display segments. AES acceleration adds hardware-assisted encryption for devices handling protected data, reducing the processing burden associated with cryptographic operations.

The Gecko architecture emphasizes low-power operation, fast wake-up behavior, and energy-saving modes. The EFM32G family can consume as little as 0.6 uA in Stop mode according to the Silicon Labs EFM32G datasheet. The same datasheet identifies run-mode consumption as 180 uA/MHz, while autonomous peripherals allow background tasks to continue without constant CPU polling.

Typical applications include battery-powered sensor nodes, industrial monitoring equipment, compact user-interface controllers, security and access systems, connected meters, and low-power embedded instruments. The 56-pin I/O count provides substantial connectivity for sensors, displays, communications, and discrete controls while the 9 x 9 mm QFN package supports space-constrained board layouts.

Designers should preserve the exposed-pad thermal and electrical requirements of the 64-QFN package, place decoupling capacitors close to the supply pins, and use the manufacturer’s pin-description table when assigning board nets. Firmware capacity must also be reviewed carefully when comparing devices with different Flash or RAM configurations, even when the package and core remain compatible.

This product summary consolidates the EFM32G840F32G-E-QFN64 electrical characteristics, family-level alternatives, package considerations, and embedded-design guidance into an engineering-focused reference that complements the complete Silicon Labs EFM32G datasheet and device documentation.

חלופות תחליף ישיר עבור EFM32G840F32G-E-QFN64 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם EFM32G840F32G-E-QFN64 (אותו גורם צורה וטביעת רגל) — שונים ב Package, Digital I/O Pins, Flash Memory, RAM.

Silicon Labs
Package: 64-QFN (9 x 9 mm) with exposed pad
Digital I/O Pins: 56
השווה עם EFM32G840F32G-E-QFN64 →
Silicon Labs
Package: 64-QFN, 9 mm x 9 mm
Flash Memory: 64 kB
RAM: 16 kB
השווה עם EFM32G840F32G-E-QFN64 →

EFM32G840F64G-E-QFN64

✅ Drop-In
📦 64-QFN (9x9)
Same 32 MHz Cortex-M3 core and 64-QFN footprint; Flash increases from 32 kB to 64 kB (+100%) and RAM from 8 kB to 16 kB (+100%).

📋 חלופה להתייחסות (לא בקטלוג)

EFM32G840F64-QFN64

✅ Drop-In
Silicon Labs
📦 64-QFN (9x9)
32-bit ARM Cortex-M3 microcontroller · 32 MHz · 64 kB · 16 kB · 56 pins · 3 x 16-bit timers · 1.98 V to 3.8 V · 64-QFN, 9 mm x 9 mm

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

EFM32G840F32-QFN64

✅ Drop-In
Silicon Labs
📦 64-QFN (9x9)
ARM Cortex-M3 · 32-bit RISC · 32 MHz · 32 kB · 8 kB · 56 · 3 x 16-bit timers · 1.98 V to 3.8 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

EFM32G840F32G-E-QFN64R

✅ Drop-In
📦 64-QFN (9x9)
Same 32 MHz Cortex-M3, 32 kB Flash, 8 kB RAM, and 64-QFN footprint; R denotes a different shipment configuration with 0% key-parameter difference.

📋 חלופה להתייחסות (לא בקטלוג)

EFM32G840F32-QFN64T

✅ Drop-In
📦 64-QFN (9x9)
Same Cortex-M3 core, 32 MHz speed, 32 kB Flash, 8 kB RAM, and 64-QFN footprint; T denotes a distinct shipment configuration with 0% key-parameter difference.

📋 חלופה להתייחסות (לא בקטלוג)

EFM32G840F32G-E-QFN64 דירוגים מרביים ומאפיינים חשמליים

Product Type 32-bit ARM Cortex-M3 microcontroller
Maximum CPU Frequency 32 MHz
Flash Memory 32 kB
RAM 8 kB
Digital I/O Pins 56 pins
Timers 3 x 16-bit timers
LCD Support 4 x 24-bit LCD segments
Supply Voltage Range 1.98 V to 3.8 V
Processor Architecture ARM Cortex-M3, 32-bit RISC
Security Feature AES hardware accelerator
מארז 64-QFN, 9 x 9 mm
סוג הרכבה Surface mount
Run-Mode Current Consumption 180 uA/MHz
Stop-Mode Current Consumption 0.6 uA
Program Memory Organization 32K x 8 bits

מדריך תצורת פינים של EFM32G840F32G-E-QFN64 64-qfn, 9 x 9 mm

תצורת פינים עבור EFM32G840F32G-E-QFN64 (מארזת 64-qfn, 9 x 9 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 64-qfn, 9 x 9 mm עבור EFM32G840F32G-E-QFN64

אין נתוני פריסת פינים מפורטים עבור EFM32G840F32G-E-QFN64.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

EFM32G840F32G-E-QFN64 מתאים עבור 6 יישוםs: Battery-Powered Sensor Node, Industrial Monitoring Controller, LCD User Interface Controller, Access-Control and Security Module, Connected Energy Meter, Compact Test and Measurement Instrument.

🧩

Battery-Powered Sensor Node

The EFM32G840F32G-E-QFN64 fits low-power sensor nodes that need more processing capability than an 8-bit controller without adopting a larger Cortex-M system. Its 32 MHz ARM Cortex-M3 core supports event handling, local filtering, and protocol processing, while 8 kB RAM can hold temporary measurements and control state. The Silicon Labs EFM32G datasheet identifies Stop-mode consumption as low as 0.6 uA, making low-duty-cycle sensing practical. Its 56 digital I/O pins also allow multiple sensors, indicators, and wake sources to share a compact board. Design the firmware to leave unused peripherals disabled, measure the complete sleep cycle rather than the MCU alone, and size the energy storage using the measured average current.

🏭

Industrial Monitoring Controller

The EFM32G840F32G-E-QFN64 is appropriate for industrial monitoring equipment that must combine digital sensing, local logic, and low-power operation. Its 32 MHz Cortex-M3 core can execute control and communication routines, and its three 16-bit timers provide resources for periodic sampling, input capture, and output timing. The 1.98 V to 3.8 V operating range supports 2.5 V and 3.3 V system rails, while 56 I/O pins reduce the need for external I/O expansion. In a production design, isolate noisy inputs, provide local bypass capacitance at the supply pins, and validate timing margins across temperature. The Gecko family’s autonomous peripherals can also reduce CPU wake-up frequency when monitoring mostly consists of periodic events.

📺

LCD User Interface Controller

The EFM32G840F32G-E-QFN64 suits compact instruments and control panels requiring a segmented LCD and several physical inputs. Its display interface supports four 24-bit LCD segments, while 56 digital I/O pins can accommodate buttons, indicators, encoders, and status LEDs. The Cortex-M3 core handles menu logic, debouncing, measurement display, and serial communication without requiring a separate display controller. Because the package exposes 56 pins in a 9 x 9 mm footprint, routing can still become the constraint; place the LCD connectors and controls according to the pin-description table and keep sensitive analog or communications paths away from fast-switching nodes. Firmware should use the low-power LCD-retention and sleep capabilities where display persistence permits.

🔒

Access-Control and Security Module

The EFM32G840F32G-E-QFN64 can serve as the controller in compact access-control readers, credential terminals, and security-related embedded equipment. Its AES hardware accelerator provides a dedicated mechanism for cryptographic operations, while the 32 MHz Cortex-M3 core can coordinate credential reading, local decisions, indicators, and host communications. The 8 kB RAM supports temporary protocol buffers, but applications with larger buffers or extensive security libraries should evaluate the F64 family members for 16 kB RAM and 64 kB Flash. Key material must not be stored in unprotected general-purpose memory, and physical tamper response should be designed separately from the microcontroller firmware. Production firmware also needs controlled updates, authentication, and rollback procedures.

⚡

Connected Energy Meter

The EFM32G840F32G-E-QFN64 is well matched to compact energy-metering and utility-terminal designs where standby power and real-time control are important. The Cortex-M3 core can process measurements and maintain a metering schedule, while three 16-bit timers support accurate pulse capture, time bases, and periodic output events. A 1.98 V to 3.8 V supply range accommodates low-energy embedded rails, and the 56 I/O pins support sensor inputs, display outputs, and communications. Low-power operation is central to the Gecko architecture, with Stop-mode current reported as low as 0.6 uA. Nevertheless, meter accuracy depends on the analog front end, crystal or clock implementation, calibration data, and energy budget; validate the complete measurement path rather than attributing accuracy solely to the microcontroller.

🔧

Compact Test and Measurement Instrument

The EFM32G840F32G-E-QFN64 can serve as the control processor in a compact handheld or embedded measurement instrument. Its 32 MHz Cortex-M3 performance supports real-time sampling coordination, user-interface logic, calibration handling, and communication with external converters or sensors. The 56-pin count provides room for digital controls and status signals, while the 1.98 V to 3.8 V supply range supports mixed low-voltage test equipment. The device’s timers and autonomous peripherals can organize acquisition sequences and reduce CPU intervention between measurements. For precision applications, keep high-speed and sensitive analog routing separate from MCU traces, use a stable low-noise supply, and follow the exposed-pad land pattern. Memory planning should account for measurement algorithms, calibration tables, communications stacks, and update code.

What is the EFM32G840F32G-E-QFN64?
The EFM32G840F32G-E-QFN64 is a Silicon Labs 32-bit ARM Cortex-M3 microcontroller rated for operation up to 32 MHz. It integrates 32 kB Flash, 8 kB RAM, 56 digital I/O pins, three 16-bit timers, support for four 24-bit LCD segments, and AES hardware acceleration in a 64-QFN 9 x 9 mm package. According to the Silicon Labs EFM32G datasheet, the Gecko platform is designed for energy-sensitive embedded systems using low-power modes and autonomous peripherals.
What are the key specifications of EFM32G840F32G-E-QFN64?
The EFM32G840F32G-E-QFN64 combines a 32 MHz ARM Cortex-M3 core with 32 kB Flash, 8 kB RAM, and 56 digital I/O pins in a 64-QFN package. Its principal peripherals include three 16-bit timers, four 24-bit LCD segments, and an AES accelerator. The Silicon Labs EFM32G datasheet specifies a 1.98 V to 3.8 V supply range, 0.6 uA Stop-mode consumption, and 180 uA/MHz run-mode consumption for low-power designs.
Where can I download the EFM32G840F32G-E-QFN64 datasheet PDF?
The EFM32G840F32G-E-QFN64 datasheet PDF is available from Silicon Labs at the official EFM32G datasheet URL listed on this page. The document covers the Gecko family architecture, electrical characteristics, memory map, peripherals, package information, and operating limits. For the exact ordering code EFM32G840F32G-E-QFN64, also use the manufacturer device page to confirm package, memory configuration, and ordering information.
Where can I find the EFM32G840F32G-E-QFN64 pinout?
The definitive EFM32G840F32G-E-QFN64 pinout is shown in the package-pin section of the Silicon Labs EFM32G datasheet and the associated device documentation. The package is a 64-QFN measuring 9 x 9 mm and includes an exposed pad. Use the pin-description table when assigning power, ground, I/O, communication, debug, and peripheral signals rather than inferring a pinout from a 64-pin drawing alone.
What can replace the EFM32G840F32G-E-QFN64?
The closest pin-compatible replacements are Silicon Labs EFM32G840F64G-E-QFN64 and EFM32G840F64-QFN64, which use the same 64-QFN 9 x 9 mm format and retain the 32 MHz Cortex-M3 core. They increase Flash from 32 kB to 64 kB and RAM from 8 kB to 16 kB, so firmware and memory assumptions must be reviewed. No cross-brand drop-in replacement with verified pin compatibility was identified.
Is EFM32G840F32G-E-QFN64 the same as EFM32G840F64G-E-QFN64?
No, the EFM32G840F32G-E-QFN64 and EFM32G840F64G-E-QFN64 share the Cortex-M3 core, 32 MHz operating speed, and 64-QFN 9 x 9 mm package, but their memory capacities differ. The F32 device has 32 kB Flash and 8 kB RAM, while the F64 device has 64 kB Flash and 16 kB RAM. The F64 part can be a physical drop-in candidate, but existing firmware and memory budgeting must be validated.
When should I choose EFM32G840F32G-E-QFN64 over EFM32G840F64G-E-QFN64?
Choose the EFM32G840F32G-E-QFN64 when a fixed design needs the same 32 MHz Cortex-M3 performance, 56 digital I/O pins, 1.98 V to 3.8 V supply range, and 64-QFN footprint as the F64 device but its firmware comfortably fits within 32 kB Flash and 8 kB RAM. Choose the F64 variant when expanded memory is needed or when retaining extra memory headroom simplifies future firmware updates.
Is EFM32G840F32G-E-QFN64 suitable for battery-powered devices?
Yes, the EFM32G840F32G-E-QFN64 is suitable for battery-powered devices because the Gecko architecture emphasizes low-power operation and autonomous peripherals. According to the Silicon Labs EFM32G datasheet, Stop-mode consumption can be as low as 0.6 uA, while run-mode consumption is 180 uA/MHz. Actual battery life also depends on the duty cycle, sensor load, radio activity, regulator efficiency, and firmware wake-up behavior.
What is the difference between EFM32G840F32G-E-QFN64 and EFM32TG840F8-QFN64?
The EFM32G840F32G-E-QFN64 has 32 kB Flash, 8 kB RAM, and three 16-bit timers, while the EFM32TG840F8-QFN64 has 8 kB Flash, 2 kB RAM, and two 16-bit timers. Both are Cortex-M3 devices rated up to 32 MHz and use a 64-QFN 9 x 9 mm package, but the reduced memory and timer resources of the Tiny Gecko device make it a functionally related option rather than an equivalent replacement.
Where to buy EFM32G840F32G-E-QFN64 online?
Use the Request a Quote form on this page to request the EFM32G840F32G-E-QFN64 with the required quantity and packaging details. The form allows the request to include the exact 64-QFN ordering code and current commercial terms without relying on a static price. A Silicon Labs device page and manufacturer datasheet are linked here for technical confirmation before submitting the request.
What is the price of EFM32G840F32G-E-QFN64?
Current commercial pricing for the EFM32G840F32G-E-QFN64 is handled through the Request a Quote form on this page. Submit the required quantity, packaging preference, and target project information to obtain an updated quotation. The EFM32G840F32G-E-QFN64 is a 32 MHz Cortex-M3 device with 32 kB Flash, 8 kB RAM, and a 64-QFN 9 x 9 mm package, so the quote should reference that complete ordering code.
What is the lead time for EFM32G840F32G-E-QFN64?
Request the current lead time and minimum-order quantity through the Request a Quote form on this page. Lead time can depend on the exact ordering suffix, package shipment configuration, order quantity, and current manufacturing availability, so it should be confirmed for the intended production plan. The requested line item should state EFM32G840F32G-E-QFN64 exactly to avoid ambiguity with related tray, tape-and-reel, or memory-capacity variants.
Is EFM32G840F32G-E-QFN64 in stock?
Use the Request a Quote form on this page to request current stock and delivery confirmation for EFM32G840F32G-E-QFN64. Availability should be checked against the exact ordering code, required quantity, and shipment packaging. The device is identified by Silicon Labs as a 32 MHz Cortex-M3 microcontroller with 32 kB Flash, 8 kB RAM, and a 64-QFN 9 x 9 mm package.
What is the best cross-brand equivalent for EFM32G840F32G-E-QFN64?
No cross-brand equivalent with verified pin-to-pin compatibility was identified for the EFM32G840F32G-E-QFN64. The MCU depends on Silicon Labs peripheral functions, memory mapping, startup support, and tool ecosystem, so an electrically similar 64-pin Cortex-M3 device may not be a true drop-in replacement. If a cross-brand migration is mandatory, request engineering review of the candidate pinout, clock tree, memory organization, peripherals, and firmware dependencies.
Does EFM32G840F32G-E-QFN64 support AES encryption?
Yes, the EFM32G840F32G-E-QFN64 includes AES hardware acceleration according to the manufacturer product information. The dedicated accelerator allows cryptographic operations to execute with less CPU involvement than a software-only implementation, which is useful for access-control, metering, industrial monitoring, and connected equipment. The final security design still requires appropriate key management, firmware implementation, and threat analysis.

נתוני עזר הנדסיים עבור EFM32G840F32G-E-QFN64 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the EFM32G840F32G-E-QFN64 when the application requires a 32 MHz Cortex-M3 core, low-power Gecko operation, 32 kB Flash, 8 kB RAM, and 56 digital I/O pins in a 64-QFN 9 x 9 mm package. Choose EFM32G840F64G-E-QFN64 when the same core and footprint are needed but firmware, buffering, or future updates exceed the F32 memory budget; its 64 kB Flash and 16 kB RAM reduce memory pressure. EFM32G840F64-QFN64 provides the same expanded memory capability under a different ordering configuration. The F32 base, R, and T variants are appropriate when electrical parameters are identical and the distinction concerns ordering or shipment format. EFM32TG840F8-QFN64 is more constrained at 8 kB Flash and 2 kB RAM, so it fits only smaller firmware workloads.

השוואה עם חלופות

פרמטר מוצר זה EFM32G840F64G-E-QFN64 EFM32G840F64-QFN64 EFM32G840F32-QFN64 EFM32G840F32G-E-QFN64R EFM32G840F32-QFN64T
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 64-QFN (9x9) 64-QFN (9x9) 64-QFN (9x9) 64-QFN (9x9) 64-QFN (9x9) 64-QFN (9x9)

מבדילים עיקריים

  • Broader memory availability in the same physical device family (לעומתEFM32TG840F8-QFN64)
  • Higher RAM and Flash capacity while retaining the Gecko architecture (לעומתEFM32G840F32-QFN64)
  • Three 16-bit timers support more peripheral timing functions (לעומתEFM32TG840F8-QFN64)
  • Substantially greater code and data capacity within the same package outline (לעומתEFM32G840F64-QFN64)

הערות תכנון

Place the required supply bypass capacitors close to the VDD and ground pins, and connect the exposed thermal pad to the ground plane with a short, low-impedance path. The 1.98 V to 3.8 V operating range makes it important to verify brownout behavior, regulator tolerance, startup sequencing, and the voltage at the die under worst-case load. The Gecko family can enter Stop mode at currents as low as 0.6 uA, but the complete system current depends on sensors, pull networks, communications hardware, and regulator quiescent current.

Use the manufacturer’s 64-QFN land pattern and pin-description table for the final footprint. Keep the exposed-pad vias concentrated beneath the thermal land while maintaining separation from sensitive signal routes. Because the 9 x 9 mm package offers 56 digital I/O pins, route debug, communication, LCD, and control signals according to priority and keep switching-node copper away from analog inputs. Check exposed-pad soldering and thermal performance on the actual PCB stack-up rather than relying only on a nominal board-layout calculation.

Do not treat the F32 and F64 Gecko devices as interchangeable solely because they share a 64-QFN footprint. The F32 configuration has 32 kB Flash and 8 kB RAM, while the F64 configuration doubles both capacities. Review linker placement, boot code, update mechanisms, stack requirements, and peripheral usage before substituting. Also confirm the ordering and shipment suffix so the assembly format matches the PCB-side pick-and-place and production logistics requirements.

Assign communication interfaces according to the datasheet’s alternate-function and pin-muxing table rather than choosing pins only by availability. Keep clock, debug, and high-speed communication traces away from antenna keep-outs, switching power nodes, and high-impedance sensor inputs. If an external sensor or radio shares the board, route its supply and ground connections carefully and test wake-up behavior with the system’s real peripheral load. Autonomous EFM32 peripherals can reduce CPU activity, but their clock and interrupt setup must still be validated under all operating modes.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The EFM32G family datasheet and product documentation do not provide explicit compliance conclusions in the cited technical summaries. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact ordering code before qualification.

הנתונים אומתו בתאריך: 2026-11-19 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

EFM32G840F32G-E-QFN64 datasheet EFM32G840F32G-E-QFN64 pinout EFM32G840F32G-E-QFN64 datasheet pdf EFM32G840F32G-E-QFN64 equivalent EFM32G840F32G-E-QFN64 replacement EFM32G840F32G-E-QFN64 price EFM32G840F32G-E-QFN64 stock Silicon Labs EFM32G840F32G-E-QFN64 EFM32G840F32G-E-QFN64 32MHz Cortex-M3 EFM32G840F32G-E-QFN64 QFN64 EFM32G840F32G-E-QFN64 battery powered EFM32G840F32G-E-QFN64 vs EFM32G840F64G-E-QFN64 64-QFN Cortex-M3 low power MCU EFM32G840F32G-E-QFN64 schematic EFM32G840F32G-E-QFN64 footprint

רכיבים ומונחים קשורים

Silicon Labs EFM32G840F32G-E-QFN64 EFM32G840F64G-E-QFN64 EFM32G840F64-QFN64 EFM32G840F32-QFN64 EFM32TG840F8-QFN64 ARM Cortex-M3 32-bit RISC microcontroller embedded microcontroller Gecko family energy-saving modes autonomous peripheral 32 kB Flash 8 kB RAM 56 digital I/O 16-bit timer segmented LCD AES hardware accelerator 64-QFN QFN family surface mount battery-powered sensor node industrial monitoring 1.98 V to 3.8 V supply
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר