Silicon Labs

EFM32LG230F64-QFN64 - 48MHz Cortex-M3 MCU | Silicon Labs

部品番号: EFM32LG230F64-QFN64 ✓ 生産中
1.98 V to 3.8 V Vdss 0.65 µA Id 64-QFN (9 x 9 mm) Package 48 MHz Speed 64 KB Memory
MOQ: 1 |

EFM32LG230F64-QFN64 概要

Silicon Labs EFM32LG230F64-QFN64 is a 32-bit ARM Cortex-M3 microcontroller operating up to 48 MHz, with 64 KB of Flash memory, 32 KB of RAM, and a 64-QFN 9 x 9 mm package. It belongs to the EFM32LG Leopard Gecko family, combining an energy-efficient embedded processor with integrated analog, timing, communication, and low-power peripherals for compact embedded systems.

A microcontroller is a programmable system-on-chip that combines a CPU core, memory, peripherals, and interface logic on one integrated circuit. The EFM32LG230F64-QFN64 is an ARM Cortex-M3-based MCU in the broader hierarchy of embedded processors, microcontrollers, and semiconductor components. Its 32-bit RISC architecture supports efficient control processing, while the integrated memory and peripherals reduce board area and simplify firmware-driven measurement, communication, and power-management designs.

Key device characteristics include a maximum CPU frequency of 48 MHz, 64 KB of Flash program memory, 32 KB of RAM, 56 general-purpose I/O pins, 16 asynchronous external interrupts, and a 12-channel DMA controller. The EFM32LG family is designed for energy-sensitive products and can consume as little as 0.65 µA in Stop mode and 211 µA/MHz in Run mode. Its operating supply range is 1.98 V to 3.8 V.

The architecture combines the ARM Cortex-M3 processor with the EFM32 energy-management system and autonomous peripherals. Autonomous operation allows selected hardware activities to continue with reduced processor involvement, supporting responsive low-power designs. The Memory Protection Unit supports up to eight memory segments, while the Wake-up Interrupt Controller handles events occurring while the CPU is asleep. These characteristics make the platform suitable for systems that must react quickly while preserving battery life.

Typical applications include battery-powered sensor nodes, industrial monitoring equipment, connected accessories, compact control panels, and low-power IoT products. The 48 MHz Cortex-M3 core provides performance for protocol handling, local control, and data processing, while the 12-channel DMA controller reduces processor load during serial transfers. The integrated analog and timing resources also support measurements, waveform generation, and general-purpose embedded control.

When laying out a board, place decoupling capacitors close to the supply pins and follow the EFM32LG230 hardware-design guidance for exposed-pad thermal management and signal routing. Confirm the complete pin assignment and exposed-pad connection against the manufacturer datasheet before fabrication. Firmware should also use the documented clock, reset, and low-power procedures to avoid entering an unintended Stop state.

This product page consolidates the core electrical and packaging specifications, practical application guidance, verified manufacturer references, and same-footprint ordering alternatives. It also highlights the differences between ordering-code variants and the checks engineers should complete before approving a direct PCB substitution.

ドロップイン代替品: EFM32LG230F64-QFN64 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

EFM32LG230F64G-E-QFN64

✅ ドロップイン
📦 64-QFN (9 x 9 mm)
48 MHz core, 64 KB Flash, and 32 KB RAM are identical; ordering-code grade differs, representing approximately 0% change in the listed key ratings

📋 参考代替品(カタログ未掲載)

EFM32LG230F64G-F-QFN64

✅ ドロップイン
📦 64-QFN (9 x 9 mm)
Same EFM32LG230F64 configuration and 64-QFN footprint; F ordering code differs from the target, with approximately 0% change in the listed key ratings

📋 参考代替品(カタログ未掲載)

EFM32LG230F64-QFN64 最大定格&電気的特性

Product Type 32-bit ARM Cortex-M3 microcontroller
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB
RAM Memory 32 KB
General-Purpose I/O Pins 56 pins
Asynchronous External Interrupts 16
DMA Channels 12 channels
動作電源電圧 1.98 V to 3.8 V
Stop Mode Current 0.65 µA
Run Mode Current 211 µA/MHz
Processor Architecture 32-bit ARM Cortex-M3 RISC
Memory Protection Unit Up to 8 memory segments
パッケージ 64-QFN (9 x 9 mm)
実装タイプ Surface mount
Series EFM32LG Leopard Gecko
Low-Power Wake-up Support Wake-up Interrupt Controller

EFM32LG230F64-QFN64 64-qfn (9 x 9 mm) ピン配置ガイド

EFM32LG230F64-QFN64 (64-qfn (9 x 9 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

EFM32LG230F64-QFN64 の 64-qfn (9 x 9 mm) パッケージピン配置図

詳細なピン配置データはありません: EFM32LG230F64-QFN64.

詳細は データシート をご参照ください。

主な用途

EFM32LG230F64-QFN64 の用途: 6 件s: Battery-Powered Sensor Nodes, Industrial Monitoring Equipment, Connected IoT Accessories, Compact Control Panels, Portable Measurement Devices, Low-Power Accessory Controls.

🧩

Battery-Powered Sensor Nodes

The EFM32LG230F64-QFN64 fits compact sensor nodes because the Cortex-M3 core runs up to 48 MHz while the EFM32LG family supports Stop-mode consumption as low as 0.65 µA. A 12-channel DMA controller can move sensor, serial, or memory data with reduced processor intervention, while 64 KB of Flash and 32 KB of RAM support local filtering and protocol state. Designers can place the controller between a low-power sensor and battery-management front end, then use autonomous peripherals and carefully scheduled sleep intervals to control average system demand.

🏭

Industrial Monitoring Equipment

The EFM32LG230F64-QFN64 is suitable for industrial monitoring products that combine sensor acquisition, local logic, and status communications. Its 56 general-purpose I/O pins, 16 asynchronous external interrupts, and 12-channel DMA controller support multiple digital inputs, event capture, and background data movement, while the 48 MHz Cortex-M3 core handles protocol formatting and local control. The 1.98 V to 3.8 V operating range also supports common low-voltage industrial rails when paired with a regulator designed for the required noise and transient margin.

🌐

Connected IoT Accessories

For connected accessories, the EFM32LG230F64-QFN64 provides enough processing performance and memory for control, data packaging, and interface management without requiring a high-power application processor. The 48 MHz ARM Cortex-M3 core can service serial protocols, while DMA reduces interrupt overhead during transfers. Its low-power characteristics are particularly valuable when the accessory spends most of its operating cycle asleep. Wireless functionality should be implemented as a separate module or companion device, allowing the MCU to concentrate on local control and secure peripheral management.

📺

Compact Control Panels

The EFM32LG230F64-QFN64 can serve as the main controller in a compact keypad, display, or machine-control panel where limited space and low standby demand are important. Its 56 general-purpose I/O pins provide connections for buttons, indicators, and discrete interface signals, while the 32-bit Cortex-M3 core supports responsive state-machine and user-interface logic. The 64-QFN 9 x 9 mm package reduces board area, but careful exposed-pad layout, supply decoupling, and signal-integrity practices remain necessary for stable operation.

🖥️

Portable Measurement Devices

The EFM32LG230F64-QFN64 is appropriate for portable measurement instruments that combine signal conditioning, sampling coordination, and local result processing. The 48 MHz Cortex-M3 core provides useful arithmetic capability for filtering and calibration, while 12 DMA channels can support concurrent movement of sampled and peripheral data. Its 32 KB of RAM and 64 KB of Flash provide a practical balance for moderate algorithm sizes. Low-power design should account for analog front-end current, display load, and sensor duty cycle because those loads can dominate total battery consumption.

📱

Low-Power Accessory Controls

The EFM32LG230F64-QFN64 works well in low-power accessory controls that combine push-button input, LED indication, and serial communication. The family can consume as little as 0.65 µA in Stop mode, enabling a design that wakes for short processing intervals and returns to sleep without continuously running the CPU. Sixteen external interrupts support responsive event detection, while the integrated DMA controller can move data during transfers. Firmware should use the documented wake and peripheral-retention procedures so that low-power operation remains deterministic.

What is the EFM32LG230F64-QFN64?
The EFM32LG230F64-QFN64 is a 32-bit ARM Cortex-M3 microcontroller from the Silicon Labs EFM32LG Leopard Gecko family. It operates at up to 48 MHz and provides 64 KB of Flash memory and 32 KB of RAM in a 64-QFN 9 x 9 mm package. According to the Silicon Labs EFM32LG data sheet, the family emphasizes low active and sleep-mode power consumption alongside integrated peripherals for energy-sensitive embedded products.
What are the key specifications of EFM32LG230F64-QFN64?
The principal specifications are a 48 MHz ARM Cortex-M3 core, 64 KB of Flash, 32 KB of RAM, 56 general-purpose I/O pins, 16 asynchronous external interrupts, 12 DMA channels, and a 1.98 V to 3.8 V supply range. Silicon Labs also specifies 0.65 µA Stop-mode current and 211 µA/MHz Run-mode current for the EFM32LG family. These figures make the device suitable for compact, power-conscious embedded control systems.
Where can I download the EFM32LG230F64-QFN64 datasheet PDF?
The official EFM32LG data sheet is available from Silicon Labs at https://www.silabs.com/documents/public/data-sheets/efm32lg-datasheet.pdf. It covers the EFM32LG230 F256, F128, and F64 devices, including electrical characteristics, package information, peripherals, and system behavior. The Keil-hosted EFM32LG230 data sheet is another accessible copy, but the Silicon Labs document should be treated as the primary manufacturer reference.
Where can I find the EFM32LG230F64-QFN64 pinout?
Use the pin-configuration and package drawings in the official Silicon Labs EFM32LG data sheet to locate every EFM32LG230F64-QFN64 pin. The device uses a 64-QFN 9 x 9 mm package, so its exposed-pad and perimeter-pin assignments must be mapped from the manufacturer drawing rather than inferred from the order code. The hardware-design guidance also points engineers to application note AN0002 for PCB implementation considerations.
How much power does the EFM32LG230F64-QFN64 consume?
The EFM32LG family can consume as little as 0.65 µA in Stop mode and 211 µA/MHz in Run mode, according to the Silicon Labs EFM32LG data sheet. Actual product consumption depends on clock configuration, active peripherals, flash activity, GPIO state, and the power mode selected by firmware. These family-level figures should therefore be used as design targets rather than guaranteed board-level consumption.
Where can I buy EFM32LG230F64-QFN64 online?
Use the Request a Quote form on this page to request EFM32LG230F64-QFN64 pricing, availability, lot-size support, and delivery information. Because component availability and commercial terms can change rapidly, a current quotation is more reliable than a static price or inventory claim. Include the exact EFM32LG230F64-QFN64 order code and required quantity in the request.
What is the price of EFM32LG230F64-QFN64?
A current EFM32LG230F64-QFN64 quotation is available through the Request a Quote form on this page. Pricing can vary with order quantity, shipment date, and supply conditions, so the quote form should be used for the exact quantity and configuration needed. The request should identify the complete EFM32LG230F64-QFN64 order code to avoid ambiguity with related EFM32LG230 variants.
What is the lead time for EFM32LG230F64-QFN64?
Request the current EFM32LG230F64-QFN64 lead time through the Request a Quote form on this page. Lead time depends on available stock, the requested quantity, and the delivery date entered by the customer. Providing a firm forecast quantity and required date enables the supply team to confirm the most appropriate fulfillment option for the exact order code.
Is EFM32LG230F64-QFN64 in stock?
The Request a Quote form on this page is the appropriate way to check current EFM32LG230F64-QFN64 availability. Inventory status changes as orders are placed and replenishment occurs, so a static stock statement should not be treated as current. Submit the required quantity, target price, packaging preference, and delivery schedule to receive a current availability and fulfillment response.
What can replace the EFM32LG230F64-QFN64?
The EFM32LG230F64G-E-QFN64 is the closest documented same-family alternative because it retains the EFM32LG230F64 configuration, ARM Cortex-M3 architecture, 48 MHz speed, 64 KB Flash, 32 KB RAM, and 64-QFN 9 x 9 mm package. It is not automatically interchangeable in every design: verify the ordering-code meaning, temperature grade, qualification status, and complete pin assignment before production use.
Is EFM32LG230F64-QFN64 the same as EFM32LG230F64G-E-QFN64?
The two devices share the EFM32LG230F64 core configuration and the same 64-QFN 9 x 9 mm package, with a maximum speed of 48 MHz, 64 KB of Flash, and 32 KB of RAM. The ordering-code difference can encode a specific grade or qualification condition. Confirm that condition, the exposed-pad requirements, and every peripheral assignment against the manufacturer documentation before treating the alternative as a drop-in replacement.
EFM32LG230F64-QFN64 vs EFM32LG230F64G-E-QFN64 — which is better?
Choose EFM32LG230F64-QFN64 when its exact ordering code satisfies the product's temperature and qualification requirements. Consider EFM32LG230F64G-E-QFN64 when its coded grade is suitable for the target environment while preserving the same EFM32LG230F64 memory, Cortex-M3 performance, and QFN footprint. The deciding factor is the meaning of the ordering suffix, not a meaningful difference in the core electrical platform.
When should I choose EFM32LG230F64-QFN64 over another EFM32LG230 variant?
Choose EFM32LG230F64-QFN64 when the design requires exactly 64 KB of Flash, 32 KB of RAM, up to 48 MHz operation, and a 64-QFN 9 x 9 mm footprint. Select a related EFM32LG230 option only when its flash, RAM, package, temperature grade, or qualification better matches the application. The target MPN is preferable when its ordering conditions already meet the product specification without a code change.
Is EFM32LG230F64-QFN64 suitable for battery-powered IoT devices?
The EFM32LG230F64-QFN64 is suitable for many battery-powered IoT products because its EFM32LG family supports Stop-mode current as low as 0.65 µA and Run-mode current of 211 µA/MHz. Actual battery life depends on the duty cycle, radio activity, sensor load, firmware, and regulator efficiency. Low-power peripheral operation and careful firmware control are therefore as important as the headline MCU ratings.
What is the best Silicon Labs equivalent for EFM32LG230F64-QFN64?
EFM32LG230F64G-E-QFN64 is the best-documented Silicon Labs alternative in the EFM32LG230F64G-E-QFN64 comparison because it uses the same 64-QFN 9 x 9 mm package and the same 48 MHz, 64 KB Flash, and 32 KB RAM configuration. Before adoption, verify the exact ordering-code difference and all peripheral pins. No cross-brand drop-in replacement is established because MCU firmware, interrupt mapping, analog functions, and peripheral mix are rarely interchangeable.

エンジニアリング参考データ: EFM32LG230F64-QFN64 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose EFM32LG230F64-QFN64 when a design requires an ARM Cortex-M3 controller with 64 KB of Flash, 32 KB of RAM, operation up to 48 MHz, and a 64-QFN 9 x 9 mm footprint. Consider EFM32LG230F64G-E-QFN64 or EFM32LG230F64G-F-QFN64 when the ordering suffix identifies a grade or qualification condition suitable for the application; both preserve the same family configuration and package. Choose EFM32LG230F256G-E-QFN64 when greater Flash capacity is needed, but review memory size and firmware implications. EFM32G230F64-QFN64 is not a direct performance match because it is listed at up to 32 MHz. No cross-brand drop-in alternative is recommended because MCU peripheral maps, interrupt behavior, analog features, and firmware configuration may differ despite a similar package.

代替品との比較

パラメータ この製品 EFM32LG230F64G-E-QFN64 EFM32LG230F64G-F-QFN64
Brand Silicon Labs Silicon Labs Silicon Labs
Series EFM32LG Leopard Gecko EFM32LG Leopard Gecko EFM32LG230 F64

主な差別化要因

  • Identical core performance and memory configuration (vs EFM32LG230F64G-E-QFN64)
  • Direct family ordering-code alternative (vs EFM32LG230F64G-F-QFN64)
  • Balanced memory and peripheral integration (vs EFM32G230F64-QFN64)

設計ノート

Follow the Silicon Labs EFM32LG230 hardware-design guidance when placing the 64-QFN device. Place the required supply-decoupling components close to their associated pins, provide a low-impedance ground path, and route sensitive inputs away from fast digital and switching nodes. The exposed thermal pad must follow the datasheet's land-pattern and solder requirements; verify the exact pin table and pad connection before releasing the PCB artwork.

Design the supply around the documented 1.98 V to 3.8 V operating range, including tolerance, startup ramp, transient margin, and the voltage required by every attached peripheral. Place bulk and local decoupling according to the reference design and impedance requirements. Avoid connecting external circuits that can back-feed an unpowered domain, and confirm the regulator's quiescent current against the EFM32LG family's low-power goals.

Do not assume that two EFM32LG230 order codes are interchangeable merely because their family names and packages match. Decode the F64, G-E, and G-F ordering portions, then verify temperature grade, qualification status, package drawing, and every peripheral assignment. For firmware migration, also compare interrupt vectors, clock defaults, startup behavior, and peripheral configuration; these functional differences can be more consequential than the shared footprint.

The QFN exposed pad is the primary path for heat transfer into the PCB, so thermal performance depends on the copper area and board construction beneath the package. Keep the exposed-pad connection compliant with the datasheet and provide a continuous ground or thermal plane as specified. At high ambient temperatures or sustained 48 MHz operation, use thermal simulation or measurement to verify that junction temperature remains within the device rating.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The EFM32LG230F64-QFN64 documentation and listing pages do not state the requested compliance values. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status therefore remain unknown. The ordering-code suffix must be reviewed with the manufacturer before assigning an automotive or environmental qualification requirement.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

EFM32LG230F64-QFN64 datasheet EFM32LG230F64-QFN64 pinout EFM32LG230F64-QFN64 specifications EFM32LG230F64-QFN64 equivalent EFM32LG230F64-QFN64 replacement EFM32LG230F64-QFN64 price EFM32LG230F64-QFN64 stock Silicon Labs EFM32LG230F64-QFN64 EFM32LG230F64-QFN64 QFN 64 pin EFM32LG230F64-QFN64 application circuit EFM32LG230F64-QFN64 vs EFM32LG230F64G-E-QFN64 EFM32LG230 48MHz Cortex-M3 microcontroller

関連部品&用語

Silicon Labs EFM32LG230F64-QFN64 EFM32LG230F64G-E-QFN64 EFM32LG230F64G-F-QFN64 EFM32LG230F256G-E-QFN64 EFM32G230F64-QFN64 EFM32LG Leopard Gecko ARM Cortex-M3 microcontroller MCU 32-bit RISC processor embedded processor semiconductor low-power microcontroller energy management system Memory Protection Unit Wake-up Interrupt Controller Direct Memory Access DMA controller 64-QFN QFN package family surface mount Flash memory RAM Stop mode Run mode
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示