EFM32LG230F64-QFN64 - 48MHz Cortex-M3 MCU | Silicon Labs
MPN: EFM32LG230F64-QFN64 ✓ AktifEFM32LG230F64-QFN64 Ringkasan
A microcontroller is a programmable system-on-chip that combines a CPU core, memory, peripherals, and interface logic on one integrated circuit. The EFM32LG230F64-QFN64 is an ARM Cortex-M3-based MCU in the broader hierarchy of embedded processors, microcontrollers, and semiconductor components. Its 32-bit RISC architecture supports efficient control processing, while the integrated memory and peripherals reduce board area and simplify firmware-driven measurement, communication, and power-management designs.
Key device characteristics include a maximum CPU frequency of 48 MHz, 64 KB of Flash program memory, 32 KB of RAM, 56 general-purpose I/O pins, 16 asynchronous external interrupts, and a 12-channel DMA controller. The EFM32LG family is designed for energy-sensitive products and can consume as little as 0.65 µA in Stop mode and 211 µA/MHz in Run mode. Its operating supply range is 1.98 V to 3.8 V.
The architecture combines the ARM Cortex-M3 processor with the EFM32 energy-management system and autonomous peripherals. Autonomous operation allows selected hardware activities to continue with reduced processor involvement, supporting responsive low-power designs. The Memory Protection Unit supports up to eight memory segments, while the Wake-up Interrupt Controller handles events occurring while the CPU is asleep. These characteristics make the platform suitable for systems that must react quickly while preserving battery life.
Typical applications include battery-powered sensor nodes, industrial monitoring equipment, connected accessories, compact control panels, and low-power IoT products. The 48 MHz Cortex-M3 core provides performance for protocol handling, local control, and data processing, while the 12-channel DMA controller reduces processor load during serial transfers. The integrated analog and timing resources also support measurements, waveform generation, and general-purpose embedded control.
When laying out a board, place decoupling capacitors close to the supply pins and follow the EFM32LG230 hardware-design guidance for exposed-pad thermal management and signal routing. Confirm the complete pin assignment and exposed-pad connection against the manufacturer datasheet before fabrication. Firmware should also use the documented clock, reset, and low-power procedures to avoid entering an unintended Stop state.
This product page consolidates the core electrical and packaging specifications, practical application guidance, verified manufacturer references, and same-footprint ordering alternatives. It also highlights the differences between ordering-code variants and the checks engineers should complete before approving a direct PCB substitution.
Pilihan pengganti yang segera untuk EFM32LG230F64-QFN64 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
EFM32LG230F64G-E-QFN64
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
EFM32LG230F64G-F-QFN64
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
EFM32LG230F64-QFN64 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| RAM Memory | 32 KB |
| General-Purpose I/O Pins | 56 pins |
| Asynchronous External Interrupts | 16 |
| DMA Channels | 12 channels |
| Tegangan Pemberi Arus Operasi | 1.98 V to 3.8 V |
| Stop Mode Current | 0.65 µA |
| Run Mode Current | 211 µA/MHz |
| Processor Architecture | 32-bit ARM Cortex-M3 RISC |
| Memory Protection Unit | Up to 8 memory segments |
| Kemasan | 64-QFN (9 x 9 mm) |
| Jenis Pemasangan | Surface mount |
| Series | EFM32LG Leopard Gecko |
| Low-Power Wake-up Support | Wake-up Interrupt Controller |
Panduan Konfigurasi Pin EFM32LG230F64-QFN64 64-qfn (9 x 9 mm)
Konfigurasi pin untuk EFM32LG230F64-QFN64 (64-qfn (9 x 9 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk EFM32LG230F64-QFN64.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
EFM32LG230F64-QFN64 patut untuk 6 aplikasis: Battery-Powered Sensor Nodes, Industrial Monitoring Equipment, Connected IoT Accessories, Compact Control Panels, Portable Measurement Devices, Low-Power Accessory Controls.
Battery-Powered Sensor Nodes
The EFM32LG230F64-QFN64 fits compact sensor nodes because the Cortex-M3 core runs up to 48 MHz while the EFM32LG family supports Stop-mode consumption as low as 0.65 µA. A 12-channel DMA controller can move sensor, serial, or memory data with reduced processor intervention, while 64 KB of Flash and 32 KB of RAM support local filtering and protocol state. Designers can place the controller between a low-power sensor and battery-management front end, then use autonomous peripherals and carefully scheduled sleep intervals to control average system demand.
Disebarkan
Industrial Monitoring Equipment
The EFM32LG230F64-QFN64 is suitable for industrial monitoring products that combine sensor acquisition, local logic, and status communications. Its 56 general-purpose I/O pins, 16 asynchronous external interrupts, and 12-channel DMA controller support multiple digital inputs, event capture, and background data movement, while the 48 MHz Cortex-M3 core handles protocol formatting and local control. The 1.98 V to 3.8 V operating range also supports common low-voltage industrial rails when paired with a regulator designed for the required noise and transient margin.
Disebarkan
Connected IoT Accessories
For connected accessories, the EFM32LG230F64-QFN64 provides enough processing performance and memory for control, data packaging, and interface management without requiring a high-power application processor. The 48 MHz ARM Cortex-M3 core can service serial protocols, while DMA reduces interrupt overhead during transfers. Its low-power characteristics are particularly valuable when the accessory spends most of its operating cycle asleep. Wireless functionality should be implemented as a separate module or companion device, allowing the MCU to concentrate on local control and secure peripheral management.
Disebarkan
Compact Control Panels
The EFM32LG230F64-QFN64 can serve as the main controller in a compact keypad, display, or machine-control panel where limited space and low standby demand are important. Its 56 general-purpose I/O pins provide connections for buttons, indicators, and discrete interface signals, while the 32-bit Cortex-M3 core supports responsive state-machine and user-interface logic. The 64-QFN 9 x 9 mm package reduces board area, but careful exposed-pad layout, supply decoupling, and signal-integrity practices remain necessary for stable operation.
Disebarkan
Portable Measurement Devices
The EFM32LG230F64-QFN64 is appropriate for portable measurement instruments that combine signal conditioning, sampling coordination, and local result processing. The 48 MHz Cortex-M3 core provides useful arithmetic capability for filtering and calibration, while 12 DMA channels can support concurrent movement of sampled and peripheral data. Its 32 KB of RAM and 64 KB of Flash provide a practical balance for moderate algorithm sizes. Low-power design should account for analog front-end current, display load, and sensor duty cycle because those loads can dominate total battery consumption.
Disebarkan
Low-Power Accessory Controls
The EFM32LG230F64-QFN64 works well in low-power accessory controls that combine push-button input, LED indication, and serial communication. The family can consume as little as 0.65 µA in Stop mode, enabling a design that wakes for short processing intervals and returns to sleep without continuously running the CPU. Sixteen external interrupts support responsive event detection, while the integrated DMA controller can move data during transfers. Firmware should use the documented wake and peripheral-retention procedures so that low-power operation remains deterministic.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk EFM32LG230F64-QFN64 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | EFM32LG230F64G-E-QFN64 | EFM32LG230F64G-F-QFN64 |
|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Series | EFM32LG Leopard Gecko | EFM32LG Leopard Gecko | EFM32LG230 F64 |
Penyeberangsung Jelas
- Identical core performance and memory configuration (vsEFM32LG230F64G-E-QFN64)
- Direct family ordering-code alternative (vsEFM32LG230F64G-F-QFN64)
- Balanced memory and peripheral integration (vsEFM32G230F64-QFN64)
Catatan Desain
Follow the Silicon Labs EFM32LG230 hardware-design guidance when placing the 64-QFN device. Place the required supply-decoupling components close to their associated pins, provide a low-impedance ground path, and route sensitive inputs away from fast digital and switching nodes. The exposed thermal pad must follow the datasheet's land-pattern and solder requirements; verify the exact pin table and pad connection before releasing the PCB artwork.
Design the supply around the documented 1.98 V to 3.8 V operating range, including tolerance, startup ramp, transient margin, and the voltage required by every attached peripheral. Place bulk and local decoupling according to the reference design and impedance requirements. Avoid connecting external circuits that can back-feed an unpowered domain, and confirm the regulator's quiescent current against the EFM32LG family's low-power goals.
Do not assume that two EFM32LG230 order codes are interchangeable merely because their family names and packages match. Decode the F64, G-E, and G-F ordering portions, then verify temperature grade, qualification status, package drawing, and every peripheral assignment. For firmware migration, also compare interrupt vectors, clock defaults, startup behavior, and peripheral configuration; these functional differences can be more consequential than the shared footprint.
The QFN exposed pad is the primary path for heat transfer into the PCB, so thermal performance depends on the copper area and board construction beneath the package. Keep the exposed-pad connection compliant with the datasheet and provide a continuous ground or thermal plane as specified. At high ambient temperatures or sustained 48 MHz operation, use thermal simulation or measurement to verify that junction temperature remains within the device rating.
Maklumat Kesediaan
The EFM32LG230F64-QFN64 documentation and listing pages do not state the requested compliance values. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status therefore remain unknown. The ordering-code suffix must be reviewed with the manufacturer before assigning an automotive or environmental qualification requirement.